The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Highly Efficient and Robust Nickel Phosphides as Bifunctional Electrocatalysts for Overall Water-Splitting
Abstract
To search for the efficient non-noble metal based and/or earth-abundant electrocatalysts for overall water-splitting is critical to promote the clean-energy technologies for hydrogen economy. Herein, we report nickel phosphide (NixPy) catalysts with the controllable phases as the efficient bifunctional catalysts for water electrolysis. The phases of NixPy were determined by the temperatures of the solid-phase reaction between the ultrathin Ni(OH)2 plates and NaH2PO2·H2O. The NixPy with the richest Ni5P4 phase synthesized at 325 °C (NixPy-325) delivered efficient and robust catalytic performance for hydrogen evolution reaction (HER) in the electrolytes with a wide pH range. The NixPy-325 catalysts also exhibited a remarkable performance for oxygen evolution reaction (OER) in a strong alkaline electrolyte (1.0 M KOH) due to the formation of surface NiOOH species. Furthermore, the bifunctional NixPy-325 catalysts enabled a highly performed overall water-splitting with ∼100% Faradaic efficiency in 1.0 M KOH electrolyte, in which a low applied external potential of 1.57 V led to a stabilized catalytic current density of 10 mA/cm(2) over 60 h.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Walter, M. G., Warren, E. L., McKone, J. R., Boettcher, S. W., Mi, Q., Santori, E. A., & Lewis, N. S. (2010) · Chemical Reviews · doi:10.1021/cr1002326 · Cited by 9,388
Benchmarking Heterogeneous Electrocatalysts for the Oxygen Evolution Reaction
McCrory, C. C. L., Jung, S., Peters, J. C., & Jaramillo, T. F. (2013) · Journal of the American Chemical Society · doi:10.1021/ja407115p · Cited by 7,026
Identification of Active Edge Sites for Electrochemical H 2 Evolution from MoS 2 Nanocatalysts
Jaramillo, T. F., Jørgensen, K. P., Bonde, J., Nielsen, J. H., Horch, S., & Chorkendorff, I. (2007) · Science · doi:10.1126/science.1141483 · Cited by 6,100
MoS 2 Nanoparticles Grown on Graphene: An Advanced Catalyst for the Hydrogen Evolution Reaction
Li, Y., Wang, H., Xie, L., Liang, Y., Hong, G., & Dai, H. (2011) · Journal of the American Chemical Society · doi:10.1021/ja201269b · Cited by 5,001
Alternative energy technologies
Dresselhaus, M. S., & Thomas, I. L. (2001) · Nature · doi:10.1038/35104599 · Cited by 4,894
Nanostructured Nickel Phosphide as an Electrocatalyst for the Hydrogen Evolution Reaction
Popczun, E. J., McKone, J. R., Read, C. G., Biacchi, A. J., Wiltrout, A. M., Lewis, N. S., & Schaak, R. E. (2013) · Journal of the American Chemical Society · doi:10.1021/ja403440e · Cited by 2,911
Enhanced catalytic activity in strained chemically exfoliated WS2 nanosheets for hydrogen evolution
Voiry, D., Yamaguchi, H., Li, J., Silva, R., Alves, D. C. B., Fujita, T., Chen, M., Asefa, T., Shenoy, V. B., Eda, G., et al. (2013) · Nature Materials · doi:10.1038/nmat3700 · Cited by 2,641
Self-citationWater photolysis at 12.3% efficiency via perovskite photovoltaics and Earth-abundant catalysts
Luo, J., Im, J.-H., Mayer, M. T., Schreier, M., Nazeeruddin, M. K., Park, N.-G., Tilley, S. D., Fan, H. J., & Grätzel, M. (2014) · Science · doi:10.1126/science.1258307 · Cited by 2,509
Tian, J., Liu, Q., Asiri, A. M., & Sun, X. (2014) · Journal of the American Chemical Society · doi:10.1021/ja503372r · Cited by 2,373
Jin, H., Wang, J., Su, D., Wei, Z., Pang, Z., & Wang, Y. (2015) · Journal of the American Chemical Society · doi:10.1021/ja5127165 · Cited by 1,765
Cited by
Anantharaj, S., Ede, S. R., Sakthikumar, K., Karthick, K., Mishra, S., & Kundu, S. (2016) · ACS Catalysis · doi:10.1021/acscatal.6b02479 · Cited by 2,503
Chatenet, M., Pollet, B. G., Dekel, D. R., Dionigi, F., Deseure, J., Millet, P., Braatz, R. D., Bazant, M. Z., Eikerling, M., Staffell, I., et al. (2022) · Chemical Society Reviews · doi:10.1039/d0cs01079k · Cited by 2,025
Luo, Y., Tang, L., Khan, U., Yu, Q., Cheng, H.-M., Zou, X., & Liu, B. (2019) · Nature Communications · doi:10.1038/s41467-018-07792-9 · Cited by 713
Zhang, H., Maijenburg, A. W., Li, X., Schweizer, S. L., & Wehrspohn, R. B. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003261 · Cited by 666
Improved water electrolysis using magnetic heating of FeC–Ni core–shell nanoparticles
Niether, C., Faure, S., Bordet, A., Deseure, J., Chatenet, M., Carrey, J., Chaudret, B., & Rouet, A. (2018) · Nature Energy · doi:10.1038/s41560-018-0132-1 · Cited by 499
Precious Metal Free Hydrogen Evolution Catalyst Design and Application
Feidenhans’l, A. A., Regmi, Y. N., Wei, C., Xia, D., Kibsgaard, J., & King, L. A. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00712 · Cited by 499
Menezes, P. W., Indra, A., Das, C., Walter, C., Göbel, C., Gutkin, V., Schmeiβer, D., & Driess, M. (2017) · ACS Catalysis · doi:10.1021/acscatal.6b02666 · Cited by 422
Parra-Puerto, A., Ng, K. L., Fahy, K., Goode, A. E., Ryan, M. P., & Kucernak, A. (2019) · ACS Catalysis · doi:10.1021/acscatal.9b03359 · Cited by 391
Engineering NiS/Ni2P Heterostructures for Efficient Electrocatalytic Water Splitting
Xiao, X., Huang, D., Fu, Y., Wen, M., Jiang, X., Lv, X., Li, M., Gao, L., Liu, S., Wang, M., et al. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b16430 · Cited by 371
Developments of Metal Phosphides as Efficient OER Precatalysts
Dutta, A., & Pradhan, N. (2017) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b02249 · Cited by 367
Shit, S., Chhetri, S., Jang, W., Murmu, N. C., Koo, H., Samanta, P., & Kuila, T. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b04223 · Cited by 357
2D/2D Heterojunctions for Catalysis
Su, J., Li, G., Li, X., & Chen, J. (2019) · Advanced Science · doi:10.1002/advs.201801702 · Cited by 353
Sun, H., Xu, X., Yan, Z., Chen, X., Cheng, F., Weiss, P. S., & Chen, J. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b03627 · Cited by 312
Synthesis and application of transition metal phosphides as electrocatalyst for water splitting
Su, J., Zhou, J., Wang, L., Liu, C., & Chen, Y. (2017) · Science Bulletin · doi:10.1016/j.scib.2016.12.011 · Cited by 278
Wang, J., Ji, L., Zuo, S., & Chen, Z. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700107 · Cited by 145
Wang, S., Xiong, L., Bi, J., Zhang, X., Yang, G., & Yang, S. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b07742 · Cited by 67
Xu, Q., Wang, P., Wan, L., Xu, Z., Sultana, M. Z., & Wang, B. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c01808 · Cited by 40
Yang, F., Kang, N., Yan, J., Wang, X., He, J., Huo, S., & Song, L. (2018) · Metals · doi:10.3390/met8050359 · Cited by 30
Nickel phosphide polymorphs with an active (001) surface as excellent catalysts for water splitting
Jung, C. S., Park, K., Lee, Y., Kwak, I. H., Kwon, I. S., Kim, J., Seo, J., Ahn, J.-P., & Park, J. (2019) · CrystEngComm · doi:10.1039/c8ce01884g · Cited by 23
Lai, S., Lv, C., Chen, S., Lu, P., She, X., Wan, L., Wang, H., Sun, J., Yang, D., & Zhao, X. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.152727 · Cited by 22
Metadata
- Authors
- Li, J., Li, J., Zhou, X., Xia, Z., Gao, W., Ma, Y., & Qu, Y.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-04-20
- Volume
- 8
- Issue
- 17
- Pages
- 10826-10834
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2322460172
- Cited by
- 240
- References
- 20
- FWCI
- 9.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.