The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Graphene-and-Copper Artificial Nacre Fabricated by a Preform Impregnation Process: Bioinspired Strategy for Strengthening-Toughening of Metal Matrix Composite
Abstract
Metals can be strengthened by adding hard reinforcements, but such strategy usually compromises ductility and toughness. Natural nacre consists of hard and soft phases organized in a regular "brick-and-mortar" structure and exhibits a superior combination of mechanical strength and toughness, which is an attractive model for strengthening and toughening artificial composites, but such bioinspired metal matrix composite has yet to be made. Here we prepared nacre-like reduced graphene oxide (RGrO) reinforced Cu matrix composite based on a preform impregnation process, by which two-dimensional RGrO was used as "brick" and inserted into "□-and-mortar" ordered porous Cu preform (the symbol "□" means the absence of "brick"), followed by compacting. This process realized uniform dispersion and alignment of RGrO in Cu matrix simultaneously. The RGrO-and-Cu artificial nacres exhibited simultaneous enhancement on yield strength and ductility as well as increased modulus, attributed to RGrO strengthening, effective crack deflection and a possible combined failure mode of RGrO. The artificial nacres also showed significantly higher strengthening efficiency than other conventional Cu matrix composites, which might be related to the alignment of RGrO.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene
Lee, C., Wei, X., Kysar, J. W., & Hone, J. (2008) · Science · doi:10.1126/science.1157996 · Cited by 20,847
Novoselov, K. S., Fal′ko, V. I., Colombo, L., Gellert, P. R., Schwab, M. G., & Kim, K. (2012) · Nature · doi:10.1038/nature11458 · Cited by 9,251
Bioinspired structural materials
Wegst, U. G. K., Bai, H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2015) · Nature Materials · doi:10.1038/nmat4089 · Cited by 4,721
The conflicts between strength and toughness
Ritchie, R. O. (2011) · Nature Materials · doi:10.1038/nmat3115 · Cited by 3,989
The Halpin‐Tsai equations: A review
Affdl, J. C. H., & Kardos, J. L. (1976) · Polymer Engineering & Science · doi:10.1002/pen.760160512 · Cited by 3,071
Enhanced Mechanical Properties of Nanocomposites at Low Graphene Content
Reif, J., Rafiee, J., Wang, Z., Song, H., Yu, Z.-Z., & Koratkar, N. (2009) · ACS Nano · doi:10.1021/nn9010472 · Cited by 2,890
Metal matrix composites – From science to technological significance
Miracle, D. B. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.05.027 · Cited by 1,921
Freezing as a Path to Build Complex Composites
Deville, S., Saiz, E., Nalla, R. K., & Tomsia, A. P. (2006) · Science · doi:10.1126/science.1120937 · Cited by 1,900
Tough, Bio-Inspired Hybrid Materials
Munch, E., Launey, M. E., Alsem, D. H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2008) · Science · doi:10.1126/science.1164865 · Cited by 1,822
Ultrastrong and Stiff Layered Polymer Nanocomposites
Podsiadlo, P., Kaushik, A. K., Arruda, E. M., Waas, A. M., Shim, B. S., Xu, J., Nandivada, H., Pumplin, B. G., Lahann, J., Ramamoorthy, A., et al. (2007) · Science · doi:10.1126/science.1143176 · Cited by 1,630
Nanostructured artificial nacre
Tang, Z., Kotov, N. A., Magonov, S., & Ozturk, B. (2003) · Nature Materials · doi:10.1038/nmat906 · Cited by 1,454
Structural Biological Materials: Critical Mechanics-Materials Connections
Meyers, M. A., McKittrick, J., & Chen, P.-Y. (2013) · Science · doi:10.1126/science.1220854 · Cited by 1,171
Bioinspired Design and Assembly of Platelet Reinforced Polymer Films
Bonderer, L. J., Studart, A. R., & Gauckler, L. J. (2008) · Science · doi:10.1126/science.1148726 · Cited by 1,031
Strong, tough and stiff bioinspired ceramics from brittle constituents
Bouville, F., Maire, E., Meille, S., Van de Moortèle, B., Stevenson, A. J., & Deville, S. (2014) · Nature Materials · doi:10.1038/nmat3915 · Cited by 959
Elastic Properties of Chemically Derived Single Graphene Sheets
Gómez-Navarro, C., Burghard, M., & Kern, K. (2008) · Nano Letters · doi:10.1021/nl801384y · Cited by 954
Reinforcement with graphene nanosheets in aluminum matrix composites
Wang, J., Li, Z., Fan, G., Pan, H., Chen, Z., & Zhang, D. (2012) · Scripta Materialia · doi:10.1016/j.scriptamat.2012.01.012 · Cited by 882
Self-citationHwang, J., Yoon, T., Jin, S. H., Lee, J., Kim, T., Hong, S. H., & Jeon, S. (2013) · Advanced Materials · doi:10.1002/adma.201302495 · Cited by 766
Strengthening effect of single-atomic-layer graphene in metal–graphene nanolayered composites
Kim, Y., Lee, J., Yeom, M. S., Shin, J. W., Kim, H., Cui, Y., Kysar, J. W., Hone, J., Jung, Y., Jeon, S., et al. (2013) · Nature Communications · doi:10.1038/ncomms3114 · Cited by 682
Toughening in Graphene Ceramic Composites
Walker, L. S., Marotto, V. R., Reif, J., Koratkar, N., & Corral, E. L. (2011) · ACS Nano · doi:10.1021/nn200319d · Cited by 652
Novel Nanoparticle‐Reinforced Metal Matrix Composites with Enhanced Mechanical Properties
Tjong, S. C. (2007) · Advanced Engineering Materials · doi:10.1002/adem.200700106 · Cited by 619
Graphene–aluminum nanocomposites
Bartolucci, S. F., Paras, J., Reif, J., Rafiee, J., Lee, S., Kapoor, D., & Koratkar, N. (2011) · Materials Science and Engineering: A · doi:10.1016/j.msea.2011.07.043 · Cited by 618
Wet Chemical Synthesis of Graphene
Eigler, S., Enzelberger‐Heim, M., Grimm, S., Hofmann, P., Kroener, W., Geworski, A., Dotzer, C., Röckert, M., Xiao, J., Papp, C., et al. (2013) · Advanced Materials · doi:10.1002/adma.201300155 · Cited by 537
Strengthening behavior of few-layered graphene/aluminum composites
Shin, S. E., Choi, H. J., Shin, J. H., & Bae, D. H. (2015) · Carbon · doi:10.1016/j.carbon.2014.10.044 · Cited by 477
Mortensen, A., & Llorca, J. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104511 · Cited by 477
Cui, W., Li, M., Liu, J., Wang, B., Zhang, C., Jiang, L., & Cheng, Q. (2014) · ACS Nano · doi:10.1021/nn503755c · Cited by 401
Yoon, T., Shin, W. C., Kim, T. Y., Mun, J. H., Kim, T.-S., & Cho, B. J. (2012) · Nano Letters · doi:10.1021/nl204123h · Cited by 399
Novel nanoprocessing route for bulk graphene nanoplatelets reinforced metal matrix nanocomposites
Chen, L.-Y., Konishi, H., Fehrenbacher, A., Ma, C., Xu, J.-Q., Choi, H., Xu, H.-F., Pfefferkorn, F. E., & Li, X.-C. (2012) · Scripta Materialia · doi:10.1016/j.scriptamat.2012.03.013 · Cited by 336
Ultratough Artificial Nacre Based on Conjugated Cross‐linked Graphene Oxide
Cheng, Q., Wu, M., Li, M., Jiang, L., & Tang, Z. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201210166 · Cited by 334
Investigating aluminum alloy reinforced by graphene nanoflakes
Yan, S. J., Dai, S. L., Zhang, X. Y., Yang, C., Hong, Q. H., Chen, J. Z., & Lin, Z. M. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.06.077 · Cited by 329
Enhanced strength in bulk graphene–copper composites
Chu, K., & Jia, C. (2014) · physica status solidi (a) · doi:10.1002/pssa.201330051 · Cited by 329
Yao, H., Tan, Z., Fang, H., & Yu, S. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201004748 · Cited by 326
Self-citationUltra‐Robust Graphene Oxide‐Silk Fibroin Nanocomposite Membranes
Hu, K., Gupta, M. K., Kulkarni, D. D., & Tsukruk, V. V. (2013) · Advanced Materials · doi:10.1002/adma.201300179 · Cited by 307
Yao, H., Ge, J., Mao, L., Yan, Y., & Yu, S. (2014) · Advanced Materials · doi:10.1002/adma.201303470 · Cited by 292
Microstructures and tensile behavior of carbon nanotube reinforced Cu matrix nanocomposites
Kim, K. T., Cha, S. I., Hong, S. H., & Hong, S. H. (2006) · Materials Science and Engineering: A · doi:10.1016/j.msea.2006.04.085 · Cited by 291
Enhancement of the mechanical properties of graphene–copper composites with graphene–nickel hybrids
Tang, Y., Yang, X., Wang, R., & Li, M. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.01.061 · Cited by 283
Pavithra, C. L. P., Sarada, B. V., Rajulapati, K. V., Rao, T. N., & Sundararajan, G. (2014) · Scientific Reports · doi:10.1038/srep04049 · Cited by 277
Kuang, D., Xu, L., Liu, L., Hu, W., & Wu, Y. (2013) · Applied Surface Science · doi:10.1016/j.apsusc.2013.02.066 · Cited by 266
Preparation and tribological properties of TiAl matrix composites reinforced by multilayer graphene
Xu, Z., Shi, X., Zhai, W., Yao, J., Song, S., & Zhang, Q. (2014) · Carbon · doi:10.1016/j.carbon.2013.09.077 · Cited by 210
Lin, D., Richard Liu, C., & Cheng, G. J. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.07.038 · Cited by 188
A review of experimental techniques to produce a nacre-like structure
Corni, I., Harvey, T. J., Wharton, J. A., Stokes, K. R., Walsh, F. C., & Wood, R. J. K. (2012) · Bioinspiration & Biomimetics · doi:10.1088/1748-3182/7/3/031001 · Cited by 174
Li, M., Che, H., Liu, X., Liang, S., & Xie, H. (2014) · Journal of Materials Science · doi:10.1007/s10853-014-8082-x · Cited by 143
Jiang, L., Li, Z., Fan, G., & Zhang, D. (2011) · Scripta Materialia · doi:10.1016/j.scriptamat.2011.05.022 · Cited by 130
Self-citation
Cited by
Copper/graphene composites: a review
Hidalgo-Manrique, P., Lei, X., Xu, R., Zhou, M., Kinloch, I. A., & Young, R. J. (2019) · Journal of Materials Science · doi:10.1007/s10853-019-03703-5 · Cited by 393
A short review on mechanical properties of graphene reinforced metal matrix composites
Güler, Ö., & Bağcı, N. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.01.077 · Cited by 342
Cao, M., Xiong, D.-B., Tan, Z., Ji, G., Amin-Ahmadi, B., Guo, Q., Fan, G., Guo, C., Li, Z., & Zhang, D. (2017) · Carbon · doi:10.1016/j.carbon.2017.02.089 · Cited by 338
Self-citationUltrahigh Electrical Conductivity of Graphene Embedded in Metals
Cao, M., Xiong, D., Yang, L., Li, S., Xie, Y., Guo, Q., Li, Z., Adams, H., Gu, J., Fan, T., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806792 · Cited by 314
Self-citationChu, K., Wang, X.-H., Wang, F., Li, Y.-B., Huang, D.-J., Liu, H., Ma, W.-L., Liu, F.-X., & Zhang, H. (2018) · Carbon · doi:10.1016/j.carbon.2017.10.099 · Cited by 302
Metadata
- Authors
- Xiong, D.-B., Cao, M., Guo, Q., Tan, Z., Fan, G., Li, Z., & Zhang, D.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-06-18
- Volume
- 9
- Issue
- 7
- Pages
- 6934-6943
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2415497798
- Cited by
- 302
- References
- 42
- FWCI
- 19.29
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.