FRESH 3D Bioprinting a Full-Size Model of the Human Heart
The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Abstract
Recent advances in embedded three-dimensional (3D) bioprinting have expanded the design space for fabricating geometrically complex tissue scaffolds using hydrogels with mechanical properties comparable to native tissues and organs in the human body. The advantage of approaches such as Freeform Reversible Embedding of Suspended Hydrogels (FRESH) printing is the ability to embed soft biomaterials in a thermoreversible support bath at sizes ranging from a few millimeters to centimeters. In this study, we were able to expand this printable size range by FRESH bioprinting a full-size model of an adult human heart from patient-derived magnetic resonance imaging (MRI) data sets. We used alginate as the printing biomaterial to mimic the elastic modulus of cardiac tissue. In addition to achieving high print fidelity on a low-cost printer platform, FRESH-printed alginate proved to create mechanically tunable and suturable models. This demonstrates that large-scale 3D bioprinting of soft hydrogels is possible using FRESH and that cardiac tissue constructs can be produced with potential future applications in surgical training and planning.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Printing the ECM components at current resolutions (~250 μm feature sizes) takes hours to days (22), but at native feature sizes (1 μm) could take hundreds of years if current scaling trends are followed (eq. S1).”
From Recreating the heart's helical structure-function relationship with focused rotary jet spinning (2022) · cites this paper as [22]
In the citing paper
“Although full-size anatomical models have previously been produced with thermoplastics and hydrogels (22), these systems typically lack the micrometer-scale features needed to direct myocyte alignment.”
From Recreating the heart's helical structure-function relationship with focused rotary jet spinning (2022) · cites this paper as [22]
Citations
Cites
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
Self-citation3D bioprinting of collagen to rebuild components of the human heart
Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W. (2019) · Science · doi:10.1126/science.aav9051 · Cited by 1,782
Self-citation3D printing based on imaging data: review of medical applications
Rengier, F., Mehndiratta, A., von Tengg-Kobligk, H., Zechmann, C. M., Unterhinninghofen, R., Kauczor, H.-U., & Giesel, F. L. (2010) · International Journal of Computer Assisted Radiology and Surgery · doi:10.1007/s11548-010-0476-x · Cited by 1,584
Kuo, C. K., & Ma, P. X. (2001) · Biomaterials · doi:10.1016/s0142-9612(00)00201-5 · Cited by 1,491
Indentation Versus Tensile Measurements of Young's Modulus for Soft Biological Tissues
McKee, C. T., Last, J. A., Russell, P., & Murphy, C. J. (2011) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2010.0520 · Cited by 708
Boontheekul, T., Kong, H.-J., & Mooney, D. J. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.06.044 · Cited by 659
Gao, T., Gillispie, G. J., Copus, J. S., PR, A. K., Seol, Y.-J., Atala, A., Yoo, J. J., & Lee, S. J. (2018) · Biofabrication · doi:10.1088/1758-5090/aacdc7 · Cited by 510
3D Printing PDMS Elastomer in a Hydrophilic Support Bath via Freeform Reversible Embedding
Hinton, T. J., Hudson, A., Pusch, K., Lee, A., & Feinberg, A. W. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00170 · Cited by 437
Self-citationEngler, A. J., Richert, L., Wong, J. Y., Picart, C., & Discher, D. E. (2004) · Surface Science · doi:10.1016/j.susc.2004.06.179 · Cited by 370
Filippou, V., & Tsoumpas, C. (2018) · Medical Physics · doi:10.1002/mp.13058 · Cited by 313
Research works printed but not linked: 1
- 10.9790/9622-0710021619 · doi:10.9790/9622-0710021619
Cited by
Mohanty, A. K., Wu, F., Mincheva, R., Hakkarainen, M., Raquez, J.-M., Mielewski, D. F., Narayan, R., Netravali, A. N., & Misra, M. (2022) · Nature Reviews Methods Primers · doi:10.1038/s43586-022-00124-8 · Cited by 355
Advances in 3D bioprinting of tissues/organs for regenerative medicine and in-vitro models
Jain, P., Kathuria, H., & Dubey, N. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2022.121639 · Cited by 237
Emergence of FRESH 3D printing as a platform for advanced tissue biofabrication
Shiwarski, D. J., Hudson, A. R., Tashman, J. W., & Feinberg, A. W. (2021) · APL Bioengineering · doi:10.1063/5.0032777 · Cited by 216
Self-citationHydrogels for Tissue Engineering: Addressing Key Design Needs Toward Clinical Translation
Xu, F., Dawson, C., Lamb, M., Mueller, E., Stefanek, E., Akbari, M., & Hoare, T. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.849831 · Cited by 209
Budharaju, H., Sundaramurthi, D., & Sethuraman, S. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.10.012 · Cited by 201
Current standards and ethical landscape of engineered tissues—3D bioprinting perspective
Sekar, M. P., Budharaju, H., Zennifer, A., Sethuraman, S., Vermeulen, N., Sundaramurthi, D., & Kalaskar, D. M. (2021) · Journal of Tissue Engineering · doi:10.1177/20417314211027677 · Cited by 195
Wei, Q., Zhou, J., An, Y., Li, M., Zhang, J., & Yang, S. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.123450 · Cited by 184
3D bioprinting: current status and trends—a guide to the literature and industrial practice
Santoni, S., Gugliandolo, S. G., Sponchioni, M., Moscatelli, D., & Colosimo, B. M. (2022) · Bio-Design and Manufacturing · doi:10.1007/s42242-021-00165-0 · Cited by 167
Passive myocardial mechanical properties: meaning, measurement, models
Emig, R., Zgierski-Johnston, C. M., Timmermann, V., Taberner, A. J., Nash, M. P., Köhl, P., & Peyronnet, R. (2021) · Biophysical Reviews · doi:10.1007/s12551-021-00838-1 · Cited by 152
Fatigue and impact properties of 3D printed PLA reinforced with kenaf particles
Shahar, F. S., Sultan, M. T. H., Safri, S. N. A., Jawaid, M., Talib, A. R. A., Basri, A. A., & Shah, A. U. M. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.12.023 · Cited by 141
Ng, W. L., An, J., & Chua, C. K. (2024) · Engineering · doi:10.1016/j.eng.2024.01.028 · Cited by 141
Recreating the heart's helical structure-function relationship with focused rotary jet spinning
Chang, H., Liu, Q., Zimmerman, J. F., Lee, K. Y., Jin, Q., Peters, M. M., Rosnach, M., Choi, S., Kim, S. L., Ardoña, H. A. M., et al. (2022) · Science · doi:10.1126/science.abl6395 · Cited by 131
Prondzynski, M., Berkson, P., Trembley, M. A., Tharani, Y., Shani, K., Bortolin, R. H., Sweat, M., Mayourian, J., Yücel, D., Cordoves, A. M., et al. (2024) · Nature Communications · doi:10.1038/s41467-024-50224-0 · Cited by 123
Engineered assistive materials for 3D bioprinting: support baths and sacrificial inks
Brunel, L. G., Hull, S. M., & Heilshorn, S. C. (2022) · Biofabrication · doi:10.1088/1758-5090/ac6bbe · Cited by 119
Bertassoni, L. E. (2021) · Advanced Materials · doi:10.1002/adma.202101321 · Cited by 103
Biomanufacturing human tissues via organ building blocks
Wolf, K. J., Weiss, J. D., Uzel, S. G. M., Skylar‐Scott, M. A., & Lewis, J. A. (2022) · Cell stem cell · doi:10.1016/j.stem.2022.04.012 · Cited by 102
Embedded bioprinting for designer 3D tissue constructs with complex structural organization
Zeng, X., Meng, Z., He, J., Mao, M., Li, X., Chen, P., Fan, J., & Li, D. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.11.048 · Cited by 95
Algal polysaccharides for 3D printing: A review
Mandal, S., Nagi, G. K., Corcoran, A. A., Agrawal, R., Dubey, M. K., & Hunt, R. W. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.120267 · Cited by 95
Lv, T., Chen, Y., Li, N., Liao, X., Heng, Y., Guo, Y., & Hu, K. (2025) · Gels · doi:10.3390/gels11070544 · Cited by 89
Capella-Monsonís, H., Crum, R. J., Hussey, G. S., & Badylak, S. F. (2024) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2024.115347 · Cited by 84
3D Bioprinting of In Vitro Models Using Hydrogel-Based Bioinks
Choi, Y., Park, H., Ha, D., Yun, H., Yi, H., & Lee, H. (2021) · Polymers · doi:10.3390/polym13030366 · Cited by 84
Bioengineering approaches to treat the failing heart: from cell biology to 3D printing
Yadid, M., Oved, H., Silberman, E., & Dvir, T. (2022) · Nature Reviews Cardiology · doi:10.1038/s41569-021-00603-7 · Cited by 83
Bioprinting Methods for Fabricating In Vitro Tubular Blood Vessel Models
Kim, S. J., Kim, M.-G., Kim, J., Jeon, J. S., Park, J., & Yi, H. (2023) · Cyborg and Bionic Systems · doi:10.34133/cbsystems.0043 · Cited by 83
3D-bioprinted cancer-on-a-chip: level-up organotypic in vitro models
Monteiro, M. V., Zhang, Y. S., Gaspar, V. M., & Mano, J. F. (2021) · Trends in biotechnology · doi:10.1016/j.tibtech.2021.08.007 · Cited by 82
Hydrogels for 3D embedded bioprinting: a focused review on bioinks and support baths
Zhou, K., Sun, Y., Yang, J., Mao, H., & Gu, Z. (2022) · Journal of Materials Chemistry B · doi:10.1039/d1tb02554f · Cited by 82
3D Bioprinting of Human Hollow Organs
Panja, N., Maji, S., Choudhuri, S., Ali, K. A., & Hossain, C. M. (2022) · AAPS PharmSciTech · doi:10.1208/s12249-022-02279-9 · Cited by 83
3D bioprinting advanced biomaterials for craniofacial and dental tissue engineering – A review
Xu, H., Zhang, Y., Zhang, Y., Zhao, Z., Xue, T., Wang, J., Li, M., Zhao, S., Zhang, H., & Ding, Y. (2024) · Materials & Design · doi:10.1016/j.matdes.2024.112886 · Cited by 83
Agarwal, T., Onesto, V., Banerjee, D., Guo, S., Polini, A., Vogt, C. D., Viswanath, A., Esworthy, T. J., Cui, H., O'Donnell, A., et al. (2025) · Biofabrication · doi:10.1088/1758-5090/ade47a · Cited by 80
FRESH 3D bioprinting a contractile heart tube using human stem cell-derived cardiomyocytes
Bliley, J. M., Tashman, J. W., Stang, M. A., Coffin, B. D., Shiwarski, D. J., Lee, A. R., Hinton, T. J., & Feinberg, A. W. (2022) · Biofabrication · doi:10.1088/1758-5090/ac58be · Cited by 77
Self-citation3D Bioprinting of Novel κ-Carrageenan Bioinks: An Algae-Derived Polysaccharide
Marques, D. M. C., Silva, J. C., Serro, A. P., Cabral, J. M. S., Sanjuan‐Alberte, P., & Ferreira, F. C. (2022) · Bioengineering · doi:10.3390/bioengineering9030109 · Cited by 76
3D bioprinting: Materials, processes, and applications
Bártolo, P., Malshe, A. P., Ferraris, E., & Koç, B. (2022) · CIRP Annals · doi:10.1016/j.cirp.2022.06.001 · Cited by 77
Fluid Bath-Assisted 3D Printing for Biomedical Applications: From Pre- to Postprinting Stages
Hua, W., Mitchell, K., Raymond, L., Godina, B., Zhao, D., Zhou, W., & Jin, Y. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.1c00910 · Cited by 74
Development of a high-performance open-source 3D bioprinter
Tashman, J. W., Shiwarski, D. J., & Feinberg, A. W. (2022) · Scientific Reports · doi:10.1038/s41598-022-26809-4 · Cited by 74
Self-citationRecent advances in bioprinting technologies for engineering hepatic tissue
Agarwal, T., Banerjee, D., Konwarh, R., Esworthy, T., Kumari, J., Onesto, V., Das, P., Lee, B. H., Wagener, F. A. D. T. G., Makvandi, P., et al. (2021) · Materials Science and Engineering: C · doi:10.1016/j.msec.2021.112013 · Cited by 66
Tashman, J. W., Shiwarski, D. J., Coffin, B. D., Ruesch, A., Lanni, F., Kainerstorfer, J. M., & Feinberg, A. W. (2022) · Biofabrication · doi:10.1088/1758-5090/ac975e · Cited by 74
Self-citation3D-bioprinted human tissue and the path toward clinical translation
Bliley, J. M., Shiwarski, D. J., & Feinberg, A. W. (2022) · Science Translational Medicine · doi:10.1126/scitranslmed.abo7047 · Cited by 74
Self-citationCollagen-based bioinks for regenerative medicine: Fabrication, application and prospective
Li, Z., Ruan, C., & Niu, X. (2023) · Medicine in Novel Technology and Devices · doi:10.1016/j.medntd.2023.100211 · Cited by 72
Recent advances in bioprinting technologies for engineering cardiac tissue
Agarwal, T., Fortunato, G. M., Hann, S.-Y., Ayan, B., Vajanthri, K. Y., Presutti, D., Cui, H., Chan, A., Costantini, M., Onesto, V., et al. (2021) · Materials Science and Engineering C · doi:10.1016/j.msec.2021.112057 · Cited by 71
Embedded 3D Printing of Multimaterial Polymer Lattices via Graph‐Based Print Path Planning
Weeks, R. D., Truby, R. L., Uzel, S. G. M., & Lewis, J. A. (2022) · Advanced Materials · doi:10.1002/adma.202206958 · Cited by 70
Sun, W., Williamson, A. S., Sukhnandan, R., Majidi, C., Yao, L., Feinberg, A. W., & Webster‐Wood, V. A. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202303659 · Cited by 71
Self-citationDevelopments of additive manufacturing and 5D printing in tissue engineering
Lai, J., & Wang, M. (2023) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/s43578-023-01193-5 · Cited by 68
Progress in Organ Bioprinting for Regenerative Medicine
Wang, X. S., Zhang, D., Singh, Y. P., Yeo, M., Deng, G., Lai, J., Chen, F., Ozbolat, I. T., & Yu, Y. (2024) · Engineering · doi:10.1016/j.eng.2024.04.023 · Cited by 69
Bioinks for 3D Bioprinting: A Scientometric Analysis of Two Decades of Progress
Pedroza-González, S. C., Rodríguez-Salvador, M., Pérez-Benítez, B. E., Álvarez, M. M., & Santiago, G. T. (2021) · International Journal of Bioprinting · doi:10.18063/ijb.v7i2.337 · Cited by 67
Tashman, J. W., Shiwarski, D. J., & Feinberg, A. W. (2021) · HardwareX · doi:10.1016/j.ohx.2020.e00170 · Cited by 67
Self-citationSun, W., Schaffer, S., Dai, K., Yao, L., Feinberg, A. W., & Webster‐Wood, V. A. (2021) · Frontiers in Robotics and AI · doi:10.3389/frobt.2021.673533 · Cited by 61
Self-citationRecent Trends and Future Directions in 3D Printing of Biocompatible Polymers
Aftab, M., Ikram, S., Ullah, M., Khan, N., Naeem, M., Khan, M. A., o’g’li, R. B. B., Qizi, K. S. S., Ugli, O. O. E., Abdurasulovna, B. M., et al. (2025) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp9040129 · Cited by 61
Glycosaminoglycans: From Vascular Physiology to Tissue Engineering Applications
Lepedda, A. J., Nieddu, G., Formato, M., Baker, M. B., Fernández‐Pérez, J., & Moroni, L. (2021) · Frontiers in Chemistry · doi:10.3389/fchem.2021.680836 · Cited by 60
Recent progress of 3D printed vascularized tissues and organs
Zheng, K., Chai, M., Luo, B., Cheng, K., Wang, Z., Li, N., & Shi, X. (2024) · Smart Materials in Medicine · doi:10.1016/j.smaim.2024.01.001 · Cited by 60
3D Bioprinted Patient‐Specific Extracellular Matrix Scaffolds for Soft Tissue Defects
Behre, A., Tashman, J. W., Dikyol, C., Shiwarski, D. J., Crum, R. J., Johnson, S. A., Kommeri, R., Hussey, G. S., Badylak, S. F., & Feinberg, A. W. (2022) · Advanced Healthcare Materials · doi:10.1002/adhm.202200866 · Cited by 58
Self-citationHernández-Sosa, A., Ramírez-Jiménez, R. A., Rojo, L., Boulmedais, F., Aguilar, M. R., Criado‐Gonzalez, M., & Hernández, R. (2022) · Polymers · doi:10.3390/polym14112229 · Cited by 56
Polysaccharide‐based biomaterials in a journey from 3D to 4D printing
Shokrani, H., Shokrani, A., Seidi, F., Mashayekhi, M., Kar, S., Nedeljković, D., Kuang, T., Saeb, M. R., & Mozafari, M. (2023) · Bioengineering & Translational Medicine · doi:10.1002/btm2.10503 · Cited by 55
Tao, R., Granier, F., & Therriault, D. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.103243 · Cited by 53
Fabrication and Characterization Techniques of In Vitro 3D Tissue Models
Shyam, R., Reddy, L. V. K., & Palaniappan, A. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms24031912 · Cited by 52
Ketabat, F., Maris, T., Duan, X., Yazdanpanah, Z., Kelly, M., Badea, I., & Chen, D. (2023) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2023.1161804 · Cited by 51
Applications of Light-Based 3D Bioprinting and Photoactive Biomaterials for Tissue Engineering
Zhang, X., Zhang, X., Li, Y., & Zhang, Y. (2023) · Materials · doi:10.3390/ma16237461 · Cited by 51
Advancements in Tissue Engineering: A Review of Bioprinting Techniques, Scaffolds, and Bioinks
Zoghi, S. (2024) · Biomedical Engineering and Computational Biology · doi:10.1177/11795972241288099 · Cited by 51
Birman, T., & Seliktar, D. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202100628 · Cited by 50
Computational Modeling and Experimental Characterization of Extrusion Printing into Suspension Baths
Prendergast, M. E., & Burdick, J. A. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202101679 · Cited by 49
Patient-Specific 3D-Printed Models in Pediatric Congenital Heart Disease
Sun, Z. (2023) · Children · doi:10.3390/children10020319 · Cited by 48
Soft Hydrogel Shapeability via Supportive Bath Matching in Embedded 3D Printing
Lei, I. M., Zhang, D., Gu, W., Liu, J., Zi, Y., & Huang, Y. Y. S. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202300001 · Cited by 47
Freeform Liquid 3D Printing of Soft Functional Components for Soft Robotics
Calais, T., Sanandiya, N. D., Jain, S., Kanhere, E. V., Kumar, S., Yeow, C., & y Alvarado, P. V. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c20209 · Cited by 46
Orr, A., Kalantarnia, F., Nazir, S., Bolandi, B., Alderson, D., O’Grady, K., Hoorfar, M., Julian, L. M., & Willerth, S. M. (2025) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2025.115524 · Cited by 45
Krishna, D. V., & Sankar, M. R. (2023) · Materials Today Communications · doi:10.1016/j.mtcomm.2023.105696 · Cited by 45
Advances in Three Dimensional Bioprinting for Wound Healing: A Comprehensive Review
Umur, E., Bayrak, E., Arslan, F., Bulut, S. B., Baysoy, E., Kaleli‐Can, G., & Ayan, B. (2023) · Applied Sciences · doi:10.3390/app131810269 · Cited by 43
Advances in 3D Bioprinted Cardiac Tissue Using Stem Cell-Derived Cardiomyocytes
Bliley, J. M., Stang, M. A., Behre, A., & Feinberg, A. W. (2024) · Stem Cells Translational Medicine · doi:10.1093/stcltm/szae014 · Cited by 44
Self-citationHwang, D. G., Choi, H., Yong, U., Kim, D., Kang, W., Park, S., & Jang, J. (2024) · Advanced Materials · doi:10.1002/adma.202400364 · Cited by 43
Immune response against the biomaterials used in 3D bioprinting of organs
Elalouf, A. (2021) · Transplant Immunology · doi:10.1016/j.trim.2021.101446 · Cited by 43
Medical 3D Printing: Tools and Techniques, Today and Tomorrow
Willson, K., & Atala, A. (2022) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-092220-015404 · Cited by 43
3D bioprinting: novel approaches for engineering complex human tissue equivalents and drug testing
Hagenbuchner, J., Nothdurfter, D., & Ausserlechner, M. J. (2021) · Essays in Biochemistry · doi:10.1042/ebc20200153 · Cited by 42
Gerdes, S., Ramesh, S., Mostafavi, A., Tamayol, A., Rivero, I. V., & Rao, P. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.1c00598 · Cited by 43
FRESH bioprinting of biodegradable chitosan thermosensitive hydrogels
Rahimnejad, M., Adoungotchodo, A., Demarquette, N. R., & Lerouge, S. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00209 · Cited by 42
Resolution of 3D bioprinting inside bulk gel and granular gel baths
Xie, Z., Kang, D., & Matsusaki, M. (2021) · Soft Matter · doi:10.1039/d1sm00926e · Cited by 41
Khanna, A., Ayan, B., Undieh, A. A., Yang, Y., & Huang, N. F. (2022) · Journal of Molecular and Cellular Cardiology · doi:10.1016/j.yjmcc.2022.04.017 · Cited by 42
Bioprinting-assisted tissue assembly to generate organ substitutes at scale
Jo, Y., Hwang, D. G., Kim, M., Yong, U., & Jang, J. (2022) · Trends in biotechnology · doi:10.1016/j.tibtech.2022.07.001 · Cited by 41
Advantage of Alginate Bioinks in Biofabrication for Various Tissue Engineering Applications
Datta, S. (2023) · International Journal of Polymer Science · doi:10.1155/2023/6661452 · Cited by 41
Fang, Y., Sun, W., Zhang, T., & Xiong, Z. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2021.121298 · Cited by 40
Recycling 3D Printed Residues for the Development of Disposable Paper-Based Electrochemical Sensors
Silva‐Neto, H. A., Duarte‐Junior, G. F., Rocha, D. S., Fethi Bedioui, A., Varenne, A., & Coltro, W. K. T. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c00370 · Cited by 40
Kim, M. S., Choi, Y., & Lee, K. Y. (2025) · Polymers · doi:10.3390/polym17172337 · Cited by 39
Cell sedimentation during 3D bioprinting: a mini review
Xu, H., Liu, J., Zhang, Z., & Xu, C. (2022) · Bio-Design and Manufacturing · doi:10.1007/s42242-022-00183-6 · Cited by 39
Fabrication of 3D GelMA Scaffolds Using Agarose Microgel Embedded Printing
Yang, B., Liu, T., Gao, G., Zhang, X., & Wu, B. (2022) · Micromachines · doi:10.3390/mi13030469 · Cited by 39
Wu, Y. B., Yang, X., Gupta, D., Alioglu, M. A., Qin, M., Özbolat, V., Li, Y., & Ozbolat, I. T. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202313088 · Cited by 38
Decellularized Cell‐Secreted Extracellular Matrices as Biomaterials for Tissue Engineering
Ramos‐Rodriguez, D. H., & Leach, J. K. (2024) · Small Science · doi:10.1002/smsc.202400335 · Cited by 38
Engineering Three-Dimensional Vascularized Cardiac Tissues
Williams, M. A. C., Mair, D. B., Lee, W., Lee, E., & Kim, D. (2021) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2020.0343 · Cited by 39
3D Bioprinting of Nature-Inspired Hydrogel Inks Based on Synthetic Polymers
Kumar, S., Tharayil, A., & Thomas, S. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.1c00567 · Cited by 38
Chen, S., Tomov, M. L., Ning, L., Gil, C. J., Hwang, B., Bauser‐Heaton, H. D., Chen, H., & Serpooshan, V. (2023) · Advanced Biology · doi:10.1002/adbi.202300124 · Cited by 38
Sacrificial biomaterials in 3D fabrication of scaffolds for tissue engineering applications
Wang, C., & Zhou, Y. (2023) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.35312 · Cited by 38
Hughes, A. M., Kolb, A. D., Shupp, A. B., Shine, K. M., & Bussard, K. M. (2021) · Cancers · doi:10.3390/cancers13030507 · Cited by 37
Cardiovascular 3D bioprinting: A review on cardiac tissue development
Kalhori, D., Zakeri, N., Zafar-Jafarzadeh, M., Moroni, L., & Solati‐Hashjin, M. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00221 · Cited by 37
Application of 3D Bioprinting in Liver Diseases
Li, W., Liu, Z., Tang, F., Jiang, H., Zhou, Z., Hao, X., & Zhang, J. (2023) · Micromachines · doi:10.3390/mi14081648 · Cited by 37
Kim, J., Lee, H., Lee, G., Ryu, D., & Kim, G. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2024.02.020 · Cited by 36
Budharaju, H., Singh, R. K., & Kim, H. (2025) · Bioactive Materials · doi:10.1016/j.bioactmat.2025.07.006 · Cited by 35
A versatile embedding medium for freeform bioprinting with multi-crosslinking methods
Li, Q., Jiang, Z., Ma, L., Yin, J., Gao, Z., Shen, L., Yang, H., Cui, Z., Ye, H., & Zhou, H. (2022) · Biofabrication · doi:10.1088/1758-5090/ac7909 · Cited by 35
Yücer, S., Sarac, B., & Çiftçi, F. (2025) · Bioengineering & Translational Medicine · doi:10.1002/btm2.70080 · Cited by 34
A hackable, multi-functional, and modular extrusion 3D printer for soft materials
Lei, I. M., Sheng, Y., Lei, C. L., Leow, C., & Huang, Y. Y. S. (2022) · Scientific Reports · doi:10.1038/s41598-022-16008-6 · Cited by 34
Zhu, Y., Stark, C. J., Madira, S., Ethiraj, S., Venkatesh, A., Anilkumar, S., Jung, J., Lee, S. H., Wu, C. A., Walsh, S. K., et al. (2022) · Bioengineering · doi:10.3390/bioengineering9120807 · Cited by 34
Multiscale porosity in a 3D printed gellan–gelatin composite for bone tissue engineering
Gupta, D., Vashisth, P., & Bellare, J. R. (2021) · Biomedical Materials · doi:10.1088/1748-605x/abf1a7 · Cited by 33
Kumar, S. (2021) · Materials Advances · doi:10.1039/d1ma00525a · Cited by 33
Mousavi, A., Hedayatnia, A., Vliet, P. P. V., Dartora, D. R., Wong, N., Rafatian, N., Nuyt, A. M., Moraes, C., Ajji, A., Andelfinger, G., et al. (2023) · Applied Materials Today · doi:10.1016/j.apmt.2023.102035 · Cited by 34
Salih, T., Caputo, M., & Ghorbel, M. T. (2024) · Biomolecules · doi:10.3390/biom14070861 · Cited by 32
Golunova, A. S., Velychkivska, N., Mikšovská, Z., Chochola, V., Jaroš, J., Hampl, A., Pop‐Georgievski, O., & Proks, V. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms22115731 · Cited by 32
Metadata
- Authors
- Mirdamadi, E., Tashman, J. W., Shiwarski, D. J., Palchesko, R. N., & Feinberg, A. W.
- Affiliations
- Carnegie Mellon University (US)
- Corresponding author
- Feinberg, Adam W.
- Venue
- ACS Biomaterials Science & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-10-23
- Volume
- 6
- Issue
- 11
- Pages
- 6453-6459
- ISSN
- 2373-9878 (ISSN-L)
- OpenAlex
- W3093984226
- Cited by
- 292
- References
- 27
- Citations by year
- 2026: 28 · 2025: 48 · 2024: 59 · 2023: 54 · 2022: 54 · 2021: 48 · 2020: 1
- FWCI
- 12.32
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- ACS Biomaterials Science & Engineering (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Office of Naval Research (N000141712566)
- U.S. Food and Drug Administration (R01FD006582)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Physical Sciences › Engineering › Biomedical Engineering › Anatomy and Medical Technology
- Keywords
- 3D bioprinting, alginate hydrogel, surgical training, tunable mechanical properties
- MeSH terms
- Alginates, Humans, Hydrogels, Tissue Scaffolds, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.