The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Toward More Reliable Lithium–Sulfur Batteries: An All-Graphene Cathode Structure
Abstract
Lithium-sulfur (Li-S) batteries are attracting increasing interest due to their high theoretical specific energy density, low cost, and eco-friendliness. However, most reports of the high gravimetric specific capacity and long cyclic life are not practically reliable because of their low areal specific capacity derived from the low areal sulfur loading and low sulfur content. Here, we fabricated a highly porous graphene with high pore volume of 3.51 cm(3) g(-1) as the sulfur host, enabling a high sulfur content of 80 wt %, and based on this, we further proposed an all-graphene structure for the sulfur cathode with highly conductive graphene as the current collector and partially oxygenated graphene as a polysulfide-adsorption layer. This cathode structural design enables a 5 mg cm(-2) sulfur-loaded cathode showing both high initial gravimetric specific capacity (1500 mAh g(-1)) and areal specific capacity (7.5 mAh cm(-2)), together with excellent cycling stability for 400 cycles, indicating great promise for more reliable lithium-sulfur batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide
Stankovich, S., Dikin, D. A., Piner, R. D., Kohlhaas, K. A., Kleinhammes, A., Jia, Y., Wu, Y., Nguyen, S. T., & Ruoff, R. S. (2007) · Carbon · doi:10.1016/j.carbon.2007.02.034 · Cited by 13,878
Improved Synthesis of Graphene Oxide
Marcano, D. C., Kosynkin, D. V., Berlin, J. M., Sinitskii, A., Sun, Z., Slesarev, A., Alemany, L. B., Lu, W., & Tour, J. M. (2010) · ACS Nano · doi:10.1021/nn1006368 · Cited by 11,989
Tuinstra, F., & Koenig, J. L. (1970) · The Journal of Chemical Physics · doi:10.1063/1.1674108 · Cited by 10,717
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Challenges and Prospects of Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., & Su, Y.-S. (2013) · Accounts of Chemical Research · doi:10.1021/ar300179v · Cited by 2,380
Wang, H., Yang, Y., Liang, Y., Robinson, J. T., Li, Y., Jackson, A., Cui, Y., & Dai, H. (2011) · Nano Letters · doi:10.1021/nl200658a · Cited by 2,119
Structural evolution during the reduction of chemically derived graphene oxide
Bagri, A., Mattevi, C., Acik, M., Chabal, Y. J., Chhowalla, M., & Shenoy, V. B. (2010) · Nature Chemistry · doi:10.1038/nchem.686 · Cited by 1,819
Liquid electrolyte lithium/sulfur battery: Fundamental chemistry, problems, and solutions
Zhang, S. S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.12.102 · Cited by 1,592
Graphene Oxide as a Sulfur Immobilizer in High Performance Lithium/Sulfur Cells
Ji, L., Rao, M., Zheng, H., Zhang, L., Li, Y., Duan, W., Guo, J., Cairns, E. J., & Zhang, Y. (2011) · Journal of the American Chemical Society · doi:10.1021/ja206955k · Cited by 1,505
Cited by
More Reliable Lithium‐Sulfur Batteries: Status, Solutions and Prospects
Fang, R., Zhao, S., Sun, Z., Wang, D., Cheng, H., & Li, F. (2017) · Advanced Materials · doi:10.1002/adma.201606823 · Cited by 1,785
Self-citationReview on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
A review on energy chemistry of fast-charging anodes
Cai, W., Yao, Y.-X., Zhu, G.-L., Yan, C., Jiang, L.-L., He, C., Huang, J.-Q., & Zhang, Q. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00728h · Cited by 662
Porous Carbons: Structure‐Oriented Design and Versatile Applications
Tian, W., Zhang, H., Duan, X., Sun, H., Shao, G., & Wang, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909265 · Cited by 657
Current Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
The Regulating Role of Carbon Nanotubes and Graphene in Lithium‐Ion and Lithium–Sulfur Batteries
Fang, R., Chen, K., Yin, L., Sun, Z., Li, F., & Cheng, H. (2019) · Advanced Materials · doi:10.1002/adma.201800863 · Cited by 617
Self-citation3D Graphene Materials: From Understanding to Design and Synthesis Control
Sun, Z., Fang, S., & Hu, Y. H. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00083 · Cited by 543
Graphene-based composites for electrochemical energy storage
Wang, B., Ruan, T., Chen, Y., Jin, F., Peng, L., Zhou, Y., Wang, D., & Dou, S. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.08.004 · Cited by 530
NiO/CoN Porous Nanowires as Efficient Bifunctional Catalysts for Zn–Air Batteries
Yin, J., Li, Y., Lv, F., Fan, Q., Zhao, Y.-Q., Zhang, Q., Wang, W., Cheng, F., Xi, P., & Guo, S. (2017) · ACS Nano · doi:10.1021/acsnano.7b00417 · Cited by 524
Zhang, Z., Kong, L., Liu, S., Li, G., & Gao, X. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602543 · Cited by 472
Carbon nanomaterials for advanced lithium sulfur batteries
Xu, Z.-L., Kim, J.-K., & Kang, K. (2018) · Nano Today · doi:10.1016/j.nantod.2018.02.006 · Cited by 454
Dong, Y., Zheng, S., Qin, J., Zhao, X., Shi, H., Wang, X., Chen, J., & Wu, Z.-S. (2018) · ACS Nano · doi:10.1021/acsnano.7b07672 · Cited by 446
Structural Design of Lithium–Sulfur Batteries: From Fundamental Research to Practical Application
Yang, X., Li, X., Adair, K., Zhang, H., & Sun, X. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0010-3 · Cited by 411
A review of recent developments in rechargeable lithium–sulfur batteries
Kang, W., Deng, N., Ju, J., Li, Q., Wu, D., Ma, X., Li, L., Naebe, M., & Cheng, B. (2016) · Nanoscale · doi:10.1039/c6nr04923k · Cited by 391
Porous Carbon Composites for Next Generation Rechargeable Lithium Batteries
Liu, H., Liu, X., Li, W., Guo, X., Wang, Y., Wang, G., & Zhao, D. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700283 · Cited by 356
Path towards graphene commercialization from lab to market
Kong, W., Kum, H., Bae, S.-H., Shim, J., Kim, H., Kong, L., Meng, Y., Wang, K., Kim, C., & Kim, J. (2019) · Nature Nanotechnology · doi:10.1038/s41565-019-0555-2 · Cited by 350
Exploiting a robust biopolymer network binder for an ultrahigh-areal-capacity Li–S battery
Liu, J., Galpaya, D. G. D., Yan, L., Sun, M., Lin, Z., Yan, C., Liang, C., & Zhang, S. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03033e · Cited by 347
Status and Prospects of MXene‐Based Lithium–Sulfur Batteries
Zhao, Q., Zhu, Q., Liu, Y., & Xu, B. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202100457 · Cited by 334
Advanced energy materials for flexible batteries in energy storage: A review
Kong, L., Tang, C., Peng, H., Huang, J., & Zhang, Q. (2020) · SmartMat · doi:10.1002/smm2.1007 · Cited by 316
Graphene-Based Nanomaterials for Catalysis
Hu, M., Yao, Z., & Wang, X. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b05048 · Cited by 295
Cathode materials for lithium–sulfur batteries: a practical perspective
Eftekhari, A., & Kim, D.-W. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00799j · Cited by 285
Metadata
- Authors
- Fang, R., Zhao, S., Pei, S., Qian, X., Hou, P.-X., Cheng, H.-M., Liu, C., & Li, F.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-08-19
- Volume
- 10
- Issue
- 9
- Pages
- 8676-8682
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2513287540
- Cited by
- 280
- References
- 36
- FWCI
- 21.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.