The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Piezoresistivity and Strain-induced Band Gap Tuning in Atomically Thin MoS2
Open accessAbstract
Continuous tuning of material properties is highly desirable for a wide range of applications, with strain engineering being an interesting way of achieving it. The tuning range, however, is limited in conventional bulk materials that can suffer from plasticity and low fracture limit due to the presence of defects and dislocations. Atomically thin membranes such as MoS2 on the other hand exhibit high Young's modulus and fracture strength, which makes them viable candidates for modifying their properties via strain. The bandgap of MoS2 is highly strain-tunable, which results in the modulation of its electrical conductivity and manifests itself as the piezoresistive effect, whereas a piezoelectric effect was also observed in odd-layered MoS2 with broken inversion symmetry. This coupling between electrical and mechanical properties makes MoS2 a very promising material for nanoelectromechanical systems (NEMS). Here, we incorporate monolayer, bilayer, and trilayer MoS2 in a nanoelectromechanical membrane configuration. We detect strain-induced band gap tuning via electrical conductivity measurements and demonstrate the emergence of the piezoresistive effect in MoS2. Finite element method (FEM) simulations are used to quantify the band gap change and to obtain a comprehensive picture of the spatially varying bandgap profile on the membrane. The piezoresistive gauge factor is calculated to be -148 ± 19, -224 ± 19, and -43.5 ± 11 for monolayer, bilayer, and trilayer MoS2, respectively, which is comparable to state-of-the-art silicon strain sensors and 2 orders of magnitude higher than in strain sensors based on suspended graphene. Controllable modulation of resistivity in 2D nanomaterials using strain-induced bandgap tuning offers a novel approach for implementing an important class of NEMS transducers, flexible and wearable electronics, tunable photovoltaics, and photodetection.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electronics and optoelectronics of two-dimensional transition metal dichalcogenides
Wang, Q. H., Kalantar-Zadeh, K., Kis, A., Coleman, J. N., & Strano, M. S. (2012) · Nature Nanotechnology · doi:10.1038/nnano.2012.193 · Cited by 16,374
Self-citationAtomically Thin MoS 2 : A New Direct-Gap Semiconductor
Mak, K. F., Lee, C., Hone, J., Shan, J., & Heinz, T. F. (2010) · Physical Review Letters · doi:10.1103/physrevlett.105.136805 · Cited by 15,586
Radisavljevic, B., Radenovic, A., Brivio, J., Giacometti, V., & Kis, A. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2010.279 · Cited by 14,939
Self-citationEmerging Photoluminescence in Monolayer MoS2
Splendiani, A., Sun, L., Zhang, Y., Li, T., Kim, J., Chim, C.-Y., Galli, G., & Wang, F. (2010) · Nano Letters · doi:10.1021/nl903868w · Cited by 9,501
Ultrasensitive photodetectors based on monolayer MoS2
Lopez-Sanchez, O., Lembke, D., Kayci, M., Radenovic, A., & Kis, A. (2013) · Nature Nanotechnology · doi:10.1038/nnano.2013.100 · Cited by 5,043
Self-citationCalibration of atomic-force microscope tips
Hutter, J. L., & Bechhoefer, J. (1993) · Review of Scientific Instruments · doi:10.1063/1.1143970 · Cited by 4,194
Silicon as a mechanical material
Petersen, K. E. (1982) · Proceedings of the IEEE · doi:10.1109/proc.1982.12331 · Cited by 2,902
Bandgap Engineering of Strained Monolayer and Bilayer MoS2
Conley, H. J., Wang, B., Ziegler, J. I., Haglund, R. F., Pantelides, S. T., & Bolotin, K. I. (2013) · Nano Letters · doi:10.1021/nl4014748 · Cited by 2,497
Piezoelectricity of single-atomic-layer MoS2 for energy conversion and piezotronics
Wu, W., Wang, L., Li, Y., Zhang, F., Lin, L., Niu, S., Chenet, D., Zhang, X., Hao, Y., Heinz, T. F., et al. (2014) · Nature · doi:10.1038/nature13792 · Cited by 2,287
Influence of quantum confinement on the electronic structure of the transition metal sulfideTS2
Kuc, A., Zibouche, N., & Heine, T. (2011) · Physical Review B · doi:10.1103/physrevb.83.245213 · Cited by 1,753
Cited by
2D transition metal dichalcogenides
Manzeli, S., Ovchinnikov, D., Pasquier, D., Yazyev, O. V., & Kis, A. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.33 · Cited by 6,075
Self-citationBandgap engineering of two-dimensional semiconductor materials
Chaves, A., Azadani, J. G., Alsalman, H., da Costa, D. R., Frisenda, R., Chaves, A. J., Song, S. H., Kim, Y. D., He, D., Zhou, J., et al. (2020) · npj 2D Materials and Applications · doi:10.1038/s41699-020-00162-4 · Cited by 1,296
Piezotronics and piezo-phototronics for adaptive electronics and optoelectronics
Wu, W., & Wang, Z. L. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.31 · Cited by 656
Band Gap Engineering with Ultralarge Biaxial Strains in Suspended Monolayer MoS2
Lloyd, D., Liu, X., Christopher, J. W., Cantley, L., Wadehra, A., Kim, B. L., Goldberg, B. B., Swan, A. K., & Bunch, J. S. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b02615 · Cited by 624
Insulators for 2D nanoelectronics: the gap to bridge
Illarionov, Y. Y., Knobloch, T., Jech, M., Lanza, M., Akinwande, D., Vexler, M. I., Mueller, T., Lemme, M. C., Fiori, G., Schwierz, F., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-16640-8 · Cited by 552
Mechanically Flexible Conductors for Stretchable and Wearable E‐Skin and E‐Textile Devices
Wang, B., & Facchetti, A. (2019) · Advanced Materials · doi:10.1002/adma.201901408 · Cited by 515
Strain engineering of two‐dimensional materials: Methods, properties, and applications
Yang, S., Chen, Y., & Jiang, C. (2021) · InfoMat · doi:10.1002/inf2.12177 · Cited by 504
Covalent Nitrogen Doping and Compressive Strain in MoS2 by Remote N2 Plasma Exposure
Azcatl, A., Qin, X., Prakash, A., Zhang, C., Cheng, L., Wang, Q., Lu, N., Kim, M. J., Kim, J., Cho, K., et al. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b01853 · Cited by 491
Flexible Molybdenum Disulfide (MoS2) Atomic Layers for Wearable Electronics and Optoelectronics
Singh, E., Singh, P., Kim, K. S., Yeom, G. Y., & Nalwa, H. S. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b19859 · Cited by 407
Novel structured transition metal dichalcogenide nanosheets
Zhang, X., Lai, Z., Ma, Q., & Zhang, H. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00094h · Cited by 386
Bolotsky, A., Butler, D., Dong, C., Gerace, K., Glavin, N. R., Muratore, C., Robinson, J. A., & Ebrahimi, A. (2019) · ACS Nano · doi:10.1021/acsnano.9b03632 · Cited by 381
Strain engineering in two-dimensional nanomaterials beyond graphene
Deng, S., Sumant, A. V., & Berry, V. (2018) · Nano Today · doi:10.1016/j.nantod.2018.07.001 · Cited by 369
Kulish, V. V., & Huang, W. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc02664a · Cited by 342
Thickness-modulated metal-to-semiconductor transformation in a transition metal dichalcogenide
Ciarrocchi, A., Avsar, A., Ovchinnikov, D., & Kis, A. (2018) · Nature Communications · doi:10.1038/s41467-018-03436-0 · Cited by 334
Self-citationYin, X., Tang, C. S., Zheng, Y., Gao, J., Wu, J., Zhang, H., Chhowalla, M., Chen, W., & Wee, A. T. S. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00236h · Cited by 329
Strain-engineered high-responsivity MoTe2 photodetector for silicon photonic integrated circuits
Maiti, R., Patil, C., Saadi, M. A. S. R., Xie, T., Azadani, J. G., Uluutku, B., Amin, R., Briggs, A. F., Miscuglio, M., Van Thourhout, D., et al. (2020) · Nature Photonics · doi:10.1038/s41566-020-0647-4 · Cited by 321
Mechanical and Electrical Anisotropy of Few-Layer Black Phosphorus
Tao, J., Shen, W., Wu, S., Liu, L., Feng, Z., Wang, C., Hu, C., Yao, P., Zhang, H., Pang, W., et al. (2015) · ACS Nano · doi:10.1021/acsnano.5b05151 · Cited by 315
Tunable Optical Properties of 2D Materials and Their Applications
Ma, Q., Ren, G., Xu, K., & Ou, J. Z. (2021) · Advanced Optical Materials · doi:10.1002/adom.202001313 · Cited by 269
All MoS2-Based Large Area, Skin-Attachable Active-Matrix Tactile Sensor
Park, Y. J., Sharma, B. K., Shinde, S. M., Kim, M.-S., Jang, B., Kim, J.-H., & Ahn, J.-H. (2019) · ACS Nano · doi:10.1021/acsnano.8b07995 · Cited by 259
Metadata
- Authors
- Manzeli, S., Allain, A., Ghadimi, A., & Kis, A.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-07-20
- Volume
- 15
- Issue
- 8
- Pages
- 5330-5335
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W1848153258
- Cited by
- 385
- References
- 38
- FWCI
- 9.33
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.