The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Trace Levels of Copper in Carbon Materials Show Significant Electrochemical CO2 Reduction Activity
Open accessAbstract
Carbon materials are frequently used as supports for electrocatalysts because they are conductive and have high surface area. However, recent studies have shown that these materials can contain significant levels of metallic impurities that can dramatically alter their electrochemical properties. Here, the electrocatalytic activity of pure graphite (PG), graphene oxide (GO), and carbon nanotubes (CNT) dispersed on glassy carbon (GC) are investigated for the electrochemical CO 2 reduction reaction (CO2RR) in aqueous solution. It was observed that GO and CNT dispersed on GC all exhibit significant electrochemical activity that can be ascribed to impurities of Ni, Fe, Mn, and Cu. The level of Cu in GO can be particularly high and is the cause for the appearance of methane in the products produced over this material when it is used for the CO2RR. Washing these supports in ultrapure nitric acid is effective in removing the metal impurities and results in a reduction in the electrochemical activity of these forms of carbon. In particular, for GO, nearly all of the catalytically relevant metals can be removed. Electrochemical deposition of Cu on GO and PG supported on GC, and on GC itself, increased both the electrochemical activity of these materials and the production of methane via the CO2RR. Particularly high rates of methane formation per unit of Cu mass were obtained for Cu electrodeposited on GO and PG supported on GC. We suggest that this high activity may be due to the preferential deposition of Cu onto defects present in the graphene sheets comprising these materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Noble metal-free hydrogen evolution catalysts for water splitting
Zou, X., & Zhang, Y. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00448e · Cited by 5,955
How copper catalyzes the electroreduction of carbon dioxide into hydrocarbon fuels
Peterson, A. A., Abild-Pedersen, F., Studt, F., Rossmeisl, J., & Nørskov, J. K. (2010) · Energy & Environmental Science · doi:10.1039/c0ee00071j · Cited by 3,784
New insights into the electrochemical reduction of carbon dioxide on metallic copper surfaces
Kuhl, K. P., Cave, E. R., Abram, D. N., & Jaramillo, T. F. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21234j · Cited by 3,160
A review of catalysts for the electroreduction of carbon dioxide to produce low-carbon fuels
Qiao, J., Liu, Y., Hong, F., & Zhang, J. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60323g · Cited by 2,990
Activity Descriptors for CO 2 Electroreduction to Methane on Transition-Metal Catalysts
Peterson, A. A., & Nørskov, J. K. (2012) · The Journal of Physical Chemistry Letters · doi:10.1021/jz201461p · Cited by 1,667
Electrocatalytic Conversion of Carbon Dioxide to Methane and Methanol on Transition Metal Surfaces
Kuhl, K. P., Hatsukade, T., Cave, E. R., Abram, D. N., Kibsgaard, J., & Jaramillo, T. F. (2014) · Journal of the American Chemical Society · doi:10.1021/ja505791r · Cited by 1,649
Kim, D., Resasco, J., Yu, Y., Asiri, A. M., & Yang, P. (2014) · Nature Communications · doi:10.1038/ncomms5948 · Cited by 1,374
Achieving Highly Efficient, Selective, and Stable CO2 Reduction on Nitrogen-Doped Carbon Nanotubes
Wu, J., Yadav, R. M., Liu, M., Sharma, P. P., Tiwary, C. S., Ma, L., Zou, X., Zhou, X.-D., Yakobson, B. I., Lou, J., et al. (2015) · ACS Nano · doi:10.1021/acsnano.5b01079 · Cited by 652
Cited by
Electrocatalysis for CO 2 conversion: from fundamentals to value-added products
Wang, G., Chen, J., Ding, Y., Cai, P., Yi, L., Li, Y., Tu, C., Hou, Y., Wen, Z., & Dai, L. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00071j · Cited by 1,295
Surface and Interface Control in Nanoparticle Catalysis
Xie, C., Niu, Z., Kim, D., Li, M., & Yang, P. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00220 · Cited by 864
Electrochemical CO2 reduction: Electrocatalyst, reaction mechanism, and process engineering
Lu, Q., & Jiao, F. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.04.009 · Cited by 824
Metal‐Free Carbon Materials for CO2 Electrochemical Reduction
Duan, X., Xu, J., Wei, Z., Ma, J., Guo, S., Wang, S., Liu, H., & Dou, S. (2017) · Advanced Materials · doi:10.1002/adma.201701784 · Cited by 754
Molecular enhancement of heterogeneous CO2 reduction
Nam, D.-H., De Luna, P., Rosas-Hernández, A., Thevenon, A., Li, F., Agapie, T., Peters, J. C., Shekhah, O., Eddaoudi, M., & Sargent, E. H. (2020) · Nature Materials · doi:10.1038/s41563-020-0610-2 · Cited by 742
Atomically Dispersed Molybdenum Catalysts for Efficient Ambient Nitrogen Fixation
Han, L., Liu, X., Chen, J., Lin, R., Liu, H., Lü, F., Bak, S., Liang, Z., Zhao, S., Stavitski, E., et al. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201811728 · Cited by 662
Wu, J., Ma, S., Sun, J., Gold, J. I., Tiwary, C., Kim, B., Zhu, L., Chopra, N., Odeh, I. N., Vajtai, R., et al. (2016) · Nature Communications · doi:10.1038/ncomms13869 · Cited by 658
Recent Advances in Electrochemical CO2‐to‐CO Conversion on Heterogeneous Catalysts
Zheng, T., Jiang, K., & Wang, H. (2018) · Advanced Materials · doi:10.1002/adma.201802066 · Cited by 579
Schreier, M., Héroguel, F., Steier, L., Ahmad, S., Luterbacher, J. S., Mayer, M. T., Luo, J., & Grätzel, M. (2017) · Nature Energy · doi:10.1038/nenergy.2017.87 · Cited by 542
Stable and Efficient Single-Atom Zn Catalyst for CO2 Reduction to CH4
Han, L., Song, S., Liu, M., Yao, S., Liang, Z., Cheng, H., Ren, Z., Liu, W., Lin, R., Qi, G., et al. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.9b12111 · Cited by 538
A Highly Porous Copper Electrocatalyst for Carbon Dioxide Reduction
Lv, J., Jouny, M., Luc, W., Zhu, W., Zhu, J., & Jiao, F. (2018) · Advanced Materials · doi:10.1002/adma.201803111 · Cited by 497
Vasileff, A., Zheng, Y., & Qiao, S. Z. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700759 · Cited by 405
Interfacial Electrolyte Effects on Electrocatalytic CO2 Reduction
Deng, B., Huang, M., Zhao, X., Mou, S., & Dong, F. (2022) · ACS Catalysis · doi:10.1021/acscatal.1c03501 · Cited by 326
Wu, J., Sharifi, T., Gao, Y., Zhang, T., & Ajayan, P. M. (2019) · Advanced Materials · doi:10.1002/adma.201804257 · Cited by 325
Tomboc, G. M., Choi, S., Kwon, T., Hwang, Y. J., & Lee, K. (2020) · Advanced Materials · doi:10.1002/adma.201908398 · Cited by 325
Regulating the oxidation state of nanomaterials for electrocatalytic CO2reduction
Wu, Z.-Z., Gao, F.-Y., & Gao, M.-R. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02747b · Cited by 311
Lei, Y., Wang, Z., Bao, A., Tang, X., Huang, X., Yi, H., Zhao, S., Sun, T., Wang, J., & Gao, F. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.139663 · Cited by 267
Tailoring gas-phase CO 2 electroreduction selectivity to hydrocarbons at Cu nanoparticles
Merino-Garcia, I., Albo, J., & Irabien, A. (2018) · Nanotechnology · doi:10.1088/1361-6528/aa994e · Cited by 129
Metadata
- Authors
- Lum, Y., Kwon, Y., Lobaccaro, P., Chen, L., Clark, E. L., Bell, A. T., & Ager, J. W.
- Venue
- ACS Catalysis
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-12-08
- Volume
- 6
- Issue
- 1
- Pages
- 202-209
- ISSN
- 2155-5435 (ISSN-L)
- OpenAlex
- W2344507645
- Cited by
- 165
- References
- 8
- FWCI
- 4.79
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.