CoChat

Dictating Pt-Based Electrocatalyst Performance in Polymer Electrolyte Fuel Cells, from Formulation to Application

The DOI matches its Crossref record; 69 of the 70 references it cites were found in a registry or an index.

Abstract

In situ electrochemical diagnostics designed to probe ionomer interactions with platinum and carbon were applied to relate ionomer coverage and conformation, gleaned from anion adsorption data, with O 2 transport resistance for low-loaded (0.05 mg Pt cm –2 ) platinum-supported Vulcan carbon (Pt/Vu)-based electrodes in a polymer electrolyte fuel cell. Coupling the in situ diagnostic data with ex situ characterization of catalyst inks and electrode structures, the effect of ink composition is explained by both ink-level interactions that dictate the electrode microstructure during fabrication and the resulting local ionomer distribution near catalyst sites. Electrochemical techniques (CO displacement and ac impedance) show that catalyst inks with higher water content increase ionomer (sulfonate) interactions with Pt sites without significantly affecting ionomer coverage on the carbon support. Surprisingly, the higher anion adsorption is shown to have a minor impact on specific activity, while exhibiting a complex relationship with oxygen transport. Ex situ characterization of ionomer suspensions and catalyst/ionomer inks indicates that the lower ionomer coverage can be correlated with the formation of large ionomer aggregates and weaker ionomer/catalyst interactions in low-water content inks. These larger ionomer aggregates resulted in increased local oxygen transport resistance, namely, through the ionomer film, and reduced performance at high current density. In the water-rich inks, the ionomer aggregate size decreases, while stronger ionomer/Pt interactions are observed. The reduced ionomer aggregation improves transport resistance through the ionomer film, while the increased adsorption leads to the emergence of resistance at the ionomer/Pt interface. Overall, the high current density performance is shown to be a nonmonotonic function of ink water content, scaling with the local gas (H 2, O 2 ) transport resistance resulting from pore, thin film, and interfacial phenomena.

Overview

Integrity signals

Registry

Crossref · 10.1021/acsami.9b17614

Cites

69 of 69 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 69 references

Research works printed but not linked: 9

  1. Borup R., 2017, FC-PAD: Fuel Cell Performance and Durability Consortium
  2. Kocha S., 2014, Best Practices and Benchmark Activities for ORR Measurements by the Rotating Disk Electrode Technique FC111
  3. Ulsh M., 2019, Material-Process-Performance Relationships in PEM Catalyst Inks and Coated Layers
  4. Debe M. K., 2010, Advanced Cathode Catalysts and Supports for PEM Fuel Cells
  5. 10.1149/2.0301813jes · DOI
  6. 10.1016/j.electacta.2016.04.023 · DOI · Paper page
  7. 10.1149/2.0031907jes · DOI · Paper page
  8. Derjaguin B., 1941, Acta Physicochem. URSS, 14, 633
  9. 10.1149/2.0401414jes · DOI

Cited by

See all 150

Metadata

Authors
Van Cleve, T., Khandavalli, S., Chowdhury, A., Medina, S., Pylypenko, S., Wang, M., More, K. L., Kariuki, N., Myers, D. J., Weber, A. Z., Mauger, S. A., Ulsh, M., & Neyerlin, K. C.
Affiliations
  • Chemistry and Nanoscience Center, National Renewable Energy Laboratory, Golden, Colorado 80401, United States
  • National Laboratory of the Rockies (US)
  • Lawrence Berkeley National Laboratory (US)
  • Colorado School of Mines (US)
  • Oak Ridge National Laboratory (US)
  • Argonne National Laboratory (US)
Corresponding author
Neyerlin, K. C.
Venue
ACS Applied Materials & Interfaces
Published
2019-11-19
Volume
11
Issue
50
Pages
46953-46964
ISSN
  • 1944-8244 (ISSN-L)
  • 1944-8252
OpenAlex
W2990772530
Cited by
148
References
70
Citations by year
2026: 20 · 2025: 28 · 2024: 26 · 2023: 16 · 2022: 21 · 2021: 18 · 2020: 19
FWCI
5.21
Type
journal article
Language
en
Open access
closed
Locations
  • ACS Applied Materials & Interfaces (publishedVersion)
  • PubMed (publishedVersion)
  • eScholarship (California Digital Library) (submittedVersion)
  • OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
Funders
  • Fuel Cell Technologies Office (DE-AC02-05CH11231)
  • Office of Science (DE-AC36-08GO28308, DE-AC02-06CH11357)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
  • Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
Keywords
platinum electrocatalysts, proton exchange membrane fuel cells, catalyst ink, anion adsorption, oxygen transport resistance, Vulcan carbon support, low platinum loading, electrode microstructure

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.