Dictating Pt-Based Electrocatalyst Performance in Polymer Electrolyte Fuel Cells, from Formulation to Application
The DOI matches its Crossref record; 69 of the 70 references it cites were found in a registry or an index.
Abstract
In situ electrochemical diagnostics designed to probe ionomer interactions with platinum and carbon were applied to relate ionomer coverage and conformation, gleaned from anion adsorption data, with O 2 transport resistance for low-loaded (0.05 mg Pt cm –2 ) platinum-supported Vulcan carbon (Pt/Vu)-based electrodes in a polymer electrolyte fuel cell. Coupling the in situ diagnostic data with ex situ characterization of catalyst inks and electrode structures, the effect of ink composition is explained by both ink-level interactions that dictate the electrode microstructure during fabrication and the resulting local ionomer distribution near catalyst sites. Electrochemical techniques (CO displacement and ac impedance) show that catalyst inks with higher water content increase ionomer (sulfonate) interactions with Pt sites without significantly affecting ionomer coverage on the carbon support. Surprisingly, the higher anion adsorption is shown to have a minor impact on specific activity, while exhibiting a complex relationship with oxygen transport. Ex situ characterization of ionomer suspensions and catalyst/ionomer inks indicates that the lower ionomer coverage can be correlated with the formation of large ionomer aggregates and weaker ionomer/catalyst interactions in low-water content inks. These larger ionomer aggregates resulted in increased local oxygen transport resistance, namely, through the ionomer film, and reduced performance at high current density. In the water-rich inks, the ionomer aggregate size decreases, while stronger ionomer/Pt interactions are observed. The reduced ionomer aggregation improves transport resistance through the ionomer film, while the increased adsorption leads to the emergence of resistance at the ionomer/Pt interface. Overall, the high current density performance is shown to be a nonmonotonic function of ink water content, scaling with the local gas (H 2, O 2 ) transport resistance resulting from pore, thin film, and interfacial phenomena.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Therefore, Pt/Vulcan has a more uniform ionomer coverage than Pt/Ketjen due to higher Pt surface density [53,59,60].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [60]
In the citing paper
“Furthermore, the ionomer conformation will influence the interface between ionomer and catalyst, including the coverage of ionomer on carbon or Pt, the thickness of ionomer film, and the interaction between ionomer and Pt [22,60].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [60]
In the citing paper
“These would affect the local gas transport resistance through the ionomer layer or the interfacial resistance between the ionomer film and Pt [60].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [60]
Citations
Cites
Intermolecular and Surface Forces
(2011) · Elsevier eBooks · doi:10.1016/c2011-0-05119-0 · Cited by 8,968
Highly Crystalline Multimetallic Nanoframes with Three-Dimensional Electrocatalytic Surfaces
Chen, C., Kang, Y., Huo, Z., Zhu, Z., Huang, W., Xin, H. L., Snyder, J. D., Li, D., Herron, J. A., Mavrikakis, M., et al. (2014) · Science · doi:10.1126/science.1249061 · Cited by 2,765
Self-citationNew Insights into Perfluorinated Sulfonic-Acid Ionomers
Kusoglu, A., & Weber, A. Z. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00159 · Cited by 2,432
Self-citationZeta Potential in Colloid Science
(1981) · Elsevier eBooks · doi:10.1016/c2013-0-07389-6 · Cited by 2,328
Review and analysis of PEM fuel cell design and manufacturing
Mehta, V., & Cooper, J. S. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00542-6 · Cited by 1,685
Irena: tool suite for modeling and analysis of small-angle scattering
Ilavsky, J., & Jemian, P. R. (2009) · Journal of Applied Crystallography · doi:10.1107/s0021889809002222 · Cited by 1,612
Litster, S., & McLean, G. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.12.055 · Cited by 1,275
Kongkanand, A., & Mathias, M. F. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00216 · Cited by 1,202
Mewis, J., & Wagner, N. J. (2011) · Cambridge University Press eBooks · doi:10.1017/cbo9780511977978 · Cited by 1,142
Nika : software for two-dimensional data reduction
Ilavsky, J. (2012) · Journal of Applied Crystallography · doi:10.1107/s0021889812004037 · Cited by 923
Research works printed but not linked: 9
- Borup R., 2017, FC-PAD: Fuel Cell Performance and Durability Consortium
- Kocha S., 2014, Best Practices and Benchmark Activities for ORR Measurements by the Rotating Disk Electrode Technique FC111
- Ulsh M., 2019, Material-Process-Performance Relationships in PEM Catalyst Inks and Coated Layers
- Debe M. K., 2010, Advanced Cathode Catalysts and Supports for PEM Fuel Cells
- 10.1149/2.0301813jes · DOI
- 10.1016/j.electacta.2016.04.023 · DOI · Paper page
- 10.1149/2.0031907jes · DOI · Paper page
- Derjaguin B., 1941, Acta Physicochem. URSS, 14, 633
- 10.1149/2.0401414jes · DOI
Cited by
New roads and challenges for fuel cells in heavy-duty transportation
Cullen, D. A., Neyerlin, K. C., Ahluwalia, R. K., Mukundan, R., More, K. L., Borup, R. L., Weber, A. Z., Myers, D. J., & Kusoglu, A. (2021) · Nature Energy · doi:10.1038/s41560-021-00775-z · Cited by 1,277
Self-citationDurability challenges of anion exchange membrane fuel cells
Mustain, W. E., Chatenet, M., Page, M., & Kim, Y. S. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01133a · Cited by 677
Chen, Y., Vise, A., Klein, W. E., Cetinbas, F. C., Myers, D. J., Smith, W. A., Deutsch, T. G., & Neyerlin, K. C. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c00860 · Cited by 179
Self-citationNguyen, H., Klose, C., Metzler, L., Vierrath, S., & Breitwieser, M. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202103559 · Cited by 133
Volk, E. K., Kreider, M. E., Kwon, S., & Alia, S. M. (2023) · EES Catalysis · doi:10.1039/d3ey00193h · Cited by 135
Roll-to-roll production of catalyst coated membranes for low-temperature electrolyzers
Park, J., Kang, Z., Bender, G., Ulsh, M., & Mauger, S. A. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228819 · Cited by 115
Self-citationAnion Exchange Ionomers: Design Considerations and Recent Advances ‐ An Electrochemical Perspective
Favero, S., Stephens, I. E. L., & Titirici, M. (2023) · Advanced Materials · doi:10.1002/adma.202308238 · Cited by 120
Yuan, X., Nayoze-Coynel, C., Shaigan, N., Fisher, D. C., Zhao, N., Zamel, N., Gazdzicki, P., Ulsh, M., Friedrich, K. A., Girard, F., et al. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229540 · Cited by 118
Self-citationLi, Y., Cleve, T. V., Sun, R., Gawas, R., Wang, G., Tang, M. H.-M., Elabd, Y. A., Snyder, J. D., & Neyerlin, K. C. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c00532 · Cited by 103
Self-citationOsmieri, L., Wang, G., Cetinbas, F. C., Khandavalli, S., Park, J., Medina, S., Mauger, S. A., Ulsh, M., Pylypenko, S., Myers, D. J., et al. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.104943 · Cited by 90
Self-citationCathode Design for Proton Exchange Membrane Fuel Cells in Automotive Applications
Wang, H., Wang, R., Sui, S., Sun, T. P., Yan, Y., & Du, S. (2021) · Automotive Innovation · doi:10.1007/s42154-021-00148-y · Cited by 93
Liu, H., Ney, L., Zamel, N., & Li, X. (2022) · Applied Sciences · doi:10.3390/app12083776 · Cited by 85
“These would affect the local gas transport resistance through the ionomer layer or the interfacial resistance between the ionomer film and Pt [60].”
BackgroundDevelopment of high-performance roll-to-roll-coated gas-diffusion-electrode-based fuel cells
Mauger, S. A., Wang, M., Cetinbas, F. C., Dzara, M. J., Park, J., Myers, D. J., Ahluwalia, R. K., Pylypenko, S., Hu, L., Litster, S., et al. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230039 · Cited by 84
Self-citationProbing Ionomer Interactions with Electrocatalyst Particles in Solution
Berlinger, S. A., McCloskey, B. D., & Weber, A. Z. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.1c00866 · Cited by 93
Self-citationHighly Durable Fluorinated High Oxygen Permeability Ionomers for Proton Exchange Membrane Fuel Cells
Macauley, N., Lousenberg, R. D., Spinetta, M., Zhong, S., Yang, F., Judge, W., Nikitin, V., Perego, A., Qi, Y., Pedram, S., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202201063 · Cited by 85
Gong, Q., Li, C., Liu, Y., Ilavsky, J., Guo, F., Cheng, X., & Xie, J. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c06711 · Cited by 72
Creel, E. B., Tjiptowidjojo, K., Alex Lee, J., Livingston, K. M., Randall Schunk, P., Bell, N. S., Serov, A., & Wood III, D. L. (2022) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2021.11.047 · Cited by 67
Integrating nanostructured Pt-based electrocatalysts in proton exchange membrane fuel cells
Ly, A., Asset, T., & Atanassov, P. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228516 · Cited by 65
Van Cleve, T., Wang, G., Mooney, M., Cetinbas, C. F., Kariuki, N., Park, J., Farghaly, A., Myers, D., & Neyerlin, K. C. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228889 · Cited by 66
Self-citationImpact of Dispersion Solvent on Ionomer Thin Films and Membranes
Berlinger, S. A., Dudenas, P. J., Bird, A., Chen, X., Freychet, G., McCloskey, B. D., Kusoglu, A., & Weber, A. Z. (2020) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c01076 · Cited by 65
Self-citationRamaswamy, N., Kumaraguru, S., Koestner, R., Fuller, T., Gu, W., Kariuki, N., Myers, D., Dudenas, P. J., & Kusoglu, A. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abe5eb · Cited by 62
Self-citationMulticomponent, multiphase interactions in fuel-cell inks
Berlinger, S. A., Garg, S., & Weber, A. Z. (2021) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2021.100744 · Cited by 62
Self-citationCheng, X., Shen, S., Wei, G., Wang, C., Luo, L., & Zhang, J. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202200228 · Cited by 63
Influence of ionomer adsorption on agglomerate structures in high-solid catalyst inks
Kumano, N., Kudo, K., Akimoto, Y., Ishii, M., & Nakamura, H. (2020) · Carbon · doi:10.1016/j.carbon.2020.07.047 · Cited by 61
Structure and conductivity of ionomer in PEM fuel cell catalyst layers: a model-based analysis
Olbrich, W., Kadyk, T., Sauter, U., Eikerling, M. H., & Gostick, J. T. (2023) · Scientific Reports · doi:10.1038/s41598-023-40637-0 · Cited by 69
Tang, M., Yan, H., Zhang, X., Zheng, Z., & Chen, S. (2023) · Advanced Materials · doi:10.1002/adma.202306387 · Cited by 69
Khandavalli, S., Iyer, R., Park, J. H., Myers, D. J., Neyerlin, K. C., Ulsh, M., & Mauger, S. A. (2020) · Langmuir · doi:10.1021/acs.langmuir.0c02015 · Cited by 56
Self-citationHarada, M., Takata, S.-I., Iwase, H., Kajiya, S., Kadoura, H., & Kanaya, T. (2021) · ACS Omega · doi:10.1021/acsomega.1c01535 · Cited by 57
Dzara, M. J., Artyushkova, K., Foster, J. G., Eskandari, H., Chen, Y., Mauger, S. A., Atanassov, P. B., Karan, K., & Pylypenko, S. (2024) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.4c00872 · Cited by 53
Self-citationBraaten, J. P., Kariuki, N. N., Myers, D. J., Blackburn, S., Brown, G., Park, A., & Litster, S. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230821 · Cited by 53
Self-citationWang, G., Osmieri, L., Star, A. G., Pfeilsticker, J., & Neyerlin, K. C. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab7aa1 · Cited by 59
Self-citationOlbrich, W., Kadyk, T., Sauter, U., & Eikerling, M. H. (2022) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac6e8b · Cited by 56
Eskandari, H., Paul, D. K., Young, A. P., & Karan, K. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c12667 · Cited by 54
Berlinger, S. A., Chowdhury, A., Cleve, T. V., He, A., Dagan, N., Neyerlin, K. C., McCloskey, B. D., Radke, C. J., & Weber, A. Z. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c10499 · Cited by 49
Self-citationWang, M., Medina, S., Ochoa-Lozano, J., Mauger, S. A., Pylypenko, S., Ulsh, M., & Bender, G. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.01.186 · Cited by 42
Self-citationChowdhury, A., Bird, A., Liu, J., Zenyuk, I. V., Kusoglu, A., Radke, C. J., & Weber, A. Z. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c07611 · Cited by 40
Self-citationHu, L., Cleve, T. V., Yu, H., Park, J. H., Kariuki, N. N., Kropf, A. J., Mukundan, R., Cullen, D. A., Myers, D. J., & Neyerlin, K. C. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.232490 · Cited by 38
Self-citationSun, F., Di, Q., Chen, M., Liu, H., & Wang, H. (2024) · eTransportation · doi:10.1016/j.etran.2024.100327 · Cited by 40
Wu, D., Kayo, N., Jayawickrama, S. M., Phua, Y. K., Tanaka, N., & Fujigaya, T. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.11.116 · Cited by 35
Cheng, X., Wei, G., Luo, L., Yin, J., Shen, S., & Zhang, J. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-023-00195-5 · Cited by 32
Zhang, R., Chen, L., Min, T., Mu, Y., Hao, L., & Tao, W. (2024) · Carbon Neutrality · doi:10.1007/s43979-024-00089-5 · Cited by 33
Mu, Y., Weber, A. Z., Gu, Z., Schuler, T., & Tao, W. (2020) · Sustainable Energy & Fuels · doi:10.1039/d0se00560f · Cited by 32
Self-citationKabir, S., Cleve, T. V., Khandavalli, S., Medina, S., Pylypenko, S., Mauger, S. A., Ulsh, M., & Neyerlin, K. C. (2021) · ACS Applied Energy Materials · doi:10.1021/acsaem.0c03073 · Cited by 34
Self-citationModeling of wetting phenomena in cathode catalyst layers for PEM fuel cells
Olbrich, W., Kadyk, T., Sauter, U., & Eikerling, M. H. (2022) · Electrochimica Acta · doi:10.1016/j.electacta.2022.140850 · Cited by 30
Lyu, X., Foster, J. G., Rice, R., Padgett, E., Creel, E. B., Li, J., Yu, H., Cullen, D. A., Kariuki, N. N., Park, J. H., et al. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.233503 · Cited by 32
Self-citationLu, Y., Li, S., & Qi, R. (2024) · International Journal of Green Energy · doi:10.1080/15435075.2024.2335507 · Cited by 32
“Van Cleve et al. (Van Cleve et al. 2019) measured Pt-sulfonate coverage, ionomer coverages on Pt and C surfaces and their relationship with oxygen transport using in situ electrochemical methods.”
Osmieri, L., Mauger, S. A., Ulsh, M., Neyerlin, K. C., & Bender, G. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.227829 · Cited by 31
Self-citationDetermining Proton Transport in Pseudo Catalyst Layers Using Hydrogen Pump DC and AC Techniques
Sabarirajan, D. C., Liu, J., Qi, Y., Perego, A., Haug, A. T., & Zenyuk, I. V. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab927d · Cited by 29
Yoshino, S., Harada, M., Hasegawa, N., & Jinnouchi, R. (2024) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2024.133847 · Cited by 30
Understanding Limitations in Electrochemical Conversion to CO at Low CO2 Concentrations
Henckel, D. A., Saha, P., Rajana, S., Baez-Cotto, C. M., Taylor, A. K., Liu, Z., Resch, M. G., Masel, R. I., & Neyerlin, K. C. (2024) · ACS Energy Letters · doi:10.1021/acsenergylett.4c01224 · Cited by 28
Self-citationTowards a realistic prediction of catalyst durability from liquid half-cell tests
Imhof, T., Bella, R. K. F. D., Stühmeier, B. M., Gasteiger, H. A., & Ledendecker, M. (2023) · Physical Chemistry Chemical Physics · doi:10.1039/d3cp02847j · Cited by 28
Impact of polymer additives on crack mitigation of rod-coated fuel cell cathode catalyst layers
Baez-Cotto, C. M., Pfeilsticker, J., Yu, H., Cleve, T. V., de Villers, B. J. T., Cetinbas, F. C., Kariuki, N. N., Park, J. H., Young, J. L., Myers, D. J., et al. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.233852 · Cited by 28
Self-citationReview—Meeting Fuel Cell Catalyst Requirements for Heavy-Duty Vehicle Applications
Ramaswamy, N., Kongkanand, A., Wortman, J., & Gu, W. (2025) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/adae3b · Cited by 27
The effect of catholyte and catalyst layer binders on CO2 electroreduction selectivity
Chen, Y., Wrubel, J. A., Vise, A. E., Intia, F., Harshberger, S., Klein, E., Smith, W. A., Ma, Z., Deutsch, T. G., & Neyerlin, K. C. (2022) · Chem Catalysis · doi:10.1016/j.checat.2022.01.011 · Cited by 26
Self-citationBaez-Cotto, C. M., Pfeilsticker, J., Godoy, A. O., Batool, M., Zaccarine, S. F., Wang, M., Bird, O. F., Pylypenko, S., Janković, J., Ulsh, M., et al. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.233567 · Cited by 25
Self-citationRegulating catalyst and ionomer interactions to promote oxygen transport in fuel cells
Wang, M., Zhang, S., Wang, H., Sun, E., Liu, D., Wu, M., Liu, D., & Li, Z. (2024) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2024.124894 · Cited by 33
Self-citationOsmieri, L., Wang, H., & Neyerlin, K. C. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abd48e · Cited by 23
Self-citationTemperature-induced shear-thinning in catalyst inks
Yoshimune, W., & Harada, M. (2021) · Electrochemistry Communications · doi:10.1016/j.elecom.2021.107099 · Cited by 22
The Impact of Hot-Press Conditions on the Durability of Polymer Electrolyte Membrane Fuel Cells
Wang, M., Taylor, A. K., Ochoa-Lozano, J., Medina, S., Pfeilsticker, J., Mauger, S. A., Pylypenko, S., Ulsh, M., & Bender, G. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.12.098 · Cited by 22
Self-citationIonomeric binders in polymer electrolyte fuel cells: roles, challenges, and advances
Yu, W., Luo, F., Liang, X., Jiang, C., Xu, Y., Liu, Z., An, Q., Guiver, M. D., Wu, L., & Xu, T. (2025) · Chemical Society Reviews · doi:10.1039/d5cs00406c · Cited by 21
Gao, X. P., Yamamoto, K., Hirai, T., Ohta, N., Uchiyama, T., Watanabe, T., Imai, H., Sugawara, S., Shinohara, K., & Uchimoto, Y. (2021) · ACS Omega · doi:10.1021/acsomega.1c00607 · Cited by 22
Solvent Effects on the Catalyst Ink and Layer Microstructure for Anion Exchange Membrane Fuel Cells
Han, C., Shi, W., Huang, M., Wang, Q., Yang, J., Chen, J., Ding, R., & Yin, X. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c14404 · Cited by 23
Modulating Perfluorinated Ionomer Functionality via Sidechain Chemistry
Bird, A., Lindell, M. J., Kushner, D. I., Haug, A. T., Yandrasits, M., & Kusoglu, A. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202311073 · Cited by 21
Liu, P., Yang, D., Li, B., Qu, T., Ming, P., Zhang, C., & Pan, X. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.234309 · Cited by 23
Review—Graded Catalyst Layers in Hydrogen Fuel Cells - A Pathway to Application-Tailored Cells
Ayoub, M., Böhm, T., Bierling, M., Thiele, S., & Brodt, M. W. (2024) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ad73a7 · Cited by 25
PFSA-Ionomer Adsorption to C and Pt/C Particles in Fuel-Cell Inks
Rajupet, S., Weber, A. Z., & Radke, C. J. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c00211 · Cited by 24
Self-citationSustainable supply of critical materials for water electrolysers and fuel cells
Xun, D., Liu, M., Hao, H., Sun, X., Geng, Y., You, F., Dou, H., Li, H., & Dong, Z. (2025) · Communications Earth & Environment · doi:10.1038/s43247-025-02621-6 · Cited by 21
Dynamic Emergence of Nanostructure and Transport Properties in Perfluorinated Sulfonic Acid Ionomers
Katzenberg, A., Mukherjee, D., Dudenas, P. J., Okamoto, Y., Kusoglu, A., & Modestino, M. A. (2020) · Macromolecules · doi:10.1021/acs.macromol.0c01213 · Cited by 19
Understanding Platinum Ionomer Interface Properties of Polymer Electrolyte Fuel Cells
Qi, Y., Morimoto, Y., Shibata, M. S., Gao, Z., Sabarirajan, D. C., Haug, A. T., & Zenyuk, I. V. (2022) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac774f · Cited by 22
Proton Conducting Sulfonated Poly(Ionic Liquid) Block Copolymers
Sun, R., Agrawal, M., Neyerlin, K. C., Snyder, J. D., & Elabd, Y. A. (2022) · Macromolecules · doi:10.1021/acs.macromol.2c00468 · Cited by 18
Self-citationLiepold, H., Bird, A., Heizmann, P. A., Fadlullah, H., Nguyen, H. Q., Klose, C., Holdcroft, S., Kusoglu, A., Vierrath, S., & Münchinger, A. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.235537 · Cited by 20
Durable Fuel Cell Electrode Design via Efficient Distribution of the Acidic Ionomer
Ramaswamy, N., & Wortman, J. (2024) · ACS Energy Letters · doi:10.1021/acsenergylett.4c02704 · Cited by 23
PFSA‐Ionomer Dispersions to Thin‐Films: Interplay Between Sidechain Chemistry and Dispersion Solvent
Bird, A., Kim, Y. J., Berlinger, S. A., Weber, A. Z., & Kusoglu, A. (2025) · Advanced Energy Materials · doi:10.1002/aenm.202404242 · Cited by 20
Self-citationChallenges of fabricating catalyst layers for PEM fuel cells using flatbed screen printing
Ney, L., Hog, J., Singh, R., Göttlicher, N., Schneider, P., Tepner, S., Klingele, M., Keding, R. J., Clement, F., & Groos, U. (2022) · Journal of Coatings Technology and Research · doi:10.1007/s11998-022-00710-1 · Cited by 21
“On the other hand, if the water content is too low, larger, free ionomer aggregates are forming without interacting with the Pt/C-surface.(45) Therefore, the higher viscosity of the catalyst paste with water could be due to the stronger interactions/ adsorption of ionomer to the Pt/C particles, hence creating a strong…”
BackgroundInfluentialFoster, J. G., Lyu, X., Serov, A., Mauger, S. A., Padgett, E., & Pylypenko, S. (2025) · Electrochimica Acta · doi:10.1016/j.electacta.2025.145705 · Cited by 19
Self-citationKhandavalli, S., Park, J., Rice, R., Zhang, D. Y., Berlinger, S. A., Bender, G., Myers, D. J., Ulsh, M., & Mauger, S. A. (2024) · Soft Matter · doi:10.1039/d4sm00987h · Cited by 17
Self-citationLu, Y., Fang, W., Xuan, Z.-H., Zhao, G.-R., An, K.-B., & Tao, W. (2024) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2024.108280 · Cited by 17
Minami, S., Kajiya, S., Yamada, H., Shinozaki, K., & Jinnouchi, R. (2023) · Electrocatalysis · doi:10.1007/s12678-023-00809-y · Cited by 18
Ionomer-free electrocatalyst using acid-grafted carbon black as a proton-conductive support
Yoshihara, R., Wu, D., Phua, Y. K., Nagashima, A., Choi, E., Jayawickrama, S. M., Ishikawa, S., Liu, X., Inoue, G., & Fujigaya, T. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.231192 · Cited by 19
Medina, S., Foster, J. G., Dzara, M. J., Wang, M., Ulsh, M., Mauger, S. A., & Pylypenko, S. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4265709 · Cited by 17
Self-citationGuo, Y., Yang, D., Tang, H., Li, B., Yang, D., Ming, P., & Zhang, C. (2022) · Physics of Fluids · doi:10.1063/5.0102157 · Cited by 16
Wang, H., Osmieri, L., Yu, H., Zachman, M. J., Park, J. H., Kariuki, N. N., Cetinbas, F. C., Khandavalli, S., Mauger, S. A., Myers, D. J., et al. (2022) · SusMat · doi:10.1002/sus2.106 · Cited by 16
Self-citationHirai, T., Hommura, S., Watakabe, A., Miyajima, T., Nakayama, S., Tamoto, K., & Uchida, M. (2024) · ACS Applied Energy Materials · doi:10.1021/acsaem.4c00177 · Cited by 16
Kim, S., Ahn, C., Karuppannan, M., Sung, Y., Kwon, O. J., & Cho, Y. (2021) · International Journal of Energy Research · doi:10.1002/er.7583 · Cited by 15
Devi, S. B., Maruthasalamoorthy, S., Sekar, S., Lee, S., & Navamathavan, R. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.08.148 · Cited by 16
Chowdhury, A., Radke, C. J., & Weber, A. Z. (2023) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ad09fc · Cited by 14
Self-citationScreen Printing Catalyst Inks With Enhanced Process Stability for PEM Fuel Cell Production
Ney, L., Seidl, N., Singh, R., Schneider, P., Stross, D., Göppentin, A., Tepner, S., Klingele, M., & Keding, R. J. (2024) · Fuel Cells · doi:10.1002/fuce.202400158 · Cited by 16
Quarz, P., Zimmerer, N., Scharfer, P., & Schabel, W. (2024) · Fuel Cells · doi:10.1002/fuce.202300252 · Cited by 17
Martin, J., Küspert, S., Christmann, K., Marić, R., von Holst, M., Fadlullah, H., Elsäßer, P., Friedrich, K. A., Vierrath, S., Zamel, N., et al. (2025) · Advanced Energy Materials · doi:10.1002/aenm.202500954 · Cited by 15
Cho, J., Ko, J., & Park, S. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab8d71 · Cited by 12
Srivastav, H., Weber, A. Z., & Radke, C. J. (2024) · Langmuir · doi:10.1021/acs.langmuir.3c03904 · Cited by 14
Self-citationLauf, P., Morales, A. L., Nozadze, A., Ayoub, M., Bierling, M., Ehelebe, K., Thiele, S., Mayrhofer, K. J. J., Lloret, V., & Cherevko, S. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.235352 · Cited by 11
Imhof, T., Bella, R. K. F. D., Paciok, P., Lauf, P., Roumeliotis, P., Gunnarson, A., Koh, E. S., Schüth, F., Cherevko, S., Heggen, M., et al. (2025) · ACS Catalysis · doi:10.1021/acscatal.5c01466 · Cited by 16
Anolyte Enhances Catalyst Utilization and Ion Transport Inside a CO2 Electrolyzer Cathode
Saha, P., Henckel, D. A., Baez-Cotto, C. M., Intia, F., Hu, L., Cleve, T. V., & Neyerlin, K. C. (2023) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/acb01d · Cited by 12
Self-citationPei, Y., Zhu, W., Yue, R., Yao, J., Liu, X., Wang, L., Zhang, J., Yin, Y. S., & Guiver, M. D. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.232904 · Cited by 10
Henckel, D. A., Saha, P., Intia, F., Taylor, A. K., Baez-Cotto, C. M., Hu, L., Schellekens, M. P., Simonson, H., Miller, E. M., Verma, S., et al. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c11743 · Cited by 10
Self-citationBurghart, J., Ovarlez, G., & Medina‐González, Y. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.238497 · Cited by 10
Kariuki, N. N., Haug, A. T., Park, J. W., Lindell, M. J., & Myers, D. J. (2022) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac94a4 · Cited by 11
Self-citationAcid-Doped Hydrogel Electrolytes for Electrocatalyst Interfaces
Katzenberg, A., Davila, C. M., Chen, B., Siboonruang, T., & Modestino, M. A. (2020) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c00214 · Cited by 9
Zheng, C., Xiao, D., Zhang, J., Pei, Y., Wang, L., Liu, X., Yin, Y. S., Guiver, M. D., & Li, X. (2023) · Journal of Materials Chemistry A · doi:10.1039/d3ta02720a · Cited by 8
Metadata
- Authors
- Van Cleve, T., Khandavalli, S., Chowdhury, A., Medina, S., Pylypenko, S., Wang, M., More, K. L., Kariuki, N., Myers, D. J., Weber, A. Z., Mauger, S. A., Ulsh, M., & Neyerlin, K. C.
- Affiliations
- Chemistry and Nanoscience Center, National Renewable Energy Laboratory, Golden, Colorado 80401, United States
- National Laboratory of the Rockies (US)
- Lawrence Berkeley National Laboratory (US)
- Colorado School of Mines (US)
- Oak Ridge National Laboratory (US)
- Argonne National Laboratory (US)
- Corresponding author
- Neyerlin, K. C.
- ORCID
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-11-19
- Volume
- 11
- Issue
- 50
- Pages
- 46953-46964
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2990772530
- Cited by
- 148
- References
- 70
- Citations by year
- 2026: 20 · 2025: 28 · 2024: 26 · 2023: 16 · 2022: 21 · 2021: 18 · 2020: 19
- FWCI
- 5.21
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- ACS Applied Materials & Interfaces (publishedVersion)
- PubMed (publishedVersion)
- eScholarship (California Digital Library) (submittedVersion)
- OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
- Funders
- Fuel Cell Technologies Office (DE-AC02-05CH11231)
- Office of Science (DE-AC36-08GO28308, DE-AC02-06CH11357)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
- Keywords
- platinum electrocatalysts, proton exchange membrane fuel cells, catalyst ink, anion adsorption, oxygen transport resistance, Vulcan carbon support, low platinum loading, electrode microstructure
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.