Effect of Molecular Weight on the Crystallization and Melt Memory of Poly(ε-caprolactone) (PCL)
Open accessThe DOI matches its Crossref record; 74 of the 75 references it cites were found in a registry or an index, and 1 are not checked yet.
Abstract
High Resolution Image Download MS PowerPoint Slide The role of the molecular weight in the crystallization and melt memory of poly(ε-caprolactone) (PCL) was investigated. To this end, 10 PCL samples of synthetic and commercial origin and different chain ends, covering a number-average molecular weight ( M n ) range between 0.48 and 70.5 kg/mol, were analyzed. Polarized light optical microscopy, differential scanning calorimetry, and small-angle X-ray scattering (SAXS) were employed for in-depth characterization. The thermal transitions, morphology, crystallization kinetics, structural parameters, and memory effects were evaluated as a function of M n . The melting temperature and the equilibrium melting temperature saturate at a particular M n . Instead, the crystallization temperature and the degree of crystallinity display an optimum M n at which the parameters reach a maximum, describing a bell-shaped behavior as a function of M n . Similarly, the primary nucleation rate, spherulitic growth rate, and overall crystallization rate exhibit a bell-shaped behavior as a function of M n, attributed to a competition between nucleation and diffusion. SAXS analysis, which includes the long period and lamellar thickness determination, revealed that at M n < 2.0 kg/mol, PCL crystallizes in an extended-chain conformation, while at M n ≥ 2.0 kg/mol, folded chains are already present. In line with these results, the morphological study showed that the PCL crystallizes as axialites at M n < 2.0 kg/mol and at higher M n as spherulites. The melt memory effect of PCL, studied by self-nucleation experiments, increases with M n due to the simultaneous increase of entanglements and the number of chain folding within the constituent crystalline lamellae per chain. Successive self-nucleation and annealing (SSA) experiments revealed that the PCL samples exhibit a similar SSA profile, indicating that the M n does not influence the intermolecular interactions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“It has been reported that the stereocomplex crystal formation can be controlled by the diffusion of the enantiomeric chains.75”
From Correlative characterization of stereocomplex formation in blends of aliphatic polyester P(PCL m - b -PLLA n ) multiblock-copolymers and PDLA (2026) · cites this paper as [75]
Experimental — accuracy not yet measuredThe check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“Pengju´s group 75 confirmed that after rapid solvent evaporation SC formation was exclusively achieved compared to slow solvent evaporation, which was attributed to simultaneous folding of PLLA and PDLA chains.”
From Correlative characterization of stereocomplex formation in blends of aliphatic polyester P(PCL m - b -PLLA n ) multiblock-copolymers and PDLA (2026) · cites this paper as [75]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Synthesis of polycaprolactone: A review
Labet, M., & Thielemans, W. (2009) · Chemical Society Reviews · doi:10.1039/b820162p · Cited by 1,673
Melting process and the equilibrium melting temperature of polychlorotrifluoroethylene
Hoffman, J. D., & Weeks, J. J. (1962) · Journal of Research of the National Bureau of Standards Section A: Physics and Chemistry · doi:10.6028/jres.066a.003 · Cited by 1,490
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Degradation mechanisms of polycaprolactone in the context of chemistry, geometry and environment
Bartnikowski, M., Dargaville, T. R., Ivanovski, S., & Hutmacher, D. W. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.05.004 · Cited by 769
Lorenzo, A. T., Arnal, M. L., Albuerne, J., & Müller, A. J. (2007) · Polymer Testing · doi:10.1016/j.polymertesting.2006.10.005 · Cited by 699
Self-citationFillon, B., Wittmann, J. C., Lotz, B., & Thierry, A. (1993) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.1993.090311013 · Cited by 651
Thermal fractionation of polymers
Müller, A. J., & Arnal, M. L. (2005) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2005.03.001 · Cited by 376
Self-citationMüller, A. J., Hernández, Z. H., Arnal, M. L., & Sánchez, J. J. (1997) · Polymer Bulletin · doi:10.1007/s002890050174 · Cited by 318
Self-citationStructural Studies of Polyesters. III. Crystal Structure of Poly-ε-caprolactone
Chatani, Y., Okita, Y., Tadokoro, H., & Yamashita, Y. (1970) · Polymer Journal · doi:10.1295/polymj.1.555 · Cited by 305
Research works printed but not linked: 2
- Mathot V. B. F., 1995, Calorymetry and Thermal Analysis of Polymers
- 10.1002/(sici)1521-3935(20000301)201:5 · doi:10.1002/(sici)1521-3935(20000301)201:5
Cited by
Advancements in Wearable and Implantable BioMEMS Devices: Transforming Healthcare Through Technology
Abhinav, V., Basu, P., Verma, S. S., Verma, J., Das, A., Kumari, S., Yadav, P. R., & Kumar, V. (2025) · Micromachines · doi:10.3390/mi16050522 · Cited by 124
Advances in PCL, PLA, and PLGA-Based Technologies for Anticancer Drug Delivery
Kim, Y., Kwak, J., Lim, M., Lim, S. Y., Chae, S., Ha, S., Won, Y., Kim, H., & Lim, K. S. (2025) · Pharmaceutics · doi:10.3390/pharmaceutics17101354 · Cited by 71
Pérez‐Camargo, R. A., Safari, M., Rodríguez, J. T., Liao, Y., & Müller, A. J. (2023) · Polymer · doi:10.1016/j.polymer.2023.126412 · Cited by 40
Self-citationZhang, R., Chen, W., & Miyoshi, T. (2024) · Macromolecules · doi:10.1021/acs.macromol.3c02535 · Cited by 37
Disappearance of Melt Memory Effect with Comonomer Incorporation in Isodimorphic Random Copolyesters
Sangroniz, L., Safari, M., de Ilarduya, A. M., Sardón, H., Cavallo, D., & Müller, A. J. (2023) · Macromolecules · doi:10.1021/acs.macromol.3c01389 · Cited by 31
Self-citationOrigin of Melt Memory Effects in Poly(ethylene oxide): The Crucial Role of Entanglements
Sangroniz, L., Müller, A. J., & Cavallo, D. (2024) · Macromolecular Rapid Communications · doi:10.1002/marc.202400011 · Cited by 28
Self-citationXia, T., Xiao, L., Sun, K., Rho, J. Y., Xie, Y., Parkinson, S. J., Sangroniz, L., Zhang, J., Lin, J., Müller, A. J., et al. (2024) · Macromolecules · doi:10.1021/acs.macromol.4c02496 · Cited by 30
Self-citationMolecular and Macroscopic Considerations for Degradable Aliphatic Polyester Biomaterial Design
Wheeler, B. P., Medd, K., Woodworth, K. E., & Huyer, L. D. (2025) · Biomacromolecules · doi:10.1021/acs.biomac.5c00765 · Cited by 28
Next-Generation Wound Healing Materials: Role of Biopolymers and Their Composites
Park, J.-H., & De, R. (2025) · Polymers · doi:10.3390/polym17162244 · Cited by 33
Fernández‐Tena, A., Guerrica‐Echevarría, G., Aranburu, N., Wang, Z., Cavallo, D., & Müller, A. J. (2023) · ACS Applied Polymer Materials · doi:10.1021/acsapm.3c02220 · Cited by 28
Self-citationD'Amario, J., Limsukon, W., Bher, A., & Auras, R. (2025) · RSC Applied Polymers · doi:10.1039/d5lp00041f · Cited by 22
Yoon, S., Kang, S. H., Choi, J., Kim, J. Y., Lee, Y.-G., Park, Y., & Shin, D. O. (2024) · Small · doi:10.1002/smll.202407882 · Cited by 25
Tailoring the Nucleation and Crystallization Rate of Polyhydroxybutyrate by Copolymerization
Caputo, M. R., Shi, C., Tang, X., Sardón, H., Chen, E. Y. ‐., & Müller, A. J. (2023) · Biomacromolecules · doi:10.1021/acs.biomac.3c00808 · Cited by 22
Self-citationChen, X., Pérez‐Camargo, R. A., Ma, P., Liao, Y., Zhao, Y., Dong, J., Dong, X., Müller, A. J., & Wang, D. (2024) · Macromolecules · doi:10.1021/acs.macromol.4c02256 · Cited by 20
Self-citationKryszak, B., Ujčić, A., Gajdošová, V., Šlouf, M., & Szustakiewicz, K. (2025) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2025.06.234 · Cited by 23
Enhancing melt strength and crystallization kinetics in polylactide: Influence of chain topology
Fernández‐Tena, A., Fernández, M., Sandoval, A. J., Calafel, I., Aguirre, A. S., Aranburu, N., Guerrica‐Echevarría, G., Lorenzo, M. L. D., Longo, A., Vega, J. F., et al. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.136783 · Cited by 21
Self-citationShakil, U. A., & Hájek, P. (2025) · Polymer Composites · doi:10.1002/pc.70714 · Cited by 19
Wang, S., Zhao, K., Li, J., Yu, X., Zhang, Q., & Han, Y. (2023) · Macromolecular Rapid Communications · doi:10.1002/marc.202300624 · Cited by 18
Synthesis of novel bio-based and degradable polyurethanes using lignin oligomers
Terreni, E., Caserio, L., Mauri, E., Storti, G., & Moscatelli, D. (2024) · Chemical Engineering Science · doi:10.1016/j.ces.2024.120325 · Cited by 17
Dulac, L., Kedzierski, M., & Bruzaud, S. (2025) · Polymer Testing · doi:10.1016/j.polymertesting.2025.108861 · Cited by 19
Self-Healable and Degradable Polycaprolactone-Based Polymeric Binders for Lithium-Ion Batteries
Lim, T., Yoon, J. Y., Lee, C. S., Baek, K., Jeon, J., & Cho, S. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.4c00097 · Cited by 16
Nucleation Site Memory in the Spherulite Films of Polydisperse Poly( l -lactic acid)
Lu, S., Chen, M., & Li, H. (2024) · Macromolecules · doi:10.1021/acs.macromol.4c01669 · Cited by 16
Lu, Y., Lyu, D., & Men, Y. (2023) · Macromolecules · doi:10.1021/acs.macromol.3c01906 · Cited by 15
Light-Based 3D Printing of Polyesters: From Synthesis to Fabrication
Thijssen, Q., Quaak, A., Bijleveld, B., Li, B., Daele, L. V., Heise, A., & Vlierberghe, S. V. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.5c00611 · Cited by 16
Yao, H., Zhu, W., Zhu, X., Yi, X., Yao, J., Yuan, X. F., Chen, F., & Han, X. (2024) · Polymers · doi:10.3390/polym16060731 · Cited by 17
Alkhamis, H., Saretia, S., Schwanz, S., Machatschek, R., Neffe, A. T., & Polak-Kraśna, K. (2025) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2025.111267 · Cited by 12
Self-Nucleation Ability and Intermolecular Interactions Mechanism in Fluoropolyolefins
Li, Y., Wang, S., Wu, T., Meng, X., & Ye, H. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.4c00860 · Cited by 11
Sha, X., Duan, J., & Feng, J. (2025) · Macromolecules · doi:10.1021/acs.macromol.4c03187 · Cited by 11
Factors modulating the hydrolysis of Nylon-6,6 by a nylon hydrolase enzyme
Bocharova, V., Drufva, E. E., Cahill, J. F., Popov, I., Dishner, I. T., Zhou, M., Jung, G. S., Ullman, A. M., Carper, D. L., Damron, J. T., et al. (2025) · Polymer Chemistry · doi:10.1039/d5py00023h · Cited by 11
Shen, J., Zhang, J.-B., Kong, W.-H., Ma, Y., Liu, S.-F., & Li, Z.-B. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c00076 · Cited by 10
Crystallization of Polycaprolactone within Nanopapers Based on Graphene-Related Materials
Zhao, H., Pérez‐Camargo, R. A., Damonte, G., Armandi, M., Monticelli, O., Liu, G., Müller, A. J., & Fina, A. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c00752 · Cited by 11
Self-citationSangroniz, L., Olmedo‐Martínez, J. L., Hu, W., Jang, Y.-J., Liu, G., Hillmyer, M. A., & Müller, A. J. (2024) · Biomacromolecules · doi:10.1021/acs.biomac.4c01191 · Cited by 11
Self-citationdel Amo, J., Bravo, P., Alashry, M. M., Tejeda, J., Rodríguez, J. F., & Borreguero, A. M. (2024) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.4c05482 · Cited by 10
Le, A. N., Monegro, R. H., Mountziaris, I., Avila-Martinez, Y., Carrow, B. P., Robertson, M. L., & Krishnamoorti, R. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c00998 · Cited by 10
Paul, K., Darzi, S., O’Connell, C. D., Hennes, D. M. Z. B., Rosamilia, A., Gargett, C. E., Werkmeister, J. A., & Mukherjee, S. (2024) · Advanced Science · doi:10.1002/advs.202405004 · Cited by 13
Ngwenya, M., Gumede, T. P., Pérez Camargo, R. A., & Motloung, B. (2025) · Materials · doi:10.3390/ma18225172 · Cited by 9
Pérez‐Camargo, R. A., & Müller, A. J. (2026) · ACS Applied Polymer Materials · doi:10.1021/acsapm.5c04486 · Cited by 9
Self-citationTougher Bioadhesives through Dual Stimulation Strategies
Ang, E. W. J., Djordjevic, I., Šolić, I., Goh, C. Y., & Steele, T. W. J. (2024) · Advanced Healthcare Materials · doi:10.1002/adhm.202303666 · Cited by 9
García-García, M., Orona‐Tamayo, D., Estrada‐Monje, A., Quintana-Rodríguez, E., Navarro, R., Hernández-Perales, L., Lozoya‐Pérez, N. E., & Jaime-Ferrer, J. S. (2025) · Journal of Polymers and the Environment · doi:10.1007/s10924-025-03492-w · Cited by 11
Cavalcante, M. D. P., & de Menezes, L. R. (2023) · Polymers for Advanced Technologies · doi:10.1002/pat.6224 · Cited by 10
Rhee, D. D., Troiano, E. M., Floyd, G. A., & Kiran, E. (2024) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2024.106293 · Cited by 8
Polymer extended-chain crystals: Preparation, formation mechanisms and performances
Li, N., Chen, J., Wu, T., Meng, X., Zhou, Q., & Ye, H. (2025) · Polymer · doi:10.1016/j.polymer.2025.128656 · Cited by 8
Lin, D., Wei, H., Wei, J., Xu, J., Zhang, C., & Wang, X. (2024) · Macromolecules · doi:10.1021/acs.macromol.3c02251 · Cited by 8
Shen, J., Yang, F., Liao, Y., Ma, Z., & Li, Y. (2024) · Macromolecules · doi:10.1021/acs.macromol.4c00721 · Cited by 8
He, M., Li, R., Hao, M., Tao, Y., Wang, P., Bian, X., Dang, H.-C., Wang, Y., Li, Z., & Zhang, T. (2024) · Polymers · doi:10.3390/polym16172448 · Cited by 8
RAFT/ROP binary polymerization towards well-defined graft copolymers
Zhang, S., Ren, N., Li, X., Xiao, Y., Lang, M., & Zhu, X. (2024) · Polymer Chemistry · doi:10.1039/d4py00279b · Cited by 8
Ma, C., An, H., Kim, Y., Kim, S.-Y., Jang, Y., & Lee, M. (2024) · RSC Advances · doi:10.1039/d4ra00799a · Cited by 8
Yan, Z., Hsu, T., Wu, C., Benas, J., Huang, Y.-C., Chen, W., Lin, B., Chen, M., Lin, J., Tsai, H., et al. (2025) · Advanced Science · doi:10.1002/advs.202508812 · Cited by 11
Pérez‐Camargo, R. A., & Müller, A. J. (2026) · Polymer · doi:10.1016/j.polymer.2026.129575 · Cited by 9
Self-citationAboudzadeh, M. A., Sangroniz, L., Coulembier, O., Ferranti, M., Costanzo, S., Grizzuti, N., Cavallo, D., & Müller, A. J. (2026) · Macromolecules · doi:10.1021/acs.macromol.5c03323 · Cited by 8
Self-citationMarecik, S., Pudełko, I., Balasubramanian, M., Ganesan, S. M., Chatterjee, S., Pielichowska, K., Kandaswamy, R., & Pamuła, E. (2024) · Molecules · doi:10.3390/molecules29163826 · Cited by 7
Calderón‐Villajos, R., Vázquez‐López, A., Jiménez‐Suárez, A., Sánchez–Romate, X. F., & Prolongo, S. G. (2025) · Polymer Composites · doi:10.1002/pc.29466 · Cited by 7
Liu, G., Zhao, Y., Zhang, L., Guo, M., Li, G., & Liao, X. (2025) · Polymer · doi:10.1016/j.polymer.2025.128127 · Cited by 7
Self-citationPhotoswitches in Order: One-Pot Synthesis of Azobenzene Main-Chain and Segmented Copolymers
Rossi, R., Martella, D., Parmeggiani, C., Hirschmann, M., & Fuoco, T. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.3c02849 · Cited by 7
Mandlule, A., Liu, Y., Schwanz, S., Pieper, Y., Scharf, H., Iskhakova, K., Conceição, A. L. C., Wieland, D. C. F., Zeller-Plumhoff, B., Toma, F. M., et al. (2026) · Materials Advances · doi:10.1039/d5ma00886g · Cited by 6
Seo, J. H., Won, D., Lee, H., Bang, S., Kang, H. S., Gwon, J. Y., Moon, C. H., Kim, J. W., Park, Y., Kang, M. W., et al. (2026) · Advanced Science · doi:10.1002/advs.202523965 · Cited by 12
Insights of mechanism and kinetics of acrylonitrile aqueous precipitation polymerization
Yan, H., Jiao, Y., Jin, B., Zhang, H., Fu, Z., Jia, S., & Deng, Y. (2024) · Journal of Macromolecular Science Part A · doi:10.1080/10601325.2024.2401535 · Cited by 6
Zhou, J., Takahashi, K., Nozaki, K., Yamamoto, Y., Katashima, T., Yoshie, N., & Nakagawa, S. (2024) · Macromolecules · doi:10.1021/acs.macromol.4c01250 · Cited by 6
Kyaw, Z. W., Opaprakasit, P., Polpanich, D., Sreearunothai, P., Elaïssari, A., & Kaewsaneha, C. (2024) · ACS Applied Bio Materials · doi:10.1021/acsabm.4c01125 · Cited by 6
Lorenzo, M. L. D., Liparoti, S., Cavallo, D., Hashemi, T., & Pantani, R. (2025) · International Journal of Polymer Science · doi:10.1155/ijps/9525001 · Cited by 6
Self-citationPhangkam, S., Kiatwuthinon, P., & Choochottiros, C. (2025) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5c00684 · Cited by 6
Mechanical, barrier, and photodegradation properties of biodegradable PLA-based blend films
Fernández‐Tena, A., Olmedo-Martínez, J. L., Sabino, M. A., Collinson, E., López, J. V., Irusta, L., González, A., de Ilarduya, A. M., Guerrica‐Echevarría, G., Aranburu, N., et al. (2025) · RSC Sustainability · doi:10.1039/d5su00454c · Cited by 6
Self-citationMelt memory in random ethylene-1-alkene copolymers
Shi, Y., Li, J., Li, H., Zhang, B., Christiansen, J. D. C., Yu, D., & Jiang, S. (2024) · Soft Matter · doi:10.1039/d4sm00225c · Cited by 6
Xu, H., Feng, A., Huang, Z., Tan, R., Wang, Z., Zhang, X., & Zhang, Z. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c00593 · Cited by 6
Tolbert, J. W., French, T., Kitson, A., Okpara, C., Hammerstone, D. E., Lazarte, S., Babuska, T. F., Gonzalez‐Fernandez, T., Krick, B. A., & Chow, L. W. (2024) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37674 · Cited by 6
Sha, X., Shi, Y., & Feng, J. (2024) · Materials Today Communications · doi:10.1016/j.mtcomm.2024.108743 · Cited by 6
The effect of entanglement concentration on the melt memory of polyethylene random copolymer
Wang, Z., Zeng, J., Liang, Y., Zhang, R., Zhu, C., Xu, J. Z., & Müller, A. J. (2025) · Polymer · doi:10.1016/j.polymer.2025.128576 · Cited by 5
Self-citationOrigin-Dependent Molecular Ordering in Gelatin and Its Impact on Electrospun Nanofiber
Yang, S. B., Lee, Y. K., & Kwon, D.-J. (2025) · Polymers · doi:10.3390/polym17162219 · Cited by 5
Ismail, S., Shamsabadi, A. A., Harris, J., Adams, T., Gulec, S., Brousseau, J.-L., Nejati, S., & Bavarian, M. (2025) · ACS Applied Polymer Materials · doi:10.1021/acsapm.5c02276 · Cited by 5
Boukrim, A., Boutriouia, E. H., Yachou, H. A., Ljubek, G., Assimi, T. E., Benhida, R., Talha, A., Kricheldorf, H. R., Youcef, H. B., Roković, M. K., et al. (2026) · European Polymer Journal · doi:10.1016/j.eurpolymj.2026.114664 · Cited by 4
Rath, A. P., Krishnan, P. S. G., & Kanny, K. M. (2024) · Polymers for Advanced Technologies · doi:10.1002/pat.6566 · Cited by 5
Yang, A., Yue, L., Shao, Y., Yang, Y., Wang, H., & Zou, G. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.57131 · Cited by 5
Self-nucleation effect in crystallization of Poly(propylene-co-ethylene-co-1-butene) terpolymers
Shao, P., Liu, X., Chen, Y., Pan, L., Li, Y., & Ma, Z. (2025) · Polymer · doi:10.1016/j.polymer.2025.128436 · Cited by 5
Zaccone, M., Vio, R., Baouch, Z., Cavallo, D., & Monti, M. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.57123 · Cited by 4
Self-citationAbumelha, H. M. A., Alessa, A. H., Althumayri, K., Alnoman, R. B., Alghasham, H. A., Alqarni, S. A., Alamoudi, W. M., & El‐Metwaly, N. M. (2024) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2024.139486 · Cited by 4
Cucoveica, O., Stadoleanu, C., Bertsch, C., Triaud, R., Condriuc, I. P., Atanase, L. I., & Delaite, C. (2024) · Polymers · doi:10.3390/polym16192748 · Cited by 4
Dadgari, N., Fotoukian, H., Nazarpak, M. H., & Solati‐Hashjin, M. (2025) · Journal of Biomaterials Applications · doi:10.1177/08853282241312285 · Cited by 4
Liu, G., Zhang, L., Zhao, Y., Guo, M., Li, G., & Liao, X. (2025) · Polymer · doi:10.1016/j.polymer.2025.128517 · Cited by 4
Self-citationYe, G., Yu, Y., Wu, C., Zhang, H., Zhao, Y., Bi, H., & Xu, C. (2025) · Industrial Crops and Products · doi:10.1016/j.indcrop.2025.121699 · Cited by 4
Chícharo, B., Fadlallah, S., Trapasso, G., Gherardi, T., Allais, F., & Aricò, F. (2024) · Green Chemistry · doi:10.1039/d4gc05132g · Cited by 4
A Comprehensive Review on Polycaprolactone: A Promising Polymer for Enhancing Drug Bioavailability
Dubey, S., Patel, S., Pradhan, M., Yadav, D. K., & Minz, S. (2025) · Polymer-Plastics Technology and Materials · doi:10.1080/25740881.2025.2499826 · Cited by 4
Chandler, A., Schofield, R. M., Mouthuy, P., & Assender, H. E. (2025) · ACS Applied Polymer Materials · doi:10.1021/acsapm.5c00907 · Cited by 5
Norinkevicius, K., Madsen, J., Christiansen, L. E., Meier, S., Hörner, A., Górecki, R., Regueira, T. B., & Daugaard, A. E. (2023) · Polymer Chemistry · doi:10.1039/d3py00442b · Cited by 4
Ryltseva, G. A., Dudaev, A. E., Lipaikin, S. Y., Ghorabe, F. D. E., Menzyanova, N. G., Ulasevich, S. A., Скорб, Е. В., Volova, T. G., & Shishatskaya, E. I. (2025) · Journal of Polymers and the Environment · doi:10.1007/s10924-025-03513-8 · Cited by 6
Tashiro, K., Oda, T., Mayumi, K., Ikeda, O., Koganezawa, T., Hommura, S., Okazoe, T., & Kawaguchi, D. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c01276 · Cited by 3
Buchatip, S., Supmak, W., Sangroniz, L., Opaprakasit, M., Petchsuk, A., Opaprakasit, P., & Müller, A. J. (2025) · ACS Omega · doi:10.1021/acsomega.5c03596 · Cited by 3
Self-citationMei, V., Schimmelpfennig, K., & Lewis, C. L. (2025) · Polymer · doi:10.1016/j.polymer.2025.128948 · Cited by 3
Boschetto, F., Zanocco, M., Kamei, K., Xu, H., & Marin, E. (2025) · Polymers · doi:10.3390/polym17223024 · Cited by 4
Polak, M., Neela, N. U. T. K., Berniak, K., Knapczyk‐Korczak, J., Marzec, M. M., & Stachewicz, U. (2025) · Macromolecular Bioscience · doi:10.1002/mabi.202500564 · Cited by 5
Electrospun Polycaprolactone/Carbon Nanotube Membranes for Transdermal Drug Delivery Systems
Ortiz, E., Martín‐Martínez, E. S., Gama-Castañeda, N. O., Pacheco, M., Figueroa‐López, U., Guevara‐Morales, A., Juárez, E., Ruíz, A., & Vieyra, H. (2025) · Polymers · doi:10.3390/polym18010015 · Cited by 3
Long Memory in Large Molecules: Self-Nucleation in Long-Chain Branched Polypropylene Melts
Gloger, D., Molnár, J., Salaberger, D., Tranchida, D., Gahleitner, M., Binder, W. H., & Androsch, R. (2026) · Macromolecules · doi:10.1021/acs.macromol.5c03344 · Cited by 3
Motloung, M. P., & Mochane, M. J. (2026) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-026-01631-y · Cited by 3
On the upcycling of PCL to produce building blocks for the development of PCL-PLA copolymers
Damonte, G., Dullaert, L., Pellis, A., Giribaldi, L., & Monticelli, O. (2026) · European Polymer Journal · doi:10.1016/j.eurpolymj.2026.114563 · Cited by 4
Varying the Oxidative Functionalization of Polypropylene Films under Quiescent Conditions
Das, S., Burkey, A. A., Tanveer, M. S., Mountziaris, I., Dolinski, N. D., Krishnamoorti, R., Robertson, M. L., & Kumar, S. K. (2026) · Macromolecules · doi:10.1021/acs.macromol.5c03413 · Cited by 4
Chen, S., Wang, Y., DONG, X., Xing, M., Mei, J., Qu, X., & Wang, F. (2026) · Journal of the American Chemical Society · doi:10.1021/jacs.5c20860 · Cited by 3
Influence of Molecular Weight on Functional Performance and Migration of PLA Food‐Contact Films
Moyadee, C., Chaloeijitkul, K., Wadaugsorn, K., & Sane, A. (2026) · Polymer Engineering and Science · doi:10.1002/pen.70510 · Cited by 3
Effect of melting survived nanocrystal on flow-induced crystallization of poly(l-lactic acid)
Zhou, Y., Lu, Y., Yu, H., Wang, B., Shen, C., Chen, J., & Zhang, B. (2024) · Polymer · doi:10.1016/j.polymer.2024.126792 · Cited by 3
Sangroniz, L., Fernández, M., Leone, G., & Cavallo, D. (2025) · Polymer · doi:10.1016/j.polymer.2025.129038 · Cited by 3
Self-citationYu, Q., Anuar, A., Miller, A., Abdullaeva, S., Jariyavidyanont, K., Petzold, A., Stürmer, S., Scheliga, F., Saalwächter, K., & Thurn‐Albrecht, T. (2025) · Polymer · doi:10.1016/j.polymer.2025.129131 · Cited by 3
Shiina, T., Ohkubo, T., McGehee, K., Inamasu, R., Arai, T., Sasaki, D., Sasaki, Y. C., & Mio, K. (2025) · Polymers · doi:10.3390/polym17030292 · Cited by 2
Metadata
- Authors
- Fernández-Tena, A., Pérez-Camargo, R. A., Coulembier, O., Sangroniz, L., Aranburu, N., Guerrica-Echevarria, G., Liu, G., Wang, D., Cavallo, D., & Müller, A. J.
- Affiliations
- POLYMAT and Department of Polymers and Advanced Materials: Physics, Chemistry and Technology, Faculty of Chemistry, University of the Basque Country UPV/EHU, Paseo Manuel de Lardizabal 3, 20018 Donostia-San Sebastián, Spain
- Beijing National Laboratory for Molecular Science, CAS Key Laboratory of Engineering Plastics, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190, China
- University of Mons (BE)
- University of the Basque Country (ES)
- Chinese Academy of Sciences (CN)
- University of Genoa (IT)
- Ikerbasque (ES)
- Corresponding author
- Müller, Alejandro J.
- ORCID
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2023-06-07
- Volume
- 56
- Issue
- 12
- Pages
- 4602-4620
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W4379618677
- Cited by
- 200
- References
- 71
- Citations by year
- 2026: 69 · 2025: 79 · 2024: 42 · 2023: 10
- FWCI
- 15.18
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Macromolecules (publishedVersion, cc-by)
- ORBi UMONS (submittedVersion, other-oa)
- Communities in ADDI (University of the Basque Country) (submittedVersion, cc-by)
- Hispana (submittedVersion, cc-by)
- CINECA IRIS Institutial Research Information System (University of Genoa) (submittedVersion)
- Funders
- Eusko Jaurlaritza (IT1503-22)
- Euskal Herriko Unibertsitatea
- National Natural Science Foundation of China (51820105005)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Foaming and Composites
- Keywords
- polycaprolactone, molecular weight effects, crystallization kinetics, self-nucleation, successive self-nucleation and annealing, spherulites, lamellar thickness, long period, chain folding, crystallinity, chain entanglement
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.