FRESH 3D Bioprinting a Full-Size Model of the Human Heart
The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Abstract
Recent advances in embedded three-dimensional (3D) bioprinting have expanded the design space for fabricating geometrically complex tissue scaffolds using hydrogels with mechanical properties comparable to native tissues and organs in the human body. The advantage of approaches such as Freeform Reversible Embedding of Suspended Hydrogels (FRESH) printing is the ability to embed soft biomaterials in a thermoreversible support bath at sizes ranging from a few millimeters to centimeters. In this study, we were able to expand this printable size range by FRESH bioprinting a full-size model of an adult human heart from patient-derived magnetic resonance imaging (MRI) data sets. We used alginate as the printing biomaterial to mimic the elastic modulus of cardiac tissue. In addition to achieving high print fidelity on a low-cost printer platform, FRESH-printed alginate proved to create mechanically tunable and suturable models. This demonstrates that large-scale 3D bioprinting of soft hydrogels is possible using FRESH and that cardiac tissue constructs can be produced with potential future applications in surgical training and planning.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Printing the ECM components at current resolutions (~250 μm feature sizes) takes hours to days (22), but at native feature sizes (1 μm) could take hundreds of years if current scaling trends are followed (eq. S1).”
From Recreating the heart's helical structure-function relationship with focused rotary jet spinning (2022) · cites this paper as [22]
In the citing paper
“Although full-size anatomical models have previously been produced with thermoplastics and hydrogels (22), these systems typically lack the micrometer-scale features needed to direct myocyte alignment.”
From Recreating the heart's helical structure-function relationship with focused rotary jet spinning (2022) · cites this paper as [22]
Citations
Cites
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
Self-citation3D bioprinting of collagen to rebuild components of the human heart
Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W. (2019) · Science · doi:10.1126/science.aav9051 · Cited by 1,782
Self-citation3D printing based on imaging data: review of medical applications
Rengier, F., Mehndiratta, A., von Tengg-Kobligk, H., Zechmann, C. M., Unterhinninghofen, R., Kauczor, H.-U., & Giesel, F. L. (2010) · International Journal of Computer Assisted Radiology and Surgery · doi:10.1007/s11548-010-0476-x · Cited by 1,584
Kuo, C. K., & Ma, P. X. (2001) · Biomaterials · doi:10.1016/s0142-9612(00)00201-5 · Cited by 1,491
Indentation Versus Tensile Measurements of Young's Modulus for Soft Biological Tissues
McKee, C. T., Last, J. A., Russell, P., & Murphy, C. J. (2011) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2010.0520 · Cited by 708
Boontheekul, T., Kong, H.-J., & Mooney, D. J. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.06.044 · Cited by 659
Gao, T., Gillispie, G. J., Copus, J. S., PR, A. K., Seol, Y.-J., Atala, A., Yoo, J. J., & Lee, S. J. (2018) · Biofabrication · doi:10.1088/1758-5090/aacdc7 · Cited by 510
3D Printing PDMS Elastomer in a Hydrophilic Support Bath via Freeform Reversible Embedding
Hinton, T. J., Hudson, A., Pusch, K., Lee, A., & Feinberg, A. W. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00170 · Cited by 437
Self-citationEngler, A. J., Richert, L., Wong, J. Y., Picart, C., & Discher, D. E. (2004) · Surface Science · doi:10.1016/j.susc.2004.06.179 · Cited by 370
Filippou, V., & Tsoumpas, C. (2018) · Medical Physics · doi:10.1002/mp.13058 · Cited by 313
Research works printed but not linked: 1
- 10.9790/9622-0710021619 · doi:10.9790/9622-0710021619
Cited by
Items 201–300 of 315
Growth Factor Stimulation Regimes to Support the Development and Fusion of Cartilage Microtissues
Kronemberger, G. S., Spagnuolo, F. D., Karam, A., Chattahy, K., Storey, K. J., & Kelly, D. J. (2024) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2024.0309 · Cited by 7
Kim, G., Oh, D., Kim, D., Lee, G., Park, S.-H., Yoon, C., & Nam, S. Y. (2025) · Additive manufacturing · doi:10.1016/j.addma.2025.104667 · Cited by 7
A highly realistic hydrogel-based simulated vascular model for Surgical Hemostasis training
Zhu, Z., Ma, L., Wu, J., Bai, Y., Mao, J., Su, J., Xia, M., Zhou, M., Man, Q., Aili, A., et al. (2025) · Composites Communications · doi:10.1016/j.coco.2025.102275 · Cited by 7
Kim, B., Kim, J. W., & Lee, S. (2024) · International Journal of Stem Cells · doi:10.15283/ijsc23146 · Cited by 7
Using hiPSC‐CMs to Examine Mechanisms of Catecholaminergic Polymorphic Ventricular Tachycardia
Arslanova, A., Shafaattalab, S., Ye, K., Asghari, P., Lin, L. Y., Kim, B., Roston, T. M., Hove‐Madsen, L., Petegem, F. V., Sanatani, S., et al. (2021) · Current Protocols · doi:10.1002/cpz1.320 · Cited by 7
Chaufer, M., Delille, R., Bourel, B., Maréchal, C., Lauro, F., Mauzac, O., & Roth, S. (2024) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1177/09544119241232122 · Cited by 6
Embedded 3D printing of engineered lung cancer model for assisting fine-needle aspiration biopsy
Hua, W., Zhang, C., Raymond, L., Mitchell, K., Xiao, K., Coulter, R., Bandala, E. R., Bishwokarma, M., Yang, Y., Zhao, D., et al. (2024) · Biofabrication · doi:10.1088/1758-5090/ad9fe0 · Cited by 6
Seiti, M., Mazzoldi, E. L., Pandini, S., Ferraris, E., & Ginestra, P. S. (2025) · Bioprinting · doi:10.1016/j.bprint.2025.e00403 · Cited by 6
Aizarna‐Lopetegui, U., Herrero‐Ruiz, A., Decarli, M. C., Urigoitia‐Asua, A., Chavarri, K., Moroni, L., Henriksen‐Lacey, M., & de Aberasturi, D. J. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202419072 · Cited by 6
Engineering multicellular living systems—a Keystone Symposia report
Cable, J., Arlotta, P., Parker, K. K., Hughes, A. J., Goodwin, K., Mummery, C. L., Kamm, R. D., Engle, S. J., Tagle, D. A., Boj, S. F., et al. (2022) · Annals of the New York Academy of Sciences · doi:10.1111/nyas.14896 · Cited by 6
Self-citation3D Printing of Bioplastics for Medical Applications
Patel, P. K., Sonagara, C., Kumar, S., Meena, K., & Banerjee, S. S. (2025) · Polymer Engineering and Science · doi:10.1002/pen.27266 · Cited by 6
3D printing families: laser, powder, and nozzle-based techniques
Mousavi, A., Provaggi, E., Kalaskar, D. M., & Savoji, H. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-89831-7.00009-2 · Cited by 6
Harley, W. S., Yoshie, H., & Gentile, C. (2021) · ASAIO Journal · doi:10.1097/mat.0000000000001389 · Cited by 6
Closed-loop vasculature network design for bioprinting large, solid tissue scaffolds
Kumar, H., Dixit, K., Sharma, R. S., MacDonald, M. E., Sinha, N., & Kim, K. (2023) · Biofabrication · doi:10.1088/1758-5090/acb73c · Cited by 6
Modelling Cardiovascular Diseases Using Human Microphysiological Systems
Ribeiro, Q., Lopes, E., Ferreira, I. S., Simões, C. G., Vital, C. M., Inácio, J. M., Belo, J. A., Rybak‐Wolf, A., Marques, A. R. A., & Vieira, O. V. (2026) · BioChip Journal · doi:10.1007/s13206-025-00247-6 · Cited by 5
Budharaju, H., K, P. K. S., Rajendran, M., Sivasubramanian, M., Sethuraman, S., & Sundaramurthi, D. (2026) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5c01868 · Cited by 5
Vu, D. T., Phan, N. A., Ngo, S. T., Phan, M. T., Truong, T., Nguyen, C. C., Phan, P. T., Phan, H., Do, T. N., & Thai, M. T. (2026) · Advanced Science · doi:10.1002/advs.202523532 · Cited by 5
Building the framework for bioprinted human heart tissue: recent developments and future prospects
da Silva, V. A., Leung, M. C., Clayton, M., Oommen, L., Madrigal, H., Laksman, Z., Yu, B., & Willerth, S. M. (2025) · Regenerative Medicine · doi:10.1080/17460751.2025.2558269 · Cited by 5
Mechanical Characterization of Additive Manufactured Polymeric Scaffolds for Tissue Engineering
Pecorini, G., Chiellini, E., & Puppi, D. (2022) · Springer eBooks · doi:10.1007/978-981-16-4566-2_5 · Cited by 5
FRESH METHOD: 3D BIOPRINTING AS A NEW APPROACH FOR TISSUE AND ORGAN REGENERATION
Balogová, A. F., Trebuňová, M., Rajťúková, V., & Hudák, R. (2021) · Acta Tecnología · doi:10.22306/atec.v7i3.112 · Cited by 5
Lee, V., Severseike, L., Bakken, C., Bermel, E., & Bhatia, V. (2020) · bioRxiv (Cold Spring Harbor Laboratory) · doi:10.1101/2020.12.23.424075 · Cited by 5
3D Bioprinted Cardiac Patch Devices for Regenerative Therapies
Hwang, B., Jin, L., Cadena, M., Bauser‐Heaton, H. D., & Serpooshan, V. (2025) · Current Treatment Options in Cardiovascular Medicine · doi:10.1007/s11936-025-01074-6 · Cited by 4
Kloke, L. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-29228-6.00011-6 · Cited by 4
Additive manufacturing and 3D printing techniques for biopolymers
An, J., & Leong, K. F. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-95151-7.00009-0 · Cited by 4
Dang, Y. H., Dauzat, E., Istiak, A., Jackson, K., Songe, V., West, L., Kayes, M. I., Islam, M. S., & Faisal, T. R. (2025) · Annals of 3D Printed Medicine · doi:10.1016/j.stlm.2025.100212 · Cited by 4
Oliveira, P. F., Fragal, E. H., Sudre, G., Montembault, A., Lux, F., Tillement, O., Bonnefont-Rebeix, C., Buff, S., Udrescu, C., Chapet, O., et al. (2022) · Tissue Engineering Part A · doi:10.1089/ten.tea.2022.29036.abstracts · Cited by 4
Topological tracks patterned via 3D printing vascularize murine organ-scale constructs
Prado, O., Malkani, S., Johansson, F., Zhang, F., Fasuyi, A., Saxton, S. H., Kinstlinger, I. S., Miller, J. S., & Stevens, K. R. (2026) · Cell Biomaterials · doi:10.1016/j.celbio.2026.100369 · Cited by 3
Li, Z., Shen, C. C., Shin, J., Dixit, K., Kumar, H., Zhang, H., Liu, D., Lu, Q., Chen, G., Lee, H. J., et al. (2026) · Materials & Design · doi:10.1016/j.matdes.2026.115658 · Cited by 3
Santo, C. A. D. E., Coelho, R. C., & Kunkel, M. E. (2025) · Research on Biomedical Engineering · doi:10.1007/s42600-025-00400-y · Cited by 3
Palaniappan, A., Ramesh, P., Maya, B., & Shyam, R. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-29260-6.00016-0 · Cited by 3
Mozammal, H. M. D., & Lee, H. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.146667 · Cited by 4
EXPECT: A thermosensitive embedded bioprinting platform for guided spatial cell organization
Pylostomou, A., Wychowaniec, J. K., Tognato, R., Egger, S. T., Alig, G. U., Edwards‐Gayle, C. J. C., Safari, F., Weiser, J. R., Loča, D., D’Este, M., et al. (2025) · Smart Materials in Medicine · doi:10.1016/j.smaim.2025.09.002 · Cited by 3
Fresh 3D Printing of Double Crosslinked Hyaluronic Acid/Pectin Hydrogels
Catori, D. M., Lorevice, M. V., da Silva, L. C. E., Candido, G., Millás, A. L. G. M., & de Oliveira, M. G. (2022) · Macromolecular Symposia · doi:10.1002/masy.202200050 · Cited by 3
Design and Additive Manufacturing of a Hedgehog-Inspired Soft Robot Companion
Hiramandala, G., Calais, T., Stalin, T., Chooi, A., Mathai, A. R. P., Jain, S., Kanhere, E. V., & y Alvarado, P. V. (2023) · IEEE International Conference on Soft Robotics (RoboSoft) · doi:10.1109/robosoft55895.2023.10121945 · Cited by 3
Laubach, M., Hartmann, H., Holzapfel, B. M., Mayer‐Wagner, S., Schenke‐Layland, K., & Hutmacher, D. W. (2024) · Die Chirurgie · doi:10.1007/s00104-024-02197-5 · Cited by 3
Roberts, E. G., Mak, S. Y., Wong, A. O.-T., Tran, D. D., Lee, E. K., Kurokawa, Y. K., Jennbacken, K., Wang, Q., Lieu, D. K., Hajjar, R. J., et al. (2022) · Advanced Engineering Materials · doi:10.1002/adem.202101481 · Cited by 3
Microfluidic-Driven Biofabrication and the Engineering of Cancer-Like Microenvironments
Guimarães, C. F., Gasperini, L., & Reis, R. L. (2022) · Advances in experimental medicine and biology · doi:10.1007/978-3-031-04039-9_8 · Cited by 3
3D-bioprinted in vitro disease models
Maia, F. R., Reis, R. L., & Oliveira, J. M. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-89831-7.00004-3 · Cited by 3
3D Bioprinting: Manufacturing the Human Heart
Park, S., & Talbot, J. (2023) · Journal of Student Research · doi:10.47611/jsrhs.v12i1.4062 · Cited by 3
Tejo‐Otero, A. (2021) · UPCommons institutional repository (Universitat Politècnica de Catalunya) · doi:10.5821/dissertation-2117-414264 · Cited by 3
Rahimnejad, M. (2022) · Papyrus : Institutional Repository (Université de Montréal) · doi:10.71781/27944 · Cited by 3
Développement de tissus vasculaires par bioimpression 3D
Devillard, C. D. (2021) · theses.fr (ABES) · doi:10.70675/1428e3dcz869bz4277zb0fdzda18f0e8832b · Cited by 3
Printing and Rerouting of Elastic and Protease Responsive Shape Memory Hydrogel Filaments
Lifwergren, P., Schoen, V., Naeimipour, S., Khare, L. P., Wunder, A., Blom, H., Martínez, J. G., Pagella, P., Fridberger, A., Junker, J. P. E., et al. (2025) · Advanced Healthcare Materials · doi:10.1002/adhm.202502262 · Cited by 2
Rahman, M. M., Khan, M. A. H., Mai, T., & Kim, J. (2026) · Bioprinting · doi:10.1016/j.bprint.2026.e00490 · Cited by 2
Stark, B. L., Perez, J. L., Borrego, E. A., Poon, W., & Natividad-Diaz, S. L. (2026) · ACS Omega · doi:10.1021/acsomega.6c00607 · Cited by 2
Progressing Regenerative Medicine: Integrating Bioprinting Platforms for Stem Cell Applications
Rajalekshmi, R., & Agrawal, D. K. (2026) · Stem Cells International · doi:10.1155/sci/3319102 · Cited by 2
3D Bioprinting Phototunable Hydrogels to Study Fibroblast Activation
Tanneberger, A. E., Blair, L., Davis‐Hall, D., & Magin, C. M. (2023) · Journal of Visualized Experiments · doi:10.3791/65639 · Cited by 2
Advancements in Bioprinting for Medical Applications
Wu, K. Y., Joly-Chevrier, M., Gorwill, L. K., Marchand, M., & Tran, S. D. (2024) · Wiley eBooks · doi:10.1002/9781119894407.ch6 · Cited by 2
3D printed collagen scaffold for heart valve repair
Piva, H. L., Leite, V. O., & Tedesco, A. C. (2024) · Annals of 3D Printed Medicine · doi:10.1016/j.stlm.2024.100181 · Cited by 2
Jiang, W., LIU, C., CHEN, E., Tang, H., Wu, D., You, Y., HU, Y., CHEN, J., LEE, Y., Xu, Y., et al. (2025) · Biocell · doi:10.32604/biocell.2024.057259 · Cited by 2
Petronaitis, A. (2023) · reposiTUm (TU Wien) · doi:10.34726/hss.2023.111328 · Cited by 2
Chang, S.-Y., Lai, Y.-C., Huang, Y.-B., Wang, T., Chou, Y., & Li, D.-R. (2026) · Journal of Micromechanics and Microengineering · doi:10.1088/1361-6439/ae4bea · Cited by 1
Obando, A. G., Shen, H., McGovern, M., Zhang, Y., Lin, V., Fu, D., Baumwart, R. D., & Qiu, K. (2026) · Advanced Materials Technologies · doi:10.1002/admt.70885 · Cited by 1
Jammed Microfiber Inks Enable Aligned 3D Printing for Epigenetic Muscle Regeneration
Youn, K. I., Park, J.-H., Mandakhbayar, N., Taghizadeh, M., Jin, S., Kim, J., Lee, J., & Song, K. H. (2026) · Advanced Fiber Materials · doi:10.1007/s42765-026-00694-2 · Cited by 1
Mansi, S., Halbherr, S., Möller, F., Ernst, A. L., Bauer, S., Kuznetsova, Z., Samsarelou, M. K., Rickert, C. A., Heinrich, D., Zhong, Z., et al. (2026) · Small Science · doi:10.1002/smsc.70371 · Cited by 1
Designing Tissue Function Through Embedded Bioprinting Architectures
Li, Q., Cao, Y., Lin, J., Yang, H., & Zhou, H. (2026) · Advanced Science · doi:10.1002/advs.77342 · Cited by 1
Science and Technology of Collagen
Shah, D. P., Anju, T. R., & Krishnakumar, A. (2024) · Springer eBooks · doi:10.1007/978-981-99-6727-8_53 · Cited by 1
Heile, E., Komosa, E. R., & Ogle, B. M. (2021) · Minnesota Undergraduate Research & Academic Journal · Cited by 1
Liquid Support Bath–Assisted 3 D Bioprinting
Hua, W., Godina, B., & Jin, Y. (2021) · Wiley eBooks · doi:10.1002/9783527828593.ch7 · Cited by 1
Stem Cell Applications in Cardiac Tissue Regeneration
Sharma, V., Dash, S. K., Gupta, P. K., Zipporah, B. E., Haider, K. H., & Govarthanan, K. (2022) · Springer eBooks · doi:10.1007/978-981-19-2655-6_36 · Cited by 1
Strategies in 3D Bioprinting of Cell‐Laden Bioinks
Yin, J., Xu, C., Zhang, Z., Jin, Y., & Huang, Y. H. (2023) · Additive manufacturing technology · doi:10.1002/9783527833931.ch2 · Cited by 1
Asohan, A. W., Jasme, N., Kahar, N. N. F. N. M. N., Bustami, Y., & Hamid, Z. A. A. (2023) · Springer eBooks · doi:10.1007/978-981-99-2267-3_13 · Cited by 1
Bioprinting in Pharmaceuticals
Dixit, M., Singh, N., Das, P., & Datta, P. (2023) · Springer eBooks · doi:10.1007/978-981-99-2404-2_9 · Cited by 1
3D Printing of Polymer and Polymer Matrix Composites
Abdul, W., Durgaiahsangam, H. P., Jyosyula, S. K. R., & Khan, M. A. (2024) · Engineering materials · doi:10.1007/978-981-97-2075-0_9 · Cited by 1
Hwang, B., Bauser‐Heaton, H. D., & Serpooshan, V. (2025) · Regenerative Medicine · doi:10.1080/17460751.2025.2469433 · Cited by 1
MRI-to-Synthetic 3D Gel Brain: Proof-of-Concept Fabrication For Intra-Parenchymal Diffusion StudiesPreprint
Ray, L., Shaw, C., Otto, S., Riviere-Cazaux, C., Strother, L., Burns, T. C., & Khan, M. R. (2022) · bioRxiv (Cold Spring Harbor Laboratory) · doi:10.1101/2022.10.27.514134 · Cited by 1
Longitudinal oxygen imaging in 3D (bio)printed models
O’Connell, R. C. (2023) · The Research Repository @ WVU (West Virginia University) · doi:10.33915/etd.12172 · Cited by 1
PVA-SbQ Bioinks for Biofabrication
Li, Z. (2024) · doi:10.11575/prism/47085 · Cited by 1
Tao, R. (2022) · PolyPublie (École Polytechnique de Montréal) · Cited by 1
Bioprinting Marches Forward With New Technology
Mertz, L. (2021) · IEEE Pulse · doi:10.1109/mpuls.2021.3094252
Stem Cell Applications in Cardiac Tissue Regeneration
Sharma, V., Dash, S. K., Gupta, P. K., Zipporah, B. E., Haider, K. H., & Govarthanan, K. (2022) · Springer eBooks · doi:10.1007/978-981-16-6016-0_36-1
The FRESH method of bioprinting the heart for transplantation
Yang, S., & Rosha, S. (2022) · STEM Fellowship Journal · doi:10.17975/sfj-2022-013
Nanogel: a versatile bioactive drug delivery system
Zu, G. (2022) · University of Groningen research database (University of Groningen / Centre for Information Technology) · doi:10.33612/diss.233703790
3D Printing of Green Materials
Nejad, Z. M., Mousavi, S. M., Hashemi, S. A., Chiang, W., & Lai, C. W. (2022) · Encyclopedia of Green Materials · doi:10.1007/978-981-16-4921-9_226-1
Advanced Research in Pediatric Radiology and Nuclear Medicine
Ng, C. K. C. (2023) · MDPI eBooks · doi:10.3390/books978-3-0365-7958-0
Science and Technology of Collagen
Shah, D. P., Anju, T. R., & Krishnakumar, A. (2023) · Springer eBooks · doi:10.1007/978-981-19-6772-6_53-1
Seiti, M., Mazzoldi, E. L., Benini, G., Pandini, S., Giliani, S., Ferraris, E., Ceretti, E., & Ginestra, P. S. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4785595
Torres-Ayala, L. K., & Casado, F. L. (2024) · REVISTA DE INNOVACIÓN Y TRANSFERENCIA PRODUCTIVA · doi:10.54353/ritp.v3i2.e013
Does the PolyJet Printing Technology Affect Mechanical Properties of 3D Printed Synthetic Tissue?Preprint
Kohnle, S., Bermel, E., Severseike, L., & Bhatia, V. (2024) · bioRxiv (Cold Spring Harbor Laboratory) · doi:10.1101/2024.06.18.599608
3D bioprinting of low-viscosity phase-separated food-grade bioinks by in situ self-assemblyPreprint
Oliveira, S. M., DeSantis, G., & Pastrana, L. M. (2024) · bioRxiv (Cold Spring Harbor Laboratory) · doi:10.1101/2024.07.06.602353
Surgical Training Outcomes Using a Mixed Reality Combination SystemPreprint
Kabuye, E., Bone, J. M., Hudson, A. R., Feinberg, A. W., Sangimino, M. J., Cagan, J., & LeDuc, P. R. (2024) · Research Square · doi:10.21203/rs.3.rs-4978732/v1
Self-citationБІОІНЖЕНЕРНИЙ ПОТЕНЦІАЛ 3D-БІОДРУКУ ДЛЯ СТВОРЕННЯ ФУНКЦІОНАЛЬНИХ МОДЕЛЕЙ ПЕЧІНКИ
Маслянчук, С., & Луценко, Т. (2024) · Біомедична інженерія і технологія · doi:10.20535/.2024.16.317947
3D Printing of Green Materials
Nejad, Z. M., Mousavi, S. M., Hashemi, S. A., Chiang, W., & Lai, C. W. (2024) · Encyclopedia of Green Materials · doi:10.1007/978-981-97-4618-7_226
Uso de tecnologias de impressão 3D para planejamento cirúrgico em cardiopatias congênitas
Cunha, H. M. D. S., Lessa, M. F. B., Muzzi, I. G., Lessa, M. E. B., Gomes, I. M. Q., Moreira, A. P. T., Peixoto, M. A. S., LEMES, B. G., Araujo, B. C. V., Medeiros, A. A., et al. (2025) · Caderno Pedagógico · doi:10.54033/cadpedv22n1-129
Study of a Simulator for Surgical Training in Percutaneous Left Atrial Appendage Occlusion Procedure
Magnani, A., Buonamici, F., & Furferi, R. (2025) · Lecture notes in mechanical engineering · doi:10.1007/978-3-031-76594-0_5
Evaluation of a Dielectric Elastomer Actuator Made of an Organogel Fabricated by 3D Printing
Higuchi, M., & Hayakawa, T. (2025) · IEEE/SICE International Symposium on System Integration (SII) · doi:10.1109/sii59315.2025.10871042
Ganash, M., Edwards, S., Guan, Z., Kim, Y. J., & Jeong, K. J. (2025) · ACS Applied Engineering Materials · doi:10.1021/acsaenm.5c00583
WITHDRAWN: Omnidirectional 3D Printing of Anisotropic Nanofibrous Peptide HydrogelsPreprint
Farsheed, A. C., Makhoul, J. T., Chew-Martinez, D., Maldonado, E. C., Liu, J., Yu, L. T., Gorostieta-Salas, E., Jones, J. R., Gage, F. H., & Hartgerink, J. D. (2025) · bioRxiv (Cold Spring Harbor Laboratory) · doi:10.1101/2025.11.06.687046
Βioprinted tubular structures using a bioactive composite ink for vascular tissue engineering
Platania, V., Tavernaraki, N. N., Gontika, I., Fragiadaki, I., Alpantaki, K., Triantopoulou, N., Petridi, I., Untracht, G. R., Andersen, P. E., Vidaki, M., et al. (2026) · Bioprinting · doi:10.1016/j.bprint.2026.e00482
BIOMANUFACTURING METHODS FOR RECAPITULATING NATIVE-LIKE PROPERTIES IN TISSUE ENGINEERED HEART VALVES
Albert, B. J. (2023) · eCommons (Cornell University) · doi:10.7298/hm00-5524
Exploring Biofabrication and Print State Detection in Tomographic Volumetric Additive Manufacturing
Luk, S. M. (2024) · eScholarship (California Digital Library)
Effects of Organoids Seeded in Bioprinted Constructs: In Vitro and In Vivo Applications
Willson, K. (2024) · WakeSpace Scholarship (Wake Forest University)
Tanneberger, A. E. (2021) · ScholarWorks -A service of University of Vermont Libraries (University of Vermont)
The use of mechanical foaming for development of bioinks and bioprinting techniques
Madadian, E. (2023) · Espace ÉTS (ETS)
Ink-gel simultaneous embedded 3D printing
Driel, A. V. (2025) · Open University of Cape Town (University of Cape Town)
Embedded 3D Printing of Polymeric and Ceramic Lattices
Weeks, R. D. (2023) · Digital Access to Scholarship at Harvard (DASH) (Harvard University)
Wu, K. (2025) · FreiDok plus (Universitätsbibliothek Freiburg) · doi:10.6094/unifr/273078
Controlled deposition of human neural stem cells on fiber substrates using gel encapsulation
Hörberg, C.-J., Arvidsson, M., Sandberg, A., O’Carroll, D. C., Johansson, F., & Johansson, U. E. (2026) · PLoS ONE · doi:10.1371/journal.pone.0341624
3D Bioprinting of Protein-Based Tubular Structures for Functional Tissue Models
Gao, W. (2024) · TSpace (University of Toronto)
Alginate Foils: A Study on Bio-Based Sound Absorbers in Architecture
Ott, C., Hemmer, D., Mohan, T., Kleinschek, K. S., Balint, J., & Stavrić, M. (2026) · Buildings · doi:10.3390/buildings16051035
Metadata
- Authors
- Mirdamadi, E., Tashman, J. W., Shiwarski, D. J., Palchesko, R. N., & Feinberg, A. W.
- Affiliations
- Carnegie Mellon University (US)
- Corresponding author
- Feinberg, Adam W.
- Venue
- ACS Biomaterials Science & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-10-23
- Volume
- 6
- Issue
- 11
- Pages
- 6453-6459
- ISSN
- 2373-9878 (ISSN-L)
- OpenAlex
- W3093984226
- Cited by
- 292
- References
- 27
- Citations by year
- 2026: 28 · 2025: 48 · 2024: 59 · 2023: 54 · 2022: 54 · 2021: 48 · 2020: 1
- FWCI
- 12.32
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- ACS Biomaterials Science & Engineering (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Office of Naval Research (N000141712566)
- U.S. Food and Drug Administration (R01FD006582)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Physical Sciences › Engineering › Biomedical Engineering › Anatomy and Medical Technology
- Keywords
- 3D bioprinting, alginate hydrogel, surgical training, tunable mechanical properties
- MeSH terms
- Alginates, Humans, Hydrogels, Tissue Scaffolds, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.