The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Nitrogen-Doped CoSe2 as a Bifunctional Catalyst for High Areal Capacity and Lean Electrolyte of Li–S Battery
Abstract
The sluggish redox kinetics of polysulfides and difficult oxidation process of Li 2 S severely hinder practical application of Li–S batteries under high sulfur loading and a low electrolyte dosage. To address these issues, we develop a bifunctional catalyst by manipulation of anion N doping in CoSe 2 (N-CoSe 2 ). Theoretical simulation results uncover that an introduced N element into CoSe 2 could form a shorter Co–N bond, create a higher charge number of the Co central atom, bring new defect levels, and induce the Co 3d band closer to Fermi level. Further atomic level analysis revealed that N-CoSe 2 could form shorter Co–S bonds with sulfur species and simultaneously weaken the S–S bridged bond of Li 2 S 4 and Li–S bond of Li 2 S, which eventually facilitate the polysulfide conversion reaction in the discharge process and the Li 2 S oxidation in the charge process. With N-CoSe 2 as a bifunctional catalyst, the battery exhibited a high areal capacity of 9.26 mAh g –1 under the low E/S (electrolyte/sulfur) ratio of 4.4 μL mg –1 . Understanding the design concept of a bifunctional catalyst with anion doping would provide a new vision for realizing a high-performance Li–S battery.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Catalytic oxidation of Li 2 S on the surface of metal sulfides for Li−S batteries
Zhou, G., Tian, H., Jin, Y., Tao, X., Liu, B., Zhang, R., Seh, Z. W., Zhuo, D., Liu, Y., Sun, J., et al. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1615837114 · Cited by 1,278
Xiao, Z., Wang, Y., Huang, Y.-C., Wei, Z., Dong, C.-L., Ma, J., Shen, S., Li, Y., & Wang, S. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01917c · Cited by 1,063
Mechanism and Kinetics of Li2S Precipitation in Lithium–Sulfur Batteries
Fan, F. Y., Carter, W. C., & Chiang, Y. (2015) · Advanced Materials · doi:10.1002/adma.201501559 · Cited by 987
Gao, S., Gu, B., Jiao, X., Sun, Y., Zu, X., Yang, F., Zhu, W., Wang, C., Feng, Z., Ye, B., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b11263 · Cited by 641
Yuan, H., Peng, H., Li, B., Xie, J., Kong, L., Zhao, M., Chen, X., Huang, J., & Zhang, Q. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201802768 · Cited by 626
Zhou, G., Zhao, S., Wang, T., Yang, S.-Z., Johannessen, B., Chen, H., Liu, C., Ye, Y., Wu, Y., Peng, Y., et al. (2020) · Nano Letters · doi:10.1021/acs.nanolett.9b04719 · Cited by 605
A novel synergistic composite with multi-functional effects for high-performance Li–S batteries
Li, Y.-J., Fan, J.-M., Zheng, M.-S., & Dong, Q.-F. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00104a · Cited by 600
He, J., Hartmann, G., Lee, M., Hwang, G. S., Chen, Y., & Manthiram, A. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03252a · Cited by 589
He, J., Chen, Y., & Manthiram, A. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00893k · Cited by 565
He, J., Luo, L., Chen, Y., & Manthiram, A. (2017) · Advanced Materials · doi:10.1002/adma.201702707 · Cited by 521
Heteroatom-doped transition metal electrocatalysts for hydrogen evolution reaction
Jin, H., Liu, X., Chen, S., Vasileff, A., Li, L., Jiao, Y., Song, L., Zheng, Y., & Qiao, S.-Z. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b00348 · Cited by 469
Tao, H. B., Fang, L., Chen, J., Yang, H. B., Gao, J., Miao, J., Chen, S., & Liu, B. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b05398 · Cited by 468
Surface Chemistry in Cobalt Phosphide-Stabilized Lithium–Sulfur Batteries
Zhong, Y., Yin, L., He, P., Liu, W., Wu, Z., & Wang, H. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b11434 · Cited by 458
Chen, X., Hou, T., Persson, K. A., & Zhang, Q. (2019) · Materials Today · doi:10.1016/j.mattod.2018.04.007 · Cited by 446
Xu, J., Zhang, W., Fan, H., Cheng, F., Su, D., & Wang, G. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.06.046 · Cited by 422
Yao, H., Zheng, G., Hsu, P.-C., Kong, D., Cha, J. J., Li, W., Seh, Z. W., McDowell, M. T., Yan, K., Liang, Z., et al. (2014) · Nature Communications · doi:10.1038/ncomms4943 · Cited by 398
Implanting Atomic Cobalt within Mesoporous Carbon toward Highly Stable Lithium–Sulfur Batteries
Xie, J., Li, B., Peng, H., Song, Y., Zhao, M., Chen, X., Zhang, Q., & Huang, J. (2019) · Advanced Materials · doi:10.1002/adma.201903813 · Cited by 377
Zhang, Z., Peng, H., Zhao, M., & Huang, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707536 · Cited by 357
Li, Z., He, Q., Xu, X., Zhao, Y., Liu, X., Zhou, C., Ai, D., Xia, L., & Mai, L. (2018) · Advanced Materials · doi:10.1002/adma.201804089 · Cited by 338
Wang, H., Zhang, Q., Yao, H., Liang, Z., Lee, H.-W., Hsu, P.-C., Zheng, G., & Cui, Y. (2014) · Nano Letters · doi:10.1021/nl503730c · Cited by 312
Cai, J., Song, Y., Zang, Y., Niu, S., Wu, Y., Xie, Y., Zheng, X., Liu, Y., Lin, Y., Liu, X., et al. (2020) · Science Advances · doi:10.1126/sciadv.aaw8113 · Cited by 309
Huang, S., Lim, Y. V., Zhang, X., Wang, Y., Zheng, Y., Kong, D., Ding, M., Yang, S. A., & Yang, H. Y. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.06.052 · Cited by 303
Xiang, Q., Cheng, F., & Lang, D. (2016) · ChemSusChem · doi:10.1002/cssc.201501702 · Cited by 285
Li, M., Wan, Y., Huang, J.-K., Assen, A. H., Hsiung, C.-E., Jiang, H., Han, Y., Eddaoudi, M., Lai, Z., Ming, J., et al. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00692 · Cited by 282
Ouyang, C., Wang, X., & Wang, S. (2015) · Chemical Communications · doi:10.1039/c5cc05541e · Cited by 265
Zhang, C., Biendicho, J. J., Zhang, T., Du, R., Li, J., Yang, X., Arbiol, J., Zhou, Y., Morante, J. R., & Cabot, A. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201903842 · Cited by 232
He, J., Chen, Y., & Manthiram, A. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900584 · Cited by 226
Xing, Z., Han, C., Wang, D., Li, Q., & Yang, X. (2017) · ACS Catalysis · doi:10.1021/acscatal.7b01994 · Cited by 222
Shi, H., Lv, W., Zhang, C., Wang, D., Ling, G., He, Y., Kang, F., & Yang, Q. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201800508 · Cited by 205
S-Doped MoP Nanoporous Layer Toward High-Efficiency Hydrogen Evolution in pH-Universal Electrolyte
Liang, K., Pakhira, S., Yang, Z., Nijamudheen, A., Ju, L., Wang, M., Aguirre-Velez, C. I., Sterbinsky, G. E., Du, Y., Feng, Z., et al. (2019) · ACS Catalysis · doi:10.1021/acscatal.8b04291 · Cited by 203
Self-citationLin, H., Zhang, S., Zhang, T., Ye, H., Yao, Q., Zheng, G. W., & Lee, J. Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801868 · Cited by 199
Li, R., Zhou, X., Shen, H., Yang, M., & Li, C. (2019) · ACS Nano · doi:10.1021/acsnano.9b02231 · Cited by 194
Wu, D. S., Shi, F., Zhou, G., Zu, C., Liu, C., Liu, K., Liu, Y., Wang, J., Peng, Y., & Cui, Y. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.01.020 · Cited by 193
Li, X., Ding, K., Gao, B., Li, Q., Li, Y., Fu, J., Zhang, X., Chu, P. K., & Huo, K. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.09.018 · Cited by 188
Shen, Z., Cao, M., Zhang, Z., Pu, J., Zhong, C., Li, J., Ma, H., Li, F., Zhu, J., Pan, F., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201906661 · Cited by 188
Hao, G., Tang, C., Zhang, E., Zhai, P., Yin, J., Zhu, W., Zhang, Q., & Kaskel, S. (2017) · Advanced Materials · doi:10.1002/adma.201702829 · Cited by 169
Hollow cobalt sulfide polyhedra-enabled long-life, high areal-capacity lithium-sulfur batteries
Xu, H., & Manthiram, A. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.01.007 · Cited by 162
Lv, L., Guo, C., Sun, W., & Wang, Y. (2018) · Small · doi:10.1002/smll.201804338 · Cited by 150
Jeong, Y. C., Kim, J. H., Kwon, S. H., Oh, J. Y., Park, J., Jung, Y., Lee, S. G., Yang, S. J., & Park, C. R. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta08153g · Cited by 135
In-situ PECVD-enabled graphene-V2O3 hybrid host for lithium–sulfur batteries
Song, Y., Zhao, W. J., Wei, N., et al. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.09.002 · Cited by 114
Cheng, J., Zhao, D., Fan, L., Wu, X., Wang, M., Zhang, N., & Sun, K. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta03236f · Cited by 96
Self-citationNovel Non‐Carbon Sulfur Hosts Based on Strong Chemisorption for Lithium–Sulfur Batteries
Zhu, Y., Wang, S., Miao, Z., Liu, Y., & Chou, S. (2018) · Small · doi:10.1002/smll.201801987 · Cited by 92
Li, X., Gao, B., Huang, X. L., Guo, Z., Li, Q., Zhang, X., Chu, P. K.-H., & Huo, K. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b17376 · Cited by 71
Luo, R., Yu, Q., Lu, Y. M., Zhang, M., Peng, T., Yan, H., Liu, X., Kim, J., & Luo, Y. (2018) · Nanoscale Horizons · doi:10.1039/c8nh00343b · Cited by 60
Cited by
Han, Z., Gao, R., Wang, T., Tao, S., Jia, Y., Lao, Z., Zhang, M., Zhou, J., Li, C., Piao, Z., et al. (2023) · Nature Catalysis · doi:10.1038/s41929-023-01041-z · Cited by 358
Defect Engineering for Expediting Li–S Chemistry: Strategies, Mechanisms, and Perspectives
Shi, Z., Li, M., Sun, J., & Chen, Z. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202100332 · Cited by 269
Huang, J., Wang, S., Nie, J., Huang, C., Zhang, X., Wang, B., Tang, J., Du, C., Liu, Z., & Chen, J. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.128055 · Cited by 96
Metadata
- Authors
- Wang, M., Fan, L., Sun, X., Guan, B., Jiang, B., Wu, X., Tian, D., Sun, K., Qiu, Y., Yin, X., Zhang, Y., & Zhang, N.
- Venue
- ACS Energy Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-08-27
- Volume
- 5
- Issue
- 9
- Pages
- 3041-3050
- ISSN
- 2380-8195 (ISSN-L)
- OpenAlex
- W3081677589
- Cited by
- 312
- References
- 45
- FWCI
- 15.36
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.