Printing Porous Carbon Aerogels for Low Temperature Supercapacitors
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Maintaining fast charging capability at low temperatures represents a significant challenge for supercapacitors. The performance of conventional porous carbon electrodes often deteriorates quickly with the decrease of temperature due to sluggish ion and charge transport. Here we fabricate a 3D-printed multiscale porous carbon aerogel (3D-MCA) via a unique combination of chemical methods and the direct ink writing technique. 3D-MCA has an open porous structure with a large surface area of ∼1750 m 2 g –1 . At −70 °C, the symmetric device achieves outstanding capacitance of 148.6 F g –1 at 5 mV s –1 . Significantly, it retains a capacitance of 71.4 F g –1 at a high scan rate of 200 mV s –1, which is 6.5 times higher than the non-3D printed MCA. These values rank among the best results reported for low temperature supercapacitors. These impressive results highlight the essential role of open porous structures for preserving capacitive performance at ultralow temperatures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Energy storage: The future enabled by nanomaterials
Pomerantseva, E., Bonaccorso, F., Feng, X., Cui, Y., & Gogotsi, Y. (2019) · Science · doi:10.1126/science.aan8285 · Cited by 1,927
All-temperature batteries enabled by fluorinated electrolytes with non-polar solvents
Fan, X., Ji, X., Chen, L., Chen, J., Deng, T., Han, F., Yue, J., Piao, N., Wang, R., Zhou, X., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0474-3 · Cited by 938
Elastic modulus of single cellulose microfibrils from tunicate measured by atomic force microscopy
Iwamoto, S., Kai, W., Isogai, A., & Iwata, T. (2009) · Biomacromolecules · doi:10.1021/bm900520n · Cited by 754
Research works printed but not linked: 43
- 10.1038/nenergy.2017.108 · DOI · Paper page
- 10.1038/s41563-020-0747-z · DOI · Paper page
- 10.1038/nature16502 · DOI · Paper page
- 10.1016/j.joule.2018.01.017 · DOI · Paper page
- 10.1126/science.aal4263 · DOI · Paper page
- 10.1016/j.jpowsour.2007.04.001 · DOI
- 10.1016/j.ensm.2019.04.033 · DOI · Paper page
- 10.1149/2.058206jes · DOI · Paper page
- 10.1016/j.nanoen.2012.11.006 · DOI · Paper page
- 10.1016/j.electacta.2016.03.113 · doi:10.1016/j.electacta.2016.03.113
- 10.1016/j.electacta.2015.12.097 · doi:10.1016/j.electacta.2015.12.097
- 10.1039/C7TA10474J · doi:10.1039/c7ta10474j
- 10.1002/cssc.201701957 · DOI
- 10.1021/jz201065t · DOI · Paper page
- 10.1016/j.elecom.2013.09.003 · DOI
- 10.1016/j.electacta.2013.03.147 · DOI · Paper page
- 10.1002/adma.201906652 · DOI · Paper page
- 10.1038/s41467-019-08644-w · DOI
- 10.1126/sciadv.aau6852 · DOI · Paper page
- 10.1021/acs.nanolett.7b00533 · DOI · Paper page
- 10.1039/C7TA05646J · DOI · Paper page
- 10.1016/j.joule.2018.09.020 · DOI · Paper page
- 10.1021/acs.nanolett.5b04965 · DOI · Paper page
- 10.1002/adma.201902725 · DOI · Paper page
- 10.1016/j.nantod.2017.06.007 · DOI · Paper page
- 10.1002/adma.201807313 · DOI · Paper page
- 10.1039/C7CS00790F · DOI · Paper page
- 10.1021/acs.chemrev.7b00627 · DOI · Paper page
- 10.1021/acs.chemrev.6b00225 · DOI · Paper page
- 10.1039/C8MH00603B · DOI · Paper page
- 10.1039/c2jm34066f · DOI · Paper page
- 10.1126/science.1200770 · DOI · Paper page
- 10.1021/acsnano.8b00304 · DOI · Paper page
- 10.1021/acsnano.9b08191 · DOI
- Flick E. W., 1998, Industrial solvents handbook
- 10.1039/C5CC03048J · DOI
- 10.1002/adfm.201102573 · DOI
- 10.1021/jp074464w · DOI · Paper page
- 10.1038/nmat4810 · DOI · Paper page
- 10.1021/acsnano.8b00621 · DOI
- 10.1021/jp970490q · DOI · Paper page
- 10.1007/s40820-019-0340-7 · DOI
- 10.1002/adma.201700214 · DOI · Paper page
Cited by
Three-Dimensional Printed MoS2/Graphene Aerogel Electrodes for Hydrogen Evolution Reactions
Chandrasekaran, S., Feaster, J., Ynzunza, J., Li, F., Wang, X., Nelson, A. J., & Worsley, M. A. (2022) · ACS Materials Au · doi:10.1021/acsmaterialsau.2c00014 · Cited by 38
Self-citation
Metadata
- Authors
- Yao, B., Peng, H., Zhang, H., Kang, J., Zhu, C., Delgado, G., Byrne, D., Faulkner, S., Freyman, M., Lu, X., Worsley, M. A., Lu, J. Q., & Li, Y.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-03-10
- Volume
- 21
- Issue
- 9
- Pages
- 3731-3737
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W3133561221
- Cited by
- 174
- References
- 3
- FWCI
- 7.52
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Funders
- U.S. Department of Energy (20-ERD-019, DE-AC52-07NA27344)
- National Aeronautics and Space Administration (NNX15AQ01A)
- University of California, Santa Cruz
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.