The DOI matches its Crossref record; 54 of the 54 references it cites were found in a registry or an index.
Highly Air-Stable Carbon-Based α-CsPbI3 Perovskite Solar Cells with a Broadened Optical Spectrum
Abstract
Inorganic cesium lead halide perovskites with superb thermal stability show promise to fabricate long-term operational photovoltaic devices. However, the cubic phase (α) of CsPbI 3 with an appropriate band gap is unstable in air. We discover that highly stable α-CsPbI 3 can be obtained in dry air (temperature: 20–30 °C; humidity: 10–20%) by replacing PbI 2 with HPbI 3 in a one-step deposition solution. Furthermore, the band gap of HPbI 3 -processed α-CsPbI 3 is advantageously reduced from 1.72 to 1.68 eV due to the existence of tensile lattice strain. By employing such an α-CsPbI 3 film in carbon-based perovskite solar cells (C-PSCs), a power conversion efficiency (PCE) of 9.5% is achieved, which is a record value for the α-CsPbI 3 PSCs without hole transport material. Most importantly, over 90% of the initial PCE is retained for nonencapsulated devices after 3000 h of storage in dry air. Therefore, HPbI 3 -based one-step deposition presents a promising strategy to prepare high-performance and air-stable α-CsPbI 3 PSCs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Protesescu, L., Yakunin, S., Bodnarchuk, M. I., Krieg, F., Caputo, R., Hendon, C. H., Yang, R. X., Walsh, A., & Kovalenko, M. V. (2015) · Nano Letters · doi:10.1021/nl5048779 · Cited by 9,209
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Increasing Solar Absorption for Photocatalysis with Black Hydrogenated Titanium Dioxide Nanocrystals
Chen, X., Liu, L., Yu, P. Y., & Mao, S. S. (2011) · Science · doi:10.1126/science.1200448 · Cited by 6,245
Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells
Yang, W. S., Park, B.-W., Jung, E. H., Jeon, N. J., Kim, Y. C., Lee, D. U., Shin, S. S., Seo, J., Kim, E. K., Noh, J. H., et al. (2017) · Science · doi:10.1126/science.aan2301 · Cited by 5,445
A hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stability
Mei, A., Li, X., Liu, L., Ku, Z., Liu, T., Rong, Y., Xu, M., Hu, M., Chen, J., Yang, Y., et al. (2014) · Science · doi:10.1126/science.1254763 · Cited by 3,043
Quantum dot–induced phase stabilization of α-CsPbI 3 perovskite for high-efficiency photovoltaics
Swarnkar, A., Marshall, A. R., Sanehira, E. M., Chernomordik, B. D., Moore, D. T., Christians, J. A., Chakrabarti, T., & Luther, J. M. (2016) · Science · doi:10.1126/science.aag2700 · Cited by 2,794
Enhancement of Ferroelectricity in Strained BaTiO 3 Thin Films
Choi, K. J., Biegalski, M., Li, Y. L., Sharan, A., Schubert, J., Uecker, R., Reiche, P., Chen, Y. B., Pan, X. Q., Gopalan, V., et al. (2004) · Science · doi:10.1126/science.1103218 · Cited by 1,961
Inorganic caesium lead iodide perovskite solar cells
Eperon, G. E., Paternò, G. M., Sutton, R. J., Zampetti, A., Haghighirad, A. A., Cacialli, F., & Snaith, H. J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta06398a · Cited by 1,852
Organometal halide perovskite solar cells: degradation and stability
Berhe, T. A., Su, W.-N., Chen, C.-H., Pan, C.-J., Cheng, J.-H., Chen, H.-M., Tsai, M.-C., Chen, L.-Y., Dubale, A. A., & Hwang, B.-J. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02733k · Cited by 1,779
Self-citationGrowth of CH3NH3PbI3 cuboids with controlled size for high-efficiency perovskite solar cells
Im, J.-H., Jang, I.-H., Pellet, N., Grätzel, M., & Park, N.-G. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.181 · Cited by 1,759
Bandgap‐Tunable Cesium Lead Halide Perovskites with High Thermal Stability for Efficient Solar Cells
Sutton, R. J., Eperon, G. E., Miranda, L., Parrott, E. S., Kamino, B. A., Patel, J. B., Hörantner, M. T., Johnston, M. B., Haghighirad, A. A., Moore, D. T., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502458 · Cited by 1,571
Understanding the physical properties of hybrid perovskites for photovoltaic applications
Huang, J., Yuan, Y., Shao, Y., & Yan, Y. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.42 · Cited by 1,252
All-Inorganic Perovskite Solar Cells
Liang, J., Wang, C., Wang, Y., Xu, Z., Lu, Z., Ma, Y., Zhu, H., Hu, Y., Xiao, C., Yi, X., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b10227 · Cited by 1,089
Self-citationConsensus stability testing protocols for organic photovoltaic materials and devices
Reese, M. O., Gevorgyan, S. A., Jørgensen, M., Bundgaard, E., Kurtz, S. R., Ginley, D. S., Olson, D. C., Lloyd, M. T., Morvillo, P., Katz, E. A., et al. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.01.036 · Cited by 989
Enhanced mobility CsPbI 3 quantum dot arrays for record-efficiency, high-voltage photovoltaic cells
Sanehira, E. M., Marshall, A. R., Christians, J. A., Harvey, S. P., Ciesielski, P. N., Wheeler, L. M., Schulz, P., Lin, L. Y., Beard, M. C., & Luther, J. M. (2017) · Science Advances · doi:10.1126/sciadv.aao4204 · Cited by 977
Ku, Z., Rong, Y., Xu, M., Liu, T., & Han, H. (2013) · Scientific Reports · doi:10.1038/srep03132 · Cited by 877
Juarez-Perez, E. J., Hawash, Z., Raga, S. R., Ono, L. K., & Qi, Y. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02016j · Cited by 761
Marronnier, A., Roma, G., Boyer-Richard, S., Pedesseau, L., Jancu, J.-M., Bonnassieux, Y., Katan, C., Stoumpos, C. C., Kanatzidis, M. G., & Even, J. (2018) · ACS Nano · doi:10.1021/acsnano.8b00267 · Cited by 753
Li, B., Zhang, Y., Fu, L., Yu, T., Zhou, S., Zhang, L., & Yin, L. (2018) · Nature Communications · doi:10.1038/s41467-018-03169-0 · Cited by 675
The Raman Spectrum of the CH3NH3PbI3 Hybrid Perovskite: Interplay of Theory and Experiment
Quarti, C., Grancini, G., Mosconi, E., Bruno, P., Ball, J. M., Lee, M. M., Snaith, H. J., Petrozza, A., & De Angelis, F. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz402589q · Cited by 654
Zhang, T., Dar, M. I., Li, G., Xu, F., Guo, N., Grätzel, M., & Zhao, Y. (2017) · Science Advances · doi:10.1126/sciadv.1700841 · Cited by 647
Tuning the Light Emission Properties by Band Gap Engineering in Hybrid Lead Halide Perovskite
D’Innocenzo, V., Srimath Kandada, A. R., De Bastiani, M., Gandini, M., & Petrozza, A. (2014) · Journal of the American Chemical Society · doi:10.1021/ja511198f · Cited by 623
Thermal Behavior of Methylammonium Lead-Trihalide Perovskite Photovoltaic Light Harvesters
Dualeh, A., Gao, P., Seok, S. I., Nazeeruddin, M. K., & Grätzel, M. (2014) · Chemistry of Materials · doi:10.1021/cm502468k · Cited by 574
Wang, Q., Zheng, X., Deng, Y., Zhao, J., Chen, Z., & Huang, J. (2017) · Joule · doi:10.1016/j.joule.2017.07.017 · Cited by 544
Understanding charge transport in lead iodide perovskite thin-film field-effect transistors
Senanayak, S. P., Yang, B., Thomas, T. H., Giesbrecht, N., Huang, W., Gann, E., Nair, B., Goedel, K., Guha, S., Moya, X., et al. (2017) · Science Advances · doi:10.1126/sciadv.1601935 · Cited by 454
Ma, Q., Huang, S., Wen, X., Green, M. A., & Ho‐Baillie, A. W. Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502202 · Cited by 433
Chen, C., Lin, H., Chiang, K., Tsai, W., Huang, Y., Tsao, C., & Lin, H. (2017) · Advanced Materials · doi:10.1002/adma.201605290 · Cited by 395
Solvent Engineering for Ambient-Air-Processed, Phase-Stable CsPbI3 in Perovskite Solar Cells
Luo, P., Xia, W., Zhou, S., Sun, L., Cheng, J., Xu, C., & Lu, Y. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b01576 · Cited by 384
Chen, H., & Yang, S. (2017) · Advanced Materials · doi:10.1002/adma.201603994 · Cited by 384
Self-citationLi, X., Tschumi, M., Han, H., Babkair, S. S., Alzubaydi, R. A., Ansari, A. A., Habib, S. S., Nazeeruddin, M. K., Zakeeruddin, S. M., & Grätzel, M. (2015) · Energy Technology · doi:10.1002/ente.201500045 · Cited by 379
Inorganic CsPbI3 Perovskite‐Based Solar Cells: A Choice for a Tandem Device
Ahmad, W., Khan, J., Niu, G., & Tang, J. (2017) · Solar RRL · doi:10.1002/solr.201700048 · Cited by 350
Chen, H., Wei, Z., He, H., Zheng, X., Wong, K. S., & Yang, S. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502087 · Cited by 348
Self-citationRong, Y., Hou, X., Hu, Y., Mei, A., Liu, L., Wang, P., & Han, H. (2017) · Nature Communications · doi:10.1038/ncomms14555 · Cited by 324
Frolova, L. A., Anokhin, D. V., Piryazev, A. A., Luchkin, S. Y., Dremova, N. N., Stevenson, K. J., & Troshin, P. A. (2017) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b02594 · Cited by 307
Carbon-Based CsPbBr3 Perovskite Solar Cells: All-Ambient Processes and High Thermal Stability
Chang, X., Li, W., Zhu, L., Liu, H., Geng, H., Xiang, S., Liu, J., & Chen, H. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b11393 · Cited by 285
Self-citationStrain-Induced Polarization Rotation in Epitaxial (001)BiFeO3Thin Films
Jang, H. W., Baek, S. H., Ortiz, D., Folkman, C. M., Das, R. R., Chu, Y. H., Shafer, P., Zhang, J. X., Choudhury, S., Vaithyanathan, V., et al. (2008) · Physical Review Letters · doi:10.1103/physrevlett.101.107602 · Cited by 259
CsPbIBr2 Perovskite Solar Cell by Spray-Assisted Deposition
Lau, C. F. J., Deng, X., Ma, Q., Zheng, J., Yun, J. S., Green, M. A., Huang, S., & Ho-Baillie, A. W. Y. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00341 · Cited by 255
Chen, H., Wei, Z., Zheng, X., & Yang, S. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.04.025 · Cited by 249
Self-citationTemperature-strain phase diagram for BaTiO3 thin films
Li, Y. L., & Chen, L. Q. (2006) · Applied Physics Letters · doi:10.1063/1.2172744 · Cited by 243
Lau, C. F. J., Deng, X., Zheng, J., Kim, J., Zhang, Z., Zhang, M., Bing, J., Wilkinson, B., Hu, L., Patterson, R., et al. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta11154a · Cited by 236
Nenon, D. P., Christians, J. A., Wheeler, L. M., Blackburn, J. L., Sanehira, E. M., Dou, B., Olsen, M. L., Zhu, K., Berry, J. J., & Luther, J. M. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01047d · Cited by 221
Fu, Y., Rea, M. T., Chen, J., Morrow, D. J., Hautzinger, M. P., Zhao, Y., Pan, D., Manger, L. H., Wright, J. C., Goldsmith, R. H., et al. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b02948 · Cited by 207
Nam, J. K., Jung, M. S., Chai, S. U., Choi, Y. J., Kim, D., & Park, J. H. (2017) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b01067 · Cited by 186
Tang, Z., Uchida, S., Bessho, T., Kinoshita, T., Wang, H., Awai, F., Jono, R., Maitani, M. M., Nakazaki, J., Kubo, T., et al. (2018) · Nano Energy · doi:10.1016/j.nanoen.2017.12.047 · Cited by 171
Wang, Y., Zhang, T., Xu, F., Li, Y., & Zhao, Y. (2017) · Solar RRL · doi:10.1002/solr.201700180 · Cited by 165
Pistor, P., Ruiz, A., Cabot, A., & Izquierdo‐Roca, V. (2016) · Scientific Reports · doi:10.1038/srep35973 · Cited by 149
Lou, Y., Fang, M., Chen, J., & Zhao, Y. (2018) · Chemical Communications · doi:10.1039/c8cc01110a · Cited by 140
Improved Charge Collection in Highly Efficient CsPbBrI2 Solar Cells with Light-Induced Dealloying
Niezgoda, J. S., Foley, B. J., Chen, A. Z., & Choi, J. J. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00258 · Cited by 111
Zheng, X., Wei, Z., Chen, H., Zhang, Q., He, H., Xiao, S., Fan, Z., Wong, K. S., & Yang, S. (2016) · Nanoscale · doi:10.1039/c5nr06715d · Cited by 96
Self-citationLiang, J., Wang, C., Zhao, P., Lü, Z., Ma, Y., Xu, Z., Wang, Y., Zhu, H., Hu, Y. T., Zhu, G., et al. (2017) · Nanoscale · doi:10.1039/c7nr03530f · Cited by 89
Self-citationWei, Z., Zheng, X., Chen, H., Long, X., Wang, Z., & Yang, S. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03802b · Cited by 87
Self-citationHuang, H.-C., Dadap, J. I., Herman, I. P., Bakhru, H., & Osgood, R. M. (2014) · Optical Materials Express · doi:10.1364/ome.4.000338 · Cited by 20
Cited by
Chemical stability and instability of inorganic halide perovskites
Zhou, Y., & Zhao, Y. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03559h · Cited by 784
Hossain, M. K., Rubel, M. H. K., Toki, G. F. I., Alam, I., Rahman, M. F., & Bencherif, H. (2022) · ACS Omega · doi:10.1021/acsomega.2c05912 · Cited by 648
The Role of Dimethylammonium Iodide in CsPbI3 Perovskite Fabrication: Additive or Dopant?
Wang, Y., Liu, X., Zhang, T., Wang, X., Kan, M., Shi, J., & Zhao, Y. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201910800 · Cited by 546
Recent progress of inorganic perovskite solar cells
Tai, Q., Tang, K.-C., & Yan, F. (2019) · Energy & Environmental Science · doi:10.1039/c9ee01479a · Cited by 528
Surface Engineering of Ambient-Air-Processed Cesium Lead Triiodide Layers for Efficient Solar Cells
Yoon, S. M., Min, H., Kim, J. B., Kim, G., Lee, K. S., & Seok, S. I. (2021) · Joule · doi:10.1016/j.joule.2020.11.020 · Cited by 418
Metadata
- Authors
- Xiang, S., Fu, Z., Li, W., Wei, Y., Liu, J., Liu, H., Zhu, L., Zhang, R., & Chen, H.
- Venue
- ACS Energy Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-07-09
- Volume
- 3
- Issue
- 8
- Pages
- 1824-1831
- ISSN
- 2380-8195 (ISSN-L)
- OpenAlex
- W2826355484
- Cited by
- 280
- References
- 54
- FWCI
- 15.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.