The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Boosting Potassium-Ion Battery Performance by Encapsulating Red Phosphorus in Free-Standing Nitrogen-Doped Porous Hollow Carbon Nanofibers
Abstract
Potassium-ion batteries (KIBs) are a promising alternative to lithium-ion batteries (LIBs) for large-scale renewable energy storage owning to the natural abundance and low cost of potassium. However, the biggest challenge for KIBs application lies in the lack of suitable electrode materials that can deliver long cycle life and high reversible capacity. In this work, we realized unprecedented long cycle life with high reversible capacity (465 mAh g –1 at 2 A g –1 after 800 cycles) as well as outstanding rate capability (342 mAh g –1 at 5 A g –1 ) for KIBs by embedding red P into free-standing nitrogen-doped porous hollow carbon nanofibers (red P@N-PHCNFs). This design circumvents the problems of pulverization and aggregation of P particles. The in situ transmission electron microscopy (TEM) investigation reveals the structural robustness of the composite fibers during potassiation. The formation of P–C chemical bonds as well as nitrogen doping in the carbon matrix can facilitate the sturdy contact and enhance the adsorption energy of P atoms evidenced by DFT results. In situ Raman and ex situ XRD demonstrate that the final discharge product of the red P@N-PHCNFs is K 4 P 3 .
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
Carbon Electrodes for K-Ion Batteries
Jian, Z., Luo, W., & Ji, X. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06809 · Cited by 1,866
Xu, Y., Zhang, C., Zhou, M., Fu, Q., Zhao, C., Wu, M., & Lei, Y. (2018) · Nature Communications · doi:10.1038/s41467-018-04190-z · Cited by 1,149
Komaba, S., Hasegawa, T., Dahbi, M., & Kubota, K. (2015) · Electrochemistry Communications · doi:10.1016/j.elecom.2015.09.002 · Cited by 1,104
Nickel Hexacyanoferrate Nanoparticle Electrodes For Aqueous Sodium and Potassium Ion Batteries
Wessells, C. D., Peddada, S. V., Huggins, R. A., & Cui, Y. (2011) · Nano Letters · doi:10.1021/nl203193q · Cited by 1,074
An Initial Review of the Status of Electrode Materials for Potassium‐Ion Batteries
Pramudita, J. C., Sehrawat, D., Goonetilleke, D., & Sharma, N. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602911 · Cited by 1,045
Hard Carbon Microspheres: Potassium‐Ion Anode Versus Sodium‐Ion Anode
Jian, Z., Xing, Z., Bommier, C., Li, Z., & Ji, X. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501874 · Cited by 985
Potassium Ion Batteries with Graphitic Materials
Luo, W., Wan, J., Ozdemir, B., Bao, W., Chen, Y., Dai, J., Lin, H., Xu, Y., Gu, F., Barone, V., et al. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b03667 · Cited by 929
Sun, J., Zheng, G., Lee, H.-W., Liu, N., Wang, H., Yao, H., Yang, W., & Cui, Y. (2014) · Nano Letters · doi:10.1021/nl501617j · Cited by 920
Phosphorus-Based Alloy Materials for Advanced Potassium-Ion Battery Anode
Zhang, W., Mao, J., Li, S., Chen, Z., & Guo, Z. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b12185 · Cited by 831
Recent Progress and Perspective in Electrode Materials for K‐Ion Batteries
Kim, H., Kim, J. C., Bianchini, M., Seo, D., Rodríguez-García, J., & Ceder, G. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201702384 · Cited by 737
Black Phosphorus and its Composite for Lithium Rechargeable Batteries
Park, C. ‐., & Sohn, H. ‐. (2007) · Advanced Materials · doi:10.1002/adma.200602592 · Cited by 719
Emerging Non-Aqueous Potassium-Ion Batteries: Challenges and Opportunities
Wu, X., Leonard, D. P., & Ji, X. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b01764 · Cited by 649
Li, W., Hu, S., Luo, X., Li, Z., Sun, X., Li, M., Liu, F., & Yu, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605820 · Cited by 536
Self-citationNon-Aqueous K-Ion Battery Based on Layered K0.3MnO2and Hard Carbon/Carbon Black
Vaalma, C., Giffin, G. A., Buchholz, D., & Passerini, S. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0921607jes · Cited by 408
Potassium‐Ion Battery Anode Materials Operating through the Alloying–Dealloying Reaction Mechanism
Sultana, I., Rahman, M. M., Chen, Y. I., & Glushenkov, A. M. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201703857 · Cited by 370
Bismuth Microparticles as Advanced Anodes for Potassium‐Ion Battery
Huang, J., Lin, X., Tan, H., & Zhang, B. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703496 · Cited by 364
Activated carbon from the graphite with increased rate capability for the potassium ion battery
Tai, Z., Zhang, Q., Liu, Y., Liu, H., & Dou, S. (2017) · Carbon · doi:10.1016/j.carbon.2017.07.041 · Cited by 300
Self-citationHigh capacity potassium-ion battery anodes based on black phosphorus
Sultana, I., Rahman, M. M., Ramireddy, T., Chen, Y., & Glushenkov, A. M. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02483e · Cited by 267
Low-Potential Sodium Insertion in a NASICON-Type Structure through the Ti(III)/Ti(II) Redox Couple
Senguttuvan, P., Rousse, G., Arroyo y de Dompablo, M. E., Vezin, H., Tarascon, J.-M., & Palacín, M. R. (2013) · Journal of the American Chemical Society · doi:10.1021/ja311044t · Cited by 252
Xiong, P., Bai, P., Tu, S., Cheng, M., Zhang, J., Sun, J., & Xu, Y. (2018) · Small · doi:10.1002/smll.201802140 · Cited by 226
Recent research progress in non-aqueous potassium-ion batteries
Zou, X., Xiong, P., Zhao, J., Hu, J., Liu, Z., & Xu, Y. (2017) · Phys. Chem. Chem. Phys. · doi:10.1039/c7cp03852f · Cited by 209
K2Ti4O9: A Promising Anode Material for Potassium Ion Batteries
Kishore, B., G, V., & Munichandraiah, N. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0421613jes · Cited by 178
Liu, D., Huang, X., Qu, D., Zheng, D., Wang, G., Harris, J., Si, J., Ding, T., Chen, J., & Qu, D. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.07.023 · Cited by 173
In-situ Raman spectroscopy mapping of Si based anode material lithiation
Yang, J., Kraytsberg, A., & Ein‐Eli, Y. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.02.044 · Cited by 53
In situ Raman spectroscopic analysis of the lithiation and sodiation of antimony microparticles
Drewett, N. E., Aldous, I. M., Zou, J., & Hardwick, L. J. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.07.030 · Cited by 43
Cited by
Rechargeable Batteries for Grid Scale Energy Storage
Zhu, Z., Jiang, T., Ali, M., Meng, Y., Jin, Y., Cui, Y., & Chen, W. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00289 · Cited by 1,769
Research Development on K-Ion Batteries
Hosaka, T., Kubota, K., Hameed, A. S., & Komaba, S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00463 · Cited by 1,346
Potassium-ion batteries: outlook on present and future technologies
Min, X., Xiao, J., Fang, M., Wang, W. (., Zhao, Y., Liu, Y., Abdelkader, A. M., Xi, K., Kumar, R. V., & Huang, Z. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02917c · Cited by 761
Recent Progress on the Alloy‐Based Anode for Sodium‐Ion Batteries and Potassium‐Ion Batteries
Song, K., Liu, C., Mi, L., Chou, S., Chen, W., & Shen, C. (2021) · Small · doi:10.1002/smll.201903194 · Cited by 450
Recent advances in rational design for high-performance potassium-ion batteries
Xu, Y., Du, Y., Chen, H., Chen, J., Ding, T., Sun, D., Kim, D. H., Lin, Z., & Zhou, X. (2024) · Chemical Society Reviews · doi:10.1039/d3cs00601h · Cited by 367
Metadata
- Authors
- Wu, Y., Hu, S., Xu, R., Wang, J., Peng, Z., Zhang, Q., & Yu, Y.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-01-10
- Volume
- 19
- Issue
- 2
- Pages
- 1351-1358
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W2909233265
- Cited by
- 283
- References
- 27
- FWCI
- 18.33
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.