Superior Performance of Fully Biobased Poly(lactide) via Stereocomplexation-Induced Phase Separation: Structure versus Property
The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Abstract
Superior properties such as high strength, toughness and transparency of fully biobased poly(lactide) (PLA) were achieved simultaneously without any external modifiers. The improvement in properties is well explained by a structural/morphological study. Stereocomplex PLA (SC-PLA) was obtained by melt compounding asymmetric poly( l -lactide)/poly( d -lactide) (PLLA/PDLA) blends at 200 °C and confirmed by wide-angle X-ray diffraction (WAXD) and differential scanning calorimetry (DSC) analyses. The SC-PLA domains ( d = 950–1200 nm) lead to a physical cross-link network in the PLLA matrix. Rheology and Molau experiment reveal two different microstructures as a function of SC-PLA content, i.e., the connection of SC-PLA domains varied from chain entanglement to direct molecular bridging when the SC-PLA content increased from 10% to 23%. The SC-PLA crystals and the cross-link network reinforced the PLLA matrix, resulting in increases in melt viscosity, modulus and yield strength. Surprisingly, the elongation at break of the PLLA/PDLA blends was increased concomitantly from 11% to 200% with the SC-PLA content up to 10%. The brittle-to-ductile transition is ascribed to the cross-link network and easy deformation/cavitation of the SC-PLA domains. In addition, the asymmetric PLLA/PDLA blends exhibit an average visible light transmittance as high as 70% and the blends showed excellent heat-resistance after a short annealing at 100 °C.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Stereocomplex formation between enantiomeric poly(lactides)
Ikada, Y., Jamshidi, K., Tsuji, H., & Hyon, S. H. (1987) · Macromolecules · doi:10.1021/ma00170a034 · Cited by 1,409
Effect of nucleation and plasticization on the crystallization of poly (lactic acid)
Li, H., & Huneault, M. A. (2007) · Polymer · doi:10.1016/j.polymer.2007.09.020 · Cited by 810
Structure and mechanical properties of poly(?,?-lactic acid)/poly(ɛ-caprolactone) blends
Broz, M. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00314-4 · Cited by 388
Tsuji, H., Hyon, S. H., & Ikada, Y. (1991) · Macromolecules · doi:10.1021/ma00020a026 · Cited by 334
Preparation and Properties of Plasticized Poly(lactic acid) Films
Ljungberg, N., & Wesslén, B. (2005) · Biomacromolecules · doi:10.1021/bm050098f · Cited by 331
New polylactide/layered silicate nanocomposites. 5. Designing of materials with desired properties
Sinha Ray, S., Yamada, K., Okamoto, M., Fujimoto, Y., Ogami, A., & Ueda, K. (2003) · Polymer · doi:10.1016/j.polymer.2003.08.021 · Cited by 317
Stereocomplex formation between enantiomeric poly(lactic acid)s. 6. Binary blends from copolymers
Tsuji, H., & Ikada, Y. (1992) · Macromolecules · doi:10.1021/ma00047a024 · Cited by 228
Crystallinity and mechanical properties of optically pure polylactides and their blends
Sarasua, J. R., Arraiza, A. L., Balerdi, P., & Maiza, I. (2005) · Polymer Engineering & Science · doi:10.1002/pen.20331 · Cited by 214
Synthesis and crystallization behavior of poly( l -lactide)- block -poly(ϵ-caprolactone) copolymer
Kim, J. K., Park, D.-J., Lee, M.-S., & Ihn, K. J. (2001) · Polymer · doi:10.1016/s0032-3861(01)00217-8 · Cited by 147
Tsuji, H. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00365-4 · Cited by 145
Cited by
Huang, Y., Chang, R., Han, L., Shan, G., Bao, Y., & Pan, P. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00855 · Cited by 87
Poly(lactic acid) stereocomplexes based molecular architectures: Synthesis and crystallization
Michell, R. M., Ladelta, V., Da Silva, E., Müller, A. J., & Hadjichristidis, N. (2023) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2023.101742 · Cited by 77
Yang, D.-D., Liu, W., Zhu, H.-M., Wu, G., Chen, S.-C., Wang, X.-L., & Wang, Y.-Z. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b06343 · Cited by 60
Soft, Formstable (Co)Polyester Blend Elastomers
Neffe, A., Izraylit, V., Hommes-Schattmann, P., & Lendlein, A. (2021) · Nanomaterials · doi:10.3390/nano11061472 · Cited by 9
Metadata
- Authors
- Ma, P., Shen, T., Xu, P., Dong, W., Lemstra, P. J., & Chen, M.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-06-03
- Volume
- 3
- Issue
- 7
- Pages
- 1470-1478
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2511033844
- Cited by
- 108
- References
- 11
- FWCI
- 5.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.