FRESH 3D Bioprinting a Full-Size Model of the Human Heart
The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Abstract
Recent advances in embedded three-dimensional (3D) bioprinting have expanded the design space for fabricating geometrically complex tissue scaffolds using hydrogels with mechanical properties comparable to native tissues and organs in the human body. The advantage of approaches such as Freeform Reversible Embedding of Suspended Hydrogels (FRESH) printing is the ability to embed soft biomaterials in a thermoreversible support bath at sizes ranging from a few millimeters to centimeters. In this study, we were able to expand this printable size range by FRESH bioprinting a full-size model of an adult human heart from patient-derived magnetic resonance imaging (MRI) data sets. We used alginate as the printing biomaterial to mimic the elastic modulus of cardiac tissue. In addition to achieving high print fidelity on a low-cost printer platform, FRESH-printed alginate proved to create mechanically tunable and suturable models. This demonstrates that large-scale 3D bioprinting of soft hydrogels is possible using FRESH and that cardiac tissue constructs can be produced with potential future applications in surgical training and planning.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Printing the ECM components at current resolutions (~250 μm feature sizes) takes hours to days (22), but at native feature sizes (1 μm) could take hundreds of years if current scaling trends are followed (eq. S1).”
From Recreating the heart's helical structure-function relationship with focused rotary jet spinning (2022) · cites this paper as [22]
In the citing paper
“Although full-size anatomical models have previously been produced with thermoplastics and hydrogels (22), these systems typically lack the micrometer-scale features needed to direct myocyte alignment.”
From Recreating the heart's helical structure-function relationship with focused rotary jet spinning (2022) · cites this paper as [22]
Citations
Cites
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
Self-citation3D bioprinting of collagen to rebuild components of the human heart
Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W. (2019) · Science · doi:10.1126/science.aav9051 · Cited by 1,782
Self-citation3D printing based on imaging data: review of medical applications
Rengier, F., Mehndiratta, A., von Tengg-Kobligk, H., Zechmann, C. M., Unterhinninghofen, R., Kauczor, H.-U., & Giesel, F. L. (2010) · International Journal of Computer Assisted Radiology and Surgery · doi:10.1007/s11548-010-0476-x · Cited by 1,584
Kuo, C. K., & Ma, P. X. (2001) · Biomaterials · doi:10.1016/s0142-9612(00)00201-5 · Cited by 1,491
Indentation Versus Tensile Measurements of Young's Modulus for Soft Biological Tissues
McKee, C. T., Last, J. A., Russell, P., & Murphy, C. J. (2011) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2010.0520 · Cited by 708
Boontheekul, T., Kong, H.-J., & Mooney, D. J. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.06.044 · Cited by 659
Gao, T., Gillispie, G. J., Copus, J. S., PR, A. K., Seol, Y.-J., Atala, A., Yoo, J. J., & Lee, S. J. (2018) · Biofabrication · doi:10.1088/1758-5090/aacdc7 · Cited by 510
3D Printing PDMS Elastomer in a Hydrophilic Support Bath via Freeform Reversible Embedding
Hinton, T. J., Hudson, A., Pusch, K., Lee, A., & Feinberg, A. W. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00170 · Cited by 437
Self-citationEngler, A. J., Richert, L., Wong, J. Y., Picart, C., & Discher, D. E. (2004) · Surface Science · doi:10.1016/j.susc.2004.06.179 · Cited by 370
Filippou, V., & Tsoumpas, C. (2018) · Medical Physics · doi:10.1002/mp.13058 · Cited by 313
Young's modulus measurements of soft tissues with application to elasticity imaging
Chen, E. J., Novakofski, J., Jenkins, W. K., & O'Brien, W. D. (1996) · IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control · doi:10.1109/58.484478 · Cited by 312
Costello, J. P., Olivieri, L. J., Su, L., Krieger, A., Alfares, F., Thabit, O., Marshall, M. B., Yoo, S.-J., Kim, P. C., Jonas, R. A., et al. (2015) · Congenital Heart Disease · doi:10.1111/chd.12238 · Cited by 241
Development and characterisation of a new bioink for additive tissue manufacturing
Melchels, F. P. W., Dhert, W. J. A., Hutmacher, D. W., & Malda, J. (2014) · Journal of Materials Chemistry B · doi:10.1039/c3tb21280g · Cited by 222
Wang, K., Ho, C., Zhang, C., & Wang, B. (2017) · Engineering · doi:10.1016/j.eng.2017.05.013 · Cited by 161
Large volume syringe pump extruder for desktop 3D printers
Pusch, K. M., Hinton, T. J., & Feinberg, A. W. (2018) · HardwareX · doi:10.1016/j.ohx.2018.02.001 · Cited by 150
Self-citationSiqueira, P., Siqueira, É. J., Lima, A. E. D., Siqueira, G. D. F., Pinzón-García, A. D., Lopes, A. P., Cortés, M. E., Isaac, A. C., Pereira, F. V., & Botaro, V. R. (2019) · Nanomaterials · doi:10.3390/nano9010078 · Cited by 143
Three-dimensional printing of models for surgical planning in patients with primary cardiac tumors
Schmauß, D., Gerber, N., & Sodian, R. (2013) · Journal of Thoracic and Cardiovascular Surgery · doi:10.1016/j.jtcvs.2012.12.030 · Cited by 110
Rheological characterization of an injectable alginate gel system
Larsen, B. E., Bjørnstad, J., Pettersen, E. O., Tønnesen, H. H., & Melvik, J. E. (2015) · BMC Biotechnology · doi:10.1186/s12896-015-0147-7 · Cited by 109
Mirdamadi, E., Muselimyan, N., Koti, P., Asfour, H., & Sarvazyan, N. A. (2019) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2018.0175 · Cited by 95
Self-citation3D Printing Silicone Elastomer for Patient‐Specific Wearable Pulse Oximeter
Abdollahi, S., Markvicka, E. J., Majidi, C., & Feinberg, A. W. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901735 · Cited by 82
Self-citationSuardi, N., Ahmad, M. S., Shukri, A., Hjouj, M., Oglat, A. A., Alarab, A., & Makhamrah, O. (2020) · Journal of Medical Ultrasound · doi:10.4103/jmu.jmu_4_19 · Cited by 65
Choe, J. A., Jana, S., Tefft, B. J., Hennessy, R. S., Go, J., Morse, D., Lerman, A., & Young, M. D. (2018) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2686 · Cited by 63
The Various Applications of 3D Printing in Cardiovascular Diseases
Sabbagh, A. E., Eleid, M. F., Al-Hijji, M. A., Anavekar, N. S., Holmes, D. R., Nkomo, V. T., Oderich, G. S., Cassivi, S. D., Said, S. M., Rihal, C. S., et al. (2018) · Current Cardiology Reports · doi:10.1007/s11886-018-0992-9 · Cited by 58
Cengiz, I. F., Pereira, H., Espregueira‐Mendes, J., Kwon, I. K., Reis, R. L., & Oliveira, J. M. (2019) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-019-6265-3 · Cited by 51
Chen, S. A., Ong, C. S., Malguria, N., Vricella, L. A., Garcia, J. R., & Hibino, N. (2018) · World Journal for Pediatric and Congenital Heart Surgery · doi:10.1177/2150135118771323 · Cited by 30
Severseike, L., Lee, V., Brandon, T., Bakken, C., & Bhatia, V. (2019) · bioRxiv (Cold Spring Harbor Laboratory) · doi:10.1101/825794 · Cited by 22
Chalon, A., Favre, J., Piotrowski, B., Landmann, V., Grandmougin, D., Maureira, J., Laheurte, P., & Tran, N. (2018) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2018.03.032 · Cited by 6
Research works printed but not linked: 1
- 10.9790/9622-0710021619 · doi:10.9790/9622-0710021619
Cited by
Mohanty, A. K., Wu, F., Mincheva, R., Hakkarainen, M., Raquez, J.-M., Mielewski, D. F., Narayan, R., Netravali, A. N., & Misra, M. (2022) · Nature Reviews Methods Primers · doi:10.1038/s43586-022-00124-8 · Cited by 355
Advances in 3D bioprinting of tissues/organs for regenerative medicine and in-vitro models
Jain, P., Kathuria, H., & Dubey, N. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2022.121639 · Cited by 237
Emergence of FRESH 3D printing as a platform for advanced tissue biofabrication
Shiwarski, D. J., Hudson, A. R., Tashman, J. W., & Feinberg, A. W. (2021) · APL Bioengineering · doi:10.1063/5.0032777 · Cited by 216
Self-citationHydrogels for Tissue Engineering: Addressing Key Design Needs Toward Clinical Translation
Xu, F., Dawson, C., Lamb, M., Mueller, E., Stefanek, E., Akbari, M., & Hoare, T. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.849831 · Cited by 209
Budharaju, H., Sundaramurthi, D., & Sethuraman, S. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.10.012 · Cited by 201
Metadata
- Authors
- Mirdamadi, E., Tashman, J. W., Shiwarski, D. J., Palchesko, R. N., & Feinberg, A. W.
- Affiliations
- Carnegie Mellon University (US)
- Corresponding author
- Feinberg, Adam W.
- Venue
- ACS Biomaterials Science & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-10-23
- Volume
- 6
- Issue
- 11
- Pages
- 6453-6459
- ISSN
- 2373-9878 (ISSN-L)
- OpenAlex
- W3093984226
- Cited by
- 292
- References
- 27
- Citations by year
- 2026: 28 · 2025: 48 · 2024: 59 · 2023: 54 · 2022: 54 · 2021: 48 · 2020: 1
- FWCI
- 12.32
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- ACS Biomaterials Science & Engineering (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Office of Naval Research (N000141712566)
- U.S. Food and Drug Administration (R01FD006582)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Physical Sciences › Engineering › Biomedical Engineering › Anatomy and Medical Technology
- Keywords
- 3D bioprinting, alginate hydrogel, surgical training, tunable mechanical properties
- MeSH terms
- Alginates, Humans, Hydrogels, Tissue Scaffolds, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.