Zoom in Catalyst/Ionomer Interface in Polymer Electrolyte Membrane Fuel Cell Electrodes: Impact of Catalyst/Ionomer Dispersion Media/Solvent
Open accessThe DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Abstract
Large-scale applications of polymer electrolyte membrane fuel cells (PEMFCs) are throttled primarily by high initial cost and durability issues of the electrodes, which essentially consist of the nanoparticulate catalysts (e.g., Pt) having accessibility to electrons (e – ), protons (H + ), and fuel/oxidant through catalyst support, polymer electrolyte ionomer, and porous gas diffusion layer, respectively. Hence, to achieve high electrode performance in terms of activity and/or durability, understanding and optimization of the catalyst/support and catalyst/ionomer interfaces are of significant importance. Present study demonstrates an alternative route to inspect the catalyst/ionomer interface through an accelerated stress test combined with electrochemical impedance spectroscopy. Various interfaces are created through catalyst inks prepared using commercial Pt/C catalyst powder dispersed in different solvents. Electrode degradation pattern turns out to be a very useful tool to interpret a catalyst/ionomer interface structure. Variations of interfacial impedance, electrochemical surface area (ECSA), and double layer capacitance with the number of potential cycles suggested significant impact of catalyst/ionomer interface on the catalyst performance. A quantification of the degradation mechanisms responsible for ECSA loss during AST was employed to further understand the correlations between the electrochemical performance of the electrodes and their catalyst/ionomer interface structures. The knowledge may be implied to further optimize the electrode structure and hence to advance the PEMFC technology.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Furthermore, the ionomer conformation will influence the interface between ionomer and catalyst, including the coverage of ionomer on carbon or Pt, the thickness of ionomer film, and the interaction between ionomer and Pt [22,60].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [22]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The size distribution of aggregates (containing both the ionomer and catalyst), as well as the stability and viscosity in catalyst ink, significantly depends on the quality of the dispersion solvent (Fig. 14a).”
From Recent Advances on PEM Fuel Cells: From Key Materials to Membrane Electrode Assembly (2023) · cites this paper as [173]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“The solvent in the catalyst ink tailors the micro/nanostructure of the catalyst/ionomer interfaces [173].”
From Recent Advances on PEM Fuel Cells: From Key Materials to Membrane Electrode Assembly (2023) · cites this paper as [173]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrocatalyst approaches and challenges for automotive fuel cells
Debe, M. K. (2012) · Nature · doi:10.1038/nature11115 · Cited by 5,885
Recent Advances in Electrocatalysts for Oxygen Reduction Reaction
Shao, M., Chang, Q., Dodelet, J.-P., & Chenitz, R. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00462 · Cited by 3,903
Understanding Catalytic Activity Trends in the Oxygen Reduction Reaction
Kulkarni, A., Siahrostami, S., Patel, A., & Nørskov, J. K. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00488 · Cited by 2,742
A review of PEM fuel cell durability: Degradation mechanisms and mitigation strategies
Wu, J., Yuan, X. Z., Martin, J. J., Wang, H., Zhang, J., Shen, J., Wu, S., & Merida, W. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.06.006 · Cited by 1,587
Litster, S., & McLean, G. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.12.055 · Cited by 1,275
Sui, S., Wang, X., Zhou, X., Su, Y., Riffat, S., & Liu, C.-J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta08580f · Cited by 916
A review of platinum-based catalyst layer degradation in proton exchange membrane fuel cells
Zhang, S., Yuan, X.-Z., Hin, J. N. C., Wang, H., Friedrich, K. A., & Schulze, M. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.06.073 · Cited by 661
Degradation Mechanisms of Pt/C Fuel Cell Catalysts under Simulated Start–Stop Conditions
Meier, J. C., Galeano, C., Katsounaros, I., Topalov, A. A., Kostka, A., Schüth, F., & Mayrhofer, K. J. J. (2012) · ACS Catalysis · doi:10.1021/cs300024h · Cited by 586
Fuel Cell Catalyst Layers: A Polymer Science Perspective
Holdcroft, S. (2014) · Chemistry of Materials · doi:10.1021/cm401445h · Cited by 481
Effect of carbon black support corrosion on the durability of Pt/C catalyst
Wang, J., Yin, G., Shao, Y., Zhang, S., Wang, Z., & Gao, Y. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.06.084 · Cited by 441
Castanheira, L., Silva, W. O., Lima, F. H. B., Crisci, A., Dubau, L., & Maillard, F. (2015) · ACS Catalysis · doi:10.1021/cs501973j · Cited by 429
Dissolution of Platinum: Limits for the Deployment of Electrochemical Energy Conversion?
Topalov, A. A., Katsounaros, I., Auinger, M., Cherevko, S., Meier, J. C., Klemm, S. O., & Mayrhofer, K. J. J. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201207256 · Cited by 428
The recent progress and future of oxygen reduction reaction catalysis: A review
Stacy, J., Regmi, Y. N., Leonard, B., & Fan, M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.09.135 · Cited by 410
Three-dimensional analysis of Nafion layers in fuel cell electrodes
Lopez-Haro, M., Guétaz, L., Printemps, T., Morin, A., Escribano, S., Jouneau, P.-H., Bayle-Guillemaud, P., Chandezon, F., & Gebel, G. (2014) · Nature Communications · doi:10.1038/ncomms6229 · Cited by 402
Dubau, L., Castanheira, L., Maillard, F., Chatenet, M., Lottin, O., Maranzana, G., Dillet, J., Lamibrac, A., Perrin, J., Moukheiber, E., et al. (2014) · WIREs Energy and Environment · doi:10.1002/wene.113 · Cited by 349
Yu, Y., Li, H., Wang, H., Yuan, X.-Z., Wang, G., & Pan, M. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.01.059 · Cited by 313
Castanheira, L., Dubau, L., Mermoux, M., Berthomé, G., Caqué, N., Rossinot, E., Chatenet, M., & Maillard, F. (2014) · ACS Catalysis · doi:10.1021/cs500449q · Cited by 280
XPS investigation of Nafion® membrane degradation
Chen, C., Levitin, G., Hess, D. W., & Fuller, T. F. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.03.037 · Cited by 278
Giacomello, A., Meloni, S., Chinappi, M., & Casciola, C. M. (2012) · Langmuir · doi:10.1021/la3018453 · Cited by 243
Singh, R. K., Devivaraprasad, R., Kar, T., Chakraborty, A., & Neergat, M. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0141506jes · Cited by 216
O’Hayre, R., Barnett, D. M., & Prinz, F. B. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1851054 · Cited by 211
Bondarenko, A. S., Stephens, I. E. L., Hansen, H. A., Pérez-Alonso, F. J., Tripkovic, V., Johansson, T. P., Rossmeisl, J., Nørskov, J. K., & Chorkendorff, I. (2011) · Langmuir · doi:10.1021/la1042475 · Cited by 207
Shin, S.-J., Lee, J.-K., Ha, H.-Y., Hong, S.-A., Chun, H.-S., & Oh, I.-H. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(01)01045-x · Cited by 205
Characteristics of Self-Assembled Ultrathin Nafion Films
Paul, D. K., Karan, K., Docoslis, A., Giorgi, J. B., & Pearce, J. (2013) · Macromolecules · doi:10.1021/ma4002319 · Cited by 173
Takahashi, S., Mashio, T., Horibe, N., Akizuki, K., & Ohma, A. (2015) · ChemElectroChem · doi:10.1002/celc.201500131 · Cited by 143
Catalyst layer in PEMFC electrodes—Fabrication, characterisation and analysis
Rajalakshmi, N., & Dhathathreyan, K. S. (2006) · Chemical Engineering Journal · doi:10.1016/j.cej.2006.10.035 · Cited by 131
Doo, G., Lee, J. H., Yuk, S., Choi, S., Lee, D.-H., Lee, D. W., Kim, H. G., Kwon, S. H., Lee, S. G., & Kim, H.-T. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b01751 · Cited by 126
Bandarenka, A. S. (2013) · The Analyst · doi:10.1039/c3an00791j · Cited by 124
19F NMR studies of Nafion™ ionomer adsorption on PEMFC catalysts and supporting carbons
MA, S., CHEN, Q., JOGENSEN, F., Stein, P. C., & Skou, E. M. (2007) · Solid State Ionics · doi:10.1016/j.ssi.2007.10.007 · Cited by 119
Platinum Dissolution and Redeposition from Pt/C Fuel Cell Electrocatalyst at Potential Cycling
Pavlišič, A., Jovanovič, P., Šelih, V. S., Šala, M., Hodnik, N., & Gaberšček, M. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0191806jes · Cited by 112
Aricò, A. S., Cretı̀, P., Antonucci, P. L., Cho, J., Kim, H., & Antonucci, V (1998) · Electrochimica Acta · doi:10.1016/s0013-4686(98)00130-3 · Cited by 103
Sharma, R., & Andersen, S. M. (2018) · ACS Catalysis · doi:10.1021/acscatal.8b00002 · Cited by 103
Self-citationMyers, D. J., Wang, X., Smith, M. C., & More, K. L. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0211806jes · Cited by 84
Challenges in Automotive Fuel Cells Recycling
Wittstock, R., Pehlken, A., & Wark, M. (2016) · Recycling · doi:10.3390/recycling1030343 · Cited by 80
Highly durable fuel cell electrodes based on ionomers dispersed in glycerol
Kim, Y. S., Welch, C. F., Mack, N. H., Hjelm, R. P., Orler, E. B., Hawley, M. E., Lee, K. S., Yim, S.-D., & Johnston, C. M. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c4cp00496e · Cited by 75
In Situ ATR-FTIR Analysis of the Structure of Nafion–Pt/C and Nafion–Pt3Co/C Interfaces in Fuel Cell
Hanawa, H., Kunimatsu, K., Watanabe, M., & Uchida, H. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp306955q · Cited by 74
Preparation of PEMFC Electrodes from Milligram-Amounts of Catalyst Powder
Yarlagadda, V., McKinney, S. E., Keary, C. L., Thompson, L. T., Zulevi, B., & Kongkanand, A. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1461707jes · Cited by 69
Andersen, S. M. (2015) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2015.07.049 · Cited by 61
Self-citationAndersen, S. M., & Grahl-Madsen, L. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.11.101 · Cited by 61
Self-citationUchida, H., Song, J. M., Suzuki, S., Nakazawa, E., Baba, N., & Watanabe, M. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp062678s · Cited by 57
Catalyst-Layer Ionomer Imaging of Fuel Cells
Guétaz, L., López‐Haro, M., Escribano, S., Morin, A., Gebel, G., Cullen, D. A., More, K. L., & Borup, R. L. (2015) · ECS Transactions · doi:10.1149/06917.0455ecst · Cited by 54
Marquis, J. A., & Coppens, M. (2013) · Chemical Engineering Science · doi:10.1016/j.ces.2013.08.003 · Cited by 52
Evaluation of the Corrosion Resistance of Carbons for Use as PEM Fuel Cell Cathode Supports
Forouzandeh, F., Li, X., Banham, D., Feng, F., Ye, S., & Birss, V. I. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0381512jes · Cited by 47
Operando Raman Micro-Spectroscopy of Polymer Electrolyte Fuel Cells
Kendrick, I., Fore, J. L., Doan, J., Loupe, N., Vong, A., Dimakis, N., Diem, M., & Smotkin, E. S. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0211604jes · Cited by 35
Sharma, R., & Kar, K. K. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.01.046 · Cited by 31
Self-citationAndersen, S. M., Dhiman, R., & Skou, E. M. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.02.004 · Cited by 28
Self-citationChemistry of carbon polymer composite electrode – An X-ray photoelectron spectroscopy study
Andersen, S. M., Dhiman, R., & Skou, E. M. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.10.162 · Cited by 26
Self-citationPEM Fuel Cell Catalysts: The Importance of Catalyst Support
Ye, S., Hall, M., & He, P. (2008) · ECS Transactions · doi:10.1149/1.2982050 · Cited by 24
Kinetic effect of the ionomer on the oxygen reduction in carbon-supported Pt electrocatalysts
Velázquez‐Palenzuela, A., Centellas, F., Brillas, E., Arias, C., Rodrı́guez, R. M., Garrido, J. A., & Cabot, P. L. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.09.090 · Cited by 17
Cited by
Recent Advances on PEM Fuel Cells: From Key Materials to Membrane Electrode Assembly
Mo, S., Du, L., Huang, Z., Chen, J., Zhou, Y., Wu, P., Meng, L., Wang, N., Xing, L., Zhao, M., et al. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-023-00190-w · Cited by 277
“The solvent in the catalyst ink tailors the micro/nanostructure of the catalyst/ionomer interfaces [173].”
Kim, Y. J., Lim, A., Kim, J. M., Lim, D., Chae, K. H., Cho, E. N., Han, H. J., Jeon, K. U., Kim, M., Lee, G. H., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-18686-0 · Cited by 223
Emerging Electrochemical Processes to Decarbonize the Chemical Industry
Xia, R., Overa, S., & Jiao, F. (2022) · JACS Au · doi:10.1021/jacsau.2c00138 · Cited by 185
The Controllable Design of Catalyst Inks to Enhance PEMFC Performance: A Review
Guo, Y., Pan, F., Chen, W., Ding, Z., Yang, D., Li, B., Ming, P., & Zhang, C. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-020-00083-2 · Cited by 175
“Ionomers can also be adsorbed onto catalyst/support aggregates to result in ionomer agglomeration regions in inks [110, 154], which can lead to ink instability and membrane electrode performance decreases.”
BackgroundInfluentialAcid anion electrolyte effects on platinum for oxygen and hydrogen electrocatalysis
Kamat, G. A., Zeledon, J. A. Z., Gunasooriya, G. T. K. K., Dull, S. M., Perryman, J. T., Nørskov, J. K., Stevens, M. B., & Jaramillo, T. F. (2022) · Communications Chemistry · doi:10.1038/s42004-022-00635-1 · Cited by 176
Metadata
- Authors
- Sharma, R., & Andersen, S. M.
- Affiliations
- University of Southern Denmark (DK)
- Corresponding author
- Sharma, Raghunandan
- Andersen, Shuang Ma
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-10-15
- Volume
- 10
- Issue
- 44
- Pages
- 38125-38133
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2897097415
- Cited by
- 73
- References
- 50
- Citations by year
- 2026: 4 · 2025: 14 · 2024: 7 · 2023: 14 · 2022: 12 · 2021: 6 · 2020: 11 · 2019: 5
- FWCI
- 2.11
- Type
- journal article
- Language
- en
- Open access
- Licence
- other-oa
- Locations
- ACS Applied Materials & Interfaces (publishedVersion)
- PubMed (publishedVersion)
- University of Southern Denmark Research Portal (University of Southern Denmark) (submittedVersion, other-oa)
- Funders
- Villum Fonden
- Innovationsfonden (2015-1-12315)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
- Keywords
- proton exchange membrane fuel cells, platinum catalysts, dispersion medium, solvent effects, electrode degradation, accelerated stress testing, electrochemically active surface area, double-layer capacitance, interfacial impedance, catalyst stability
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.