Effect of Molecular Weight on the Crystallization and Melt Memory of Poly(ε-caprolactone) (PCL)
Open accessThe DOI matches its Crossref record; 74 of the 75 references it cites were found in a registry or an index, and 1 are not checked yet.
Abstract
High Resolution Image Download MS PowerPoint Slide The role of the molecular weight in the crystallization and melt memory of poly(ε-caprolactone) (PCL) was investigated. To this end, 10 PCL samples of synthetic and commercial origin and different chain ends, covering a number-average molecular weight ( M n ) range between 0.48 and 70.5 kg/mol, were analyzed. Polarized light optical microscopy, differential scanning calorimetry, and small-angle X-ray scattering (SAXS) were employed for in-depth characterization. The thermal transitions, morphology, crystallization kinetics, structural parameters, and memory effects were evaluated as a function of M n . The melting temperature and the equilibrium melting temperature saturate at a particular M n . Instead, the crystallization temperature and the degree of crystallinity display an optimum M n at which the parameters reach a maximum, describing a bell-shaped behavior as a function of M n . Similarly, the primary nucleation rate, spherulitic growth rate, and overall crystallization rate exhibit a bell-shaped behavior as a function of M n, attributed to a competition between nucleation and diffusion. SAXS analysis, which includes the long period and lamellar thickness determination, revealed that at M n < 2.0 kg/mol, PCL crystallizes in an extended-chain conformation, while at M n ≥ 2.0 kg/mol, folded chains are already present. In line with these results, the morphological study showed that the PCL crystallizes as axialites at M n < 2.0 kg/mol and at higher M n as spherulites. The melt memory effect of PCL, studied by self-nucleation experiments, increases with M n due to the simultaneous increase of entanglements and the number of chain folding within the constituent crystalline lamellae per chain. Successive self-nucleation and annealing (SSA) experiments revealed that the PCL samples exhibit a similar SSA profile, indicating that the M n does not influence the intermolecular interactions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“It has been reported that the stereocomplex crystal formation can be controlled by the diffusion of the enantiomeric chains.75”
From Correlative characterization of stereocomplex formation in blends of aliphatic polyester P(PCL m - b -PLLA n ) multiblock-copolymers and PDLA (2026) · cites this paper as [75]
Experimental — accuracy not yet measuredThe check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“Pengju´s group 75 confirmed that after rapid solvent evaporation SC formation was exclusively achieved compared to slow solvent evaporation, which was attributed to simultaneous folding of PLLA and PDLA chains.”
From Correlative characterization of stereocomplex formation in blends of aliphatic polyester P(PCL m - b -PLLA n ) multiblock-copolymers and PDLA (2026) · cites this paper as [75]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Synthesis of polycaprolactone: A review
Labet, M., & Thielemans, W. (2009) · Chemical Society Reviews · doi:10.1039/b820162p · Cited by 1,673
Melting process and the equilibrium melting temperature of polychlorotrifluoroethylene
Hoffman, J. D., & Weeks, J. J. (1962) · Journal of Research of the National Bureau of Standards Section A: Physics and Chemistry · doi:10.6028/jres.066a.003 · Cited by 1,490
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Degradation mechanisms of polycaprolactone in the context of chemistry, geometry and environment
Bartnikowski, M., Dargaville, T. R., Ivanovski, S., & Hutmacher, D. W. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.05.004 · Cited by 769
Lorenzo, A. T., Arnal, M. L., Albuerne, J., & Müller, A. J. (2007) · Polymer Testing · doi:10.1016/j.polymertesting.2006.10.005 · Cited by 699
Self-citationFillon, B., Wittmann, J. C., Lotz, B., & Thierry, A. (1993) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.1993.090311013 · Cited by 651
Thermal fractionation of polymers
Müller, A. J., & Arnal, M. L. (2005) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2005.03.001 · Cited by 376
Self-citationMüller, A. J., Hernández, Z. H., Arnal, M. L., & Sánchez, J. J. (1997) · Polymer Bulletin · doi:10.1007/s002890050174 · Cited by 318
Self-citationStructural Studies of Polyesters. III. Crystal Structure of Poly-ε-caprolactone
Chatani, Y., Okita, Y., Tadokoro, H., & Yamashita, Y. (1970) · Polymer Journal · doi:10.1295/polymj.1.555 · Cited by 305
Nucleation and Crystallization in Diblock and Triblock Copolymers
Müller, A. J., Balsamo, V., & Arnal, M. L. (2005) · Advances in Polymer Science · doi:10.1007/12_001 · Cited by 294
Self-citationSelf-Nucleation Effects on Polymer Crystallization
Sangroniz, L., Cavallo, D., & Müller, A. J. (2020) · Macromolecules · doi:10.1021/acs.macromol.0c00223 · Cited by 283
Self-citationMolecular weight dependence of viscoelasticity of polycaprolactone critical gels
Izuka, A., Winter, H. H., & Hashimoto, T. (1992) · Macromolecules · doi:10.1021/ma00035a020 · Cited by 254
Effect of annealing time on the self-nucleation behavior of semicrystalline polymers
Lorenzo, A. T., Arnal, M. L., Sánchez, J. J., & Müller, A. J. (2006) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.20832 · Cited by 245
Self-citationPhase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review
Fortelny, I., Ujcic, A., Fambri, L., & Slouf, M. (2019) · Frontiers in Materials · doi:10.3389/fmats.2019.00206 · Cited by 238
Crystal structure of poly(iε-caprolactone)
Hu, H., & Dorset, D. L. (1990) · Macromolecules · doi:10.1021/ma00223a017 · Cited by 225
Trujillo, M., Arnal, M. L., Müller, A. J., Laredo, E., Bredeau, S., Bonduel, D., & Dubois, P. (2007) · Macromolecules · doi:10.1021/ma071025m · Cited by 211
Self-citationSuccessive Self-nucleation and Annealing (SSA): Correct design of thermal protocol and applications
Müller, A. J., Michell, R. M., Pérez, R. A., & Lorenzo, A. T. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.01.015 · Cited by 206
Self-citationDifferential Scanning Calorimetry of Polymers
Müller, A. J., & Michell, R. M. (2016) · Polymer Morphology · doi:10.1002/9781118892756.ch5 · Cited by 196
Self-citationKfoury, G., Raquez, J.-M., Hassouna, F., Odent, J., Toniazzo, V., Ruch, D., & Dubois, P. (2013) · Frontiers in Chemistry · doi:10.3389/fchem.2013.00032 · Cited by 182
Shin, E. J., Jeong, W., Brown, H. A., Koo, B. J., Hedrick, J. L., & Waymouth, R. M. (2011) · Macromolecules · doi:10.1021/ma102970m · Cited by 175
The effect of molecular weight on the crystallization kinetics of polycaprolactone
Jenkins, M. J., & Harrison, K. L. (2006) · Polymers for Advanced Technologies · doi:10.1002/pat.733 · Cited by 172
Strategies for Producing Improved Oxygen Barrier Materials Appropriate for the Food Packaging Sector
Khajavi, M. Z., Ebrahimi, A., Yousefi, M., Ahmadi, S., Farhoodi, M., Alizadeh, A. M., & Taslikh, M. (2020) · Food Engineering Reviews · doi:10.1007/s12393-020-09235-y · Cited by 167
Michell, R. M., Mugica, A., Zubitur, M., & Müller, A. J. (2015) · Advances in Polymer Science · doi:10.1007/12_2015_327 · Cited by 159
Self-citationNature of self-seeding polyethylene crystal nuclei
Blundell, D. J., & Keller, A. (1968) · Journal of Macromolecular Science, Part B · doi:10.1080/00222346808212454 · Cited by 148
Wurm, A., Zhuravlev, E., Eckstein, K., Jehnichen, D., Pospiech, D., Androsch, R., Wunderlich, B., & Schick, C. (2012) · Macromolecules · doi:10.1021/ma300363b · Cited by 144
Müller, A. J., Albuerne, J., Marquez, L., Raquez, J.-M., Degée, P., Dubois, P., Hobbs, J., & Hamley, I. W. (2005) · Faraday Discuss. · doi:10.1039/b403085k · Cited by 141
Self-citationThe origin of memory effects in the crystallization of polyamides: Role of hydrogen bonding
Liu, X., Wang, Y., Wang, Z., Cavallo, D., Müller, A. J., Zhu, P., Zhao, Y., Dong, X., & Wang, D. (2020) · Polymer · doi:10.1016/j.polymer.2019.122117 · Cited by 128
Self-citationA synchrotron X-ray study of melting and recrystallization in isotactic polypropylene
Ryan, A. J., Stanford, J., Bras, W., & Nye, T. M. W. (1997) · Polymer · doi:10.1016/s0032-3861(96)00583-6 · Cited by 127
Pérez, R., Córdova, M. E., Vergara-López, J., Hoskins, J. N., Zhang, B., Grayson, S. M., & Müller, A. J. (2013) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2013.10.013 · Cited by 125
Self-citationSupernucleation and crystallization regime change provoked by MWNT addition to poly(ε-caprolactone)
Trujillo, M., Arnal, M. L., Müller, A. J., Mujica, M. A., de Navarro, C. U., Ruelle, B., & Dúbois, P. (2011) · Polymer · doi:10.1016/j.polymer.2011.12.028 · Cited by 115
Self-citationSpherulitic Crystallization Behavior of Poly(ε-caprolactone) with a Wide Range of Molecular Weight
Chen, H.-L., Li, L.-J., Ou-Yang, W.-C., Hwang, J. C., & Wong, W.-Y. (1997) · Macromolecules · doi:10.1021/ma960673v · Cited by 113
Crystallization studies of poly(ε‐caprolactone).I. Morphology and kinetics
Phillips, P. J., Rensch, G. J., & Taylor, K. D. (1987) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.1987.090250814 · Cited by 106
Experimental and Data Fitting Guidelines for the Determination of Polymer Crystallization Kinetics
Pérez‐Camargo, R. A., Liu, G., Wang, D., & Müller, A. J. (2022) · Chinese Journal of Polymer Science · doi:10.1007/s10118-022-2724-2 · Cited by 103
Self-citationWang, Z., Hsiao, B. S., Fu, B., Liu, L., Yeh, F., Sauer, B. B., Chang, H.-T., & Schultz, J. M. (2000) · Polymer · doi:10.1016/s0032-3861(99)00327-4 · Cited by 102
Effect of molecular weight on the crystallization and morphology of poly (ethylene oxide) fractions
Godovsky, Y. K., Slonimsky, G. L., & Garbar, N. M. (1972) · Journal of Polymer Science Part C: Polymer Symposia · doi:10.1002/polc.5070380103 · Cited by 102
Su, H.-H., Chen, H., Díaz, A., Casas, M. T., Puiggalí, J., Hoskins, J. N., Grayson, S. M., Pérez, R., & Müller, A. J. (2012) · Polymer · doi:10.1016/j.polymer.2012.11.066 · Cited by 96
Self-citationCórdova, M. E., Lorenzo, A. T., Müller, A. J., Hoskins, J. N., & Grayson, S. M. (2011) · Macromolecules · doi:10.1021/ma200394h · Cited by 95
Self-citationColomer, P., Ribas, S. M., & Guzmán, G. M. (1985) · Polymer · doi:10.1016/0032-3861(85)90205-8 · Cited by 94
Zaldua, N., Liénard, R., Josse, T., Zubitur, M., Mugica, A., Iturrospe, A., Arbe, A., De Winter, J., Coulembier, O., & Müller, A. J. (2018) · Macromolecules · doi:10.1021/acs.macromol.7b02638 · Cited by 93
Self-citationContinuous cooling and isothermal crystallization of polycaprolactone
Skoglund, P., & Fransson, �. (1996) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19960926)61:13<2411::aid-app21>3.0.co;2-5 · Cited by 92
Continuous cooling and isothermal crystallization of polycaprolactone
Skoglund, P., & Fransson, �. (1996) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19960926)61:13<2455::aid-app25>3.0.co;2-1 · Cited by 92
Kurz, R., Schulz, M., Scheliga, F., Men, Y., Seidlitz, A., Thurn-Albrecht, T., & Saalwächter, K. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b00809 · Cited by 86
Chemical Structure Drives Memory Effects in the Crystallization of Homopolymers
Sangroniz, L., Sangroniz, A., Meabe, L., Basterretxea, A., Sardon, H., Cavallo, D., & Müller, A. J. (2020) · Macromolecules · doi:10.1021/acs.macromol.0c00751 · Cited by 84
Self-citationSchulz, M., Schäfer, M., Saalwächter, K., & Thurn-Albrecht, T. (2022) · Nature Communications · doi:10.1038/s41467-021-27752-0 · Cited by 81
Differences between isotropic and self-nucleated PCL melts detected by dielectric experiments
Sangroniz, L., Alamo, R. G., Cavallo, D., Santamaría, A., Müller, A. J., & Alegría, A. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b00708 · Cited by 81
Self-citationPérez, R. A., López, J. V., Hoskins, J. N., Zhang, B., Grayson, S. M., Casas, M. T., Puiggalí, J., & Müller, A. J. (2014) · Macromolecules · doi:10.1021/ma5005869 · Cited by 75
Self-citationSchulz, M., Seidlitz, A., Kurz, R., Bärenwald, R., Petzold, A., Saalwächter, K., & Thurn‐Albrecht, T. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b01102 · Cited by 73
The influence of molecular weight on the regime crystallization of linear polyethylene
Fatou, J. G., Marco, C., & Mandelkern, L. (1990) · Polymer · doi:10.1016/0032-3861(90)90186-3 · Cited by 68
Viscoelastic behaviour and flow instabilities of biodegradable poly (ε-caprolactone) polyesters
Noroozi, N., Thomson, J. A., Noroozi, N., Schafer, L. L., & Hatzikiriakos, S. G. (2011) · Rheologica Acta · doi:10.1007/s00397-011-0586-6 · Cited by 66
Rheology of self-nucleated poly(ɛ-caprolactone) melts
Sangroniz, L., Barbieri, F., Cavallo, D., Santamaria, A., Alamo, R. G., & Müller, A. J. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.01.009 · Cited by 63
Self-citationPérez‐Camargo, R. A., Meabe, L., Liu, G., Sardón, H., Zhao, Y., Wang, D., & Müller, A. J. (2020) · Macromolecules · doi:10.1021/acs.macromol.0c02374 · Cited by 59
Self-citationBulk polymerization of ε-caprolactone: Rheological predictive laws
Gimenez, J., Cassagnau, P., & Michel, A. (2000) · Journal of Rheology · doi:10.1122/1.551099 · Cited by 58
The molecular weight dependence of the crystallization rate for linear polyethylene fractions
Mandelkern, L., Fatou, J. G., & Ohno, K. (1968) · Journal of Polymer Science Part B Polymer Letters · doi:10.1002/pol.1968.110060901 · Cited by 55
Pérez‐Camargo, R. A., Saenz, G., Laurichesse, S., Casas, M. T., Puiggalí, J., Avérous, L., & Müller, A. J. (2015) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.23897 · Cited by 53
Self-citationEffect of hydrogen on ethylene polymerization using in-situ supported metallocene catalysts
Chu, K.-J., Soares, J. B. P., & Penlidis, A. (2000) · Macromolecular Chemistry and Physics · doi:10.1002/(sici)1521-3935(20000301)201:5<479::aid-macp479>3.0.co;2-f · Cited by 52
Safari, M., Múgica, A., Zubitur, M., de Ilarduya, A. M., Muñoz‐Guerra, S., & Müller, A. J. (2019) · Polymers · doi:10.3390/polym12010017 · Cited by 51
Self-citationSchmalz, H., Müller, A. J., & Abetz, V. (2003) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200290063 · Cited by 48
Self-citationThe crystallization kinetics of low-molecular-weight polyethylene fractions
Fatou, J. G., Marco, C., & Mandelkern, L. (1990) · Polymer · doi:10.1016/0032-3861(90)90052-z · Cited by 48
MOLECULAR WEIGHT DEPENDENCE OF CRYSTAL GROWTH RATE AND ITS DEGREE OF SUPERCOOLING EFFECT
Umemoto, S., Kobayashi, N. P., & Okui, Ν. (2002) · Journal of Macromolecular Science Part B · doi:10.1081/mb-120013074 · Cited by 46
Klonos, P. Α., Bikiaris, N. D., Christodoulou, E., Zamboulis, A., Papageorgiou, G. Z., & Kyritsis, A. (2022) · Polymer · doi:10.1016/j.polymer.2022.124603 · Cited by 43
Jiang, Z., Wang, Y., Fu, L., Whiteside, B., Wyborn, J., Norris, K. C., Wu, Z., Coates, P. D., & Men, Y. (2013) · Macromolecules · doi:10.1021/ma401052x · Cited by 41
Recent applications of the Successive Self-nucleation and Annealing thermal fractionation technique
Pérez-Camargo, R. A., Cavallo, D., & Müller, A. J. (2022) · Frontiers in Soft Matter · doi:10.3389/frsfm.2022.1003500 · Cited by 37
Self-citationLi, Z., Wang, J., Pérez‐Camargo, R. A., Müller, A. J., Zhang, B., Grayson, S. M., & Hu, W. (2016) · Polymer International · doi:10.1002/pi.5157 · Cited by 32
Self-citationEffect of annealing time and molecular weight on melt memory of random ethylene 1‐butene copolymers
Chen, X., Qu, C., & Alamo, R. G. (2018) · Polymer International · doi:10.1002/pi.5586 · Cited by 32
Melt-memory of polyethylenes with halogen substitution: Random vs. precise placement
Marxsen, S. F., & Alamo, R. G. (2019) · Polymer · doi:10.1016/j.polymer.2019.02.030 · Cited by 32
Effect of Chain Stereoconfiguration on Poly(3-hydroxybutyrate) Crystallization Kinetics
Caputo, M. R., Tang, X., Westlie, A. H., Sardón, H., Chen, E. Y. ‐., & Müller, A. J. (2022) · Biomacromolecules · doi:10.1021/acs.biomac.2c00682 · Cited by 30
Self-citationDu, Z., Yang, Y., Xu, J., & Fan, Z. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.25932 · Cited by 26
Ugartemendia, J. M., Muñoz, M. E., Sarasua, J.-R., & Santamaría, A. (2014) · Rheologica Acta · doi:10.1007/s00397-014-0797-8 · Cited by 25
Melt Memory Effects in Poly(butylene succinate) Studied by Differential Fast Scanning Calorimetry
Sangroniz, L., Ocando, C., Cavallo, D., & Müller, A. J. (2020) · Polymers · doi:10.3390/polym12122796 · Cited by 25
Self-citationBulk Crystallization Behavior of Poly(ε-caprolactone) with a Wide Range of Molecular Weight
Ou-Yang, W.-C., Li, L., Chen, H., & Hwang, J. C. (1997) · Polymer Journal · doi:10.1295/polymj.29.889 · Cited by 25
Wang, X., Yi, J., Wang, L., & Feng, J. (2021) · Polymer · doi:10.1016/j.polymer.2021.124060 · Cited by 17
Maiz, J., Liu, G., Ruipérez, F., Delbosc, N., Coulembier, O., Wang, D., & Müller, A. J. (2019) · Journal of Materials Chemistry C · doi:10.1039/c9tc01609k · Cited by 10
Self-citationEnd groups affected crystallization behavior of unentangled poly(ε-caprolactone)s
Zhu, L., Li, J., Li, H., Liu, B., Chen, J., & Jiang, S. (2022) · Polymer · doi:10.1016/j.polymer.2022.124534 · Cited by 10
Balsamo, V., Paolini, Y., Ronca, G., & Müller, A. J. (2000) · Macromolecular Chemistry and Physics · doi:10.1002/1521-3935(20001201)201:18<2711::aid-macp2711>3.0.co;2-6
Self-citation
Research works printed but not linked: 2
- Mathot V. B. F., 1995, Calorymetry and Thermal Analysis of Polymers
- 10.1002/(sici)1521-3935(20000301)201:5 · doi:10.1002/(sici)1521-3935(20000301)201:5
Cited by
Advancements in Wearable and Implantable BioMEMS Devices: Transforming Healthcare Through Technology
Abhinav, V., Basu, P., Verma, S. S., Verma, J., Das, A., Kumari, S., Yadav, P. R., & Kumar, V. (2025) · Micromachines · doi:10.3390/mi16050522 · Cited by 121
Advances in PCL, PLA, and PLGA-Based Technologies for Anticancer Drug Delivery
Kim, Y., Kwak, J., Lim, M., Lim, S. Y., Chae, S., Ha, S., Won, Y., Kim, H., & Lim, K. S. (2025) · Pharmaceutics · doi:10.3390/pharmaceutics17101354 · Cited by 71
Pérez‐Camargo, R. A., Safari, M., Rodríguez, J. T., Liao, Y., & Müller, A. J. (2023) · Polymer · doi:10.1016/j.polymer.2023.126412 · Cited by 40
Self-citationZhang, R., Chen, W., & Miyoshi, T. (2024) · Macromolecules · doi:10.1021/acs.macromol.3c02535 · Cited by 37
Disappearance of Melt Memory Effect with Comonomer Incorporation in Isodimorphic Random Copolyesters
Sangroniz, L., Safari, M., de Ilarduya, A. M., Sardón, H., Cavallo, D., & Müller, A. J. (2023) · Macromolecules · doi:10.1021/acs.macromol.3c01389 · Cited by 31
Self-citation
Metadata
- Authors
- Fernández-Tena, A., Pérez-Camargo, R. A., Coulembier, O., Sangroniz, L., Aranburu, N., Guerrica-Echevarria, G., Liu, G., Wang, D., Cavallo, D., & Müller, A. J.
- Affiliations
- POLYMAT and Department of Polymers and Advanced Materials: Physics, Chemistry and Technology, Faculty of Chemistry, University of the Basque Country UPV/EHU, Paseo Manuel de Lardizabal 3, 20018 Donostia-San Sebastián, Spain
- Beijing National Laboratory for Molecular Science, CAS Key Laboratory of Engineering Plastics, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190, China
- University of Mons (BE)
- University of the Basque Country (ES)
- Chinese Academy of Sciences (CN)
- University of Genoa (IT)
- Ikerbasque (ES)
- Corresponding author
- Müller, Alejandro J.
- ORCID
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2023-06-07
- Volume
- 56
- Issue
- 12
- Pages
- 4602-4620
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W4379618677
- Cited by
- 200
- References
- 71
- Citations by year
- 2026: 69 · 2025: 79 · 2024: 42 · 2023: 10
- FWCI
- 15.18
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Macromolecules (publishedVersion, cc-by)
- ORBi UMONS (submittedVersion, other-oa)
- Communities in ADDI (University of the Basque Country) (submittedVersion, cc-by)
- Hispana (submittedVersion, cc-by)
- CINECA IRIS Institutial Research Information System (University of Genoa) (submittedVersion)
- Funders
- Eusko Jaurlaritza (IT1503-22)
- Euskal Herriko Unibertsitatea
- National Natural Science Foundation of China (51820105005)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Foaming and Composites
- Keywords
- polycaprolactone, molecular weight effects, crystallization kinetics, self-nucleation, successive self-nucleation and annealing, spherulites, lamellar thickness, long period, chain folding, crystallinity, chain entanglement
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.