Zoom in Catalyst/Ionomer Interface in Polymer Electrolyte Membrane Fuel Cell Electrodes: Impact of Catalyst/Ionomer Dispersion Media/Solvent
Open accessThe DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Abstract
Large-scale applications of polymer electrolyte membrane fuel cells (PEMFCs) are throttled primarily by high initial cost and durability issues of the electrodes, which essentially consist of the nanoparticulate catalysts (e.g., Pt) having accessibility to electrons (e – ), protons (H + ), and fuel/oxidant through catalyst support, polymer electrolyte ionomer, and porous gas diffusion layer, respectively. Hence, to achieve high electrode performance in terms of activity and/or durability, understanding and optimization of the catalyst/support and catalyst/ionomer interfaces are of significant importance. Present study demonstrates an alternative route to inspect the catalyst/ionomer interface through an accelerated stress test combined with electrochemical impedance spectroscopy. Various interfaces are created through catalyst inks prepared using commercial Pt/C catalyst powder dispersed in different solvents. Electrode degradation pattern turns out to be a very useful tool to interpret a catalyst/ionomer interface structure. Variations of interfacial impedance, electrochemical surface area (ECSA), and double layer capacitance with the number of potential cycles suggested significant impact of catalyst/ionomer interface on the catalyst performance. A quantification of the degradation mechanisms responsible for ECSA loss during AST was employed to further understand the correlations between the electrochemical performance of the electrodes and their catalyst/ionomer interface structures. The knowledge may be implied to further optimize the electrode structure and hence to advance the PEMFC technology.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Furthermore, the ionomer conformation will influence the interface between ionomer and catalyst, including the coverage of ionomer on carbon or Pt, the thickness of ionomer film, and the interaction between ionomer and Pt [22,60].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [22]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The size distribution of aggregates (containing both the ionomer and catalyst), as well as the stability and viscosity in catalyst ink, significantly depends on the quality of the dispersion solvent (Fig. 14a).”
From Recent Advances on PEM Fuel Cells: From Key Materials to Membrane Electrode Assembly (2023) · cites this paper as [173]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“The solvent in the catalyst ink tailors the micro/nanostructure of the catalyst/ionomer interfaces [173].”
From Recent Advances on PEM Fuel Cells: From Key Materials to Membrane Electrode Assembly (2023) · cites this paper as [173]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrocatalyst approaches and challenges for automotive fuel cells
Debe, M. K. (2012) · Nature · doi:10.1038/nature11115 · Cited by 5,885
Recent Advances in Electrocatalysts for Oxygen Reduction Reaction
Shao, M., Chang, Q., Dodelet, J.-P., & Chenitz, R. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00462 · Cited by 3,903
Understanding Catalytic Activity Trends in the Oxygen Reduction Reaction
Kulkarni, A., Siahrostami, S., Patel, A., & Nørskov, J. K. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00488 · Cited by 2,742
A review of PEM fuel cell durability: Degradation mechanisms and mitigation strategies
Wu, J., Yuan, X. Z., Martin, J. J., Wang, H., Zhang, J., Shen, J., Wu, S., & Merida, W. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.06.006 · Cited by 1,587
Litster, S., & McLean, G. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.12.055 · Cited by 1,275
Sui, S., Wang, X., Zhou, X., Su, Y., Riffat, S., & Liu, C.-J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta08580f · Cited by 916
A review of platinum-based catalyst layer degradation in proton exchange membrane fuel cells
Zhang, S., Yuan, X.-Z., Hin, J. N. C., Wang, H., Friedrich, K. A., & Schulze, M. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.06.073 · Cited by 661
Degradation Mechanisms of Pt/C Fuel Cell Catalysts under Simulated Start–Stop Conditions
Meier, J. C., Galeano, C., Katsounaros, I., Topalov, A. A., Kostka, A., Schüth, F., & Mayrhofer, K. J. J. (2012) · ACS Catalysis · doi:10.1021/cs300024h · Cited by 586
Fuel Cell Catalyst Layers: A Polymer Science Perspective
Holdcroft, S. (2014) · Chemistry of Materials · doi:10.1021/cm401445h · Cited by 481
Cited by
Recent Advances on PEM Fuel Cells: From Key Materials to Membrane Electrode Assembly
Mo, S., Du, L., Huang, Z., Chen, J., Zhou, Y., Wu, P., Meng, L., Wang, N., Xing, L., Zhao, M., et al. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-023-00190-w · Cited by 277
“The solvent in the catalyst ink tailors the micro/nanostructure of the catalyst/ionomer interfaces [173].”
Kim, Y. J., Lim, A., Kim, J. M., Lim, D., Chae, K. H., Cho, E. N., Han, H. J., Jeon, K. U., Kim, M., Lee, G. H., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-18686-0 · Cited by 223
Emerging Electrochemical Processes to Decarbonize the Chemical Industry
Xia, R., Overa, S., & Jiao, F. (2022) · JACS Au · doi:10.1021/jacsau.2c00138 · Cited by 185
The Controllable Design of Catalyst Inks to Enhance PEMFC Performance: A Review
Guo, Y., Pan, F., Chen, W., Ding, Z., Yang, D., Li, B., Ming, P., & Zhang, C. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-020-00083-2 · Cited by 175
“Ionomers can also be adsorbed onto catalyst/support aggregates to result in ionomer agglomeration regions in inks [110, 154], which can lead to ink instability and membrane electrode performance decreases.”
BackgroundInfluentialAcid anion electrolyte effects on platinum for oxygen and hydrogen electrocatalysis
Kamat, G. A., Zeledon, J. A. Z., Gunasooriya, G. T. K. K., Dull, S. M., Perryman, J. T., Nørskov, J. K., Stevens, M. B., & Jaramillo, T. F. (2022) · Communications Chemistry · doi:10.1038/s42004-022-00635-1 · Cited by 176
Chen, D., Pei, P., Li, Y., Ren, P., Meng, Y., Song, X., & Wu, Z. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.115651 · Cited by 164
Impact of Catalyst Ink Dispersing Solvent on PEM Fuel Cell Performance and Durability
Lei, C., Yang, F., Macauley, N., Spinetta, M., Purdy, G., Jankovic, J., Cullen, D. A., More, K. L., Kim, Y. S., & Xu, H. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abf2b0 · Cited by 93
Stability of Platinum‐Group‐Metal‐Based Electrocatalysts in Proton Exchange Membrane Fuel Cells
Zhu, E., Wu, M., Xu, H., Peng, B., Liu, Z., Huang, Y., & Li, Y. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202203883 · Cited by 94
Liu, H., Ney, L., Zamel, N., & Li, X. (2022) · Applied Sciences · doi:10.3390/app12083776 · Cited by 85
Douglin, J. C., Zeledon, J. A. Z., Kreider, M. E., Singh, R. K., Stevens, M. B., Jaramillo, T. F., & Dekel, D. R. (2023) · Nature Energy · doi:10.1038/s41560-023-01385-7 · Cited by 81
“Usually GDEs in fuel cells and electrolysers are synthesized by spraying inks of powder-based catalysts with ionomeric materials 25,32 .”
MethodRen, H., Meng, X., Lin, Y., & Shao, Z. (2022) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2022.06.034 · Cited by 67
Hydrocarbon Ionomeric Binders for Fuel Cells and Electrolyzers
Kim, Y. S. (2023) · Advanced Science · doi:10.1002/advs.202303914 · Cited by 68
Structure and conductivity of ionomer in PEM fuel cell catalyst layers: a model-based analysis
Olbrich, W., Kadyk, T., Sauter, U., Eikerling, M. H., & Gostick, J. T. (2023) · Scientific Reports · doi:10.1038/s41598-023-40637-0 · Cited by 69
Influence of ionomer adsorption on agglomerate structures in high-solid catalyst inks
Kumano, N., Kudo, K., Akimoto, Y., Ishii, M., & Nakamura, H. (2020) · Carbon · doi:10.1016/j.carbon.2020.07.047 · Cited by 61
Harada, M., Takata, S.-I., Iwase, H., Kajiya, S., Kadoura, H., & Kanaya, T. (2021) · ACS Omega · doi:10.1021/acsomega.1c01535 · Cited by 57
The Dissolution Dilemma for Low Pt Loading Polymer Electrolyte Membrane Fuel Cell Catalysts
Sandbeck, D. J. S., Secher, N. M., Inaba, M., Quinson, J., Sørensen, J. E., Kibsgaard, J., Zana, A., Bizzotto, F., Speck, F. D., Paul, M. T. Y., et al. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abc767 · Cited by 56
Liu, P., Yang, D., Li, B., Zhang, C., & Ming, P. (2023) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2023.02.022 · Cited by 49
Yang, P., Huang, J., Li, J., Luo, K., Zhang, L., Fu, Q., Zhu, X., & Liao, Q. (2023) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2023.10.108 · Cited by 43
Sharma, R., Wang, Y., Li, F., Chamier, J., & Andersen, S. M. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b01336 · Cited by 41
Self-citationSharma, R., Andreasen, S. J., Chamier, J., & Andersen, S. M. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0671913jes · Cited by 40
Self-citationSharma, R., Gyergyek, S., Li, Q., & Andersen, S. M. (2019) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2019.02.052 · Cited by 42
Self-citationSun, F., Di, Q., Chen, M., Liu, H., & Wang, H. (2024) · eTransportation · doi:10.1016/j.etran.2024.100327 · Cited by 40
Sun, F., Liu, H., Chen, M., & Wang, H. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.232240 · Cited by 41
Deng, X., Ma, L., Wang, C., Ye, H., Cao, L., Zhan, X., Tian, J., & Tong, X. (2025) · Catalysts · doi:10.3390/catal15010074 · Cited by 36
Liu, C., Luo, M., Zeis, R., Chuang, P. A., Zhang, R., Du, S., & Sui, P. (2023) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2023.08.154 · Cited by 33
Sharma, R., Nielsen, K. R., Lund, P. B., Simonsen, S. B., Grahl‐Madsen, L., & Andersen, S. M. (2019) · ChemElectroChem · doi:10.1002/celc.201900846 · Cited by 34
Self-citationde Sousa, L. F., Harmoko, C., Benes, N. E., & Mul, G. (2021) · ACS ES&T Engineering · doi:10.1021/acsestengg.1c00228 · Cited by 31
Goswami, N., Mistry, A. N., Grunewald, J. B., Fuller, T. F., & Mukherjee, P. P. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab927c · Cited by 27
Choi, S.-G., Jeon, J., Chae, J., Yuk, S., Lee, D., Doo, G., Lee, D. W., Hyun, J., Kwen, J., Choi, S. Q., et al. (2021) · ACS Applied Energy Materials · doi:10.1021/acsaem.1c00379 · Cited by 26
Ren, H., Meng, X., Lin, Y., & Shao, Z. (2023) · Electrochimica Acta · doi:10.1016/j.electacta.2023.142710 · Cited by 25
Engineering membrane electrode assembly for advanced polymer electrolyte water electrolyzer
Liu, H., Kang, X., Zhao, T., Zhang, Z., Ge, S., Hu, S., Luo, Y., Yang, F., Li, S., Sun, C., et al. (2022) · Science China Materials · doi:10.1007/s40843-022-2128-4 · Cited by 21
Ansari, M. Z., Ansari, S. A., Parveen, N., Alam, M. W., & Umar, A. (2025) · Fuel · doi:10.1016/j.fuel.2025.136899 · Cited by 22
So, S., Kang, H., Choi, D., & Oh, K.-H. (2020) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2020.05.128 · Cited by 20
Ronovský, M., Pan, L., Klingenhof, M., Martens, I., Fusek, L., Kúš, P., Chattot, R., Mirolo, M., Dionigi, F., Burdett, H., et al. (2023) · ACS Applied Energy Materials · doi:10.1021/acsaem.3c01243 · Cited by 19
Min, J., Chougule, S. S., Sravani, B., Ko, K., Kim, Y., & Jung, N. (2023) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2023.101257 · Cited by 18
Dull, S. M., Xu, S., Goh, T., Lee, D. U., Higgins, D. C., Orazov, M., Koshy, D. M., Vullum, P. E., Kirsch, S., Hübner, G., et al. (2021) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2020.100297 · Cited by 18
Zhang, D., Ye, K., & Li, X. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c11463 · Cited by 16
Li, Y., Xiong, D., Liu, Y., Liu, M., Liu, J., Liang, C., Li, C., & Xu, J. (2019) · Nanotechnology Reviews · doi:10.1515/ntrev-2019-0044 · Cited by 16
Kräenbring, M., Wickert, L., Hansen, M., Sanden, S., Pellumbi, K., Wolf, J., Siegmund, D., Özcan, F., Apfel, U., & Segets, D. (2023) · ChemCatChem · doi:10.1002/cctc.202301273 · Cited by 15
Schüttoff, M., Wachtel, C., Schlumberger, R., Wilhelm, F., Scholta, J., & Hölzle, M. (2024) · Fuel Cells · doi:10.1002/fuce.202300263 · Cited by 16
Screen Printing Catalyst Inks With Enhanced Process Stability for PEM Fuel Cell Production
Ney, L., Seidl, N., Singh, R., Schneider, P., Stross, D., Göppentin, A., Tepner, S., Klingele, M., & Keding, R. J. (2024) · Fuel Cells · doi:10.1002/fuce.202400158 · Cited by 16
Pedram, S., Batool, M., Wang, Y., Bonville, L. J., & Janković, J. (2024) · Electrochimica Acta · doi:10.1016/j.electacta.2025.145841 · Cited by 13
Sharma, R., Morgen, P., & Andersen, S. M. (2020) · Physical Chemistry Chemical Physics · doi:10.1039/c9cp06066a · Cited by 13
Self-citationKhan, I. A., Morgen, P., Gyergyek, S., Sharma, R., & Andersen, S. M. (2023) · Applied Surface Science · doi:10.1016/j.apsusc.2023.158924 · Cited by 15
Self-citationRapid synchronous state-of-health diagnosis of membrane electrode assemblies in fuel cell stacks
Ren, P., Meng, Y., Pei, P., Fu, X., Chen, D., Li, Y., Zhu, Z., Zhang, L., & Wang, M. (2022) · Applied Energy · doi:10.1016/j.apenergy.2022.120297 · Cited by 12
Devivaraprasad, R., & Masuda, T. (2020) · Langmuir · doi:10.1021/acs.langmuir.0c02023 · Cited by 11
Dong, S. J., Yue, Z., Qian, H., Li, W., Xu, J., & Yang, H. (2020) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2019.12.153 · Cited by 10
Grebener, L., Odungat, A. S., Zhu, Y., Pasdag, O., Radev, I., Nürenberg, E., Kubina, A., Peinecke, V., Kohsakowski, S., Segets, D., et al. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.236457 · Cited by 12
Pei, Y., Zhu, W., Yue, R., Yao, J., Liu, X., Wang, L., Zhang, J., Yin, Y. S., & Guiver, M. D. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.232904 · Cited by 10
Zhang, D., Liu, W., Ye, K., & Li, X. (2023) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2023.09.076 · Cited by 10
Up-Scaled Preparation of Pt–Ni Aerogel Catalyst Layers for Polymer Electrolyte Fuel Cell Cathodes
Fikry, M., Weiß, N., Bozzetti, M., Ünsal, S., Georgi, M., Khavlyuk, P. D., Herranz, J. S., Tileli, V., Eychmüller, A., & Schmidt, T. J. (2024) · ACS Applied Energy Materials · doi:10.1021/acsaem.3c01930 · Cited by 9
Fernández-Alvarez, V. M., Malek, K., Eikerling, M. H., Young, A., Dutta, M., & Kjeang, E. (2025) · Electrochimica Acta · doi:10.1016/j.electacta.2025.146076 · Cited by 8
3D patterned electrodes for ultra-low platinum fuel cells
Yang, Y., Sun, R., & Elabd, Y. A. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.12.242 · Cited by 7
Zhang, P., Yang, D., Li, B., Ming, P., Yang, D., & Zhang, C. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.05.069 · Cited by 6
Electrically Controlled Ignition Performance of LiClO4/PVA/H2O Propellants
Li, Y., Na, X., Xia, Z.-X., & Ma, L. (2025) · Journal of Propulsion and Power · doi:10.2514/1.b39750 · Cited by 6
Sharma, R., Gyergyek, S., Morgen, P., & Andersen, S. M. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab6ff2 · Cited by 6
Self-citationZhao, X., Gao, S., Wang, S., Hou, T., Bao, Z., Guo, W. F., Deng, C., Kong, F., & Yin, G. (2025) · ACS Catalysis · doi:10.1021/acscatal.5c03319 · Cited by 5
Vu, T. H. T., Nguyen, M. D., & Ngoc, A. T. (2021) · Journal of Chemistry · doi:10.1155/2021/6649089 · Cited by 6
“On the other hand, the size of the catalyst-Nafion agglomerates is more affected by the solvent-Nafion bond than the solventcatalyst [23].”
BackgroundMaurya, R., Morgen, P., Sharma, R., & Andersen, S. M. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.236243 · Cited by 4
Self-citationComponent Optimization for Catalyst Layers in Proton Exchange Membrane Fuel Cells
Peng, J., Peng, J., Zhang, W., Zhang, X., Tao, P., Song, C., Shang, W., Deng, T., Zhang, W., Zhang, X., et al. (2020) · General Chemistry · doi:10.21127/yaoyigc2020200016 · Cited by 3
“[42] pointed out that solvents may affect the preference of ionomers in combination with catalyst nanoparticles or support.”
BackgroundVandenberghe, F. (2022) · theses.fr (ABES) · doi:10.70675/5725e890z5ddcz439dza8cbze5fab3c54d0d · Cited by 5
Gong, Z., Feng, Z., Tao, L., Chao, W., Chang, Z., & Zhao, P. (2025) · Fuel Cells · doi:10.1002/fuce.70015 · Cited by 2
“The dispersion characteristics of the catalyst and ionomer or their interface can be altered by means of the dispersion medium [5, 6], the sequence of ingredient mixing, or the dispersion process.”
Yang, D., Guo, Y., Zhang, Z., Wang, J., Zheng, W., Yang, D., Ming, P., & Li, B. (2026) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2026.154539 · Cited by 2
Components, principles, and design strategies of membrane electrode assembly
Yang, W. M., Zhou, Y., Zhang, L., & Li, J. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-24062-1.00005-x · Cited by 2
Chen, Y., Yang, D., Kang, J., Li, B., Yang, D., Ming, P., & Zhang, C. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.150679 · Cited by 2
Guo, J., Guo, J., Guo, K., & Wang, J. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4089540 · Cited by 1
The Role of Dispersion Solvent Composition in Pemfc Electrodes: Performance and Durability InsightsPreprint
Luo, S., Li, G., Zang, Z., Li, X., Wang, Q., Wang, Q., Xu, T., Xing, D., & Yi, B. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5081104
The Solvent Effect on Ionomer Self-Assembly: From Molecular Morphology to Catalyst Layer Performance
Yang, D., Chu, T., Guo, Y., Zhang, Z., Wang, J., Zheng, W., Yang, D., Ming, P., & Li, B. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c18925
Yang, D., Chu, T., Zhang, Z., Wang, J., zheng, W., Yang, D., Ming, P., & Li, B. (2026) · Journal of Power Sources · doi:10.1016/j.jpowsour.2026.239423
Akgül, G., Krause, B., Sharma, R., & Andersen, S. M. (2026) · International Journal of Electrochemical Science · doi:10.1016/j.ijoes.2026.101348
Self-citationMaurya, R., Morgen, P., Gyergyek, S., Karimi, V., Zhou, M., Li, N., Zhou, F., Liso, V., Sharma, R., & Andersen, S. M. (2026) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ae747a
Self-citationRole of initial Pt/C aggregate state in PEFC catalyst ink microstructure formation
Miskan, M., Tanaka, A., Sakuramoto, K., Nagato, K., & Tsujiguchi, T. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.180577
Metadata
- Authors
- Sharma, R., & Andersen, S. M.
- Affiliations
- University of Southern Denmark (DK)
- Corresponding author
- Sharma, Raghunandan
- Andersen, Shuang Ma
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-10-15
- Volume
- 10
- Issue
- 44
- Pages
- 38125-38133
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2897097415
- Cited by
- 73
- References
- 50
- Citations by year
- 2026: 4 · 2025: 14 · 2024: 7 · 2023: 14 · 2022: 12 · 2021: 6 · 2020: 11 · 2019: 5
- FWCI
- 2.11
- Type
- journal article
- Language
- en
- Open access
- Licence
- other-oa
- Locations
- ACS Applied Materials & Interfaces (publishedVersion)
- PubMed (publishedVersion)
- University of Southern Denmark Research Portal (University of Southern Denmark) (submittedVersion, other-oa)
- Funders
- Villum Fonden
- Innovationsfonden (2015-1-12315)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
- Keywords
- proton exchange membrane fuel cells, platinum catalysts, dispersion medium, solvent effects, electrode degradation, accelerated stress testing, electrochemically active surface area, double-layer capacitance, interfacial impedance, catalyst stability
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.