The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Ti3C2 MXene-Derived Sodium/Potassium Titanate Nanoribbons for High-Performance Sodium/Potassium Ion Batteries with Enhanced Capacities
Abstract
Sodium and potassium ion batteries hold promise for next-generation energy storage systems due to their rich abundance and low cost, but are facing great challenges in optimum electrode materials for actual applications. Here, ultrathin nanoribbons of sodium titanate (M-NTO, NaTi 1.5 O 8.3 ) and potassium titanate (M-KTO, K 2 Ti 4 O 9 ) were successfully synthesized by a simultaneous oxidation and alkalization process of Ti 3 C 2 MXene. Benefiting from the suitable interlayer spacing (0.90 nm for M-NTO, 0.93 nm for M-KTO), ultrathin thickness (<11 nm), narrow widths of nanoribbons (<60 nm), and open macroporous structures for enhanced ion insertion/extraction kinetics, the resulting M-NTO exhibited a large reversible capacity of 191 mAh g –1 at 200 mA g –1 for sodium storage, higher than those of pristine Ti 3 C 2 (178 mAh g –1 ) and commercial TiC derivatives (86 mAh g –1 ). Notably, M-KTO displayed a superior reversible capacity of 151 mAh g –1 at 50 mA g –1 and 88 mAh g –1 at a high rate of 300 mA g –1 and long-term stable cyclability over 900 times, which outperforms other Ti-based layered materials reported to date. Moreover, this strategy is facile and highly flexible and can be extended for preparing a large number of MXene-derived materials, from the 60+ group of MAX phases, for various applications such as supercapacitors, batteries, and electrocatalysts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Hu, M., Li, Z., Hu, T., Zhu, S., Zhang, C., & Wang, X. (2016) · ACS Nano · doi:10.1021/acsnano.6b06597 · Cited by 555
Self-citationRetractedTwo‐Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
Naguib, M., Kurtoglu, M., Presser, V., Lu, J., Niu, J., Heon, M., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2011) · Advanced Materials · doi:10.1002/adma.201102306 · Cited by 11,855
The Li-Ion Rechargeable Battery: A Perspective
Goodenough, J. B., & Park, K.-S. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3091438 · Cited by 9,962
Research Development on Sodium-Ion Batteries
Yabuuchi, N., Kubota, K., Dahbi, M., & Komaba, S. (2014) · Chemical Reviews · doi:10.1021/cr500192f · Cited by 6,478
25th Anniversary Article: MXenes: A New Family of Two‐Dimensional Materials
Naguib, M., Mochalin, V. N., Barsoum, M. W., & Gogotsi, Y. (2014) · Advanced Materials · doi:10.1002/adma.201304138 · Cited by 6,414
Conductive two-dimensional titanium carbide ‘clay’ with high volumetric capacitance
Ghidiu, M., Lukatskaya, M. R., Zhao, M.-Q., Gogotsi, Y., & Barsoum, M. W. (2014) · Nature · doi:10.1038/nature13970 · Cited by 5,997
Electromagnetic interference shielding with 2D transition metal carbides (MXenes)
Shahzad, F., Alhabeb, M., Hatter, C. B., Anasori, B., Man Hong, S., Koo, C. M., & Gogotsi, Y. (2016) · Science · doi:10.1126/science.aag2421 · Cited by 5,201
Two-Dimensional Transition Metal Carbides
Naguib, M., Mashtalir, O., Carle, J., Presser, V., Lu, J., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2012) · ACS Nano · doi:10.1021/nn204153h · Cited by 4,769
Slater, M. D., Kim, D., Lee, E., & Johnson, C. S. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200691 · Cited by 4,518
Cation Intercalation and High Volumetric Capacitance of Two-Dimensional Titanium Carbide
Lukatskaya, M. R., Mashtalir, O., Ren, C. E., Dall’Agnese, Y., Rozier, P., Taberna, P. L., Naguib, M., Simon, P., Barsoum, M. W., & Gogotsi, Y. (2013) · Science · doi:10.1126/science.1241488 · Cited by 4,320
Flexible and conductive MXene films and nanocomposites with high capacitance
Ling, Z., Ren, C. E., Zhao, M.-Q., Yang, J., Giammarco, J. M., Qiu, J., Barsoum, M. W., & Gogotsi, Y. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1414215111 · Cited by 2,274
Tang, Q., Zhou, Z., & Shen, P. (2012) · Journal of the American Chemical Society · doi:10.1021/ja308463r · Cited by 2,254
The Emerging Chemistry of Sodium Ion Batteries for Electrochemical Energy Storage
Kundu, D., Talaie, E., Duffort, V., & Nazar, L. F. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410376 · Cited by 2,068
X-ray photoelectron spectroscopy of select multi-layered transition metal carbides (MXenes)
Halim, J., Cook, K. M., Naguib, M., Eklund, P., Gogotsi, Y., Rosen, J., & Barsoum, M. W. (2016) · Applied Surface Science · doi:10.1016/j.apsusc.2015.11.089 · Cited by 2,047
Carbon Electrodes for K-Ion Batteries
Jian, Z., Luo, W., & Ji, X. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06809 · Cited by 1,866
Titania Nanotubes Prepared by Chemical Processing
Kasuga, T., Hiramatsu, M., Hoson, A., Sekino, T., & Niihara, K. (1999) · Advanced Materials · doi:10.1002/(sici)1521-4095(199910)11:15<1307::aid-adma1307>3.0.co;2-h · Cited by 1,576
Ti3C2 MXene as a High Capacity Electrode Material for Metal (Li, Na, K, Ca) Ion Batteries
Er, D., Li, J., Naguib, M., Gogotsi, Y., & Shenoy, V. B. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am501144q · Cited by 1,528
Nanoionics: ion transport and electrochemical storage in confined systems
Maier, J. (2005) · Nature Materials · doi:10.1038/nmat1513 · Cited by 1,460
Nanoionics: ion transport and electrochemical storage in confined systems
MAIER, J. (2010) · Materials for Sustainable Energy · doi:10.1142/9789814317665_0023 · Cited by 1,202
Prediction and Characterization of MXene Nanosheet Anodes for Non-Lithium-Ion Batteries
Xie, Y., Dall’Agnese, Y., Naguib, M., Gogotsi, Y., Barsoum, M. W., Zhuang, H. L., & Kent, P. R. C. (2014) · ACS Nano · doi:10.1021/nn503921j · Cited by 1,046
Recent advances in MXene: Preparation, properties, and applications
Lei, J.-C., Zhang, X., & Zhou, Z. (2015) · Frontiers of Physics · doi:10.1007/s11467-015-0493-x · Cited by 999
Hard Carbon Microspheres: Potassium‐Ion Anode Versus Sodium‐Ion Anode
Jian, Z., Xing, Z., Bommier, C., Li, Z., & Ji, X. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501874 · Cited by 985
NMR reveals the surface functionalisation of Ti3C2MXene
Hope, M. A., Forse, A. C., Griffith, K. J., Lukatskaya, M. R., Ghidiu, M., Gogotsi, Y., & Grey, C. P. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp00330c · Cited by 974
Potassium Ion Batteries with Graphitic Materials
Luo, W., Wan, J., Ozdemir, B., Bao, W., Chen, Y., Dai, J., Lin, H., Xu, Y., Gu, F., Barone, V., et al. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b03667 · Cited by 929
Eftekhari, A., Jian, Z., & Ji, X. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b07989 · Cited by 860
Flexible graphene-based lithium ion batteries with ultrafast charge and discharge rates
Li, N., Chen, Z., Ren, W., Li, F., & Cheng, H.-M. (2012) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1210072109 · Cited by 794
Sodium Storage Behavior in Natural Graphite using Ether‐based Electrolyte Systems
Kim, H., Hong, J., Park, Y., Kim, J., Hwang, I., & Kang, K. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201402984 · Cited by 767
Wang, J., Yang, N., Tang, H., Dong, Z., Jin, Q., Yang, M., Kisailus, D., Zhao, H., Tang, Z., & Wang, D. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201301622 · Cited by 767
Luo, J., Tao, X., Zhang, J., Xia, Y., Huang, H., Zhang, L., Gan, Y., Liang, C., & Zhang, W. (2016) · ACS Nano · doi:10.1021/acsnano.5b07333 · Cited by 765
Graphene-analogous low-dimensional materials
Tang, Q., & Zhou, Z. (2013) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.04.003 · Cited by 762
Electrochemical Intercalation of Potassium into Graphite
Zhao, J., Zou, X., Zhu, Y., Xu, Y., & Wang, C. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602248 · Cited by 647
Sodium-Ion Intercalation Mechanism in MXene Nanosheets
Kajiyama, S., Szabova, L., Sodeyama, K., Iinuma, H., Morita, R., Gotoh, K., Tateyama, Y., Okubo, M., & Yamada, A. (2016) · ACS Nano · doi:10.1021/acsnano.5b06958 · Cited by 602
H2O2assisted room temperature oxidation of Ti2C MXene for Li-ion battery anodes
Ahmed, B., Anjum, D. H., Hedhili, M. N., Gogotsi, Y., & Alshareef, H. N. (2016) · Nanoscale · doi:10.1039/c6nr00002a · Cited by 528
Pan, H., Lu, X., Yu, X., Hu, Y., Li, H., Yang, X., & Chen, L. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201300139 · Cited by 516
Li, H., Hou, Y., Wang, F., Lohe, M. R., Zhuang, X., Niu, L., & Feng, X. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601847 · Cited by 512
MXene‐on‐Paper Coplanar Microsupercapacitors
Kurra, N., Ahmed, B., Gogotsi, Y., & Alshareef, H. N. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201601372 · Cited by 480
Tang, Y., Zhang, Y., Deng, J., Wei, J., Tam, H. L., Chandran, B. K., Dong, Z., Chen, Z., & Chen, X. (2014) · Advanced Materials · doi:10.1002/adma.201402000 · Cited by 422
Zhang, C. (., Kim, S. J., Ghidiu, M., Zhao, M., Barsoum, M. W., Nicolosi, V., & Gogotsi, Y. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201600682 · Cited by 390
Liu, Y., Fan, F., Wang, J., Liu, Y., Chen, H., Jungjohann, K. L., Xu, Y., Zhu, Y., Bigio, D., Zhu, T., et al. (2014) · Nano Letters · doi:10.1021/nl500970a · Cited by 282
Li, H., Peng, L., Zhu, Y., Chen, D., Zhang, X., & Yu, G. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00794e · Cited by 270
Fu, S., Ni, J., Xu, Y., Zhang, Q., & Li, L. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b01805 · Cited by 255
Dong, Y., Yu, M., Wang, Z., Liu, Y., Wang, X., Zhao, Z., & Qiu, J. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201603659 · Cited by 221
Self-citationK2Ti4O9: A Promising Anode Material for Potassium Ion Batteries
Kishore, B., G, V., & Munichandraiah, N. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0421613jes · Cited by 178
Wang, W., Yu, C., Lin, Z., Hou, J., Zhu, H., & Jiao, S. (2013) · Nanoscale · doi:10.1039/c2nr32661b · Cited by 171
Nanostructured Ti-based anode materials for Na-ion batteries
Mei, Y., Huang, Y., & Hu, X. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta04611h · Cited by 154
Ultrafine potassium titanate nanowires: a new Ti-based anode for sodium ion batteries
Zhang, Q., Guo, Y., Guo, K., Zhai, T., & Li, H. (2016) · Chemical Communications · doi:10.1039/c6cc01057a · Cited by 55
Cited by
Research Development on K-Ion Batteries
Hosaka, T., Kubota, K., Hameed, A. S., & Komaba, S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00463 · Cited by 1,346
Recent Advances in Layered Ti3C2Tx MXene for Electrochemical Energy Storage
Xiong, D., Li, X., Bai, Z., & Lu, S. (2018) · Small · doi:10.1002/smll.201703419 · Cited by 1,006
MXene-based materials for electrochemical energy storage
Zhang, X., Zhang, Z., & Zhou, Z. (2018) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2017.08.004 · Cited by 777
Lian, P., Dong, Y., Wu, Z.-S., Zheng, S., Wang, X., Wang, S., Sun, C., Qin, J., Shi, X., & Bao, X. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.08.002 · Cited by 712
Self-citationNanoengineering of 2D MXene‐Based Materials for Energy Storage Applications
Nan, J., Guo, X., Xiao, J., Li, X., Chen, W., Wu, W., Liu, H., Wang, Y., Wu, M., & Wang, G. (2021) · Small · doi:10.1002/smll.201902085 · Cited by 685
Metadata
- Authors
- Dong, Y., Wu, Z.-S., Zheng, S., Wang, X., Qin, J., Wang, S., Shi, X., & Bao, X.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-05-05
- Volume
- 11
- Issue
- 5
- Pages
- 4792-4800
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2611621407
- Cited by
- 656
- References
- 46
- FWCI
- 31.05
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.