High-Dielectric Polymer Coating for Uniform Lithium Deposition in Anode-Free Lithium Batteries
The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.
Abstract
The use of lithium metal either in an anode or anode-free configuration is envisaged as the most promising way to boost the energy density of the current lithium-ion battery system. Nevertheless, the uncontrolled lithium dendritic growth inhibits practical utilization of lithium metal as an anode due to safety concerns and low Coulombic efficiency. In this work, we show that when a high-dielectric SEI is coated on a current collector, it can effectively promote a uniform lithium deposition by decreasing the overpotential between the surfaces, lowering the local current density and suppressing lithium protrusions. Using a PVDF (polyvinylidene difluoride)-based dielectric medium, it is demonstrated that varying the dielectric properties of PVDF by crystallinity control can regulate the lithium deposition mechanisms. Moreover, when the dielectric properties of PVDF film are tailored by the inclusion of dielectric nanoparticles, a selective formation of high-dielectric β-PVDF phase is induced during its film formation (LiF@PVDF), which synergistically promotes uniform lithium deposition/stripping in an anode-free half-cell setup.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrochemical Methods: Fundamentals and Applications
Bard, A. J., & Faulkner, L. R. (1980) · Cited by 22,844
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Opportunities and challenges for a sustainable energy future
Chu, S., & Majumdar, A. (2012) · Nature · doi:10.1038/nature11475 · Cited by 12,550
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Electroactive phases of poly(vinylidene fluoride): Determination, processing and applications
Martins, P., Lopes, A. C., & Lanceros-Mendez, S. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.07.006 · Cited by 3,494
Selective deposition and stable encapsulation of lithium through heterogeneous seeded growth
Yan, K., Lu, Z., Lee, H.-W., Xiong, F., Hsu, P.-C., Li, Y., Zhao, J., Chu, S., & Cui, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2016.10 · Cited by 2,116
Albertus, P., Babinec, S., Litzelman, S., & Newman, A. (2017) · Nature Energy · doi:10.1038/s41560-017-0047-2 · Cited by 1,888
A critical analysis of the α, β and γ phases in poly(vinylidene fluoride) using FTIR
Cai, X., Lei, T., Sun, D., & Lin, L. (2017) · RSC Advances · doi:10.1039/c7ra01267e · Cited by 1,788
Nanoscale Nucleation and Growth of Electrodeposited Lithium Metal
Pei, A., Zheng, G., Shi, F., Li, Y., & Cui, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04755 · Cited by 1,726
Stable lithium electrodeposition in liquid and nanoporous solid electrolytes
Lu, Y., Tu, Z., & Archer, L. A. (2014) · Nature Materials · doi:10.1038/nmat4041 · Cited by 1,592
Transition of lithium growth mechanisms in liquid electrolytes
Bai, P., Li, J., Brushett, F. R., & Bazant, M. Z. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01674j · Cited by 1,591
An Artificial Solid Electrolyte Interphase Layer for Stable Lithium Metal Anodes
Li, N., Yin, Y., Yang, C., & Guo, Y. (2016) · Advanced Materials · doi:10.1002/adma.201504526 · Cited by 1,577
The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth
Li, W., Yao, H., Yan, K., Zheng, G., Liang, Z., Chiang, Y.-M., & Cui, Y. (2015) · Nature Communications · doi:10.1038/ncomms8436 · Cited by 1,540
Gregorio, Jr., & Cestari, M. (1994) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.1994.090320509 · Cited by 1,163
Salimi, A., & Yousefi, A. A. (2003) · Polymer Testing · doi:10.1016/s0142-9418(03)00003-5 · Cited by 1,025
Liu, Y., Lin, D., Yuen, P. Y., Liu, K., Xie, J., Dauskardt, R. H., & Cui, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605531 · Cited by 990
Dendritic growth mechanisms in lithium/polymer cells
Brissot, C., Rosso, M., Chazalviel, J.-N., & Lascaud, S. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00242-0 · Cited by 945
History, Evolution, and Future Status of Energy Storage
Whittingham, M. S. (2012) · Proceedings of the IEEE · doi:10.1109/jproc.2012.2190170 · Cited by 873
Next-Generation Lithium Metal Anode Engineering via Atomic Layer Deposition
Kozen, A. C., Lin, C.-F., Pearse, A. J., Schroeder, M. A., Han, X., Hu, L., Lee, S.-B., Rubloff, G. W., & Noked, M. (2015) · ACS Nano · doi:10.1021/acsnano.5b02166 · Cited by 816
Anode‐Free Rechargeable Lithium Metal Batteries
Qian, J., Adams, B. D., Zheng, J., Xu, W., Henderson, W. A., Wang, J., Bowden, M. E., Xu, S., Hu, J., & Zhang, J. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602353 · Cited by 746
Yan, K., Lee, H.-W., Gao, T., Zheng, G., Yao, H., Wang, H., Lu, Z., Zhou, Y., Liang, Z., Liu, Z., et al. (2014) · Nano Letters · doi:10.1021/nl503125u · Cited by 742
Artificial Soft–Rigid Protective Layer for Dendrite‐Free Lithium Metal Anode
Xu, R., Zhang, X., Cheng, X., Peng, H., Zhao, C., Yan, C., & Huang, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705838 · Cited by 670
Sand, H. J. S. (1901) · The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science · doi:10.1080/14786440109462590 · Cited by 665
α to β Phase Transformation and Microestructural Changes of PVDF Films Induced by Uniaxial Stretch
Sencadas, V., Gregorio, R., & Lanceros-Méndez, S. (2009) · Journal of Macromolecular Science, Part B · doi:10.1080/00222340902837527 · Cited by 607
Zhu, B., Jin, Y., Hu, X., Zheng, Q., Zhang, S., Wang, Q., & Zhu, J. (2017) · Advanced Materials · doi:10.1002/adma.201603755 · Cited by 587
Liu, Y., Lin, D., Li, Y., Chen, G., Pei, A., Nix, O., Li, Y., & Cui, Y. (2018) · Nature Communications · doi:10.1038/s41467-018-06077-5 · Cited by 570
Diagnosing and correcting anode-free cell failure via electrolyte and morphological analysis
Louli, A. J., Eldesoky, A., Weber, R., Genovese, M., Coon, M., deGooyer, J., Deng, Z., White, R. T., Lee, J., Rodgers, T., et al. (2020) · Nature Energy · doi:10.1038/s41560-020-0668-8 · Cited by 570
Lithium Metal Anodes with an Adaptive “Solid-Liquid” Interfacial Protective Layer
Liu, K., Pei, A., Lee, H. R., Kong, B., Liu, N., Lin, D., Liu, Y., Liu, C., Hsu, P.-C., Bao, Z., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b13314 · Cited by 560
Anode‐Free Full Cells: A Pathway to High‐Energy Density Lithium‐Metal Batteries
Nanda, S., Gupta, A., & Manthiram, A. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000804 · Cited by 537
Wang, J., Huang, W., Pei, A., Li, Y., Shi, F., Yu, X., & Cui, Y. (2019) · Nature Energy · doi:10.1038/s41560-019-0413-3 · Cited by 528
Characterization of PVDF membranes by vibrational spectroscopy
Boccaccio, T., Bottino, A., Capannelli, G., & Piaggio, P. (2002) · Journal of Membrane Science · doi:10.1016/s0376-7388(02)00407-6 · Cited by 507
Gomes, J., Serrado Nunes, J., Sencadas, V, & Lanceros-Mendez, S. (2010) · Smart Materials and Structures · doi:10.1088/0964-1726/19/6/065010 · Cited by 489
Stabilizing Lithium Metal Anodes by Uniform Li-Ion Flux Distribution in Nanochannel Confinement
Liu, W., Lin, D., Pei, A., & Cui, Y. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b08730 · Cited by 455
Fluorinated hybrid solid-electrolyte-interphase for dendrite-free lithium deposition
Pathak, R., Chen, K., Gurung, A., Reza, K. M., Bahrami, B., Pokharel, J., Baniya, A., He, W., Wu, F., Zhou, Y., et al. (2020) · Nature Communications · doi:10.1038/s41467-019-13774-2 · Cited by 455
Effects of Polymer Coatings on Electrodeposited Lithium Metal
Lopez, J., Pei, A., Oh, J. Y., Wang, G.-J. N., Cui, Y., & Bao, Z. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b06047 · Cited by 452
Conformational changes and phase transformation mechanisms in PVDF solution‐cast films
Salimi, A., & Yousefi, A. A. (2004) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.20223 · Cited by 426
Luo, J., Fang, C., & Wu, N. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701482 · Cited by 390
Kazyak, E., Wood, K. N., & Dasgupta, N. P. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b02789 · Cited by 356
Fast lithium growth and short circuit induced by localized-temperature hotspots in lithium batteries
Zhu, Y., Xie, J., Pei, A., Liu, B., Wu, Y., Lin, D., Li, J., Wang, H., Chen, H., Xu, J., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-09924-1 · Cited by 330
High-Performance Lithium Metal Negative Electrode with a Soft and Flowable Polymer Coating
Zheng, G., Wang, C., Pei, A., Lopez, J., Shi, F., Chen, Z., Sendek, A. D., Lee, H.-W., Lu, Z., Schneider, H., et al. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00456 · Cited by 328
Polymorphism Control of Poly(vinylidene fluoride) through Electrospinning
Zheng, J., He, A., Li, J., & Han, C. C.-C. (2007) · Macromolecular Rapid Communications · doi:10.1002/marc.200700544 · Cited by 310
Overview of the Development of the Fluoropolymer Industry
Teng, H. (2012) · Applied Sciences · doi:10.3390/app2020496 · Cited by 303
Polymer composites and blends for battery separators: State of the art, challenges and future trends
Nunes‐Pereira, J., Costa, C. M., & Lanceros-Méndez, S. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.02.010 · Cited by 278
Perspectives on external electric fields in molecular simulation: progress, prospects and challenges
English, N. J., & Waldron, C. J. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c5cp00629e · Cited by 273
Effect of Electrospinning on the Ferroelectric Phase Content of Polyvinylidene Difluoride Fibers
Andrew, J. S., & Clarke, D. R. (2008) · Langmuir · doi:10.1021/la7035407 · Cited by 265
A Dynamic, Electrolyte-Blocking, and Single-Ion-Conductive Network for Stable Lithium-Metal Anodes
Yu, Z., Mackanic, D. G., Michaels, W., Lee, M., Pei, A., Feng, D., Zhang, Q., Tsao, Y., Amanchukwu, C. V., Yan, X., et al. (2019) · Joule · doi:10.1016/j.joule.2019.07.025 · Cited by 253
An infrared study of phase-III poly(vinylidene fluoride)
Bachmann, M. A., Gordon, W. L., Koenig, J. L., & Lando, J. B. (1979) · Journal of Applied Physics · doi:10.1063/1.325780 · Cited by 237
Robust Pinhole-free Li3N Solid Electrolyte Grown from Molten Lithium
Li, Y., Sun, Y., Pei, A., Chen, K., Vailionis, A., Li, Y., Zheng, G., Sun, J., & Cui, Y. (2018) · ACS Central Science · doi:10.1021/acscentsci.7b00480 · Cited by 236
Revisiting the Electroplating Process for Lithium‐Metal Anodes for Lithium‐Metal Batteries
Sun, X., Zhang, X., Ma, Q., Guan, X., Wang, W., & Luo, J. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201912217 · Cited by 210
3D Printing of BaTiO3/PVDF Composites with Electric In Situ Poling for Pressure Sensor Applications
Kim, H., Torres, F., Villagran, D., Stewart, C., Lin, Y., & Tseng, T. B. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201700229 · Cited by 177
Dielectric Modification of 5V‐Class Cathodes for High‐Voltage All‐Solid‐State Lithium Batteries
Yada, C., Ohmori, A., Ide, K., Yamasaki, H., Kato, T., Saito, T., Sagane, F., & Iriyama, Y. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301416 · Cited by 177
Optimizing Cycling Conditions for Anode-Free Lithium Metal Cells
Louli, A. J., Coon, M., Genovese, M., deGooyer, J., Eldesoky, A., & Dahn, J. R. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abe089 · Cited by 157
Arshad, A. N., Wahid, M. H. M., RUSOP, M., Majid, W. H. A., Subban, R. Y., & Dahan, R. M. (2019) · Journal of Nanomaterials · doi:10.1155/2019/5961563 · Cited by 142
Hattori, T., Kanaoka, M., & Ohigashi, H. (1996) · Journal of Applied Physics · doi:10.1063/1.361055 · Cited by 139
Mokhtari, F., Shamshirsaz, M., & Latifi, M. (2015) · Polymer Engineering and Science · doi:10.1002/pen.24192 · Cited by 85
Elastic properties of poly(vinyldene fluoride) (PVDF) crystals: A density functional theory study
Pei, Y., & Zeng, X. C. (2011) · Journal of Applied Physics · doi:10.1063/1.3574653 · Cited by 68
Recent development in lithium metal anodes of liquid-state rechargeable batteries
Liu, S., Wang, X., Xie, D., Xia, X. H., Gu, C., Wu, J., & Tu, J. P. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.09.204 · Cited by 56
Simple and Effective Gas-Phase Doping for Lithium Metal Protection in Lithium Metal Batteries
Moon, S., Park, H., Yoon, G., et al. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b03027 · Cited by 41
Self-citation
Cited by
Anode‐Free Solid‐State Lithium Batteries: A Review
Huang, W., Zhao, C., Wu, P., Yuan, H., Feng, W., Liu, Z., Lu, Y., Sun, S., Fu, Z., Hu, J., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202201044 · Cited by 278
From Liquid to Solid-State Lithium Metal Batteries: Fundamental Issues and Recent Developments
Zhang, Z., & Han, W.-Q. (2024) · Nano-Micro Letters · doi:10.1007/s40820-023-01234-y · Cited by 180
Metadata
- Authors
- Tamwattana, O., Park, H., Kim, J., Hwang, I., Yoon, G., Hwang, T.-H., Kang, Y.-S., Park, J., Meethong, N., & Kang, K.
- Venue
- ACS Energy Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-11-18
- Volume
- 6
- Issue
- 12
- Pages
- 4416-4425
- ISSN
- 2380-8195 (ISSN-L)
- OpenAlex
- W3217159733
- Cited by
- 165
- References
- 59
- FWCI
- 6.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.