The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Effect of Ti3AlC2 MAX Phase on Structure and Properties of Resultant Ti3C2Tx MXene
Abstract
Ti 3 C 2 T x MXene is an attractive two-dimensional (2D) material for a wide variety of applications; however, measured properties vary widely from study to study. A potential factor to the property differences relates to variability in the MAX phase precursors. To illustrate this, Ti 3 AlC 2, the precursor for Ti 3 C 2 T x MXene, was synthesized using three carbon sources (graphite, carbon lampblack, and titanium carbide (TiC)) at 1650 °C for 2 h. Thermal analysis was utilized to examine the reaction mechanism, indicating that the three carbon sources experience different reaction pathways. The Ti 3 AlC 2 MAX powders were then converted into Ti 3 C 2 T x MXene and delaminated. The products revealed differences with respect to the lateral flake size, chemical composition, chemical stability in deionized water, and electrical conductivity. Graphite-produced Ti 3 C 2 T x showed the highest conductivity (∼4400 S/cm) and is the most stable (time constant of 10.1 days), while TiC-produced MXene has comparable conductivity (∼3480 S/cm), but the lowest colloidal stability (4.8 days), and carbon lampblack has the lowest conductivity (∼1020 S/cm) and low chemical stability (5.1 days). Furthermore, gas sensors were fabricated from all three MXenes to probe differences in their performance. The TiC-produced Ti 3 C 2 T x showed the highest response, followed by graphite-produced, and last Ti 3 C 2 T x produced from carbon lampblack. This illustrates that synthesis of the MAX precursor material leads to significant difference within the resultant MXene and provides another pathway for further control over their properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
NIH Image to ImageJ: 25 years of image analysis
Schneider, C. A., Rasband, W. S., & Eliceiri, K. W. (2012) · Nature Methods · doi:10.1038/nmeth.2089 · Cited by 64,638
Two‐Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
Naguib, M., Kurtoglu, M., Presser, V., Lu, J., Niu, J., Heon, M., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2011) · Advanced Materials · doi:10.1002/adma.201102306 · Cited by 11,855
Self-citation2D metal carbides and nitrides (MXenes) for energy storage
Anasori, B., Lukatskaya, M. R., & Gogotsi, Y. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.98 · Cited by 7,440
Self-citation25th Anniversary Article: MXenes: A New Family of Two‐Dimensional Materials
Naguib, M., Mochalin, V. N., Barsoum, M. W., & Gogotsi, Y. (2014) · Advanced Materials · doi:10.1002/adma.201304138 · Cited by 6,414
Self-citationGSAS-II: the genesis of a modern open-source all purpose crystallography software package
Toby, B. H., & Von Dreele, R. B. (2013) · Journal of Applied Crystallography · doi:10.1107/s0021889813003531 · Cited by 6,195
Electromagnetic interference shielding with 2D transition metal carbides (MXenes)
Shahzad, F., Alhabeb, M., Hatter, C. B., Anasori, B., Man Hong, S., Koo, C. M., & Gogotsi, Y. (2016) · Science · doi:10.1126/science.aag2421 · Cited by 5,201
Self-citationGuidelines for Synthesis and Processing of Two-Dimensional Titanium Carbide (Ti3C2Tx MXene)
Alhabeb, M., Maleski, K., Anasori, B., Lelyukh, P., Clark, L., Sin, S., & Gogotsi, Y. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b02847 · Cited by 5,045
Self-citationTwo-Dimensional Transition Metal Carbides
Naguib, M., Mashtalir, O., Carle, J., Presser, V., Lu, J., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2012) · ACS Nano · doi:10.1021/nn204153h · Cited by 4,769
Self-citationX-ray photoelectron spectroscopy of select multi-layered transition metal carbides (MXenes)
Halim, J., Cook, K. M., Naguib, M., Eklund, P., Gogotsi, Y., Rosen, J., & Barsoum, M. W. (2016) · Applied Surface Science · doi:10.1016/j.apsusc.2015.11.089 · Cited by 2,047
Self-citationRan, J., Gao, G., Li, F.-T., Ma, T.-Y., Du, A., & Qiao, S.-Z. (2017) · Nature Communications · doi:10.1038/ncomms13907 · Cited by 2,023
Lipatov, A., Alhabeb, M., Lukatskaya, M. R., Boson, A., Gogotsi, Y., & Sinitskii, A. (2016) · Advanced Electronic Materials · doi:10.1002/aelm.201600255 · Cited by 1,751
Self-citationOxidation Stability of Colloidal Two-Dimensional Titanium Carbides (MXenes)
Zhang, C. J., Pinilla, S., McEvoy, N., Cullen, C. P., Anasori, B., Long, E., Park, S.-H., Seral-Ascaso, A., Shmeliov, A., Krishnan, D., et al. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00745 · Cited by 1,725
Self-citationMetallic Ti3C2T x MXene Gas Sensors with Ultrahigh Signal-to-Noise Ratio
Kim, S. J., Koh, H.-J., Ren, C. E., Kwon, O., Maleski, K., Cho, S.-Y., Anasori, B., Kim, C.-K., Choi, Y.-K., Kim, J., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b07460 · Cited by 1,699
Self-citationAntibacterial Activity of Ti3C2Tx MXene
Rasool, K., Helal, M., Ali, A., Ren, C. E., Gogotsi, Y., & Mahmoud, K. A. (2016) · ACS Nano · doi:10.1021/acsnano.6b00181 · Cited by 1,449
Self-citationControl of MXenes’ electronic properties through termination and intercalation
Hart, J. L., Hantanasirisakul, K., Lang, A. C., Anasori, B., Pinto, D., Pivak, Y., van Omme, J. T., May, S. J., Gogotsi, Y., & Taheri, M. L. (2019) · Nature Communications · doi:10.1038/s41467-018-08169-8 · Cited by 1,342
Self-citationElectronic and Optical Properties of 2D Transition Metal Carbides and Nitrides (MXenes)
Hantanasirisakul, K., & Gogotsi, Y. (2018) · Advanced Materials · doi:10.1002/adma.201804779 · Cited by 1,325
Self-citationTwo-dimensional transition metal carbides and nitrides (MXenes) for biomedical applications
Huang, K., Li, Z., Lin, J., Han, G., & Huang, P. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00838d · Cited by 1,100
Dispersions of Two-Dimensional Titanium Carbide MXene in Organic Solvents
Maleski, K., Mochalin, V. N., & Gogotsi, Y. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b04830 · Cited by 1,033
Self-citationHan, M., Yin, X., Wu, H., Hou, Z., Song, C., Li, X., Zhang, L., & Cheng, L. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b06455 · Cited by 996
Self-citationHighly Conductive Optical Quality Solution‐Processed Films of 2D Titanium Carbide
Dillon, A. D., Ghidiu, M. J., Krick, A. L., Griggs, J., May, S. J., Gogotsi, Y., Barsoum, M. W., & Fafarman, A. T. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201600357 · Cited by 988
Self-citationNMR reveals the surface functionalisation of Ti3C2MXene
Hope, M. A., Forse, A. C., Griffith, K. J., Lukatskaya, M. R., Ghidiu, M., Gogotsi, Y., & Grey, C. P. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp00330c · Cited by 974
Self-citationSynthesis and thermal stability of two-dimensional carbide MXene Ti3C2
Li, Z., Wang, L., Sun, D., Zhang, Y., Liu, B., Hu, Q., & Zhou, A. (2015) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2014.10.009 · Cited by 928
Room Temperature Gas Sensing of Two-Dimensional Titanium Carbide (MXene)
Lee, E., VahidMohammadi, A., Prorok, B. C., Yoon, Y. S., Beidaghi, M., & Kim, D.-J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11055 · Cited by 878
MXene-based materials for electrochemical energy storage
Zhang, X., Zhang, Z., & Zhou, Z. (2018) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2017.08.004 · Cited by 777
Yu, X.-F., Li, Y.-C., Cheng, J.-B., Liu, Z.-B., Li, Q.-Z., Li, W.-Z., Yang, X., & Xiao, B. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b03737 · Cited by 676
Oxidation stability of Ti3C2Tx MXene nanosheets in solvents and composite films
Habib, T., Zhao, X., Shah, S. A., Chen, Y., Sun, W., An, H., Lutkenhaus, J. L., Radović, M., & Green, M. J. (2019) · npj 2D Materials and Applications · doi:10.1038/s41699-019-0089-3 · Cited by 629
2D titanium carbide (MXene) for wireless communication
Sarycheva, A., Polemi, A., Liu, Y., Dandekar, K., Anasori, B., & Gogotsi, Y. (2018) · Science Advances · doi:10.1126/sciadv.aau0920 · Cited by 542
Self-citationHigh-Temperature Behavior and Surface Chemistry of Carbide MXenes Studied by Thermal Analysis
Seredych, M., Shuck, C. E., Pinto, D., Alhabeb, M., Precetti, E., Deysher, G., Anasori, B., Kurra, N., & Gogotsi, Y. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b00397 · Cited by 519
Self-citationHydrolysis of 2D Transition-Metal Carbides (MXenes) in Colloidal Solutions
Huang, S., & Mochalin, V. N. (2019) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.8b02890 · Cited by 465
Two-Dimensional Vanadium Carbide (MXene) as Positive Electrode for Sodium-Ion Capacitors
Dall’Agnese, Y., Taberna, P.-L., Gogotsi, Y., & Simon, P. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00868 · Cited by 463
Self-citationSize-Dependent Physical and Electrochemical Properties of Two-Dimensional MXene Flakes
Maleski, K., Ren, C. E., Zhao, M.-Q., Anasori, B., & Gogotsi, Y. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b04662 · Cited by 461
Self-citationAdsorptive environmental applications of MXene nanomaterials: a review
Zhang, Y., Wang, L., Zhang, N., & Zhou, Z. (2018) · RSC Advances · doi:10.1039/c8ra03077d · Cited by 453
An investigation into the factors governing the oxidation of two-dimensional Ti3C2MXene
Chae, Y., Kim, S. J., Cho, S.-Y., Choi, J., Maleski, K., Lee, B.-J., Jung, H.-T., Gogotsi, Y., Lee, Y., & Ahn, C. W. (2019) · Nanoscale · doi:10.1039/c9nr00084d · Cited by 403
Self-citationTwo-dimensional MXenes for energy storage
Sun, S., Liao, C., Hafez, A. M., Zhu, H., & Wu, S. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.12.155 · Cited by 378
On the organization and thermal behavior of functional groups on Ti 3 C 2 MXene surfaces in vacuum
Persson, I., Näslund, L.-Å., Halim, J., Barsoum, M. W., Darakchieva, V., Palisaitis, J., Rosen, J., & Persson, P. O. Å. (2017) · 2D Materials · doi:10.1088/2053-1583/aa89cd · Cited by 354
Han, M., Yin, X., Hantanasirisakul, K., Li, X., Iqbal, A., Hatter, C. B., Anasori, B., Koo, C. M., Torita, T., Soda, Y., et al. (2019) · Advanced Optical Materials · doi:10.1002/adom.201900267 · Cited by 342
Self-citationTopochemical synthesis of 2D materials
Xiao, X., Wang, H., Urbankowski, P., & Gogotsi, Y. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00649k · Cited by 317
Self-citationSrimuk, P., Halim, J., Lee, J., Tao, Q., Rosen, J., & Presser, V. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b04095 · Cited by 231
Electrochromic Effect in Titanium Carbide MXene Thin Films Produced by Dip‐Coating
Salles, P., Pinto, D., Hantanasirisakul, K., Maleski, K., Shuck, C. E., & Gogotsi, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201809223 · Cited by 215
Self-citationEnhanced Terahertz Shielding of MXenes with Nano‐Metamaterials
Choi, G., Shahzad, F., Bahk, Y., Jhon, Y. M., Park, H., Alhabeb, M., Anasori, B., Kim, D., Koo, C. M., Gogotsi, Y., et al. (2018) · Advanced Optical Materials · doi:10.1002/adom.201701076 · Cited by 205
Self-citationSelective Etching of Silicon from Ti3SiC2 (MAX) To Obtain 2D Titanium Carbide (MXene)
Alhabeb, M., Maleski, K., Mathis, T. S., Sarycheva, A., Hatter, C. B., Uzun, S., Levitt, A., & Gogotsi, Y. (2018) · Angewandte Chemie · doi:10.1002/ange.201802232 · Cited by 175
Self-citationTheoretical Prediction of the Intrinsic Half-Metallicity in Surface-Oxygen-Passivated Cr2N MXene
Wang, G. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b05224 · Cited by 162
Cited by
Fundamentals of MXene synthesis
Lim, K. R. G., Shekhirev, M., Wyatt, B. C., Anasori, B., Gogotsi, Y., & Seh, Z. W. (2022) · Nature Synthesis · doi:10.1038/s44160-022-00104-6 · Cited by 1,236
Self-citationModified MAX Phase Synthesis for Environmentally Stable and Highly Conductive Ti 3 C 2 MXene
Mathis, T. S., Maleski, K., Goad, A., Sarycheva, A., Anayee, M., Foucher, A. C., Hantanasirisakul, K., Shuck, C. E., Stach, E. A., & Gogotsi, Y. (2021) · ACS Nano · doi:10.1021/acsnano.0c08357 · Cited by 1,001
Self-citationScalable Synthesis of Ti3C2Tx MXene
Shuck, C. E., Sarycheva, A., Anayee, M., Levitt, A., Zhu, Y., Uzun, S., Balitskiy, V., Zahorodna, V., Gogotsi, O., & Gogotsi, Y. (2020) · Advanced Engineering Materials · doi:10.1002/adem.201901241 · Cited by 868
Self-citationCharacterization of MXenes at every step, from their precursors to single flakes and assembled films
Shekhirev, M., Shuck, C. E., Sarycheva, A., & Gogotsi, Y. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100757 · Cited by 752
Self-citationDeysher, G., Shuck, C. E., Hantanasirisakul, K., Frey, N. C., Foucher, A. C., Maleski, K., Sarycheva, A., Shenoy, V. B., Stach, E. A., Anasori, B., et al. (2020) · ACS Nano · doi:10.1021/acsnano.9b07708 · Cited by 720
Self-citation
Metadata
- Authors
- Shuck, C. E., Han, M., Maleski, K., Hantanasirisakul, K., Kim, S. J., Choi, J., Reil, W. E. B., & Gogotsi, Y.
- Venue
- ACS Applied Nano Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-05-13
- Volume
- 2
- Issue
- 6
- Pages
- 3368-3376
- ISSN
- 2574-0970 (ISSN-L)
- OpenAlex
- W2946751271
- Cited by
- 404
- References
- 42
- FWCI
- 10.77
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.