FRESH 3D Bioprinting a Full-Size Model of the Human Heart
The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Abstract
Recent advances in embedded three-dimensional (3D) bioprinting have expanded the design space for fabricating geometrically complex tissue scaffolds using hydrogels with mechanical properties comparable to native tissues and organs in the human body. The advantage of approaches such as Freeform Reversible Embedding of Suspended Hydrogels (FRESH) printing is the ability to embed soft biomaterials in a thermoreversible support bath at sizes ranging from a few millimeters to centimeters. In this study, we were able to expand this printable size range by FRESH bioprinting a full-size model of an adult human heart from patient-derived magnetic resonance imaging (MRI) data sets. We used alginate as the printing biomaterial to mimic the elastic modulus of cardiac tissue. In addition to achieving high print fidelity on a low-cost printer platform, FRESH-printed alginate proved to create mechanically tunable and suturable models. This demonstrates that large-scale 3D bioprinting of soft hydrogels is possible using FRESH and that cardiac tissue constructs can be produced with potential future applications in surgical training and planning.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Printing the ECM components at current resolutions (~250 μm feature sizes) takes hours to days (22), but at native feature sizes (1 μm) could take hundreds of years if current scaling trends are followed (eq. S1).”
From Recreating the heart's helical structure-function relationship with focused rotary jet spinning (2022) · cites this paper as [22]
In the citing paper
“Although full-size anatomical models have previously been produced with thermoplastics and hydrogels (22), these systems typically lack the micrometer-scale features needed to direct myocyte alignment.”
From Recreating the heart's helical structure-function relationship with focused rotary jet spinning (2022) · cites this paper as [22]
Citations
Cites
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
Self-citation3D bioprinting of collagen to rebuild components of the human heart
Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W. (2019) · Science · doi:10.1126/science.aav9051 · Cited by 1,782
Self-citation3D printing based on imaging data: review of medical applications
Rengier, F., Mehndiratta, A., von Tengg-Kobligk, H., Zechmann, C. M., Unterhinninghofen, R., Kauczor, H.-U., & Giesel, F. L. (2010) · International Journal of Computer Assisted Radiology and Surgery · doi:10.1007/s11548-010-0476-x · Cited by 1,584
Kuo, C. K., & Ma, P. X. (2001) · Biomaterials · doi:10.1016/s0142-9612(00)00201-5 · Cited by 1,491
Indentation Versus Tensile Measurements of Young's Modulus for Soft Biological Tissues
McKee, C. T., Last, J. A., Russell, P., & Murphy, C. J. (2011) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2010.0520 · Cited by 708
Boontheekul, T., Kong, H.-J., & Mooney, D. J. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.06.044 · Cited by 659
Gao, T., Gillispie, G. J., Copus, J. S., PR, A. K., Seol, Y.-J., Atala, A., Yoo, J. J., & Lee, S. J. (2018) · Biofabrication · doi:10.1088/1758-5090/aacdc7 · Cited by 510
3D Printing PDMS Elastomer in a Hydrophilic Support Bath via Freeform Reversible Embedding
Hinton, T. J., Hudson, A., Pusch, K., Lee, A., & Feinberg, A. W. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00170 · Cited by 437
Self-citationEngler, A. J., Richert, L., Wong, J. Y., Picart, C., & Discher, D. E. (2004) · Surface Science · doi:10.1016/j.susc.2004.06.179 · Cited by 370
Filippou, V., & Tsoumpas, C. (2018) · Medical Physics · doi:10.1002/mp.13058 · Cited by 313
Research works printed but not linked: 1
- 10.9790/9622-0710021619 · doi:10.9790/9622-0710021619
Cited by
Items 101–200 of 315
In vitro construction of lung cancer organoids by 3D bioprinting for drug evaluation
Dong, Q., Su, X., Li, X., Zhou, H., Jian, H., Bai, S., Yin, J., & You, Q. (2023) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2023.131288 · Cited by 31
Advances in Cell‐Rich Inks for Biofabricating Living Architectures
Almeida‐Pinto, J., Moura, B. S., Gaspar, V. M., & Mano, J. F. (2024) · Advanced Materials · doi:10.1002/adma.202313776 · Cited by 30
Design considerations and biomaterials selection in embedded extrusion 3D bioprinting
Yogeshwaran, S., Hosseinabadi, H. G., Gendy, D. E., & Miri, A. K. (2024) · Biomaterials Science · doi:10.1039/d4bm00550c · Cited by 31
A suspended layer additive manufacturing approach to the bioprinting of tri-layered skin equivalents
Moakes, R. J. A., Senior, J. J., Robinson, T. E., Chipara, M., Atansov, A., Naylor, A. J., Metcalfe, A. D., Smith, A. M., & Grover, L. M. (2021) · APL Bioengineering · doi:10.1063/5.0061361 · Cited by 30
Long-Fiber Embedded Hydrogel 3D Printing for Structural Reinforcement
Sun, W., Tashman, J. W., Shiwarski, D. J., Feinberg, A. W., & Webster‐Wood, V. A. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.1c00908 · Cited by 30
Self-citationTissue-engineered heart chambers as a platform technology for drug discovery and disease modeling
Mousavi, A., Stefanek, E., Jafari, A., Ajji, Z., Naghieh, S., Akbari, M., & Savoji, H. (2022) · Biomaterials Advances · doi:10.1016/j.bioadv.2022.212916 · Cited by 29
Engineering stem cell therapeutics for cardiac repair
Fang, J., Li, J. J., Zhong, X., Zhou, Y., Lee, R. J., Cheng, K., & Li, S. (2022) · Journal of Molecular and Cellular Cardiology · doi:10.1016/j.yjmcc.2022.06.013 · Cited by 30
Wu, C. A., Zhu, Y., Venkatesh, A., Stark, C. J., Lee, S. H., & Woo, Y.-P. J. (2023) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2022.0214 · Cited by 29
Multiscale embedded printing of engineered human tissue and organ equivalents
Zhang, C., Hua, W., Mitchell, K., Raymond, L., Delzendehrooy, F., Wen, L., Do, C., Chen, J., Yang, Y., Linke, G., et al. (2024) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2313464121 · Cited by 29
Biofabrication & cryopreservation of tissue engineered constructs for on-demand applications
Budharaju, H., Sundaramurthi, D., & Sethuraman, S. (2024) · Biofabrication · doi:10.1088/1758-5090/ad7906 · Cited by 29
Salem, T. T., Frankman, Z. D., & Churko, J. M. (2022) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2021.0088 · Cited by 28
Coaxial bioprinting vascular constructs: A review
Xu, H., Su, Y., Liao, Z., Liu, Z., Huang, X., Zhao, L., Duan, R., Hu, Y., Wei, Y., Lian, X., et al. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111549 · Cited by 27
Chen, Z., Huang, C., Liu, H., Han, X., Wang, Z., Li, S., Huang, J. S., & Wang, Z. (2023) · Bio-Design and Manufacturing · doi:10.1007/s42242-023-00251-5 · Cited by 27
Engineering the Cellular Microenvironment of Post-infarct Myocardium on a Chip
Khalil, N. N., & McCain, M. L. (2021) · Frontiers in Cardiovascular Medicine · doi:10.3389/fcvm.2021.709871 · Cited by 27
Central nervous system vascularization in human embryos and neural organoids
Boutom, S., Silva, T. P., Palecek, S. P., Shusta, E. V., Fernandes, T. G., & Ashton, R. S. (2024) · Cell Reports · doi:10.1016/j.celrep.2024.115068 · Cited by 27
Extrusion bioprinting: meeting the promise of human tissue biofabrication?
Holland, I. (2025) · Progress in Biomedical Engineering · doi:10.1088/2516-1091/adb254 · Cited by 26
Stimuli-responsive hybrid materials for 4D in vitro tissue models
Aizarna‐Lopetegui, U., Bittinger, S. C., Álvarez, N., Henriksen‐Lacey, M., & de Aberasturi, D. J. (2025) · Materials Today Bio · doi:10.1016/j.mtbio.2025.102035 · Cited by 28
Tackling Current Biomedical Challenges With Frontier Biofabrication and Organ-On-A-Chip Technologies
Celikkin, N., Presutti, D., Maiullari, F., Fornetti, E., Agarwal, T., Paradiso, A., Volpi, M., Święszkowski, W., Bearzi, C., Barbetta, A., et al. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.732130 · Cited by 26
Li, Y., Cheng, S., Shi, H., Yuan, R., Chen, G., Wang, Y., Zhang, Z., Deng, Z., & Huang, J. (2024) · Biofabrication · doi:10.1088/1758-5090/ad5b1b · Cited by 26
3D Bioprinting of Thick Adipose Tissues with Integrated Vascular Hierarchies
Goldfracht, I., Machour, M., Michael, I., Bulatova, M., Zavin, J., & Levenberg, S. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202410311 · Cited by 25
Aliyazdi, S., Frisch, S., Hidalgo, A., Frank, N. A., Krug, D., Müller, R., Schaefer, U. F., VOGT, T. M., Loretz, B., & Lehr, C. (2023) · Biofabrication · doi:10.1088/1758-5090/acd95e · Cited by 25
A critical review on advances and challenges of bioprinted cardiac patches
Zhang, X., Zhao, G., Ma, T., Simmons, C. A., & Santerre, J. P. (2024) · Acta Biomaterialia · doi:10.1016/j.actbio.2024.09.056 · Cited by 25
3D bioprinting vascular networks in suspension baths
Li, S., Jin, J., Zhang, C., Yang, X., Liu, Y., Lei, P., & Hu, Y. (2023) · Applied Materials Today · doi:10.1016/j.apmt.2022.101729 · Cited by 25
Dynamic mechanobiology of cardiac cells and tissues: Current status and future perspective
Wang, C., Ramahdita, G., Genin, G. M., Huebsch, N., & Ma, Z. (2023) · Biophysics Reviews · doi:10.1063/5.0141269 · Cited by 24
Advancing cardiac regeneration through 3D bioprinting: methods, applications, and future directions
Zheng, Z., Tang, W., Li, Y., Ai, Y., Tu, Z., Yang, J., & Fan, C. (2023) · Heart Failure Reviews · doi:10.1007/s10741-023-10367-6 · Cited by 25
3D bioprinting of dense cellular structures within hydrogels with spatially controlled heterogeneity
Abaci, A., & Güvendiren, M. (2024) · Biofabrication · doi:10.1088/1758-5090/ad52f1 · Cited by 24
Adak, N. C., & Lee, W. (2024) · Progress in Materials Science · doi:10.1016/j.pmatsci.2024.101377 · Cited by 24
Zeng, Q., Yang, Y., Wang, H., Tan, Y., Wang, Z., Chai, M., Lu, Z., He, S., Yang, H., Zhang, J. Z., et al. (2025) · Biomaterials · doi:10.1016/j.biomaterials.2025.123573 · Cited by 24
Thangadurai, M., Srinivasan, S. S., Sekar, M. P., Sethuraman, S., & Sundaramurthi, D. (2023) · Journal of Materials Chemistry B · doi:10.1039/d3tb01847d · Cited by 23
Singh, Y. P., Moses, J. C., Kim, M.-H., Gupta, D., Pal, V., Deniz, I. D., Gerhard, E. M., & Ozbolat, I. T. (2025) · Bioactive Materials · doi:10.1016/j.bioactmat.2025.11.024 · Cited by 22
Harnessing native blueprints for designing bioinks to bioprint functional cardiac tissue
Akter, M. Z., Tufail, F., Ahmad, A., Oh, Y. W., Kim, J. M., Kim, S., Hasan, M. M., Li, L., Lee, D., Kim, Y. S., et al. (2025) · iScience · doi:10.1016/j.isci.2025.111882 · Cited by 22
The Art of Engineering Biomimetic Cellular Microenvironments
Bretherton, R. C., & DeForest, C. A. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c01549 · Cited by 22
Sacrificial Templating for Accelerating Clinical Translation of Engineered Organs
Malkani, S., Prado, O., & Stevens, K. R. (2024) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.4c01824 · Cited by 21
Palma, J. H., Bertuola, M., & Hermida, É. B. (2024) · Bioprinting · doi:10.1016/j.bprint.2024.e00329 · Cited by 21
Why bioprinting in regenerative medicine should adopt a rational technology readiness assessment
O’Connell, C. D., Dalton, P. D., & Hutmacher, D. W. (2024) · Trends in biotechnology · doi:10.1016/j.tibtech.2024.03.006 · Cited by 21
Research Progress of Three-Dimensional Bioprinting Artificial Cardiac Tissue
Mao, X., & Wang, Z. (2022) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-022-00495-9 · Cited by 20
Nonplanar 3D Printing of Epoxy Using Freeform Reversible Embedding
Arun, N. D., Yang, H., Yao, L., & Feinberg, A. W. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202201542 · Cited by 20
Self-citationDroplet-based microfluidics for engineering shape-controlled hydrogels with stiffness gradient
Soliman, B. G., Chin, I. L., Li, Y., Ishii, M., Ho, M. H., Doan, V. K., Cox, T. R., Wang, P. Y., Lindberg, G. C. J., Zhang, Y. S., et al. (2024) · Biofabrication · doi:10.1088/1758-5090/ad6d8e · Cited by 20
Bakırcı, E., Adib, A. A., Ashraf, S. F., & Feinberg, A. W. (2025) · Biofabrication · doi:10.1088/1758-5090/adb7c3 · Cited by 21
Self-citationBioinspired design of a tissue-engineered ray with machine learning
Zimmerman, J. F., Drennan, D. J., Ikeda, J., Jin, Q., Ardoña, H. A. M., Kim, S. L., Ishii, R., & Parker, K. K. (2025) · Science Robotics · doi:10.1126/scirobotics.adr6472 · Cited by 19
Nested Biofabrication: Matryoshka‐Inspired Intra‐Embedded Bioprinting
Alioglu, M. A., Yilmaz, Y. O., Singh, Y. P., Nagamine, M., Celik, N., Kim, M. H., Pal, V., Gupta, D., & Ozbolat, I. T. (2023) · Small Methods · doi:10.1002/smtd.202301325 · Cited by 19
Singh, Y. P., Bandyopadhyay, A., Dey, S., Bhardwaj, N., & Mandal, B. B. (2024) · Progress in Biomedical Engineering · doi:10.1088/2516-1091/ad2d59 · Cited by 19
Zhou, K., Feng, M., Mao, H., & Gu, Z. (2022) · Biomaterials Science · doi:10.1039/d2bm00632d · Cited by 19
The Promise and Challenges of Bioprinting in Tissue Engineering
Martin, R., & Joung, D. (2024) · Micromachines · doi:10.3390/mi15121529 · Cited by 19
Wolfel, A., Johnbosco, C., Anspach, A., Meteling, M., Olijve, J., König, N. F., & Leijten, J. (2025) · Advanced Materials · doi:10.1002/adma.202501052 · Cited by 18
Volumetric bioprinting strategies for creating large-scale tissues and organs
Kim, D. S., Kang, D., Kim, D., & Jang, J. (2023) · MRS Bulletin · doi:10.1557/s43577-023-00541-4 · Cited by 18
Sokmen, S., Çakmak, S., & Öksüz, İ. (2024) · Biomedical Materials · doi:10.1088/1748-605x/ad3f60 · Cited by 18
Filament formation mechanisms in yield-stress fluid-enabled embedded ink writing
Hua, W., Zhang, C., Mitchell, K., Raymond, L., Coulter, R., Bandala, E. R., Zhao, D., & Jin, Y. (2024) · Additive manufacturing · doi:10.1016/j.addma.2024.104353 · Cited by 18
Low-temperature-field-assisted fabrication of cross-scale tissue engineering scaffolds
Ye, J., Zhou, X., Huang, Z., Zhang, X., Huang, W. D., Wu, B., & Zhou, H. (2024) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ad996d · Cited by 18
A Novel 3D‐Bioprinting Technology of Orderly Extruded Multi‐Materials via Photopolymerization
Negrete, J. A. T., Babayiğit, C., Najafikoshnoo, S., Lee, S. W., Boyraz, O., & Esfandyarpour, R. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202201926 · Cited by 18
3D biofabricated in vitro models as new approach methodologies for animal alternatives
Hua, W., & Gaharwar, A. K. (2026) · npj Biomedical Innovations. · doi:10.1038/s44385-026-00073-x · Cited by 19
In‐Foam Bioprinting: An Embedded Bioprinting Technique with Self‐Removable Support Bath
Madadian, E., Ravanbakhsh, H., Touani, F. K., Rahimnejad, M., Lerouge, S., & Ahmadi, A. (2024) · Small Science · doi:10.1002/smsc.202300280 · Cited by 17
FRESH-based 3D bioprinting of complex biological geometries using chitosan bioink
Chaurasia, P., Singh, R., & Mahto, S. K. (2024) · Biofabrication · doi:10.1088/1758-5090/ad5d18 · Cited by 17
Non-planar embedded 3D printing for complex hydrogel manufacturing
Albert, B. J., Wang, C., Williams, C. A., & Butcher, J. T. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00242 · Cited by 17
Li, Z., Takano, N., & Mizutani, M. (2023) · Precision Engineering · doi:10.1016/j.precisioneng.2023.06.006 · Cited by 16
High‐Resolution 3D Printing of Pancreatic Ductal Microanatomy Enabled by Serial Histology
Kiemen, A. L., Forjaz, A., Sousa, R., Han, K. S., Hruban, R. H., Wood, L. D., Wu, P., & Wirtz, D. (2024) · Advanced Materials Technologies · doi:10.1002/admt.202301837 · Cited by 16
Marino, S., Al-Hijailan, R. S., Alonaizan, R., Gabetti, S., Massai, D., & Pesce, M. (2025) · Gels · doi:10.3390/gels11080593 · Cited by 16
Current state and future of 3D bioprinted models for cardio-vascular research and drug development
Polonchuk, L., & Gentile, C. (2021) · ADMET & DMPK · doi:10.5599/admet.951 · Cited by 16
Classification of the emerging freeform three-dimensional printing techniques
Colly, A., Marquette, C. A., Frances, J.-M., & Courtial, E. (2022) · MRS Bulletin · doi:10.1557/s43577-022-00348-9 · Cited by 16
Additive manufacturing of electrically conductive polymers: a comprehensive review
Wiśniewska, P., Łepek, A., Ryl, J., & Yazdi, M. K. (2025) · Journal of Materials Chemistry C · doi:10.1039/d5tc02571k · Cited by 15
Overcoming big bottlenecks in vascular regeneration
Fantini, D. A., Yang, G., Khanna, A., Subramanian, D., Phillippi, J. A., & Huang, N. F. (2024) · Communications Biology · doi:10.1038/s42003-024-06567-x · Cited by 15
High‐Speed Embedded Ink Writing of Anatomic‐Size Organ Constructs
Hua, W., Zhang, C., Cui, H., Mitchell, K., Hensley, D. K., Chen, J., Do, C., Raymond, L., Coulter, R., Bandala, E. R., et al. (2025) · Advanced Science · doi:10.1002/advs.202405980 · Cited by 15
Alex, Y., Shanmugam, R., Salunkhe, S. S., & Čep, R. (2025) · REVIEWS ON ADVANCED MATERIALS SCIENCE · doi:10.1515/rams-2025-0109 · Cited by 15
Khaled Wassif, R., Daihom, B. A., & Maniruzzaman, M. (2024) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2024.124898 · Cited by 14
3D Printing of Soft Robotic Systems: Advances in Fabrication Strategies and Future Trends
Liu, C., Cui, B., Huang, X., Zheng, X. R., Vo‐Doan, T. T., & Qiao, R. (2025) · Advanced Robotics Research · doi:10.1002/adrr.202500076 · Cited by 13
Emerging Frontiers in Surgical Training: Progress in 3D Printed Gel Models
Yu, S., Xu, X., Ma, L., Cao, L., Mao, J., Chen, H., Zhang, J., & Wang, Z. (2023) · Journal of 3D Printing in Medicine · doi:10.2217/3dp-2023-0003 · Cited by 13
King, O., Sunyovszki, I., & Terracciano, C. M. (2021) · Pflügers Archiv - European Journal of Physiology · doi:10.1007/s00424-021-02557-8 · Cited by 13
Modeling Human Heart Development and Congenital Defects Using Organoids: How Close Are We?
Jiang, S., Feng, W. H., Chang, C. A., & Li, G. (2022) · Journal of Cardiovascular Development and Disease · doi:10.3390/jcdd9050125 · Cited by 12
3D-Bioprinted Cardiac Tissues and Their Potential for Disease Modeling
Perez, M. R., da Silva, V. A., Cortez, P. E., Joddar, B., & Willerth, S. M. (2023) · Journal of 3D Printing in Medicine · doi:10.2217/3dp-2022-0023 · Cited by 12
Biglino, G., Hopfner, C., Lindhardt, J. L., Moscato, F., Munuera, J., Oberoi, G. C., Tel, A., & Valls-Esteve, A. (2023) · 3D Printing in Medicine · doi:10.1186/s41205-022-00167-3 · Cited by 12
Surrogate-assisted multi-objective Bayesian optimization for improved rheological design of bioinks
Rane, A., Hart, S., Ramesh, S., & Deep, A. (2024) · Manufacturing Letters · doi:10.1016/j.mfglet.2024.09.167 · Cited by 11
Wang, C., Farrag, A., Jin, Y., & Zhou, Y. (2024) · Journal of Materials Science · doi:10.1007/s10853-023-09256-y · Cited by 11
Mazzaglia, C., Huang, Y. Y. S., & Shields, J. D. (2024) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2024.115485 · Cited by 10
Bioprinting vascularized skin analogs: a stepwise approach
Liu, L., Spessot, E., Lim, K. S., Wang, Z., Mithieux, S. M., Maniglio, D., Motta, A., & Weiss, A. S. (2025) · Burns & Trauma · doi:10.1093/burnst/tkaf018 · Cited by 11
Sun, W., & Webster‐Wood, V. A. (2022) · Materials Today Proceedings · doi:10.1016/j.matpr.2022.09.272 · Cited by 10
Milla, A. E. F., DeMaria, W., Wells, D., Jeon, O., Alsberg, E., & Rolle, M. W. (2024) · Biofabrication · doi:10.1088/1758-5090/ad6d8f · Cited by 10
Freeform liquid 3D printing of hydraulically enhanced dielectric actuators
Calais, T., Ugalde, A. C., Chooi, A., & y Alvarado, P. V. (2022) · Materials Today Proceedings · doi:10.1016/j.matpr.2022.08.549 · Cited by 10
Focused rotary jet spinning: A novel fiber technology for heart biofabrication
Liu, M., Lin, Z., Wang, X., & Yan, W. (2022) · Matter · doi:10.1016/j.matt.2022.08.013 · Cited by 10
Medical embryology and regenerative medicine: research and applications in clinical practice
Soczyńska, J., Gawełczyk, W., Obrycka, P., Żołyniak, M., Muzyka, A., Majcherczyk, K., Papierkowska, J., & Woźniak, S. (2025) · Frontiers in Cell and Developmental Biology · doi:10.3389/fcell.2025.1619036 · Cited by 9
Spagnuolo, F. D., Kronemberger, G. S., & Kelly, D. A. (2026) · Advanced Science · doi:10.1002/advs.202509313 · Cited by 9
The role of innovative modeling and imaging techniques in improving outcomes in patients with LVAD
Wilson, S. I., Ingram, K. E., Oh, A., Moreno, M. R., & Kassi, M. (2023) · Frontiers in Cardiovascular Medicine · doi:10.3389/fcvm.2023.1248300 · Cited by 9
Bhardwaj, N., Dey, S., Bhar, B., & Mandal, B. B. (2023) · Progress in Biomedical Engineering · doi:10.1088/2516-1091/ad10b4 · Cited by 9
Open-source extrusion 3D bioprinters: Trends and recommendations
Crosby, C. O. (2024) · Bioprinting · doi:10.1016/j.bprint.2024.e00336 · Cited by 9
Gel-Based Suspension Medium Used in 3D Bioprinting for Constructing Tissue/Organ Analogs
Luo, Y., Xu, R., Hu, Z., Ni, R., Zhu, T., Zhang, H., & Zhu, Y. (2024) · Gels · doi:10.3390/gels10100644 · Cited by 9
Suspended Tissue Open Microfluidic Patterning (STOMP)
Haack, A. J., Brown, L. G., Goldstein, A. J., Mulimani, P. S., Berthier, J., Viswanathan, A. R., Kopyeva, I., Whitten, J. M., Lin, A., Nguyen, S. H., et al. (2025) · Advanced Science · doi:10.1002/advs.202501148 · Cited by 9
Understanding and Engineering the Pulmonary Vasculature
Ng, W. H., Varghese, B., & Ren, X. (2023) · Advances in experimental medicine and biology · doi:10.1007/978-3-031-26625-6_12 · Cited by 9
Cardiac Regeneration: the Heart of the Issue
Carotenuto, F., Manzari, V., & Nardo, P. D. (2021) · Current Transplantation Reports · doi:10.1007/s40472-021-00319-0 · Cited by 9
Soft-tissue-mimicking using silicones for the manufacturing of soft phantoms by fresh 3D printing
Tejo‐Otero, A., Colly, A., Courtial, E., Fenollosa-Artés, F., Buj-Corral, I., & Marquette, C. A. (2021) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2021-0079 · Cited by 9
Accolla, R. P., Simmons, A., & Stabler, C. L. (2022) · Advanced Healthcare Materials · doi:10.1002/adhm.202200243 · Cited by 9
3D puzzle-inspired construction of large and complex organ structures for tissue engineering
Xie, Z., Zeng, J., Miyagawa, S., Sawa, Y., & Matsusaki, M. (2023) · Materials Today Bio · doi:10.1016/j.mtbio.2023.100726 · Cited by 8
Stola, G. P., Paoletti, C., Nicoletti, L., Paul, G., Cassino, C., Marchese, L., Chiono, V., & Marcello, E. (2024) · International Journal of Bioprinting · doi:10.36922/ijb.4014 · Cited by 8
Matavosian, A. A., Griffin, A. C., Bhuiyan, D. B., Lyness, A. M., Bhatnagar, V., & Bonassar, L. J. (2025) · Biofabrication · doi:10.1088/1758-5090/adb4a4 · Cited by 8
Kotani, T., Hananouchi, T., & Sakai, S. (2025) · Biomedical Materials · doi:10.1088/1748-605x/adc0d6 · Cited by 8
Morita, T., Watanabe, S., & Sasaki, S. (2022) · Precision Engineering · doi:10.1016/j.precisioneng.2022.09.004 · Cited by 8
Kant, R. J., Dwyer, K. D., Lee, J.-H., Polucha, C., Kobayashi, M., Pyon, S., Soepriatna, A. H., Lee, J., & Coulombe, K. L. K. (2023) · Cells · doi:10.3390/cells12131698 · Cited by 8
Recent frontiers in biofabrication for respiratory tissue engineering
Zimmerling, A., Dahlan, N. A., Zhou, Y., & Chen, D. (2024) · Bioprinting · doi:10.1016/j.bprint.2024.e00342 · Cited by 8
Mufarrih, S. H., Mahmood, F. U., Qureshi, N. Q., Yunus, R. A., Quraishi, I., Baribeau, V., Sharkey, A. M., Matyal, R., & Khabbaz, K. R. (2021) · Journal of Cardiothoracic and Vascular Anesthesia · doi:10.1053/j.jvca.2021.09.012 · Cited by 8
Kabuye, E., LeDuc, P. R., & Cagan, J. (2023) · Virtual Reality · doi:10.1007/s10055-023-00777-0 · Cited by 8
Prasetyaningrum, P. W., Mubarok, W., Kotani, T., & Sakai, S. (2025) · Bioprinting · doi:10.1016/j.bprint.2025.e00439 · Cited by 7
Computational Modeling Meets 3D Bioprinting: Emerging Synergies in Cardiovascular Disease Modeling
Mukherjee, T., Amoli, M. S., Rezapourdamanab, S., Shammas, L. R. E., Tomov, M. L., Mendiola, E. A., Serpooshan, V., & Avazmohammadi, R. (2026) · Advanced Healthcare Materials · doi:10.1002/adhm.202503034 · Cited by 8
Metadata
- Authors
- Mirdamadi, E., Tashman, J. W., Shiwarski, D. J., Palchesko, R. N., & Feinberg, A. W.
- Affiliations
- Carnegie Mellon University (US)
- Corresponding author
- Feinberg, Adam W.
- Venue
- ACS Biomaterials Science & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-10-23
- Volume
- 6
- Issue
- 11
- Pages
- 6453-6459
- ISSN
- 2373-9878 (ISSN-L)
- OpenAlex
- W3093984226
- Cited by
- 292
- References
- 27
- Citations by year
- 2026: 28 · 2025: 48 · 2024: 59 · 2023: 54 · 2022: 54 · 2021: 48 · 2020: 1
- FWCI
- 12.32
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- ACS Biomaterials Science & Engineering (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Office of Naval Research (N000141712566)
- U.S. Food and Drug Administration (R01FD006582)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Physical Sciences › Engineering › Biomedical Engineering › Anatomy and Medical Technology
- Keywords
- 3D bioprinting, alginate hydrogel, surgical training, tunable mechanical properties
- MeSH terms
- Alginates, Humans, Hydrogels, Tissue Scaffolds, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.