Effect of Molecular Weight on the Crystallization and Melt Memory of Poly(ε-caprolactone) (PCL)
Open accessThe DOI matches its Crossref record; 74 of the 75 references it cites were found in a registry or an index, and 1 are not checked yet.
Abstract
High Resolution Image Download MS PowerPoint Slide The role of the molecular weight in the crystallization and melt memory of poly(ε-caprolactone) (PCL) was investigated. To this end, 10 PCL samples of synthetic and commercial origin and different chain ends, covering a number-average molecular weight ( M n ) range between 0.48 and 70.5 kg/mol, were analyzed. Polarized light optical microscopy, differential scanning calorimetry, and small-angle X-ray scattering (SAXS) were employed for in-depth characterization. The thermal transitions, morphology, crystallization kinetics, structural parameters, and memory effects were evaluated as a function of M n . The melting temperature and the equilibrium melting temperature saturate at a particular M n . Instead, the crystallization temperature and the degree of crystallinity display an optimum M n at which the parameters reach a maximum, describing a bell-shaped behavior as a function of M n . Similarly, the primary nucleation rate, spherulitic growth rate, and overall crystallization rate exhibit a bell-shaped behavior as a function of M n, attributed to a competition between nucleation and diffusion. SAXS analysis, which includes the long period and lamellar thickness determination, revealed that at M n < 2.0 kg/mol, PCL crystallizes in an extended-chain conformation, while at M n ≥ 2.0 kg/mol, folded chains are already present. In line with these results, the morphological study showed that the PCL crystallizes as axialites at M n < 2.0 kg/mol and at higher M n as spherulites. The melt memory effect of PCL, studied by self-nucleation experiments, increases with M n due to the simultaneous increase of entanglements and the number of chain folding within the constituent crystalline lamellae per chain. Successive self-nucleation and annealing (SSA) experiments revealed that the PCL samples exhibit a similar SSA profile, indicating that the M n does not influence the intermolecular interactions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“It has been reported that the stereocomplex crystal formation can be controlled by the diffusion of the enantiomeric chains.75”
From Correlative characterization of stereocomplex formation in blends of aliphatic polyester P(PCL m - b -PLLA n ) multiblock-copolymers and PDLA (2026) · cites this paper as [75]
Experimental — accuracy not yet measuredThe check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“Pengju´s group 75 confirmed that after rapid solvent evaporation SC formation was exclusively achieved compared to slow solvent evaporation, which was attributed to simultaneous folding of PLLA and PDLA chains.”
From Correlative characterization of stereocomplex formation in blends of aliphatic polyester P(PCL m - b -PLLA n ) multiblock-copolymers and PDLA (2026) · cites this paper as [75]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Synthesis of polycaprolactone: A review
Labet, M., & Thielemans, W. (2009) · Chemical Society Reviews · doi:10.1039/b820162p · Cited by 1,673
Melting process and the equilibrium melting temperature of polychlorotrifluoroethylene
Hoffman, J. D., & Weeks, J. J. (1962) · Journal of Research of the National Bureau of Standards Section A: Physics and Chemistry · doi:10.6028/jres.066a.003 · Cited by 1,490
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Degradation mechanisms of polycaprolactone in the context of chemistry, geometry and environment
Bartnikowski, M., Dargaville, T. R., Ivanovski, S., & Hutmacher, D. W. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.05.004 · Cited by 769
Lorenzo, A. T., Arnal, M. L., Albuerne, J., & Müller, A. J. (2007) · Polymer Testing · doi:10.1016/j.polymertesting.2006.10.005 · Cited by 699
Self-citationFillon, B., Wittmann, J. C., Lotz, B., & Thierry, A. (1993) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.1993.090311013 · Cited by 651
Thermal fractionation of polymers
Müller, A. J., & Arnal, M. L. (2005) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2005.03.001 · Cited by 376
Self-citationMüller, A. J., Hernández, Z. H., Arnal, M. L., & Sánchez, J. J. (1997) · Polymer Bulletin · doi:10.1007/s002890050174 · Cited by 318
Self-citationStructural Studies of Polyesters. III. Crystal Structure of Poly-ε-caprolactone
Chatani, Y., Okita, Y., Tadokoro, H., & Yamashita, Y. (1970) · Polymer Journal · doi:10.1295/polymj.1.555 · Cited by 305
Research works printed but not linked: 2
- Mathot V. B. F., 1995, Calorymetry and Thermal Analysis of Polymers
- 10.1002/(sici)1521-3935(20000301)201:5 · doi:10.1002/(sici)1521-3935(20000301)201:5
Cited by
Items 101–200 of 211
Misiak, M., Latko‐Durałek, P., Fernández, M., Olmedo‐Martínez, J. L., Kołbuk, D., Górecka, Ż., Malmir, A., Kozera, P., Müller, A. J., Hatzikiriakos, S. G., et al. (2025) · International Journal of Polymer Analysis and Characterization · doi:10.1080/1023666x.2025.2501584 · Cited by 2
Self-citationMongilyov, I., Rosenthal, M., Puyvelde, P. V., & Goderis, B. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c00510 · Cited by 3
Sangroniz, L., Ramos, J., Vega, J. F., Li, X., Xu, T., Chen, E. Y. ‐., Müller, A. J., & Cavallo, D. (2025) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5c04491 · Cited by 2
Self-citationMariz, M., Fidalgo, F., & Ferreira, P. C. N. (2025) · Discover Materials · doi:10.1007/s43939-025-00401-9 · Cited by 2
Holec, P., Háková, M., Kolichová, I., Vinter, J., Kalous, T., Hujerová, M., Šatı́nský, D., & Erben, J. (2025) · Environmental Technology & Innovation · doi:10.1016/j.eti.2025.104591 · Cited by 2
Xu, Y., Yang, K., Chen, W., Wu, M., Xu, Y., Yuan, Z., Zheng, Z., Wang, C., & Chen, X. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c01641 · Cited by 2
Improving the flowability of poly (3-hydroxybutyrate-co-3-hydroxyhexanoate) by blending techniques
Tassakarn, N., Yamaguchi, M., & Sunagawa, T. (2025) · Colloid & Polymer Science · doi:10.1007/s00396-025-05547-9 · Cited by 2
Rezaie, R., Sadeghi, G. M. M., & Ghasemi, S. M. (2025) · Journal of Materials Science · doi:10.1007/s10853-025-11878-3 · Cited by 2
Mahy, J. G., Lambert, S., Lambert, A., Bernard, J., Duysens, G., Monteiro, A. P. F., Dutrieux, S., Farcy, A., Riva, R., Jérôme, C., et al. (2025) · Next Materials · doi:10.1016/j.nxmate.2025.101546 · Cited by 2
Geeraert, H., Haese, M. D., Pitet, L. M., Cavallo, D., Peeters, E., & den Brande, N. V. (2026) · Macromolecules · doi:10.1021/acs.macromol.5c02581 · Cited by 2
Self-citationCeulaer, J. D., Cardinaels, R., & Puyvelde, P. V. (2026) · Macromolecules · doi:10.1021/acs.macromol.5c02877 · Cited by 2
4D microprinting of dual-shape- and triple-shape-memory polymers
Martins, L. F., Spiegel, C. A., & Blasco, E. (2026) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2026.103137 · Cited by 4
Ren, X., Niu, L., Zhao, L., Zhao, W., Lin, Q., Guo, S., Hu, Y. C., & Li, W. (2026) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2026.113043 · Cited by 2
Natali, D., Gualandi, C., Bianchi, M., Alessandrini, A., Pandini, S., Zanoni, M., Focarete, M. L., & Toselli, M. (2026) · European Polymer Journal · doi:10.1016/j.eurpolymj.2026.114688 · Cited by 2
Haghighi, M., Taremi, F., Ghadim, Z. E., & Shafiei, E. (2026) · Scientific Reports · doi:10.1038/s41598-026-45707-7 · Cited by 3
Structural features that control hydrophobicity generation on PLA surfaces
Hernández-Rivas, M., Martínez‐Gómez, A., Tiemblo, P., & García, N. (2026) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2026.140555 · Cited by 2
Crystallization‐Driven Controlled 2D Self‐Assemblies via Aqueous RAFT Emulsion Polymerization
Li, Y., Cui, Y., Xing, M., Sun, Y., Li, Z., Liu, Y., Qu, X., & Chen, S. (2024) · Macromolecular Rapid Communications · doi:10.1002/marc.202400549 · Cited by 2
A Silibinin‐Poly(ε‐Caprolactone) Conjugate as an Enhanced Anticancer Agent
Vento, F., Privitera, A., Caruso, G., & Nicosia, A. (2025) · Macromolecular Bioscience · doi:10.1002/mabi.202400510 · Cited by 2
Enhanced recyclability of polycaprolactone via precisely defined incorporation of acetal bonds
Socka, M., & Kost, B. (2025) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2025.111635 · Cited by 2
Centeno, E., Peñas, M. I., Zhang, P., Ladelta, V., Mercado-Rico, J., Matxinandiarena, E., Zubitur, M., Múgica, A., Hadjichristidis, N., Müller, A. J., et al. (2023) · European Polymer Journal · doi:10.1016/j.eurpolymj.2023.112526 · Cited by 2
Self-citationExpandable Microspheres Transform 2D Electrospun Mats Into 3D Composite Scaffolds
Tran, H. Q., & Xie, J. (2024) · Macromolecular Rapid Communications · doi:10.1002/marc.202400882 · Cited by 1
Liu, C., Zhang, X., Shen, J., Liu, Y., & Ma, Z. (2025) · Macromolecular Rapid Communications · doi:10.1002/marc.202500194 · Cited by 1
Doğancı, M. D., Davarcı, D., Uner, M., Demir, A., Musatat, A. B., Akdoğan, M., & Doğancı, E. (2025) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2025.131363 · Cited by 1
Dinçkal, S., & Yıldız, Ü. H. (2025) · Journal of Macromolecular Science Part A · doi:10.1080/10601325.2025.2546109 · Cited by 2
Sakhavi, M., Sofla, R. L. M., Naghavi‐Ilkhichi, P., & bejandi, F. S. (2025) · Polymers for Advanced Technologies · doi:10.1002/pat.70332 · Cited by 1
Deng, L., Li, X., Wang, H., Shi, Y., & Guo, L. (2025) · Polymer · doi:10.1016/j.polymer.2025.129484 · Cited by 1
Liu, T., Lou, M., Hu, Z., Han, J., & Wang, L. (2025) · Dyes and Pigments · doi:10.1016/j.dyepig.2025.113514 · Cited by 1
Farias, T. L. S., Bastos, I. D. S., Ricardo, J. C., Cunha, J., Barcelay, Y. R., Gandarilla, A. M. D., Segala, K., Orlandi, P. P., Fernandes, R., Paula, M. M. D. S., et al. (2025) · International Journal of Biomaterials · doi:10.1155/ijbm/9230130 · Cited by 1
Molecular weight dependency of crystallization line and melting line of poly(thioglycolide)
Mou, S., Zhao, C., Cai, L., Wang, Y., Wu, S., Tao, Y., Lu, Y., & Men, Y. (2026) · Polymer · doi:10.1016/j.polymer.2026.129795 · Cited by 1
Monegro, R. H., Mountziaris, I., Tanveer, M. S., Gonzales, K. E., Das, S., Kumar, S. K., Krishnamoorti, R., & Robertson, M. L. (2026) · Macromolecules · doi:10.1021/acs.macromol.5c02612 · Cited by 3
Madsen, J., Bhattarai, B., & Daugaard, A. E. (2026) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2026.106753 · Cited by 1
Polymeric Multimaterials Enabled by Aza-Michael Addition
Zou, W., Pan, R., & Li, Q. (2026) · Macromolecules · doi:10.1021/acs.macromol.6c00867 · Cited by 1
Nguyen, T. C., Nguyen, T. D., Tran, D. T., & Thai, H. (2026) · Langmuir · doi:10.1021/acs.langmuir.6c01410 · Cited by 1
He, Z., Huang, B., Zhou, K., Luo, J., Yang, X., Wang, Z., Ji, L., Chen, Y., Chen, J., Cao, Y., et al. (2026) · Polymer Chemistry · doi:10.1039/d6py00297h · Cited by 1
Vezzini, D., Myburgh, M. W., Calzavara, A., Lorenzetti, A., Viljoen‐Bloom, M., & Favaro, L. (2026) · Bioresource Technology · doi:10.1016/j.biortech.2026.135286 · Cited by 1
Naik, S. S., Dutta, N. K., Choudhury, N. R., & Nair, K. S. (2026) · European Polymer Journal · doi:10.1016/j.eurpolymj.2026.114952 · Cited by 1
Multiblock Poly‐ε‐Caprolactones: One‐Step Synthesis toward Programmable Properties
Shen, T., Deng, K., Chen, Y., He, Y., Zhu, Y., Xu, J., & Ling, J. (2023) · Macromolecular Rapid Communications · doi:10.1002/marc.202300397 · Cited by 1
Chen, B., Li, J., Wang, M., Run, M., Wang, D., & Liu, G. (2024) · Polymer · doi:10.1016/j.polymer.2024.126675 · Cited by 1
Self-citationLiu, P., Yu, J., Guan, J., Zeng, X., & Zhang, Y. (2024) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x241286365 · Cited by 2
The Development and Toxicological Evaluation of Novel Polyurethane Materials
Zhang, M., Luo, X., Jiang, M., Wen, Y., Wang, P., Chen, P., & Sun, D. (2025) · Toxics · doi:10.3390/toxics13060512 · Cited by 1
Cucoveica, O., Bertsch, C., Triaud, R., Atanase, L. I., & Delaite, C. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4786698
The Relationship between Rheological, Thermal and Tack Properties of Copolyester Hot Melt AdhesivesPreprint
Latko‐Durałek, P., Misiak, M., Fernandez, M. M., Olmedo‐Martínez, J. L., Górecka, Ż., Malmir, A., Kozera, P., Müller, A. J., Hatzikiriakos, S. G., & Boczkowska, A. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4800200
Self-citationCucoveica, O., Bertsch, C., Triaud, R., Atanase, L. I., & Delaite, C. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4855803
Literature Review of Recycling Polypropylene and Polyamide 12 Powders for Selective Laser Sintering
Hurlbutt, K., & (NNSA), U. N. N. S. A. (2024) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.2172/2372667
Flowers, M., Mertens, N., Billups, A., Ogle, B. M., & Wang, C. (2024) · Pharmaceutics · doi:10.3390/pharmaceutics16111380
Rheology as a Tool to Investigate Anti‐Nucleation in Semicrystalline Polymers
Tov, O. S., Bacharuzi, N., Dotan, A. L., & Lewitus, D. Y. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.56873
Matxinandiarena, E., Múgica, A., Zubitur, M., Trouillet, R., Ammar, S., & Müller, A. J. (2025) · Macromolecular Chemistry and Physics · doi:10.1002/macp.202500074
Self-citationNathan, D. K., & Prabhu, K. N. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.57049
Upcycling PET and mixed plastics: controlled depolymerisation and vitrimerisation
Ng, J. K. W. (2024) · DR-NTU (Nanyang Technological University) · doi:10.32657/10356/184401
Pinheiro, F., Fernandes, A. A., Jesus, A. M. P. D., Maurício, A. C., ALVES, N., & Silva, M. E. (2025) · Journal of Mechanics in Medicine and Biology · doi:10.1142/s0219519425500174
Wang, J., Fu, Y., Yan, X., Yu, K., Qiu, Y., & Qian, K. (2025) · Journal of Cellular Plastics · doi:10.1177/0021955x251379792
Gowrisankar, S., Lang, M., Schröder, S., Mathew, N., der Günne, J. S. A., & Schreiner, P. R. (2025) · European Journal of Organic Chemistry · doi:10.1002/ejoc.202500645
Shape memory polyurethane material with programmable interface promotes osteogenesis in vitro
Zhou, X., Zou, B., Chen, Q., Yang, G., Lai, Q., & Wang, X. (2025) · Surfaces and Interfaces · doi:10.1016/j.surfin.2025.107883
Crystallization Control and Melt Memory in PHPM ‐ PCL x Copolymers Tuned by ε ‐CL Content
Luo, P., Cheng, X., Cao, G., Lv, X., Yang, Y., Wang, B., He, B., & Zheng, L. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.70017
Electron Irradiation‐Induced Properties of Polycaprolactone for Potential Medical Applications
Li, R., Ding, J., Chen, Q., & Wang, J. (2025) · ChemistrySelect · doi:10.1002/slct.202504414
Pride, M. C., Jones, D., Vashisth, P., Watkins, D. L., & Tanner, E. E. L. (2025) · ACS Omega · doi:10.1021/acsomega.5c09614
Sangroniz, L., Alegría, Á., & Müller, A. J. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c01395 · Cited by 1
Self-citationInterfacial Conformation of Polymer Chains and Its Impact on Film Properties
Martins de Lima, B. (2025) · Spectrum Research Repository (Concordia University)
Building Stronger Nanofiber Scaffolds for Regenerative Aortic Valves
Pimentel, H. C. S. (2025) · Digital Access to Scholarship at Harvard (DASH) (Harvard University)
Effect of self-nucleation on crystallization of as-received poly (lactic acid)
Yao, L. F., Ying, J., Yang, L., Geng, Q., Ding, H., & Wang, Y. (2025) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-025-15108-5
How chain stereoconfiguration and molecular weight influence Poly(propylene oxide) crystallization
Torres-Rodríguez, J., Fornaciari, C., Pérez‐Camargo, R. A., Múgica, A., Zubitur, M., Preda, G., Pasini, D., Coulembier, O., & Müller, A. J. (2025) · European Polymer Journal · doi:10.1016/j.eurpolymj.2025.114464
Self-citationXia, M., Cheng, Y., Shang, J., Chao, J., Li, Y., & Wei, Z. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.173087
Atomistic Insights into Structure and Properties of ε-Caprolactone Oligomers
Ahmed, M., Yilmaz, D., Poudel, P., Schacher, F. H., & Perlt, E. (2026) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.5c06385
Peranidze, K., Parker, M., Aghajohari, M., Vertegel, P. A., Makaev, S., Yadavalli, N. S., Minko, S., & Reukov, V. V. (2026) · Nanoscale · doi:10.1039/d5nr05509a · Cited by 1
Tian, G., Tang, W., Zhang, X., Yang, D., Zhang, X., & Zhu, G. (2026) · Macromolecules · doi:10.1021/acs.macromol.5c02475
Different Crystalline Populations for Biopolyesters within Graphene-Based Nanopapers
Zhao, H., Pérez‐Camargo, R. A., Li, Y., Li, Z., Liu, G., Müller, A. J., & Fina, A. (2026) · Macromolecules · doi:10.1021/acs.macromol.5c03526
Self-citationLu, C.-S., & Li, M. (2026) · ACS Applied Engineering Materials · doi:10.1021/acsaenm.6c00136 · Cited by 1
Stefano, F. D., Cecere, A., Angelico, M. R., Giordano, A., Scoti, M., & Rosa, C. D. (2026) · Macromolecules · doi:10.1021/acs.macromol.5c03636
Ceulaer, J. D., Cardinaels, R., & Puyvelde, P. V. (2026) · Rheologica Acta · doi:10.1007/s00397-026-01558-7
Mussoni, C., Heinze, C., Ryma, M., Jun, I., Lamberger, Z., Andelovic, K., Kade, J. C., Stahlhut, P., Lang, G., Ahmad, T., et al. (2026) · Bioactive Materials · doi:10.1016/j.bioactmat.2026.03.020 · Cited by 1
Huang, Y., Lin, T., Iyer, K. A., & Torkelson, J. M. (2026) · Journal of Applied Polymer Science · doi:10.1002/app.71642
Ramos, K. L. D., Moreno, S., Bustamante, O., & Roberson, D. A. (2025) · Journal of Innovations in Materials and Manufacturing Engineering · doi:10.53941/jimme.2026.100002 · Cited by 1
Mészáros, L., Lukáš, D., Petrény, R., HLADÍKOVÁ, A., BAADEROVÁ, K., MAROUSKOVÁ, N., Pinke, B. G., CHUDOBOVÁ, E., MIKULE, J., & Košťáková, E. K. (2025) · NANOCOM ... · doi:10.37904/nanocon.2025.5175
Sangroniz, L., Barroso‐Bujans, F., Allgaier, J., & Müller, A. J. (2026) · Polymer · doi:10.1016/j.polymer.2026.130193
Self-citationBiodegradable Materials Composed of PLA and High Load Triglycerides
Trutschel, M., Reichert, D., Raja, A., Jacobs, J., Abdel-Haq, M., Kumar, A., Mäder, K., & Domb, A. J. (2026) · Macromolecular Materials and Engineering · doi:10.1002/mame.70251
Kim, H. A., Fan, E., Chandra, A. S., Meyler, E. M., Tang, J. E., Noh, M. H., Feist, A. M., & Pokorski, J. K. (2026) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6c02276
Luo, J., Xie, R., Chen, K., Zhang, C., Lv, Z., Zhang, H., Yao, Z., Cui, C., Ming, X., Jiao, J., et al. (2026) · Macromolecular Rapid Communications · doi:10.1002/marc.70342
Ma, Q., Wang, Y., Liu, B., Wu, C., & Wang, B. (2026) · Polymer Chemistry · doi:10.1039/d6py00541a
Banerjee, A., & Majumder, M. (2026) · RSC Advances · doi:10.1039/d6ra03293a
Gonçalves, I. C., Pereira, K. A. B., Garcia, E. E., Albitres, G. A. V., & Mendes, L. C. (2026) · Materials Sciences and Applications · doi:10.4236/msa.2026.177011
Molecular Segregation and Melt Memory in Dilute Polycaprolactone with Reduced Entanglements
Shi, C., Zeng, J.-L., 王, Z.-F. 泽. W., & Men, Y.-F. (2026) · Chinese Journal of Polymer Science · doi:10.1007/s10118-026-3695-5
A deep insight into the spontaneous fragmentation of two-dimensional crystalline platelets
Zha, B., Liu, L., & Tong, Z. (2026) · Giant · doi:10.1016/j.giant.2026.100414
Gutiérrez, F., Zárate-Triviño, D. G., Cataño, F. A., Córdoba, A., Saavedra, M., Toro, E. L., Alfaro, A., Rodríguez, E., Rivera, J. C. L., Zapata, S., et al. (2026) · International Journal of Molecular Sciences · doi:10.3390/ijms27167117
Understanding the Ultrafast Crystallization Kinetics of Donor–Acceptor Semiconducting Polymers
Tent-Pérez, J., Vázquez, F. B., Olmedo‐Martínez, J. L., Veiga, A. P., Sanviti, M., Cortés, M. D. L. Á. P., Curé, A., Solla, E., Mundet, B., Aumaître, C., et al. (2026) · Journal of the American Chemical Society · doi:10.1021/jacs.6c07715
Thiyagu, T. T., Kulandhaivelu, S. V., Thiyaku, T. T., & Babu, F. R. S. (2026) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2026.109890
Kocourková, K., Jaška, D., Mrlík, M., Kadlečková, M., Mikulka, F., Čermák, R., Kubíčková, L., Joukal, M., Smolka, P., Humeník, M., et al. (2026) · Advanced Materials Interfaces · doi:10.1002/admi.70633
Yang, T., Li, R., Lin, X., & Xue, Y. (2026) · Journal of Applied Polymer Science · doi:10.1002/app.71416
Park, C., Hong, S., & Hwang, Y. (2026) · Journal of Polymer Science · doi:10.1002/pola.70324
Xiong, P., Ayyachi, T., Dargaville, B. L., Wang, S., & Hutmacher, D. W. (2026) · Macromolecules · doi:10.1021/acs.macromol.6c01128
Ren, X., Lin, Q., Zhao, W., Niu, L., Guo, S., Li, W., & Zhang, H. (2026) · Industrial Crops and Products · doi:10.1016/j.indcrop.2026.124282
Khouloud, M., Boutriouia, E. H., Benhida, R., Atif, A., Boulif, R., Ferji, K., Beniazza, R., Six, J., & Lahcini, M. (2026) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2026.125804
Inverardi, N., Pandini, S., Messori, M., Toselli, M., & Scalet, G. (2026) · Macromolecules · doi:10.1021/acs.macromol.6c00842
Babakr, K. A., Kök, M., Mohammed, K. S., Coşkun, M., & Qader, İ. N. (2026) · Polymer-Plastics Technology and Materials · doi:10.1080/25740881.2026.2733369
Rezaie, R., Sadeghi, G. M. M., & Ghasemi, S. M. (2026) · Polymer Chemistry · doi:10.1039/d6py00534a
Zhang, X., Lu, Y., & Men, Y. (2026) · Giant · doi:10.1016/j.giant.2026.100428
Biodegradable 3D‐Printable and Coatable Antifouling Composites for Marine Applications
Corigliano, G., Ravelli, L., Nardi, M., Tu, R., Bellini, E., Isa, V., Filippeschi, C., Finazzi, R., Ceseracciu, L., Paknezhad, N., et al. (2026) · Advanced Functional Materials · doi:10.1002/adfm.78601
Li, P., & Rwei, S. (2026) · International Journal of Adhesion and Adhesives · doi:10.1016/j.ijadhadh.2026.104496
Yachou, H. A., Boutriouia, E. H., Assimi, T. E., Blilid, S., Maazouz, A., Youcef, H. B., Lamnawar, K., Kadib, A. E., & Lahcini, M. (2026) · RSC Advances · doi:10.1039/d6ra07997k
Structure–Property Relationships of Eco-friendly Spincoated Poly(ε-caprolactone) (PCL) Thin Films
Modrić-Šahbazović, A., Gazdić, I., Sakic, Z., Smajlagić, A., & Đekić, M. (2026) · Journal of Environmental Nanotechnology · doi:10.13074/jent.2026.09.2632350
Unexpected Two-Step Crystallization in Polyethylene with Isolated In-Chain Functional Groups
Roopsung, N., Lu, Y., Takahashi, K., Nozaki, K., Yoshie, N., & Nakagawa, S. (2026) · Macromolecules · doi:10.1021/acs.macromol.6c01886
Metadata
- Authors
- Fernández-Tena, A., Pérez-Camargo, R. A., Coulembier, O., Sangroniz, L., Aranburu, N., Guerrica-Echevarria, G., Liu, G., Wang, D., Cavallo, D., & Müller, A. J.
- Affiliations
- POLYMAT and Department of Polymers and Advanced Materials: Physics, Chemistry and Technology, Faculty of Chemistry, University of the Basque Country UPV/EHU, Paseo Manuel de Lardizabal 3, 20018 Donostia-San Sebastián, Spain
- Beijing National Laboratory for Molecular Science, CAS Key Laboratory of Engineering Plastics, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190, China
- University of Mons (BE)
- University of the Basque Country (ES)
- Chinese Academy of Sciences (CN)
- University of Genoa (IT)
- Ikerbasque (ES)
- Corresponding author
- Müller, Alejandro J.
- ORCID
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2023-06-07
- Volume
- 56
- Issue
- 12
- Pages
- 4602-4620
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W4379618677
- Cited by
- 200
- References
- 71
- Citations by year
- 2026: 69 · 2025: 79 · 2024: 42 · 2023: 10
- FWCI
- 15.18
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Macromolecules (publishedVersion, cc-by)
- ORBi UMONS (submittedVersion, other-oa)
- Communities in ADDI (University of the Basque Country) (submittedVersion, cc-by)
- Hispana (submittedVersion, cc-by)
- CINECA IRIS Institutial Research Information System (University of Genoa) (submittedVersion)
- Funders
- Eusko Jaurlaritza (IT1503-22)
- Euskal Herriko Unibertsitatea
- National Natural Science Foundation of China (51820105005)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Foaming and Composites
- Keywords
- polycaprolactone, molecular weight effects, crystallization kinetics, self-nucleation, successive self-nucleation and annealing, spherulites, lamellar thickness, long period, chain folding, crystallinity, chain entanglement
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.