Printability and Shape Fidelity of Bioinks in 3D Bioprinting
Open accessThe DOI matches its Crossref record; 285 of the 287 references it cites were found in a registry or an index, and 1 are not checked yet.
Abstract
Three-dimensional bioprinting uses additive manufacturing techniques for the automated fabrication of hierarchically organized living constructs. The building blocks are often hydrogel-based bioinks, which need to be printed into structures with high shape fidelity to the intended computer-aided design. For optimal cell performance, relatively soft and printable inks are preferred, although these undergo significant deformation during the printing process, which may impair shape fidelity. While the concept of good or poor printability seems rather intuitive, its quantitative definition lacks consensus and depends on multiple rheological and chemical parameters of the ink. This review discusses qualitative and quantitative methodologies to evaluate printability of bioinks for extrusion- and lithography-based bioprinting. The physicochemical parameters influencing shape fidelity are discussed, together with their importance in establishing new models, predictive tools and printing methods that are deemed instrumental for the design of next-generation bioinks, and for reproducible comparison of their structural performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures














Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“To this end, considerable efforts were made in developing hydrogel-based inks or printing techniques to enhance 3D stability and shape fidelity, such as printing multimaterial inks with combined nozzle system24, 25, photo-crosslinkable hydrogels17, 26, 27, adding viscosifiers28–30, or printing in sacrificial supporting materials31–33.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [30]
The cited source says what the claim attributes to it.
In the citing paper
“However, the successful fabrication of stable 3D constructs relies on hydrogels with optimized rheological behavior, structural stability, and physicochemical properties that ensure printability and shape fidelity [7,8,9].”
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Self-citationHinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
3D bioprinting of collagen to rebuild components of the human heart
Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W. (2019) · Science · doi:10.1126/science.aav9051 · Cited by 1,782
Fibrinogen and fibrin structure and functions
MOSESSON, M. W. (2005) · Journal of Thrombosis and Haemostasis · doi:10.1111/j.1538-7836.2005.01365.x · Cited by 1,695
Bioinks for 3D bioprinting: an overview
Gungor-Ozkerim, P. S., Inci, I., Zhang, Y. S., Khademhosseini, A., & Dokmeci, M. R. (2018) · Biomaterials Science · doi:10.1039/c7bm00765e · Cited by 1,428
Multivascular networks and functional intravascular topologies within biocompatible hydrogels
Grigoryan, B., Paulsen, S. J., Corbett, D. C., Sazer, D. W., Fortin, C. L., Zaita, A. J., Greenfield, P. T., Calafat, N. J., Gounley, J. P., Ta, A. H., et al. (2019) · Science · doi:10.1126/science.aav9750 · Cited by 1,396
A review on 3D micro-additive manufacturing technologies
Vaezi, M., Seitz, H., & Yang, S. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4605-2 · Cited by 1,293
Injectable hydrogels for cartilage and bone tissue engineering
Liu, M., Zeng, X., Ma, C., Yi, H., Ali, Z., Mou, X., Li, S., Deng, Y., & He, N. (2017) · Bone Research · doi:10.1038/boneres.2017.14 · Cited by 1,211
The bioink: A comprehensive review on bioprintable materials
Hospodiuk, M., Dey, M., Sosnoski, D., & Ozbolat, I. T. (2017) · Biotechnology Advances · doi:10.1016/j.biotechadv.2016.12.006 · Cited by 1,118
Bioink properties before, during and after 3D bioprinting
Hölzl, K., Lin, S., Tytgat, L., Van Vlierberghe, S., Gu, L., & Ovsianikov, A. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/032002 · Cited by 1,070
Ouyang, L., Yao, R., Zhao, Y., & Sun, W. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035020 · Cited by 1,045
Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels
Highley, C. B., Rodell, C. B., & Burdick, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201501234 · Cited by 1,043
3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances
Derakhshanfar, S., Mbeleck, R., Xu, K., Zhang, X., Zhong, W., & Xing, M. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.11.008 · Cited by 1,027
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015
Precisely printable and biocompatible silk fibroin bioink for digital light processing 3D printing
Kim, S. H., Yeon, Y. K., Lee, J. M., Chao, J. R., Lee, Y. J., Seo, Y. B., Sultan, M. T., Lee, O. J., Lee, J. S., Yoon, S.-I., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-03759-y · Cited by 972
Paxton, N., Smolan, W., Böck, T., Melchels, F., Groll, J., & Jungst, T. (2017) · Biofabrication · doi:10.1088/1758-5090/aa8dd8 · Cited by 950
Biomanufacturing of organ-specific tissues with high cellular density and embedded vascular channels
Skylar-Scott, M. A., Uzel, S. G. M., Nam, L. L., Ahrens, J. H., Truby, R. L., Damaraju, S., & Lewis, J. A. (2019) · Science Advances · doi:10.1126/sciadv.aaw2459 · Cited by 943
Advances in crosslinking strategies of biomedical hydrogels
Hu, W., Wang, Z., Xiao, Y., Zhang, S., & Wang, J. (2019) · Biomaterials Science · doi:10.1039/c8bm01246f · Cited by 896
Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink
Colosi, C., Shin, S. R., Manoharan, V., Massa, S., Costantini, M., Barbetta, A., Dokmeci, M. R., Dentini, M., & Khademhosseini, A. (2016) · Advanced Materials · doi:10.1002/adma.201503310 · Cited by 863
Blaeser, A., Duarte Campos, D. F., Puster, U., Richtering, W., Stevens, M. M., & Fischer, H. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500677 · Cited by 808
A definition of bioinks and their distinction from biomaterial inks
Groll, J., Burdick, J. A., Cho, D.-W., Derby, B., Gelinsky, M., Heilshorn, S. C., Jüngst, T., Malda, J., Mironov, V. A., Nakayama, K., et al. (2018) · Biofabrication · doi:10.1088/1758-5090/aaec52 · Cited by 797
Self-citationSchuurman, W., Levett, P. A., Pot, M. W., van Weeren, P. R., Dhert, W. J. A., Hutmacher, D. W., Melchels, F. P. W., Klein, T. J., & Malda, J. (2013) · Macromolecular Bioscience · doi:10.1002/mabi.201200471 · Cited by 790
Self-citationSmart polymers: Physical forms and bioengineering applications
Kumar, A., Srivastava, A., Galaev, I. Y., & Mattiasson, B. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.003 · Cited by 742
Biofabrication: reappraising the definition of an evolving field
Groll, J., Boland, T., Blunk, T., Burdick, J. A., Cho, D.-W., Dalton, P. D., Derby, B., Forgacs, G., Li, Q., Mironov, V. A., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/013001 · Cited by 731
Self-citationReinforcement of hydrogels using three-dimensionally printed microfibres
Visser, J., Melchels, F. P. W., Jeon, J. E., van Bussel, E. M., Kimpton, L. S., Byrne, H. M., Dhert, W. J. A., Dalton, P. D., Hutmacher, D. W., & Malda, J. (2015) · Nature Communications · doi:10.1038/ncomms7933 · Cited by 718
Self-citationStrategies and Molecular Design Criteria for 3D Printable Hydrogels
Jungst, T., Smolan, W., Schacht, K., Scheibel, T., & Groll, J. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00303 · Cited by 712
Advanced Bioinks for 3D Printing: A Materials Science Perspective
Chimene, D., Lennox, K. K., Kaunas, R. R., & Gaharwar, A. K. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1638-y · Cited by 679
Gauvin, R., Chen, Y.-C., Lee, J. W., Soman, P., Zorlutuna, P., Nichol, J. W., Bae, H., Chen, S., & Khademhosseini, A. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.01.048 · Cited by 641
Biofabrication: A Guide to Technology and Terminology
Moroni, L., Boland, T., Burdick, J. A., De Maria, C., Derby, B., Forgacs, G., Groll, J., Li, Q., Malda, J., Mironov, V. A., et al. (2018) · Trends in Biotechnology · doi:10.1016/j.tibtech.2017.10.015 · Cited by 636
Self-citationWang, Z., Abdulla, R., Parker, B., Samanipour, R., Ghosh, S., & Kim, K. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045009 · Cited by 633
Coaxial nozzle-assisted 3D bioprinting with built-in microchannels for nutrients delivery
Gao, Q., He, Y., Fu, J.-Z., Liu, A., & Ma, L. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.05.031 · Cited by 630
The Structure and Biological Features of Fibrinogen and Fibrin
MOSESSON, M. W., SIEBENLIST, K. R., & MEH, D. A. (2001) · Annals of the New York Academy of Sciences · doi:10.1111/j.1749-6632.2001.tb03491.x · Cited by 627
Enzyme-catalyzed crosslinkable hydrogels: Emerging strategies for tissue engineering
Moreira Teixeira, L. S., Feijen, J., van Blitterswijk, C. A., Dijkstra, P. J., & Karperien, M. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2011.10.067 · Cited by 615
Bio-ink properties and printability for extrusion printing living cells
Chung, J. H. Y., Naficy, S., Yue, Z., Kapsa, R., Quigley, A., Moulton, S. E., & Wallace, G. G. (2013) · Biomaterials Science · doi:10.1039/c3bm00012e · Cited by 610
3D Printing of Shear-Thinning Hyaluronic Acid Hydrogels with Secondary Cross-Linking
Ouyang, L., Highley, C. B., Rodell, C. B., Sun, W., & Burdick, J. A. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00158 · Cited by 607
Volumetric Bioprinting of Complex Living‐Tissue Constructs within Seconds
Bernal, P. N., Delrot, P., Loterie, D., Li, Y., Malda, J., Moser, C., & Levato, R. (2019) · Advanced Materials · doi:10.1002/adma.201904209 · Cited by 604
Self-citationHydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies
Chimene, D., Kaunas, R., & Gaharwar, A. K. (2020) · Advanced Materials · doi:10.1002/adma.201902026 · Cited by 600
A Multimaterial Bioink Method for 3D Printing Tunable, Cell‐Compatible Hydrogels
Rutz, A. L., Hyland, K. E., Jakus, A. E., Burghardt, W. R., & Shah, R. N. (2015) · Advanced Materials · doi:10.1002/adma.201405076 · Cited by 572
Self-assembled hydrogels utilizing polymer–nanoparticle interactions
Appel, E. A., Tibbitt, M. W., Webber, M. J., Mattix, B. A., Veiseh, O., & Langer, R. (2015) · Nature Communications · doi:10.1038/ncomms7295 · Cited by 570
Shear-thinning and self-healing hydrogels as injectable therapeutics and for 3D-printing
Loebel, C., Rodell, C. B., Chen, M. H., & Burdick, J. A. (2017) · Nature Protocols · doi:10.1038/nprot.2017.053 · Cited by 565
Patterson, J., & Hubbell, J. A. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.06.061 · Cited by 532
Ouyang, L., Highley, C. B., Sun, W., & Burdick, J. A. (2017) · Advanced Materials · doi:10.1002/adma.201604983 · Cited by 524
Gao, T., Gillispie, G. J., Copus, J. S., PR, A. K., Seol, Y.-J., Atala, A., Yoo, J. J., & Lee, S. J. (2018) · Biofabrication · doi:10.1088/1758-5090/aacdc7 · Cited by 510
‘Printability' of Candidate Biomaterials for Extrusion Based 3D Printing: State‐of‐the‐Art
Kyle, S., Jessop, Z. M., Al‐Sabah, A., & Whitaker, I. S. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700264 · Cited by 495
4D Biofabrication Using Shape‐Morphing Hydrogels
Kirillova, A., Maxson, R., Stoychev, G., Gomillion, C. T., & Ionov, L. (2017) · Advanced Materials · doi:10.1002/adma.201703443 · Cited by 494
Recent Advances in Bioink Design for 3D Bioprinting of Tissues and Organs
Ji, S., & Guvendiren, M. (2017) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2017.00023 · Cited by 490
From Shape to Function: The Next Step in Bioprinting
Levato, R., Jungst, T., Scheuring, R. G., Blunk, T., Groll, J., & Malda, J. (2020) · Advanced Materials · doi:10.1002/adma.201906423 · Cited by 476
Self-citationMondschein, R. J., Kanitkar, A., Williams, C. B., Verbridge, S. S., & Long, T. E. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.06.005 · Cited by 475
Skardal, A., Zhang, J., & Prestwich, G. D. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.045 · Cited by 461
Jammed Microgel Inks for 3D Printing Applications
Highley, C. B., Song, K. H., Daly, A. C., & Burdick, J. A. (2019) · Advanced Science · doi:10.1002/advs.201801076 · Cited by 456
Davidenko, N., Schuster, C. F., Bax, D. V., Farndale, R. W., Hamaia, S., Best, S. M., & Cameron, R. E. (2016) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-016-5763-9 · Cited by 454
Assessing bioink shape fidelity to aid material development in 3D bioprinting
Ribeiro, A., Blokzijl, M. M., Levato, R., Visser, C. W., Castilho, M., Hennink, W. E., Vermonden, T., & Malda, J. (2017) · Biofabrication · doi:10.1088/1758-5090/aa90e2 · Cited by 448
Self-citationThree-dimensionally printed biological machines powered by skeletal muscle
Cvetkovic, C., Raman, R., Chan, V., Williams, B. J., Tolish, M., Bajaj, P., Sakar, M. S., Asada, H. H., Saif, M. T. A., & Bashir, R. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1401577111 · Cited by 443
A poly(d,l-lactide) resin for the preparation of tissue engineering scaffolds by stereolithography
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.03.055 · Cited by 437
A comparison of different bioinks for 3D bioprinting of fibrocartilage and hyaline cartilage
Daly, A. C., Critchley, S. E., Rencsok, E. M., & Kelly, D. J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/4/045002 · Cited by 436
Current advances and future perspectives of 3D printing natural-derived biopolymers
Liu, J., Sun, L., Xu, W., Wang, Q., Yu, S., & Sun, J. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.11.077 · Cited by 428
Assessment methodologies for extrusion-based bioink printability
Gillispie, G., Prim, P., Copus, J., Fisher, J., Mikos, A. G., Yoo, J. J., Atala, A., & Lee, S. J. (2020) · Biofabrication · doi:10.1088/1758-5090/ab6f0d · Cited by 426
Sun, W., Starly, B., Daly, A. C., Burdick, J. A., Groll, J., Skeldon, G., Shu, W., Sakai, Y., Shinohara, M., Nishikawa, M., et al. (2020) · Biofabrication · doi:10.1088/1758-5090/ab5158 · Cited by 426
Rodell, C. B., Kaminski, A. L., & Burdick, J. A. (2013) · Biomacromolecules · doi:10.1021/bm401280z · Cited by 425
3D and 4D Printing of Polymers for Tissue Engineering Applications
Tamay, D. G., Dursun Usal, T., Alagoz, A. S., Yucel, D., Hasirci, N., & Hasirci, V. (2019) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2019.00164 · Cited by 417
Fundamentals and Applications of Photo-Cross-Linking in Bioprinting
Lim, K. S., Galarraga, J. H., Cui, X., Lindberg, G. C. J., Burdick, J. A., & Woodfield, T. B. F. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00812 · Cited by 416
Calcium phosphate cements for bone engineering and their biological properties
Xu, H. H., Wang, P., Wang, L., Bao, C., Chen, Q., Weir, M. D., Chow, L. C., Zhao, L., Zhou, X., & Reynolds, M. A. (2017) · Bone Research · doi:10.1038/boneres.2017.56 · Cited by 409
Vat polymerization-based bioprinting—process, materials, applications and regulatory challenges
Ng, W. L., Lee, J. M., Zhou, M., Chen, Y.-W., Lee, K.-X. A., Yeong, W. Y., & Shen, Y.-F. (2020) · Biofabrication · doi:10.1088/1758-5090/ab6034 · Cited by 402
Mechanical behaviour of alginate-gelatin hydrogels for 3D bioprinting
Giuseppe, M. D., Law, N., Webb, B., A. Macrae, R., Liew, L. J., Sercombe, T. B., Dilley, R. J., & Doyle, B. J. (2018) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.12.018 · Cited by 394
Three-dimensional bioprinting of complex cell laden alginate hydrogel structures
Tabriz, A. G., Hermida, M. A., Leslie, N. R., & Shu, W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045012 · Cited by 393
Alginate Sulfate–Nanocellulose Bioinks for Cartilage Bioprinting Applications
Müller, M., Öztürk, E., Arlov, Ø., Gatenholm, P., & Zenobi-Wong, M. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1704-5 · Cited by 389
Bio-printing of collagen and VEGF-releasing fibrin gel scaffolds for neural stem cell culture
Lee, Y.-B., Polio, S., Lee, W., Dai, G., Menon, L., Carroll, R. S., & Yoo, S.-S. (2010) · Experimental Neurology · doi:10.1016/j.expneurol.2010.02.014 · Cited by 388
Advances in Extrusion 3D Bioprinting: A Focus on Multicomponent Hydrogel‐Based Bioinks
Cui, X., Li, J., Hartanto, Y., Durham, M., Tang, J., Zhang, H., Hooper, G., Lim, K., & Woodfield, T. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901648 · Cited by 383
Lin, H., Zhang, D., Alexander, P. G., Yang, G., Tan, J., Cheng, A. W.-M., & Tuan, R. S. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2012.09.048 · Cited by 382
A New 3D Printing Strategy by Harnessing Deformation, Instability, and Fracture of Viscoelastic Inks
Yuk, H., & Zhao, X. (2018) · Advanced Materials · doi:10.1002/adma.201704028 · Cited by 381
Nguyen, D. G., Funk, J., Robbins, J. B., Crogan-Grundy, C., Presnell, S. C., Singer, T., & Roth, A. B. (2016) · PLOS ONE · doi:10.1371/journal.pone.0158674 · Cited by 379
Nanostructured Pluronic hydrogels as bioinks for 3D bioprinting
Müller, M., Becher, J., Schnabelrauch, M., & Zenobi-Wong, M. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/035006 · Cited by 371
Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting
Wilson, S. A., Cross, L. M., Peak, C. W., & Gaharwar, A. K. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b13602 · Cited by 369
Four-dimensional bioprinting: Current developments and applications in bone tissue engineering
Wan, Z., Zhang, P., Liu, Y., Lv, L., & Zhou, Y. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.10.038 · Cited by 368
Tallawi, M., Rosellini, E., Barbani, N., Cascone, M. G., Rai, R., Saint-Pierre, G., & Boccaccini, A. R. (2015) · Journal of The Royal Society Interface · doi:10.1098/rsif.2015.0254 · Cited by 366
New Visible-Light Photoinitiating System for Improved Print Fidelity in Gelatin-Based Bioinks
Lim, K. S., Schon, B. S., Mekhileri, N. V., Brown, G. C. J., Chia, C. M., Prabakar, S., Hooper, G. J., & Woodfield, T. B. F. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00149 · Cited by 362
Mouser, V. H. M., Melchels, F. P. W., Visser, J., Dhert, W. J. A., Gawlitta, D., & Malda, J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035003 · Cited by 359
Self-citationWüst, S., Godla, M. E., Müller, R., & Hofmann, S. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.016 · Cited by 357
Antich, C., de Vicente, J., Jiménez, G., Chocarro, C., Carrillo, E., Montañez, E., Gálvez-Martín, P., & Marchal, J. A. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.01.046 · Cited by 353
Rodell, C. B., MacArthur, J. W., Dorsey, S. M., Wade, R. J., Wang, L. L., Woo, Y. J., & Burdick, J. A. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201403550 · Cited by 335
3D Bioprinting for Cartilage and Osteochondral Tissue Engineering
Daly, A. C., Freeman, F. E., Gonzalez‐Fernandez, T., Critchley, S. E., Nulty, J., & Kelly, D. J. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700298 · Cited by 334
Thiol–Ene Clickable Gelatin: A Platform Bioink for Multiple 3D Biofabrication Technologies
Bertlein, S., Brown, G., Lim, K. S., Jungst, T., Boeck, T., Blunk, T., Tessmar, J., Hooper, G. J., Woodfield, T. B. F., & Groll, J. (2017) · Advanced Materials · doi:10.1002/adma.201703404 · Cited by 331
3D Printability of Alginate-Carboxymethyl Cellulose Hydrogel
Habib, A., Sathish, V., Mallik, S., & Khoda, B. (2018) · Materials · doi:10.3390/ma11030454 · Cited by 330
Levato, R., Webb, W. R., Otto, I. A., Mensinga, A., Zhang, Y., van Rijen, M., van Weeren, R., Khan, I. M., & Malda, J. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.08.005 · Cited by 326
Self-citationTwo-photon excitation microscopy for the study of living cells and tissues
Benninger, R. K. P., & Piston, D. W. (2013) · Current Protocols in Cell Biology · doi:10.1002/0471143030.cb0411s59 · Cited by 311
3D Bioprinting a Cell-Laden Bone Matrix for Breast Cancer Metastasis Study
Zhou, X., Zhu, W., Nowicki, M., Miao, S., Cui, H., Holmes, B., Glazer, R. I., & Zhang, L. G. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10673 · Cited by 307
Digitally Tunable Microfluidic Bioprinting of Multilayered Cannular Tissues
Pi, Q., Maharjan, S., Yan, X., Liu, X., Singh, B., van Genderen, A. M., Robledo‐Padilla, F., Parra‐Saldivar, R., Hu, N., Jia, W., et al. (2018) · Advanced Materials · doi:10.1002/adma.201706913 · Cited by 305
Bio-resin for high resolution lithography-based biofabrication of complex cell-laden constructs
Lim, K. S., Levato, R., Costa, P. F., Castilho, M. D., Alcala-Orozco, C. R., van Dorenmalen, K. M. A., Melchels, F. P. W., Gawlitta, D., Hooper, G. J., Malda, J., et al. (2018) · Biofabrication · doi:10.1088/1758-5090/aac00c · Cited by 296
Self-citationKesti, M., Müller, M., Becher, J., Schnabelrauch, M., D’Este, M., Eglin, D., & Zenobi-Wong, M. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.033 · Cited by 294
Self-citationWang, L. L., Highley, C. B., Yeh, Y., Galarraga, J. H., Uman, S., & Burdick, J. A. (2018) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36323 · Cited by 286
3D Printing in Suspension Baths: Keeping the Promises of Bioprinting Afloat
McCormack, A., Highley, C. B., Leslie, N. R., & Melchels, F. P. W. (2020) · Trends in Biotechnology · doi:10.1016/j.tibtech.2019.12.020 · Cited by 284
3D printed hierarchical honeycombs with shape integrity under large compressive deformations
Chen, Y., Li, T., Jia, Z., Scarpa, F., Yao, C.-W., & Wang, L. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.10.028 · Cited by 284
Dynamics of Cellulose Nanocrystal Alignment during 3D Printing
Hausmann, M. K., Rühs, P. A., Siqueira, G., Läuger, J., Libanori, R., Zimmermann, T., & Studart, A. R. (2018) · ACS Nano · doi:10.1021/acsnano.8b02366 · Cited by 282
Nanoengineered injectable hydrogels for wound healing application
Lokhande, G., Carrow, J. K., Thakur, T., Xavier, J. R., Parani, M., Bayless, K. J., & Gaharwar, A. K. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.01.045 · Cited by 281
Liu, W., Zhong, Z., Hu, N., Zhou, Y., Maggio, L., Miri, A. K., Fragasso, A., Jin, X., Khademhosseini, A., & Zhang, Y. S. (2018) · Biofabrication · doi:10.1088/1758-5090/aa9d44 · Cited by 280
Palaganas, N. B., Mangadlao, J. D., de Leon, A. C. C., Palaganas, J. O., Pangilinan, K. D., Lee, Y. J., & Advincula, R. C. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b09223 · Cited by 279
Multiscale bioprinting of vascularized models
Miri, A. K., Khalilpour, A., Cecen, B., Maharjan, S., Shin, S. R., & Khademhosseini, A. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2018.08.006 · Cited by 267
Clickable PEG hydrogel microspheres as building blocks for 3D bioprinting
Xin, S., Chimene, D., Garza, J. E., Gaharwar, A. K., & Alge, D. L. (2019) · Biomaterials Science · doi:10.1039/c8bm01286e · Cited by 263
Xu, W., Molino, B. Z., Cheng, F., Molino, P. J., Yue, Z., Su, D., Wang, X., Willför, S., Xu, C., & Wallace, G. G. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b21268 · Cited by 263
The deformation behavior and mechanical properties of chondrocytes in articular cartilage
Guilak, F., Jones, W. R., Ting-Beall, H. P., & Lee, G. M. (1999) · Osteoarthritis and Cartilage · doi:10.1053/joca.1998.0162 · Cited by 258
Review of 3D printable hydrogels and constructs
Li, H., Tan, C., & Li, L. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.08.023 · Cited by 251
Diamantides, N., Wang, L., Pruiksma, T., Siemiatkoski, J., Dugopolski, C., Shortkroff, S., Kennedy, S., & Bonassar, L. J. (2017) · Biofabrication · doi:10.1088/1758-5090/aa780f · Cited by 250
Nanoengineered Ionic–Covalent Entanglement (NICE) Bioinks for 3D Bioprinting
Chimene, D., Peak, C. W., Gentry, J. L., Carrow, J. K., Cross, L. M., Mondragon, E., Cardoso, G. B., Kaunas, R., & Gaharwar, A. K. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b19808 · Cited by 248
Bittner, S. M., Smith, B. T., Diaz-Gomez, L., Hudgins, C. D., Melchiorri, A. J., Scott, D. W., Fisher, J. P., & Mikos, A. G. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.03.041 · Cited by 245
Extrusion bioprinting of soft materials: An emerging technique for biological model fabrication
Jiang, T., Munguia-Lopez, J. G., Flores-Torres, S., Kort-Mascort, J., & Kinsella, J. M. (2019) · Applied Physics Reviews · doi:10.1063/1.5059393 · Cited by 243
3D printing of complex GelMA-based scaffolds with nanoclay
Gao, Q., Niu, X., Shao, L., Zhou, L., Lin, Z., Sun, A., Fu, J., Chen, Z., Hu, J., Liu, Y., et al. (2019) · Biofabrication · doi:10.1088/1758-5090/ab0cf6 · Cited by 242
3D Bioprinting of Self‐Standing Silk‐Based Bioink
Zheng, Z., Wu, J., Liu, M., Wang, H., Li, C., Rodriguez, M. J., Li, G., Wang, X., & Kaplan, D. L. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201701026 · Cited by 241
Polymers: Chemistry and Physics of Modern Materials, Third Edition
Cowie, J. M. G., & Arrighi, V. (2007) · CRC Press eBooks · doi:10.1201/9781420009873 · Cited by 238
Schütz, K., Placht, A.-M., Paul, B., Brüggemeier, S., Gelinsky, M., & Lode, A. (2017) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2058 · Cited by 236
The integrin–collagen connection – a glue for tissue repair?
Zeltz, C., & Gullberg, D. (2016) · Journal of Cell Science · doi:10.1242/jcs.180992 · Cited by 233
Complexation-induced resolution enhancement of 3D-printed hydrogel constructs
Gong, J., Schuurmans, C. C. L., Genderen, A. M. V., Cao, X., Li, W., Cheng, F., He, J. J., López, A., Huerta, V., Manríquez, J., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-14997-4 · Cited by 233
Recent Trends in Decellularized Extracellular Matrix Bioinks for 3D Printing: An Updated Review
Dzobo, K., Motaung, K. S. C. M., & Adesida, A. (2019) · International Journal of Molecular Sciences · doi:10.3390/ijms20184628 · Cited by 231
Duarte Campos, D. F., Blaeser, A., Korsten, A., Neuss, S., Jäkel, J., Vogt, M., & Fischer, H. (2015) · Tissue Engineering Part A · doi:10.1089/ten.tea.2014.0231 · Cited by 229
Nyberg, E., Rindone, A., Dorafshar, A., & Grayson, W. L. (2017) · Tissue Engineering Part A · doi:10.1089/ten.tea.2016.0418 · Cited by 229
Gu, Q., Tomaskovic‐Crook, E., Wallace, G. G., & Crook, J. M. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700175 · Cited by 228
Dynamic Bioinks to Advance Bioprinting
Morgan, F. L. C., Moroni, L., & Baker, M. B. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901798 · Cited by 223
Development and characterisation of a new bioink for additive tissue manufacturing
Melchels, F. P. W., Dhert, W. J. A., Hutmacher, D. W., & Malda, J. (2014) · Journal of Materials Chemistry B · doi:10.1039/c3tb21280g · Cited by 222
Self-citationJeon, O., Lee, Y. B., Jeong, H., Lee, S. J., Wells, D., & Alsberg, E. (2019) · Materials Horizons · doi:10.1039/c9mh00375d · Cited by 221
Wang, K., Nune, K. C., & Misra, R. D. K. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.03.016 · Cited by 220
Handheld co-axial bioprinting: application to in situ surgical cartilage repair
Duchi, S., Onofrillo, C., O’Connell, C. D., Blanchard, R., Augustine, C., Quigley, A. F., Kapsa, R. M. I., Pivonka, P., Wallace, G., Di Bella, C., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-05699-x · Cited by 219
Chemical insights into bioinks for 3D printing
Valot, L., Martinez, J., Mehdi, A., & Subra, G. (2019) · Chemical Society Reviews · doi:10.1039/c7cs00718c · Cited by 218
Noh, I., Kim, N., Tran, H. N., Lee, J., & Lee, C. (2019) · Biomaterials Research · doi:10.1186/s40824-018-0152-8 · Cited by 214
Visible light photoinitiation of mesenchymal stem cell-laden bioresponsive hydrogels
Oregon Health & Science University, D. O. O. &. R., Bahney, C., Lujan, T., Hsu, C., Bottlang, M., West, J., & Johnstone, B. (2011) · European Cells and Materials · doi:10.22203/ecm.v022a04 · Cited by 213
Printability and Cell Viability in Bioprinting Alginate Dialdehyde-Gelatin Scaffolds
Soltan, N., Ning, L., Mohabatpour, F., Papagerakis, P., & Chen, X. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b00167 · Cited by 204
Evaluation of Photocrosslinked Lutrol Hydrogel for Tissue Printing Applications
Fedorovich, N. E., Swennen, I., Girones, J., Moroni, L., van Blitterswijk, C. A., Schacht, E., Alblas, J., & Dhert, W. J. A. (2009) · Biomacromolecules · doi:10.1021/bm801463q · Cited by 202
Zhai, X., Ruan, C., Ma, Y., Cheng, D., Wu, M., Liu, W., Zhao, X., Pan, H., & Lu, W. W. (2018) · Advanced Science · doi:10.1002/advs.201700550 · Cited by 199
Bioprinting 101: Design, Fabrication, and Evaluation of Cell-Laden 3D Bioprinted Scaffolds
Deo, K. A., Singh, K. A., Peak, C. W., Alge, D. L., & Gaharwar, A. K. (2020) · Tissue Engineering Part A · doi:10.1089/ten.tea.2019.0298 · Cited by 199
Hyaluronic acid as a bioink for extrusion-based 3D printing
Petta, D., D’Amora, U., Ambrosio, L., Grijpma, D. W., Eglin, D., & D’Este, M. (2020) · Biofabrication · doi:10.1088/1758-5090/ab8752 · Cited by 199
Self-citationAgarose-Based Hydrogels as Suitable Bioprinting Materials for Tissue Engineering
López-Marcial, G. R., Zeng, A. Y., Osuna, C., Dennis, J., García, J. M., & O’Connell, G. D. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00903 · Cited by 196
Athirasala, A., Tahayeri, A., Thrivikraman, G., França, C. M., Monteiro, N., Tran, V., Ferracane, J., & Bertassoni, L. E. (2018) · Biofabrication · doi:10.1088/1758-5090/aa9b4e · Cited by 189
Multi-material bio-fabrication of hydrogel cantilevers and actuators with stereolithography
Chan, V., Jeong, J. H., Bajaj, P., Collens, M., Saif, T., Kong, H., & Bashir, R. (2012) · Lab Chip · doi:10.1039/c1lc20688e · Cited by 188
Inkjet Bioprinting of 3D Silk Fibroin Cellular Constructs Using Sacrificial Alginate
Compaan, A. M., Christensen, K., & Huang, Y. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00432 · Cited by 188
Parameter optimization for 3D bioprinting of hydrogels
Webb, B., & Doyle, B. J. (2017) · Bioprinting · doi:10.1016/j.bprint.2017.09.001 · Cited by 186
3D bioprinting of structural proteins
Włodarczyk-Biegun, M. K., & del Campo, A. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.04.019 · Cited by 185
Lee, J., Oh, S. J., An, S. H., Kim, W.-D., & Kim, S.-H. (2020) · Biofabrication · doi:10.1088/1758-5090/ab8707 · Cited by 184
Suntornnond, R., Tan, E. Y. S., An, J., & Chua, C. K. (2017) · Scientific Reports · doi:10.1038/s41598-017-17198-0 · Cited by 183
Laser Photofabrication of Cell-Containing Hydrogel Constructs
Ovsianikov, A., Mühleder, S., Torgersen, J., Li, Z., Qin, X.-H., Van Vlierberghe, S., Dubruel, P., Holnthoner, W., Redl, H., Liska, R., et al. (2014) · Langmuir · doi:10.1021/la402346z · Cited by 182
Nanoengineered Colloidal Inks for 3D Bioprinting
Peak, C. W., Stein, J., Gold, K. A., & Gaharwar, A. K. (2018) · Langmuir · doi:10.1021/acs.langmuir.7b02540 · Cited by 178
Void‐Free 3D Bioprinting for In Situ Endothelialization and Microfluidic Perfusion
Ouyang, L., Armstrong, J. P. K., Chen, Q., Lin, Y., & Stevens, M. M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201908349 · Cited by 175
Concise Review: Bioprinting of Stem Cells for Transplantable Tissue Fabrication
Leberfinger, A. N., Ravnic, D. J., Dhawan, A., & Ozbolat, I. T. (2017) · Stem Cells Translational Medicine · doi:10.1002/sctm.17-0148 · Cited by 175
Kim, M. H., Lee, Y. W., Jung, W.-K., Oh, J., & Nam, S. Y. (2019) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2019.06.014 · Cited by 175
Lewis, P. L., Green, R. M., & Shah, R. N. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.12.042 · Cited by 167
Naghieh, S., Sarker, M. D., Sharma, N. K., Barhoumi, Z., & Chen, D. (2019) · Applied Sciences · doi:10.3390/app10010292 · Cited by 167
Emmermacher, J., Spura, D., Cziommer, J., Kilian, D., Wollborn, T., Fritsching, U., Steingroewer, J., Walther, T., Gelinsky, M., & Lode, A. (2020) · Biofabrication · doi:10.1088/1758-5090/ab7553 · Cited by 167
Kiyotake, E. A., Douglas, A. W., Thomas, E. E., Nimmo, S. L., & Detamore, M. S. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.01.041 · Cited by 166
Ahn, G., Min, K.-H., Kim, C., Lee, J.-S., Kang, D., Won, J.-Y., Cho, D.-W., Kim, J.-Y., Jin, S., Yun, W.-S., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-09201-5 · Cited by 165
Exploiting Advanced Hydrogel Technologies to Address Key Challenges in Regenerative Medicine
Foyt, D. A., Norman, M. D. A., Yu, T. T. L., & Gentleman, E. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201700939 · Cited by 164
Bioprinting of Multiscaled Hepatic Lobules within a Highly Vascularized Construct
Kang, D., Hong, G., An, S., Jang, I., Yun, W., Shim, J., & Jin, S. (2020) · Small · doi:10.1002/smll.201905505 · Cited by 164
Chondroinductive Alginate-Based Hydrogels Having Graphene Oxide for 3D Printed Scaffold Fabrication
Olate-Moya, F., Arens, L., Wilhelm, M., Mateos-Timoneda, M. A., Engel, E., & Palza, H. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b22062 · Cited by 164
3D bioprinting via an in situ crosslinking technique towards engineering cartilage tissue
Galarraga, J. H., Kwon, M. Y., & Burdick, J. A. (2019) · Scientific Reports · doi:10.1038/s41598-019-56117-3 · Cited by 163
Kim, M. K., Jeong, W., Lee, S. M., Kim, J. B., Jin, S., & Kang, H.-W. (2020) · Biofabrication · doi:10.1088/1758-5090/ab5d80 · Cited by 161
Horseradish peroxidase-catalyzed hydrogelation for biomedical applications
Khanmohammadi, M., Dastjerdi, M. B., Ai, A., Ahmadi, A., Godarzi, A., Rahimi, A., & Ai, J. (2018) · Biomaterials Science · doi:10.1039/c8bm00056e · Cited by 161
Recent Advances in 4D Bioprinting
Yang, Q., Gao, B., & Xu, F. (2020) · Biotechnology Journal · doi:10.1002/biot.201900086 · Cited by 161
Jessop, Z. M., Al‐Sabah, A., Gao, N., Kyle, S., Thomas, B. R., Badiei, N., Hawkins, K. M., & Whitaker, I. S. (2019) · Biofabrication · doi:10.1088/1758-5090/ab0631 · Cited by 159
High‐Resolution Projection Microstereolithography for Patterning of Neovasculature
Raman, R., Bhaduri, B., Mir, M., Shkumatov, A., Lee, M. K., Popescu, G., Kong, H., & Bashir, R. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500721 · Cited by 159
Jin, Y., Chai, W., & Huang, Y. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.05.144 · Cited by 158
3D bioprinting of a hyaluronan bioink through enzymatic-and visible light-crosslinking
Petta, D., Armiento, A. R., Grijpma, D., Alini, M., Eglin, D., & D’Este, M. (2018) · Biofabrication · doi:10.1088/1758-5090/aadf58 · Cited by 158
Self-citationViscoll collagen solution as a novel bioink for direct 3D bioprinting
Osidak, E. O., Karalkin, P. A., Osidak, M. S., Parfenov, V. A., Sivogrivov, D. E., Pereira, F. D. A. S., Gryadunova, A. A., Koudan, E. V., Khesuani, Y. D., Kasyanov, V. A., et al. (2019) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-019-6233-y · Cited by 155
Stichler, S., Bock, T. A., Paxton, N. C., Bertlein, S., Levato, R., Schill, V., Smolan, W., Malda, J., Teßmar, J., Blunk, T., et al. (2017) · Biofabrication · doi:10.1088/1758-5090/aa8cb7 · Cited by 155
Self-citationWideł, M., Krzywon, A., Gajda, K., Skonieczna, M., & Rzeszowska‐Wolny, J. (2014) · Free Radical Biology and Medicine · doi:10.1016/j.freeradbiomed.2013.12.021 · Cited by 152
Combining multi-scale 3D printing technologies to engineer reinforced hydrogel-ceramic interfaces
Diloksumpan, P., de Ruijter, M., Castilho, M. D., Gbureck, U., Vermonden, T., van Weeren, P. R., Malda, J., & Levato, R. (2020) · Biofabrication · doi:10.1088/1758-5090/ab69d9 · Cited by 147
Self-citationBioprinted chitosan-gelatin thermosensitive hydrogels using an inexpensive 3D printer
Roehm, K. D., & Madihally, S. V. (2017) · Biofabrication · doi:10.1088/1758-5090/aa96dd · Cited by 146
Yang, F., Tadepalli, V. R., & Wiley, B. J. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00094 · Cited by 145
Li, Z., Torgersen, J., ajami, A., Mühleder, S., Qin, X., Husinsky, W., Holnthoner, W., Ovsianikov, A., Stampfl, J., & Liska, R. (2013) · RSC Advances · doi:10.1039/c3ra42918k · Cited by 141
Collagen Type I as a Ligand for Receptor-Mediated Signaling
Boraschi-Diaz, I., Wang, J. P., Mort, J. S., & Komarova, S. V. (2017) · Frontiers in Physics · doi:10.3389/fphy.2017.00012 · Cited by 139
Simulations of 3D bioprinting: predicting bioprintability of nanofibrillar inks
Göhl, J., Markstedt, K., Mark, A., Håkansson, K. M. O., Gatenholm, P., & Edelvik, F. (2018) · Biofabrication · doi:10.1088/1758-5090/aac872 · Cited by 139
Thiol–Gelatin–Norbornene Bioink for Laser‐Based High‐Definition Bioprinting
Dobos, A., Hoorick, J. V., Steiger, W., Gruber, P., Marković, M., Andriotis, O. G., Rohatschek, A., Dubruel, P., Thurner, P. J., Vlierberghe, S. V., et al. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201900752 · Cited by 139
Leucht, A., Volz, A., Rogal, J., Borchers, K., & Kluger, P. J. (2020) · Scientific Reports · doi:10.1038/s41598-020-62166-w · Cited by 138
Zhang, S., Huang, D., Lin, H., Xiao, Y., & Zhang, X. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.0c00345 · Cited by 137
Fabrication of conductive gelatin methacrylate–polyaniline hydrogels
Wu, Y., Chen, Y. X., Yan, J., Quinn, D., Dong, P. X., Sawyer, S. W., & Soman, P. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.01.036 · Cited by 136
Abbadessa, A., Blokzijl, M. M., Mouser, V. H. M., Marica, P., Malda, J., Hennink, W. E., & Vermonden, T. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.04.080 · Cited by 135
Self-citationSuspended Manufacture of Biological Structures
Moxon, S. R., Cooke, M. E., Cox, S. C., Snow, M., Jeys, L. M., Jones, S. W., Smith, A. M., & Grover, L. M. (2017) · Advanced Materials · doi:10.1002/adma.201605594 · Cited by 133
High density cell seeding affects the rheology and printability of collagen bioinks
Diamantides, N., Dugopolski, C., Blahut, E., Kennedy, S. M., & Bonassar, L. J. (2019) · Biofabrication · doi:10.1088/1758-5090/ab3524 · Cited by 130
Mazaki, T., Shiozaki, Y., Yamane, K., Yoshida, A., Nakamura, M., Yoshida, Y., Zhou, D., Kitajima, T., Tanaka, M., Ito, Y., et al. (2014) · Scientific Reports · doi:10.1038/srep04457 · Cited by 126
Duan, S., Tao, Y., Lei, H., Wen, W., Liang, J., & Fang, D. (2017) · Extreme Mechanics Letters · doi:10.1016/j.eml.2017.09.016 · Cited by 123
Chen, M., Feng, Z., Guo, W., Yang, D., Gao, S., Li, Y., Shen, S. H., Yuan, Z., Huang, B., Zhang, Y., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b13611 · Cited by 120
Liu, B., Li, J., Lei, X., Cheng, P., Song, Y., Gao, Y., Hu, J., Wang, C., Zhang, S., Li, D., et al. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.110905 · Cited by 119
Peptide-Based Functional Biomaterials for Soft-Tissue Repair
Hosoyama, K., Lazurko, C., Muñoz, M., McTiernan, C. D., & Alarcon, E. I. (2019) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2019.00205 · Cited by 118
Optimization of Silicone 3D Printing with Hierarchical Machine Learning
Menon, A. K., Póczos, B., Feinberg, A. W., & Washburn, N. R. (2019) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2018.0088 · Cited by 117
Meng, Y., Cao, J., Chen, Y., Yu, Y., & Ye, L. (2019) · Journal of Materials Chemistry B · doi:10.1039/c9tb02278c · Cited by 117
Dual-crosslinked methylcellulose hydrogels for 3D bioprinting applications
Shin, J. Y., Yeo, Y. H., Jeong, J. E., Park, S. A., & Park, W. H. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116192 · Cited by 117
Highly Reactive Thiol‐Norbornene Photo‐Click Hydrogels: Toward Improved Processability
Hoorick, J. V., Gruber, P., Marković, M., Rollot, M., Graulus, G., Vagenende, M., Tromayer, M., Erps, J. V., Hugo Thienpont, A., Martins, J. C., et al. (2018) · Macromolecular Rapid Communications · doi:10.1002/marc.201800181 · Cited by 113
Bahçecioğlu, G., Hasırcı, N., Bilgen, B., & Hasırcı, V. (2018) · Biofabrication · doi:10.1088/1758-5090/aaf707 · Cited by 113
Akkineni, A. R., Ahlfeld, T., Lode, A., & Gelinsky, M. (2016) · Biofabrication · doi:10.1088/1758-5090/8/4/045001 · Cited by 112
Properties of injectable ready-to-use calcium phosphate cement based on water-immiscible liquid
Heinemann, S. H., Rößler, S., Lemm, M., Ruhnow, M., & Nies, B. A. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.12.017 · Cited by 112
3D bioprinting for reconstructive surgery: Principles, applications and challenges
Jessop, Z. M., Al‐Sabah, A., Gardiner, M. D., Combellack, E. J., Hawkins, K. M., & Whitaker, I. S. (2017) · Journal of Plastic Reconstructive & Aesthetic Surgery · doi:10.1016/j.bjps.2017.06.001 · Cited by 112
Tissue-mimicking gelatin scaffolds by alginate sacrificial templates for adipose tissue engineering
Negrini, N. C., Bonnetier, M., Giatsidis, G., Orgill, D. P., Farè, S., & Marelli, B. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.01.018 · Cited by 112
Zhou, M., Lee, B. H., Tan, Y. J., & Tan, L. P. (2019) · Biofabrication · doi:10.1088/1758-5090/ab063f · Cited by 112
Han, J., Kim, D. S., Jang, I. H., Kim, H., & Kang, H. (2019) · Journal of Tissue Engineering · doi:10.1177/2041731419845849 · Cited by 112
Wang, X., Li, X., Dai, X., Zhang, X., Zhang, J., Xu, T., & Lan, Q. (2018) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2018.07.042 · Cited by 110
Jiang, T., Munguia-Lopez, J. G., Gu, K., Bavoux, M. M., Flores-Torres, S., Kort-Mascort, J., Grant, J., Vijayakumar, S., De Leon-Rodriguez, A., Ehrlicher, A. J., et al. (2020) · Biofabrication · doi:10.1088/1758-5090/ab3a5c · Cited by 106
Castilho, M. D., de Ruijter, M., Beirne, S., Villette, C. C., Ito, K., Wallace, G. G., & Malda, J. (2020) · Trends in biotechnology · doi:10.1016/j.tibtech.2020.04.014 · Cited by 106
Self-citationPetta, D., Grijpma, D. W., Alini, M., Eglin, D., & D’Este, M. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00416 · Cited by 105
Self-citationHydrogel-based reinforcement of 3D bioprinted constructs
Melchels, F. P. W., Blokzijl, M. M., Levato, R., Peiffer, Q. C., de Ruijter, M., Hennink, W. E., Vermonden, T., & Malda, J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035004 · Cited by 104
Self-citationGuilak, F., Alexopoulos, L. G., Haider, M. A., Ting‐Beall, H. P., & Setton, L. A. (2005) · Annals of Biomedical Engineering · doi:10.1007/s10439-005-4479-7 · Cited by 104
Schipani, R., Scheurer, S., Florentin, R., Critchley, S. E., & Kelly, D. J. (2020) · Biofabrication · doi:10.1088/1758-5090/ab8708 · Cited by 103
Research works printed but not linked: 5
- Chimene, 2020, Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies, Adv. Mater., 32, 1902026, 10.1002/adma.201902026 · DOI · Paper page
- Mezger, 2011, The Rheology Handbook
- Petta, 2018, Three-Dimensional Printing of a Tyramine Hyaluronan Derivative with Double Gelation Mechanism for Independent Tuning of Shear Thinning and Postprinting Curing, ACS Biomater. Sci. Eng., 4, 3088, 10.1021/acsbiomaterials.8b00416 · DOI
- Kiyotake, 2019, Development and Quantitative Characterization of the Precursor Rheology of Hyaluronic Acid Hydrogels for Bioprinting, Acta Biomater., 95, 176, 10.1016/j.actbio.2019.01.041 · DOI · Paper page
- 2015, ASTM52900-15, I.
Cited by
Self-Healing Injectable Hydrogels for Tissue Regeneration
Bertsch, P., Diba, M., Mooney, D. J., & Leeuwenburgh, S. C. G. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00179 · Cited by 892
“258,259 Printability is usually divided into the subcategories “extrud-ability”, “filament classification”, and “shape fidelity”.”
Rheological characterisation of ceramic inks for 3D direct ink writing: A review
del-Mazo-Barbara, L., & Ginebra, M.-P. (2021) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2021.08.031 · Cited by 444
3D-printed self-healing hydrogels via Digital Light Processing
Caprioli, M., Roppolo, I., Chiappone, A., Larush, L., Pirri, C. F., & Magdassi, S. (2021) · Nature Communications · doi:10.1038/s41467-021-22802-z · Cited by 335
Design and advanced manufacturing of electromagnetic interference shielding materials
Liu, J., Yu, M.-Y., Yu, Z.-Z., & Nicolosi, V. (2023) · Materials Today · doi:10.1016/j.mattod.2023.03.022 · Cited by 332
The rheology of direct and suspended extrusion bioprinting
Cooke, M. E., & Rosenzweig, D. H. (2021) · APL Bioengineering · doi:10.1063/5.0031475 · Cited by 284
Metadata
- Authors
- Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J.
- Affiliations
- AO Foundation (CH)
- Utrecht University (NL)
- Corresponding author
- Malda, Jos
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-08-28
- Volume
- 120
- Issue
- 19
- Pages
- 10850-10877
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- PMC
- PMC7564085
- OpenAlex
- W3082213210
- Cited by
- 1,359
- References
- 287
- Citations by year
- 2026: 305 · 2025: 283 · 2024: 280 · 2023: 202 · 2022: 176 · 2021: 107 · 2020: 6
- FWCI
- 10.29
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Chemical Reviews (publishedVersion, cc-by-nc-nd)
- PubMed Central (publishedVersion)
- PubMed (publishedVersion)
- University of Twente Research Information (publishedVersion, cc-by-nc-nd)
- HAL (submittedVersion)
- Utrecht University Repository (Utrecht University) (submittedVersion, other-oa)
- University of Twente Research Information (submittedVersion, cc-by-nc-nd)
- Funders
- AO Foundation (3D OC)
- Nederlandse Organisatie voor Wetenschappelijk Onderzoek (024.003.013)
- ReumaNederland (LLP12, LLP22)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Keywords
- bioinks, 3D bioprinting, printability, shape fidelity, hydrogels, extrusion-based bioprinting, rheology, physicochemical parameters, prediction model
- MeSH terms
- Humans, Ink, Tissue Engineering, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.