Cited by 375

The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.

Vertically Aligned and Interconnected Boron Nitride Nanosheets for Advanced Flexible Nanocomposite Thermal Interface Materials

Chen, Jin, Huang, Xingyi, Sun, Bin, Wang, Yuxin, Zhu, Yingke, Jiang, Pingkai·2017·ACS Applied Materials & Interfaces

Open this paper in CoChat — free account

Abstract

The continuous evolution toward semiconductor technology in the "more-than-Moore" era and rapidly increasing power density of modern electronic devices call for advanced thermal interface materials (TIMs). Here, we report a novel strategy to construct flexible polymer nanocomposite TIMs for advanced thermal management applications. First, aligned polyvinyl alcohol (PVA) supported and interconnected 2D boron nitride nanosheets (BNNSs) composite fiber membranes were fabricated by electrospinning. Then, the nanocomposite TIMs were constructed by rolling the PVA/BNNS composite fiber membranes to form cylinders and subsequently vacuum-assisted impregnation of polydimethylsiloxane (PDMS) into the porous cylinders. The nanocomposite TIMs not only exhibit a superhigh through-plane thermal conductivity enhancement of about 10 times at a low BNNS loading of 15.6 vol % in comparison with the pristine PDMS but also show excellent electrical insulating property (i.e., high volume electrical resistivity). The outstanding thermal management capability of the nanocomposite TIMs was practically confirmed by capturing the surface temperature variations of a working LED chip integrated with the nanocomposite TIMs.

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

Integrity signals

Registry

Crossref · 10.1021/acsami.7b08061

Cites

50 of 50 references verified0 citation errors · 0 not checkable

Statistics

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Thermal conductivity of carbon nanotubes and their polymer nanocomposites: A review
Han, Z., & Fina, A. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.11.004 · Cited by 2,603
Flexible high-temperature dielectric materials from polymer nanocomposites
Li, Q., Chen, L., Gadinski, M. R., Zhang, S., Zhang, G., Li, H. U., Iagodkine, E., Haque, A., Chen, L.-Q., Jackson, T. N., et al. (2015) · Nature · doi:10.1038/nature14647 · Cited by 2,133
Thermal conductivity of polymer-based composites: Fundamentals and applications
Chen, H., Ginzburg, V. V., Yang, J., Yang, Y., Liu, W., Huang, Y., Du, L., & Chen, B. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.03.001 · Cited by 2,049
Effective thermal conductivity of particulate composites with interfacial thermal resistance
Nan, C.-W., Birringer, R., Clarke, D. R., & Gleiter, H. (1997) · Journal of Applied Physics · doi:10.1063/1.365209 · Cited by 2,009
Review of thermal conductivity in composites: Mechanisms, parameters and theory
Burger, N., Laachachi, A., Ferriol, M., Lutz, M., Toniazzo, V., & Ruch, D. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.05.001 · Cited by 1,357
Functionalized hexagonal boron nitride nanomaterials: emerging properties and applications
Weng, Q., Wang, X., Wang, X., Bando, Y., & Golberg, D. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00869g · Cited by 1,282
Ultralight nanofibre-assembled cellular aerogels with superelasticity and multifunctionality
Si, Y., Yu, J., Tang, X., Ge, J., & Ding, B. (2014) · Nature Communications · doi:10.1038/ncomms6802 · Cited by 1,148
Boron nitride colloidal solutions, ultralight aerogels and freestanding membranes through one-step exfoliation and functionalization
Lei, W., Mochalin, V. N., Liu, D., Qin, S., Gogotsi, Y., & Chen, Y. (2015) · Nature Communications · doi:10.1038/ncomms9849 · Cited by 861
Advances in three-dimensional nanofibrous macrostructures via electrospinning
Sun, B., Long, Y. Z., Zhang, H. D., Li, M. M., Duvail, J. L., Jiang, X. Y., & Yin, H. L. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.06.002 · Cited by 792
Self-citation
Cellulose Nanofiber Supported 3D Interconnected BN Nanosheets for Epoxy Nanocomposites with Ultrahigh Thermal Management Capability
Chen, J., Huang, X., Zhu, Y., & Jiang, P. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201604754 · Cited by 756
Self-citation
Highly thermally conductive and mechanically strong graphene fibers
Xin, G., Yao, T., Sun, H., Scott, S. M., Shao, D., Wang, G., & Lian, J. (2015) · Science · doi:10.1126/science.aaa6502 · Cited by 740
Superelastic and Superhydrophobic Nanofiber-Assembled Cellular Aerogels for Effective Separation of Oil/Water Emulsions
Si, Y., Fu, Q., Wang, X., Zhu, J., Yu, J., Sun, G., & Ding, B. (2015) · ACS Nano · doi:10.1021/nn506633b · Cited by 677
Theoretical and computational studies of carbon nanotube composites and suspensions: Electrical and thermal conductivity
Foygel, M., Morris, R. D., Anez, D., French, S., & Sobolev, V. L. (2005) · Physical Review B · doi:10.1103/physrevb.71.104201 · Cited by 655
Polyhedral Oligosilsesquioxane‐Modified Boron Nitride Nanotube Based Epoxy Nanocomposites: An Ideal Dielectric Material with High Thermal Conductivity
Huang, X., Zhi, C., Jiang, P., Golberg, D., Bando, Y., & Tanaka, T. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201201824 · Cited by 647
Self-citation
Solution-processed ferroelectric terpolymer nanocomposites with high breakdown strength and energy density utilizing boron nitride nanosheets
Li, Q., Zhang, G., Liu, F., Han, K., Gadinski, M. R., Xiong, C., & Wang, Q. (2014) · Energy & Environmental Science · doi:10.1039/c4ee02962c · Cited by 645
Ice‐Templated Assembly Strategy to Construct 3D Boron Nitride Nanosheet Networks in Polymer Composites for Thermal Conductivity Improvement
Zeng, X., Yao, Y., Gong, Z., Wang, F., Sun, R., Xu, J., & Wong, C. (2015) · Small · doi:10.1002/smll.201502173 · Cited by 618
Enhanced thermal conductivity of phase change materials with ultrathin-graphite foams for thermal energy storage
Ji, H., Sellan, D. P., Pettes, M. T., Kong, X., Ji, J., Shi, L., & Ruoff, R. S. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42573h · Cited by 592
Electro-spinning/netting: A strategy for the fabrication of three-dimensional polymer nano-fiber/nets
Wang, X., Ding, B., Sun, G., Wang, M., & Yu, J. (2013) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.05.001 · Cited by 533
A Combination of Boron Nitride Nanotubes and Cellulose Nanofibers for the Preparation of a Nanocomposite with High Thermal Conductivity
Zeng, X., Sun, J., Yao, Y., Sun, R., Xu, J.-B., & Wong, C.-P. (2017) · ACS Nano · doi:10.1021/acsnano.7b02359 · Cited by 523
Highly Thermally Conductive Papers with Percolative Layered Boron Nitride Nanosheets
Zhu, H., Li, Y., Fang, Z., Xu, J., Cao, F., Wan, J., Preston, C., Yang, B., & Hu, L. (2014) · ACS Nano · doi:10.1021/nn500134m · Cited by 493
Bioinspired Modification of h-BN for High Thermal Conductive Composite Films with Aligned Structure
Shen, H., Guo, J., Wang, H., Zhao, N., & Xu, J. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am507416y · Cited by 491
Magnetic Alignment of Hexagonal Boron Nitride Platelets in Polymer Matrix: Toward High Performance Anisotropic Polymer Composites for Electronic Encapsulation
Lin, Z., Liu, Y., Raghavan, S., Moon, K.-S., Sitaraman, S. K., & Wong, C.-P. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am401939z · Cited by 469
Fabrication of Highly Oriented Hexagonal Boron Nitride Nanosheet/Elastomer Nanocomposites with High Thermal Conductivity
Kuang, Z., Chen, Y., Lu, Y., Liu, L., Hu, S., Wen, S., Mao, Y., & Zhang, L. (2015) · Small · doi:10.1002/smll.201402569 · Cited by 345
Edge‐Hydroxylated Boron Nitride Nanosheets as an Effective Additive to Improve the Thermal Response of Hydrogels
Xiao, F., Naficy, S., Casillas, G., Khan, M. H., Katkus, T., Jiang, L., Liu, H., Li, H., & Huang, Z. (2015) · Advanced Materials · doi:10.1002/adma.201502803 · Cited by 288
Artificial nacre-like papers based on noncovalent functionalized boron nitride nanosheets with excellent mechanical and thermally conductive properties
Zeng, X., Ye, L., Yu, S., Li, H., Sun, R., Xu, J., & Wong, C.-P. (2015) · Nanoscale · doi:10.1039/c5nr00228a · Cited by 286
Ultrahigh Thermal Conductivity of Interface Materials by Silver‐Functionalized Carbon Nanotube Phonon Conduits
Suh, D., Moon, C. M., Kim, D., & Baik, S. (2016) · Advanced Materials · doi:10.1002/adma.201600642 · Cited by 278
Facile Exfoliation and Noncovalent Superacid Functionalization of Boron Nitride Nanosheets and Their Use for Highly Thermally Conductive and Electrically Insulating Polymer Nanocomposites
Morishita, T., & Okamoto, H. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b08404 · Cited by 257
An ice-templated assembly strategy to construct graphene oxide/boron nitride hybrid porous scaffolds in phase change materials with enhanced thermal conductivity and shape stability for light–thermal–electric energy conversion
Yang, J., Tang, L.-S., Bao, R.-Y., Bai, L., Liu, Z.-Y., Yang, W., Xie, B.-H., & Yang, M.-B. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta08454k · Cited by 255
Superhydrophobic Materials for Tunable Drug Release: Using Displacement of Air To Control Delivery Rates
Yohe, S. T., Colson, Y. L., & Grinstaff, M. W. (2012) · Journal of the American Chemical Society · doi:10.1021/ja211148a · Cited by 247
Multifunctional Cyanate Ester Nanocomposites Reinforced by Hexagonal Boron Nitride after Noncovalent Biomimetic Functionalization
Wu, H., & Kessler, M. R. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00147 · Cited by 212
3D Fiber‐Deposited Electrospun Integrated Scaffolds Enhance Cartilage Tissue Formation
Moroni, L., Schotel, R., Hamann, D., de Wijn, J. R., & van Blitterswijk, C. A. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200601158 · Cited by 205
High-Density 3D-Boron Nitride and 3D-Graphene for High-Performance Nano–Thermal Interface Material
Loeblein, M., Tsang, S. H., Pawlik, M., Phua, E. J. R., Yong, H., Zhang, X. W., Gan, C. L., & Teo, E. H. T. (2017) · ACS Nano · doi:10.1021/acsnano.6b08218 · Cited by 200
Novel photodriven composite phase change materials with bioinspired modification of BN for solar-thermal energy conversion and storage
Yang, J., Qi, G.-Q., Tang, L.-S., Bao, R.-Y., Bai, L., Liu, Z.-Y., Yang, W., Xie, B.-H., & Yang, M.-B. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta03733j · Cited by 199
Graphene-based thermoplastic composites and their application for LED thermal management
Cho, E.-C., Huang, J.-H., Li, C.-P., Chang-Jian, C.-W., Lee, K.-C., Hsiao, Y.-S., & Huang, J.-H. (2016) · Carbon · doi:10.1016/j.carbon.2016.01.097 · Cited by 187
An ultrathin high-performance heat spreader fabricated with hydroxylated boron nitride nanosheets
Fu, L., Wang, T., Yu, J., Dai, W., Sun, H., Liu, Z., Sun, R., Jiang, N., Yu, A., & Lin, C.-T. (2017) · 2D Materials · doi:10.1088/2053-1583/aa636e · Cited by 185
High-performance thermal interface materials consisting of vertically aligned graphene film and polymer
Zhang, Y.-F., Han, D., Zhao, Y.-H., & Bai, S.-L. (2016) · Carbon · doi:10.1016/j.carbon.2016.08.051 · Cited by 175
Self‐Junctioned Copper Nanofiber Transparent Flexible Conducting Film via Electrospinning and Electroplating
An, S., Jo, H. S., Kim, D., Lee, H. J., Ju, B., Al‐Deyab, S. S., Ahn, J., Qin, Y., Swihart, M. T., Yarin, A. L., et al. (2016) · Advanced Materials · doi:10.1002/adma.201506364 · Cited by 160
Highly Flexible and Self-Healable Thermal Interface Material Based on Boron Nitride Nanosheets and a Dual Cross-Linked Hydrogel
Jiang, H., Wang, Z., Geng, H., Song, X., Zeng, H., & Zhi, C. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b16195 · Cited by 134
Generation and transplantation of reprogrammed human neurons in the brain using 3D microtopographic scaffolds
Carlson, A. L., Bennett, N. K., Francis, N. L., Halikere, A., Clarke, S. G., Moore, J. C., Hart, R. P., Paradiso, K. G., Wernig, M., Kohn, J., et al. (2016) · Nature Communications · doi:10.1038/ncomms10862 · Cited by 131
Fabrication of Aligned Nanofiber Polymer Yarn Networks for Anisotropic Soft Tissue Scaffolds
Wu, S., Duan, B., Liu, P., Zhang, C., Qin, X., & Butcher, J. T. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b05199 · Cited by 130
Ternary Artificial Nacre Reinforced by Ultrathin Amorphous Alumina with Exceptional Mechanical Properties
Zhao, H., Yue, Y., Zhang, Y., Li, L., & Guo, L. (2016) · Advanced Materials · doi:10.1002/adma.201505511 · Cited by 122
Fabrication of oriented hBN scaffolds for thermal interface materials
Shen, H., Cai, C., Guo, J. K., Qian, Z., Zhao, N., & Xu, J. Z. (2016) · RSC Advances · doi:10.1039/c6ra00980h · Cited by 121
Fabrication of curled conducting polymer microfibrous arrays via a novel electrospinning method for stretchable strain sensors
Sun, B., Long, Y., Liu, S., Huang, Y., Ma, J., Zhang, H., Shen, G., & Xu, S. (2013) · Nanoscale · doi:10.1039/c3nr01832f · Cited by 115
Self-citation
Thermally conductive, dielectric PCM–boron nitride nanosheet composites for efficient electronic system thermal management
Yang, Z., Zhou, L., Luo, W. H., et al. (2016) · Nanoscale · doi:10.1039/c6nr07357c · Cited by 100
3D Bridged Carbon Nanoring/Graphene Hybrid Paper as a High‐Performance Lateral Heat Spreader
Zhang, J., Shi, G., Jiang, C., Ju, S., & Jiang, D. (2015) · Small · doi:10.1002/smll.201501878 · Cited by 97
Lightweight Triboelectric Nanogenerator for Energy Harvesting and Sensing Tiny Mechanical Motion
Li, T., Xu, Y., Willander, M., Xing, F., Cao, X., Wang, N., & Wang, Z. L. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201600279 · Cited by 86
Bioinspired Templating Synthesis of Metal–Polymer Hybrid Nanostructures within 3D Electrospun Nanofibers
Son, H. Y., Ryu, J. H., Lee, H., & Nam, Y. S. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am401550p · Cited by 73
Highly deformable thermal interface materials enabled by covalently-bonded carbon nanotubes
Wang, H., Tazebay, A. S., Yang, G. Q., Lin, H. T., Choi, W., & Yu, C. (2016) · Carbon · doi:10.1016/j.carbon.2016.05.017 · Cited by 61
A highly thermally conductive electrode for lithium ion batteries
Zhao, B., Jiang, L., Zeng, X., et al. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta04774b · Cited by 42
Self-assembled block copolymer micelles with silver-carbon nanotube hybrid fillers for high performance thermal conduction.
Choi, J. R., Yu, S.-G., Jung, H., Hwang, S. K., Kim, R. H., Song, G., Cho, S., Bae, I., Hong, S., Koo, C., et al. (2015) · Nanoscale · doi:10.1039/c4nr06390b · Cited by 15

A high performance wearable strain sensor with advanced thermal management for motion monitoring
Tan, C., Dong, Z., Li, Y., Zhao, H., Huang, X., Zhou, Z., Jiang, J.-W., Long, Y.-Z., Jiang, P., Zhang, T.-Y., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-17301-6 · Cited by 580
Self-citation
Construction of 3D Skeleton for Polymer Composites Achieving a High Thermal Conductivity
Yao, Y., Sun, J., Zeng, X., Sun, R., Xu, J., & Wong, C. (2018) · Small · doi:10.1002/smll.201704044 · Cited by 389
Strategies for enhancing thermal conductivity of polymer-based thermal interface materials: a review
Ma, H., Gao, B., Wang, M., Yuan, Z., Shen, J., Zhao, J., & Feng, Y. (2021) · Journal of Materials Science · doi:10.1007/s10853-020-05279-x · Cited by 299
Photodriven Shape-Stabilized Phase Change Materials with Optimized Thermal Conductivity by Tailoring the Microstructure of Hierarchically Ordered Hybrid Porous Scaffolds
Yang, J., Tang, L.-S., Bai, L., Bao, R.-Y., Liu, Z., Xie, B.-H., Yang, M.-B., & Yang, W. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b00565 · Cited by 105

See all 375

Authors: Chen, J., Huang, X., Sun, B., Wang, Y., Zhu, Y., & Jiang, P.
Venue: ACS Applied Materials & Interfaces
Publisher: American Chemical Society (ACS)
Published: 2017-08-29
Volume: 9
Issue: 36
Pages: 30909-30917
ISSN: 1944-8244 (ISSN-L)
1944-8252
DOI: 10.1021/acsami.7b08061
OpenAlex: W2749394579
Cited by: 375
References: 50
FWCI: 13.44
Type: journal article
Language: en
Open access: closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.

Vertically Aligned and Interconnected Boron Nitride Nanosheets for Advanced Flexible Nanocomposite Thermal Interface Materials

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Self-check

Citations

Cites

Cited by

Metadata

Record

About these checks

Data sources