The DOI matches its Crossref record; 62 of the 62 references it cites were found in a registry or an index; 9 of the 10 sources its claims cite were checked for support.
Inverse Design of an All-Dielectric Nonlinear Polaritonic Metasurface.
Open accessAbstract
Nonlinear metasurfaces offer the ability to realize optical nonlinear devices with unparalleled properties compared to nonlinear crystals, due to the interplay between photonic resonances and materials properties. The complicated interdependency between efficiency and emission directionality of the nonlinear optical signal on the existence, localization, and lifetimes of photonic resonances, as well as on the nonlinear susceptibility, makes it extremely difficult to design optimal metasurfaces using conventional materials and geometries. Inverse design using topology optimization is a powerful design tool for photonic structures, but traditional approaches developed for linear photonics are not suitable for such high dimensional nonlinear problems. Here, we use a topology optimization approach to inverse-design a fabrication-robust nonlinear metasurface that includes quantum-engineered resonant nonlinearities in semiconductor heterostructures for efficient and directional second harmonic generation. Furthermore, we also demonstrate that under practical constraints, among all the parameters, the nonlinear modal overlap emerges as the dominant parameter that enhances conversion efficiency, a finding that contrasts with intuition-driven studies that often emphasize Purcell enhancement. Our results demonstrate an efficient approach for optimizing nonlinear processes in nanophotonic structures for classical and quantum light sources, quantum information applications, and communication.
Overview
CoChat Summary
TL;DR
The paper inverse-designs an all-dielectric nonlinear polaritonic metasurface using topology optimization with quantum-engineered intersubband transitions, simultaneously targeting SHG efficiency and normal-direction emission. The fabricated constrained design achieves record-high SHG efficiency for all-dielectric metasurfaces and shows that nonlinear modal overlap, not Purcell/high-Q enhancement, dominates under practical fabrication constraints.
Key findings
- The inverse-designed metasurface achieved a record-high SHG efficiency of 0.38 mW/W² versus 0.15 mW/W² for the cylindrical benchmark under NA = 0.85 collection; zero-order emission was 0.047 mW/W², about 10% of total SHG efficiency.
- Simulations predicted the inverse-designed structure to be ~11× more efficient than cylinders at λ_IST = 7.9 µm, and ~5× higher than the cylinder peak at λ_C; it emitted ~10% of total SH power along the normal direction, whereas cylindrical resonators had zero normal emission due to symmetry.
- Under fabrication constraints, the nonlinear modal overlap β was the dominant optimized parameter, ~40× larger than for cylinders; without constraints, topology optimization instead favored a ~9× higher Q at the fundamental, with β enhanced only ~2.6×.
- The unconstrained design was simulated to be ~17× more efficient than cylinders at 7.9 µm and ~7.5× higher than the cylinder peak, but after fabrication its measured SHG efficiency was lower than cylinders because of mode red-shifting.
Methods
- Density-based topology optimization was used with a 50 nm square grid, adjoint-method gradients, method-of-moving-asymptotes optimization, and on-the-fly filtering/binarization; optimization was sequential, first maximizing total SH power and then far-field z-component SH Poynting flux, with fabrication constraints.
- Full-wave simulations used frequency-domain finite-element COMSOL with an anisotropic Lorentzian multi-QW permittivity, Floquet boundary conditions, plane-wave ports, undepleted pump approximation, 4.2 µm period, 1.6 µm thickness, pump at 7.9 µm, and SH at 3.95 µm.
- Fabrication used epi-side-down BCB bonding to sapphire, substrate removal, electron-beam lithography with HSQ, and Cl/Ar reactive ion etching; SHG measurements used a pulsed tunable QCL (3–13 µm, 400 ns, 250 kHz) and an MCT detector with NA = 0.18 and NA = 0.85 collection.
Limitations
- The paper states simulations predicted approximately 5× larger SHG efficiency for the inverse-designed structure than experiments, attributed to fabrication imperfections.
- The unconstrained inverse-designed structure required aspect ratios of approximately 1:16 and isolated empty regions that fabrication could not fully resolve; this caused red-shifted modes, with M2 instead of M1 overlapping the IST resonance, and measured SHG efficiency lower than cylinders.
- The paper notes SHG conversion efficiency saturates at higher pump powers due to IST intensity saturation, and NA = 0.85 measurements showed sub-linear scaling because of smaller pump spot size and larger intensities.
- Evident from the text: pre-compensating for fabrication imperfections such as etching profile and blurring would require a more elaborate computational framework and is left for future studies.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
2 Valid · 4 Not valid · 0 Not checked · 74 Own results and interpretations
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“ISTs offer one of the largest χ (2) available in condensed matter systems [37]”
What the sources say
- Could not verifycites [37] sourceExperimental — accuracy not yet measured
The Results section discusses χ(2) in metasurface design and identifies InGaP as the nonlinear material used in the examples. Searches for ISTs, intersubband transitions, and a comparison of χ(2) values across condensed-matter systems found no passage addressing the claim. (LLM, conf=0.74)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“the cylindrical resonators support a magnetic dipole-type Mie mode at the pump frequency [22]”
What the sources say
- Could not verifycites [22] sourceExperimental — accuracy not yet measured
The available indexed passages are from an archive listing (section labeled “Abstract > 1.1 Articolo in rivista,” no page number), which links to a PDF but does not provide the paper’s substantive text. Searches for the magnetic dipole-type Mie mode and cylindrical resonators at the pump frequency found no passage that addresses the claim. (LLM, conf=0.76)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“the adjoint method allows us to compute the objective gradient at a similar cost to computing the objective function itself, through the solving of an adjoint partial differential equation (PDE) [47].”
What the sources say
- Could not verifycites [47] sourceExperimental — accuracy not yet measured
The paper’s modeling passage (section labeled Abstract; page unavailable) describes temporal coupled-mode theory and analytical expressions for absorption and reflectivity. Searches for the adjoint method, objective gradients, comparable computation costs, and adjoint PDEs found no passage addressing the cited claim. (LLM, conf=0.76)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Compared to the maximum SHG efficiency of the cylindrical metasurface at 𝜆 , the inverse-designed structure has ~ 5x higher SHG efficiency.”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“removing some of these isolated regions of the optimized structure significantly reduces the SHG efficiency to values below the SHG efficiency of the structure shown in Figure”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
50 more claims
Create a free account to see all 80 claims and every source verdict.
- It may state two separate claims as one. 20
- Probably not a substantial claim. 4
- The quote only partly states this claim. 2
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ FIGURES · p. 21
“The metasurface with no constraints has a peak of SHG efficiency that is approximately 17 times larger compared to the peak of the SHG efficiency of the metasurface with cylindrical resonators at pump wavelength λ IST ~ 7.9 µm.”
§ Importance of Constraints on Inverse Design · p. 9
“Compared to the peak of SHG at 𝜆 for the cylindrical metasurface, the same inverse-designed structure has approximately 7.5 times higher SHG efficiency compared to cylinders.”
Citations
Cites
Inverse design in nanophotonics
Molesky, S., Lin, Z., Piggott, A. Y., Jin, W., Vucković, J., & Rodriguez, A. W. (2018) · Nature Photonics · doi:10.1038/s41566-018-0246-9 · Cited by 1,818 · cited 2×
“The computational approaches for discovering optical structures based on desired functional characteristics have recently redefined the limits of nanophotonic devices in the linear regime [30, 31].”
BackgroundMethodSubwavelength dielectric resonators for nonlinear nanophotonics
Koshelev, K., Kruk, S., Melik-Gaykazyan, E., Choi, J.-H., Bogdanov, A., Park, H.-G., & Kivshar, Y. (2020) · Science · doi:10.1126/science.aaz3985 · Cited by 997
High- Q Quasibound States in the Continuum for Nonlinear Metasurfaces
Liu, Z., Xu, Y., Lin, Y., Xiang, J., Feng, T., Cao, Q., Li, J., Lan, S., & Liu, J. (2019) · Physical Review Letters · doi:10.1103/physrevlett.123.253901 · Cited by 863 · cited 1×
“For example, recently bound-state-in-the-continuum (BIC) photonic modes have been utilized to achieve high quality factors at the fundamental wavelength [14-17].”
BackgroundTopology optimization for nano‐photonics
Jensen, J. S., & Sigmund, O. (2011) · Laser & Photonics Reviews · doi:10.1002/lpor.201000014 · Cited by 767 · cited 2×
“The computational approaches for discovering optical structures based on desired functional characteristics have recently redefined the limits of nanophotonic devices in the linear regime [30, 31].”
BackgroundMethodObservation of intense second harmonic generation from MoS2atomic crystals
Malard, L. M., Alencar, T. V., Barboza, A. P. M., Mak, K. F., & de Paula, A. M. (2013) · Physical Review B · doi:10.1103/physrevb.87.201401 · Cited by 760
Adjoint shape optimization applied to electromagnetic design
Lalau-Keraly, C. M., Bhargava, S., Miller, O. D., & Yablonovitch, E. (2013) · Optics Express · doi:10.1364/oe.21.021693 · Cited by 753
Giant nonlinear response from plasmonic metasurfaces coupled to intersubband transitions
Lee, J., Tymchenko, M., Argyropoulos, C., Chen, P.-Y., Lu, F., Demmerle, F., Boehm, G., Amann, M.-C., Alù, A., & Belkin, M. A. (2014) · Nature · doi:10.1038/nature13455 · Cited by 669
Self-citationNonlinear metasurfaces: a paradigm shift in nonlinear optics
Krasnok, A., Tymchenko, M., & Alù, A. (2018) · Materials Today · doi:10.1016/j.mattod.2017.06.007 · Cited by 613 · cited 2×
“…support different types of localized and de-localized photonic resonances capable of dramatically enhancing light-matter interactions [5-7], enabling significant nonlinear responses over much smaller optical volumes compared to bulk crystals while relaxing cumbersome phase matching constraints [8].”
BackgroundRoadmap for Optical Metasurfaces
Kuznetsov, A. I., Brongersma, M. L., Yao, J., Chen, M. K., Levy, U., Tsai, D. P., Zheludev, N. I., Faraon, A., Arbabi, A., Yu, N., et al. (2024) · ACS Photonics · doi:10.1021/acsphotonics.3c00457 · Cited by 420
Resonant metasurfaces for generating complex quantum states
Santiago-Cruz, T., Gennaro, S. D., Mitrofanov, O., Addamane, S., Reno, J., Brener, I., & Chekhova, M. V. (2022) · Science · doi:10.1126/science.abq8684 · Cited by 326
Self-citationEnhanced Second-Harmonic Generation Using Broken Symmetry III–V Semiconductor Fano Metasurfaces
Vabishchevich, P. P., Liu, S., Sinclair, M. B., Keeler, G. A., Peake, G. M., & Brener, I. (2018) · ACS Photonics · doi:10.1021/acsphotonics.7b01478 · Cited by 295 · cited 1×
“For example, recently bound-state-in-the-continuum (BIC) photonic modes have been utilized to achieve high quality factors at the fundamental wavelength [14-17].”
BackgroundSelf-citationAnthur, A. P., Zhang, H., Paniagua-Dominguez, R., Kalashnikov, D. A., Ha, S. T., Maß, T. W. W., Kuznetsov, A. I., & Krivitsky, L. (2020) · Nano Letters · doi:10.1021/acs.nanolett.0c03601 · Cited by 244
Enhanced second-harmonic generation from magnetic resonance in AlGaAs nanoantennas
Carletti, L., Locatelli, A., Stepanenko, O., Leo, G., & De Angelis, C. (2015) · Optics Express · doi:10.1364/oe.23.026544 · Cited by 231
Self-citationArtificial Intelligence in Meta-optics
Chen, M. K., Liu, X., Sun, Y., & Tsai, D. P. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00012 · Cited by 224
Development and Application of Infrared Thermography Non-Destructive Testing Techniques
Qu, Z., Jiang, P., & Zhang, W. (2020) · Sensors · doi:10.3390/s20143851 · Cited by 223 · cited 1×
“…sources can be inverse-designed to be in the mid to long-infrared region of the electromagnetic spectrum where currently there is a lack of compact and efficient light sources for numerous applications ranging from sensing [34], non-destructive testing [35] to optical coherence tomography [36].”
BackgroundSecond harmonic generation microscopy: a powerful tool for bio-imaging
Aghigh, A., Bancelin, S., Rivard, M., Pinsard, M., Ibrahim, H., & Légaré, F. (2023) · Biophysical Reviews · doi:10.1007/s12551-022-01041-6 · Cited by 207 · cited 1×
“Second-harmonic generation (SHG) is of paramount importance for a plethora of applications ranging from nonlinear spectroscopy [1], biosensing [2], imaging [3], to pulse characterization [4].”
BackgroundCapasso, F., Sirtori, C., & Cho, A. Y. (1994) · IEEE Journal of Quantum Electronics · doi:10.1109/3.303697 · Cited by 202 · cited 1×
“ISTs offer one of the largest χ (2) available in condensed matter systems [37], and they have been recently utilized in light-matter coupled plasmonic and all-dielectric metasurfaces to achieve record-high second-order [21-23 Figure 1(a) shows a schematic of the light-matter coupled polaritonic…”
BackgroundSecond-Harmonic Generation in Resonant Nonlinear Metasurfaces Based on Lithium Niobate
Fedotova, A., Younesi, M., Sautter, J., Vaskin, A., Löchner, F. J. F., Steinert, M., Geiss, R., Pertsch, T., Staude, I., & Setzpfandt, F. (2020) · Nano Letters · doi:10.1021/acs.nanolett.0c03290 · Cited by 200
Spatially entangled photon pairs from lithium niobate nonlocal metasurfaces
Zhang, J., Ma, J., Parry, M., Cai, M., Camacho-Morales, R., Xu, L., Neshev, D. N., & Sukhorukov, A. A. (2022) · Science Advances · doi:10.1126/sciadv.abq4240 · Cited by 195
Roadmap on photonic metasurfaces
Schulz, S. A., Oulton, R. F., Kenney, M., Alù, A., Staude, I., Bashiri, A., Fedorova, Z., Kołkowski, R., Koenderink, A. F., Xiao, X., et al. (2024) · Applied Physics Letters · doi:10.1063/5.0204694 · Cited by 192 · cited 1×
“…can support different types of localized and de-localized photonic resonances capable of dramatically enhancing light-matter interactions [5-7], enabling significant nonlinear responses over much smaller optical volumes compared to bulk crystals while relaxing cumbersome phase matching…”
BackgroundSelf-citationPhoton Pairs from Resonant Metasurfaces
Santiago-Cruz, T., Fedotova, A., Sultanov, V., Weissflog, M. A., Arslan, D., Younesi, M., Pertsch, T., Staude, I., Setzpfandt, F., & Chekhova, M. (2021) · Nano Letters · doi:10.1021/acs.nanolett.1c01125 · Cited by 191
Cavity-enhanced second-harmonic generation via nonlinear-overlap optimization
Lin, Z., Liang, X., Lončar, M., Johnson, S. G., & Rodriguez, A. W. (2016) · Optica · doi:10.1364/optica.3.000233 · Cited by 179
Self-citationFundamental limits to optical response in absorptive systems
Miller, O. D., Polimeridis, A. G., Homer Reid, M. T., Hsu, C. W., DeLacy, B. G., Joannopoulos, J. D., Soljačić, M., & Johnson, S. G. (2016) · Optics Express · doi:10.1364/oe.24.003329 · Cited by 171 · cited 1×
“As described further below, while such an approach can predict structures which are close to being global optima [44-46], during the optimization process, we apply filters to enforce constraints incorporating fabrication limitations such as the minimum feature size, slanting, aspect ratios etc.”
MethodNext-generation mid-infrared sources
Jung, D., Bank, S., Lee, M. L., & Wasserman, D. (2017) · Journal of Optics · doi:10.1088/2040-8986/aa939b · Cited by 167 · cited 1×
“…sources can be inverse-designed to be in the mid to long-infrared region of the electromagnetic spectrum where currently there is a lack of compact and efficient light sources for numerous applications ranging from sensing [34], non-destructive testing [35] to optical coherence tomography [36].”
BackgroundPhased-array sources based on nonlinear metamaterial nanocavities
Wolf, O., Campione, S., Benz, A., Ravikumar, A. P., Liu, S., Luk, T. S., Kadlec, E. A., Shaner, E. A., Klem, J. F., Sinclair, M. B., et al. (2015) · Nature Communications · doi:10.1038/ncomms8667 · Cited by 136
Self-citationApplications of Surface Second Harmonic Generation in Biological Sensing
Tran, R. J., Sly, K. L., & Conboy, J. C. (2017) · Annual Review of Analytical Chemistry · doi:10.1146/annurev-anchem-071015-041453 · Cited by 134 · cited 1×
“Second-harmonic generation (SHG) is of paramount importance for a plethora of applications ranging from nonlinear spectroscopy [1], biosensing [2], imaging [3], to pulse characterization [4].”
BackgroundShaping the Radiation Pattern of Second-Harmonic Generation from AlGaAs Dielectric Nanoantennas
Carletti, L., Locatelli, A., Neshev, D. N., & Angelis, C. D. (2016) · ACS Photonics · doi:10.1021/acsphotonics.6b00050 · Cited by 113
Self-citationUltrathin Second‐Harmonic Metasurfaces with Record‐High Nonlinear Optical Response
Lee, J., Nookala, N., Gomez-Diaz, J. S., Tymchenko, M., Demmerle, F., Boehm, G., Amann, M., Alù, A., & Belkin, M. A. (2016) · Advanced Optical Materials · doi:10.1002/adom.201500723 · Cited by 111
Self-citationSecond harmonic generation spectroscopy on two-dimensional materials [Invited]
Wang, Y., Xiao, J., Yang, S., Wang, Y., & Zhang, X. (2019) · Optical Materials Express · doi:10.1364/ome.9.001136 · Cited by 98
Tailoring Second-Harmonic Emission from (111)-GaAs Nanoantennas
Sautter, J., Xu, L., Miroshnichenko, A. E., Lysevych, M., Volkovskaya, I. I., Smirnova, D. A., Camacho‐Morales, R., Kamali, K. Z., Karouta, F., Vora, K. D., et al. (2019) · Nano Letters · doi:10.1021/acs.nanolett.9b01112 · Cited by 83 · cited 1×
“While control of emission directionality of SH signals has been explored using different materials [24], crystal orientations of III-V semiconductors [25], oblique-incident pump angles, and resonator designs [26-29], the total SHG efficiency of dielectric metasurfaces was not shown to be…”
BackgroundMid-infrared optical coherence tomography
Colley, C. S., Hebden, J. C., Delpy, D. T., Cambrey, A. D., Brown, R. A., Zibik, E. A., Ng, W. H., Wilson, L. R., & Cockburn, J. W. (2007) · Review of Scientific Instruments · doi:10.1063/1.2821609 · Cited by 81 · cited 1×
“…sources can be inverse-designed to be in the mid to long-infrared region of the electromagnetic spectrum where currently there is a lack of compact and efficient light sources for numerous applications ranging from sensing [34], non-destructive testing [35] to optical coherence tomography [36].”
BackgroundUltrafast optical switching and power limiting in intersubband polaritonic metasurfaces
Mann, S. A., Nookala, N., Johnson, S. C., Cotrufo, M., Mekawy, A., Klem, J. F., Brener, I., Raschke, M. B., Alù, A., & Belkin, M. A. (2021) · Optica · doi:10.1364/optica.415581 · Cited by 58
Self-citationInverse-designed photonic fibers and metasurfaces for nonlinear frequency conversion [Invited]
Sitawarin, C., Jin, W., Lin, Z., & Rodríguez, A. W. (2018) · Photonics Research · doi:10.1364/prj.6.000b82 · Cited by 57
Self-citationGlobal T operator bounds on electromagnetic scattering: Upper bounds on far-field cross sections
Molesky, S., Chao, P., Jin, W., & Rodríguez, A. W. (2020) · Physical Review Research · doi:10.1103/physrevresearch.2.033172 · Cited by 56
Self-citationGomez-Diaz, J. S., Tymchenko, M., Lee, J., Belkin, M. A., & Alù, A. (2015) · Physical Review B · doi:10.1103/physrevb.92.125429 · Cited by 55 · cited 1×
“Figure 5(f) also shows that SHG conversion efficiency saturates at higher pump powers; this effect has previously been observed in plasmonic intersubband metasurfaces and explained by the intensity saturation of the ISTs [48].”
BackgroundSelf-citationAn All-Dielectric Polaritonic Metasurface with a Giant Nonlinear Optical Response
Sarma, R., Xu, J., de Ceglia, D., Carletti, L., Campione, S., Klem, J., Sinclair, M. B., Belkin, M. A., & Brener, I. (2022) · Nano Letters · doi:10.1021/acs.nanolett.1c03325 · Cited by 51
Self-citationStereo Vision Meta-Lens-Assisted Driving Vision
Liu, X., Li, W., Yamaguchi, T., Geng, Z., Tanaka, T., Tsai, D. P., & Chen, M. K. (2024) · ACS Photonics · doi:10.1021/acsphotonics.3c01594 · Cited by 46
Fan, Y., Chen, M. K., Qiu, M., Lin, R., Xu, Y., Wen, J., Tang, T., Liu, X., Jin, W., Tsai, D. P., et al. (2021) · Laser & Photonics Review · doi:10.1002/lpor.202100425 · Cited by 43
Sarma, R., de Ceglia, D., Nookala, N., Vincenti, M. A., Campione, S., Wolf, O., Scalora, M., Sinclair, M. B., Belkin, M. A., & Brener, I. (2019) · ACS Photonics · doi:10.1021/acsphotonics.9b00114 · Cited by 40
Self-citationVertical Second Harmonic Generation in Asymmetric Dielectric Nanoantennas
Rocco, D., Gigli, C., Carletti, L., Marino, G., Vincenti, M. A., Leo, G., & Angelis, C. D. (2020) · IEEE photonics journal · doi:10.1109/jphot.2020.2988502 · Cited by 40
Self-citationHarmonic generation with multi‐layer dielectric metasurfaces
Marino, G., Rocco, D., Gigli, C., Beaudoin, G., Pantzas, K., Suffit, S., Filloux, P. G., Sagnes, I., Leo, G., & Angelis, C. D. (2021) · Nanophotonics · doi:10.1515/nanoph-2021-0008 · Cited by 40
Second-harmonic generation in dielectric nanoparticles with different symmetries
Frizyuk, K. (2019) · Journal of the Optical Society of America B · doi:10.1364/josab.36.000f32 · Cited by 38 · cited 1×
“…of emission directionality of SH signals has been explored using different materials [24], crystal orientations of III-V semiconductors [25], oblique-incident pump angles, and resonator designs [26-29], the total SHG efficiency of dielectric metasurfaces was not shown to be significantly enhanced.”
BackgroundMaximized Frequency Doubling through the Inverse Design of Nonlinear Metamaterials
Raju, L., Lee, K., Liu, Z., Zhu, D., Zhu, M., Poutrina, E., Urbas, A. M., & Cai, W. (2022) · ACS Nano · doi:10.1021/acsnano.1c09298 · Cited by 38
Highly-Efficient Longitudinal Second-Harmonic Generation from Doubly-Resonant AlGaAs Nanoantennas
Xu, L., Rahmani, M., Smirnova, D. A., Kamali, K. Z., Zhang, G., Neshev, D. N., & Miroshnichenko, A. E. (2018) · Photonics · doi:10.3390/photonics5030029 · Cited by 26
Li, Y., Chen, Y., Li, W., Wang, P., Shao, B., Peng, Y., & Leng, Y. (2019) · Optics & Laser Technology · doi:10.1016/j.optlastec.2019.105671 · Cited by 17 · cited 1×
“Second-harmonic generation (SHG) is of paramount importance for a plethora of applications ranging from nonlinear spectroscopy [1], biosensing [2], imaging [3], to pulse characterization [4].”
BackgroundInverse Design of Nonlinear Polaritonic Metasurfaces for Second Harmonic Generation
Mann, S. A., Goh, H., & Alù, A. (2023) · ACS Photonics · doi:10.1021/acsphotonics.2c01342 · Cited by 17 · cited 2×
“While there also have been theoretical investigations of these approaches for optimizing nonlinear optical devices, including metasurfaces [32, 33], to date, there has been no inverse design approach for nonlinear optics that considers implementation constraints for practical applications followed…”
BackgroundPurcell enhancement of the parametric down-conversion in two-dimensional nonlinear materials
Tokman, M., Long, Z., AlMutairi, S., Wang, Y., Vdovin, V., Belkin, M., & Belyanin, A. (2019) · APL Photonics · doi:10.1063/1.5044539 · Cited by 16
Self-citationLow intensity saturation of an ISB transition by a mid-IR quantum cascade laser
Jeannin, M., Cosentino, E., Pirotta, S., Malerba, M., Biasiol, G., Manceau, J.-M., & Colombelli, R. (2023) · Applied Physics Letters · doi:10.1063/5.0153891 · Cited by 16
Liu, X., Chen, M. K., & Tsai, D. P. (2023) · Laser & Photonics Review · doi:10.1002/lpor.202300456 · Cited by 13
Sarma, R., Xu, J., de Ceglia, D., Carletti, L., Klem, J. F., Belkin, M. A., & Brener, I. (2022) · Optics Express · doi:10.1364/oe.468709 · Cited by 12
Self-citationInverse design of nonlinear metasurfaces for sum frequency generation
Li, N., Zhang, J., Neshev, D. N., & Sukhorukov, A. A. (2024) · Nanophotonics · doi:10.1515/nanoph-2024-0137 · Cited by 12 · cited 1×
“While there also have been theoretical investigations of these approaches for optimizing nonlinear optical devices, including metasurfaces [32, 33], to date, there has been no inverse design approach for nonlinear optics that considers implementation constraints for practical applications followed…”
BackgroundCotrufo, M., Krakofsky, J. H., Mann, S. A., Boehm, G., Belkin, M. A., & Alù, A. (2024) · npj Nanophotonics · doi:10.1038/s44310-024-00016-7 · Cited by 8
Self-citationFundamental limits on radiative χ (2) second harmonic generation
Mohajan, J., Chao, P., Jin, W., Molesky, S., & Rodríguez, A. W. (2023) · Optics Express · doi:10.1364/oe.513565 · Cited by 7 · cited 3×
“All calculations are performed under the assumptions of non-depleted pump [44].”
MethodSelf-citationUltrafast optical switching and power limiting in intersubband polaritonic metasurfaces
Mann, S. A., Nookala, N., Johnson, S., Mekkawy, A., Klem, J. F., Brener, I., Raschke, M., Alù, A., & Belkin, M. A. (2020) · Conference on Lasers and Electro-Optics · doi:10.1364/cleo_qels.2020.ftu4q.7 · Cited by 7
Self-citationSpatially entangled pairs of photons from lithium niobate nonlocal metasurfaces
Zhang, J., Ma, J., Parry, M., Cai, M., Camacho‐Morales, R., Xu, L., Neshev, D. N., & Sukhorukov, A. A. (2022) · International Congress on Artificial Materials for Novel Wave Phenomena (Metamaterials) · doi:10.1109/metamaterials54993.2022.9920945 · Cited by 5
Nonlinear Metasurfaces: A Paradigm Shift in Nonlinear OpticsPreprint
Krasnok, A., Tymchenko, M., & Alù, A. (2017) · arXiv (Cornell University) · doi:10.48550/arxiv.1706.07563
Vabishchevich, P. P., Liu, S., Sinclair, M. B., Keeler, G. A., Peake, G. M., & Brener, I. (2018) · Conference on Lasers and Electro-Optics · doi:10.1364/cleo_qels.2018.fw3g.1
Self-citationSarma, R., de Ceglia, D., Nookala, N., Vincenti, M. A., Campione, S., Wolf, O., Scalora, M., Belkin, M., & Brener, I. (2019) · Conference on Lasers and Electro-Optics · doi:10.1364/cleo_qels.2019.fw4b.1
Self-citationFedotova, A., Younesi, M., Sautter, J., Vaskin, A., Löchner, F. J. F., Steinert, M., Geiss, R., Pertsch, T., Staude, I., & Setzpfandt, F. (2020) · Nano Letters · doi:10.1021/acs.nanolett.0c04651
Highly-efficient longitudinal second-harmonic generation from doubly-resonant AlGaAs nanoantennas
Xu, L., Rahmani, M., Smirnova, D., Kamali, K. Z., Zhang, G., Neshev, D., & Miroshnichenko, A. (2018) · doi:10.20944/preprints201808.0414.v1
Shaping the second harmonic radiation pattern from AlGaAs dielectric nanoantennas
Carletti, L., Locatelli, A., Neshev, D., & Angelis, C. D. (2016) · Photonics and Fiber Technology 2016 (ACOFT, BGPP, NP) · doi:10.1364/np.2016.nt3a.5
Self-citationGiant nonlinear response from plasmonic metasurfaces coupled to intersubband transitions
Lee, J., Argyropoulos, C., Chen, P.-Y., Tymchenko, M., Lu, F., Demmerle, F., Boehm, G., Amann, M.-C., Alu, A., & Belkin, M. A. (2014) · CLEO: 2014 · doi:10.1364/cleo_qels.2014.fth4k.1
Self-citation
Research works printed but not linked: 1
- Brener I., 2019, Dielectric Metamaterials: Fundamentals, Designs and Applications
Cited by
Inverse design for scalable photonic systems
Schul, L., Mason, S., Eun, S., Ahn, G. H., & Vučković, J. (2026) · Nature Reviews Materials · doi:10.1038/s41578-026-00915-5 · Cited by 28
“110).”
Abdelraouf, O. A. M. (2025) · Optics Communications · doi:10.1016/j.optcom.2025.132526 · Cited by 12
Gradient-based optimization of scatterer arrangements based on the T-matrix method
Asadova, N. H., Fischbach, J. D., Vallée, R. A. L., Kuster, O., Augenstein, Y., Vovchuk, D., Kharchevskii, A. A., Ginzburg, P., & Rockstuhl, C. (2026) · APL Photonics · doi:10.1063/5.0316808 · Cited by 3
Aoueille, A. T., Hurley, N., Bustamante, E., Martinez, N. P., Reinke, C. M., El-Kady, I. F., & Lin, Y. (2025) · Optics Letters · doi:10.1364/ol.583903 · Cited by 1
Artificial intelligence empowered metasurface design
Wang, Y., Tang, X., Liu, C., & Ma, W. (2026) · Intelligent Opto-Electronics · doi:10.67704/ioe.2026.260007 · Cited by 1
Metadata
- Authors
- Stich, S., Mohajan, J., de Ceglia, D., Carletti, L., Jung, H., Karl, N., Brener, I., Rodriguez, A. W., Belkin, M. A., & Sarma, R.
- Affiliations
- Technical University of Munich (DE)
- Princeton University (US)
- National Institute of Optics─National Research Council (INO−CNR) and Department of Information Engineering
- National Academies of Sciences, Engineering, and Medicine (US)
- Sandia National Laboratories California (US)
- Department of Electrical and Computer Engineering
- Corresponding author
- Belkin, Mikhail A.
- Sarma, Raktim
- ORCID
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2025-04-09
- Volume
- 19
- Issue
- 18
- Pages
- 17374-17384
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W4409315190
- Cited by
- 13
- References
- 55
- Citations by year
- 2026: 8 · 2025: 5
- FWCI
- 2.08
- Type
- journal article
- Language
- en
- Open access
- green
- arxiv.org
- Licence
- Locations
- ACS Nano (publishedVersion)
- PubMed (publishedVersion)
- arXiv (Cornell University) (submittedVersion)
- Institutional Research Information System (Università degli Studi di Brescia) (submittedVersion)
- arXiv (Cornell University)
- Funders
- Division of Materials Sciences and Engineering
- Topics
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Metamaterials and Metasurfaces Applications
- Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Plasmonic and Surface Plasmon Research
- Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Photonic Crystals and Applications
- Keywords
- nonlinear metasurfaces, inverse design, topology optimization, dielectric metasurfaces, second harmonic generation, semiconductor heterostructures, directional emission, photonic resonances, nonlinear optical susceptibility, Purcell effect
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-29, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-29 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.