ABA-Type Thermoplastic Elastomers Composed of Poly(ε-caprolactone-co-δ-valerolactone) Soft Midblock and Polymorphic Poly(lactic acid) Hard End blocks
The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
Abstract
A series of triblock copolymers consisting of the poly(ε-caprolactone- co -δ-valerolactone) (PCVL) soft midblock and poly(lactic acid) (PLA) hard end blocks were synthesized via the sequential ring-opening polymerization. PCVL random copolyester was prepared by the copolymerization of ε-caprolactone (εCL) and δ-valerolactone (δVL). PCVL has the lower crystallization temperature but comparable crystallizability with the poly(ε-caprolactone) homopolymer, indicating the isomorphic crystallization of εCL and δVL. Molecular weight and chemical composition of PLA–PCVL–PLAs were controlled by the feed ratio of lactide monomer to PCVL macroinitiator. PLA–PCVL–PLAs exhibit the typical characteristics of thermoplastic elastomer (TPE). Crystallization behavior, thermal, and mechanical properties of PLA–PCVL–PLAs are readily modulated by changing the length, tacticity, and stereostructure of PLA end blocks. PLA end blocks retard the crystallization of PCVL midblock in PLA–PCVL–PLAs. Stereocomplex crystallites of PLA are conclusively formed in the racemic blends of PLA–PCVL–PLAs, leading to the increased melting temperature and thermal stability. SAXS data indicates that the microphase-separated domain size of PLA–PCVL–PLAs enhances with increasing the PLA block length and the stereocomplexation impedes forming the ordered microphase-separated structure in the racemic blends. Tensile strength, Young’s modulus, and heat-resistant temperature of PLA–PCVL–PLA TPEs increase, whereas their strains at break and transparency decrease with the crystallization or stereocomplexation of PLA end blocks.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“However, tin-catalyzed systems 29 have shown limited mechanical strength, around 8 MPa, while magnesium-based catalysts 30 have enabled record toughness of 445 MJ m -3 .”
From Metal-Free Synthesis of Tough PLLA- b -PCVL- b -PLLA Triblock Polyester Thermoplastic Elastomers from Mixed Monomers (2026) · cites this paper as [29]
In the citing paper
“Previous studies based on metal-catalyzed systems 29,30 have demonstrated that both the sequence distribution and molecular weight control of CL/VL copolymers play a decisive role in determining the final mechanical performance of the materials.”
From Metal-Free Synthesis of Tough PLLA- b -PCVL- b -PLLA Triblock Polyester Thermoplastic Elastomers from Mixed Monomers (2026) · cites this paper as [29]
In the citing paper
“Collectively, these results confirm that the metal-free one-pot synthesis yields triblock copolymers with thermal resistance comparable to those prepared by conventional metal-catalyzed methods.[28][29][30]”
From Metal-Free Synthesis of Tough PLLA- b -PCVL- b -PLLA Triblock Polyester Thermoplastic Elastomers from Mixed Monomers (2026) · cites this paper as [29]
In the citing paper
“Notably, unlike the single melting transition (T m = 23.4°C) typically observed for PCVL synthesized via Sn(Oct) 2 /1,6hexanediol, 29 the PCVL segments here exhibit dual melting peaks at 36-43 °C, consistent with those reported for Mg(II)/ BDM-catalyzed PCVL.30”
From Metal-Free Synthesis of Tough PLLA- b -PCVL- b -PLLA Triblock Polyester Thermoplastic Elastomers from Mixed Monomers (2026) · cites this paper as [29]
Citations
Cites
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Poly(lactide) Stereocomplexes: Formation, Structure, Properties, Degradation, and Applications
Tsuji, H. (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200500062 · Cited by 1,366
Polylactide (PLA)-based nanocomposites
Raquez, J.-M., Habibi, Y., Murariu, M., & Dubois, P. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.014 · Cited by 1,209
Poly(lactide) Stereocomplexes: Formation, Structure, Properties, Degradation, and Applications
Tsuji, H. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200700275 · Cited by 1,021
Aliphatic Polyester Block Polymers: Renewable, Degradable, and Sustainable
Hillmyer, M. A., & Tolman, W. B. (2014) · Accounts of Chemical Research · doi:10.1021/ar500121d · Cited by 635
Polymorphism and isomorphism in biodegradable polyesters
Pan, P., & Inoue, Y. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.01.003 · Cited by 611
Self-citationTsuji, H., & Ikada, Y. (1999) · Polymer · doi:10.1016/s0032-3861(99)00004-x · Cited by 545
Crystallization assisted self-assembly of semicrystalline block copolymers
He, W.-N., & Xu, J.-T. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.05.002 · Cited by 378
Designing biodegradable multiblock PCL/PLA thermoplastic elastomers
Cohn, D., & Hotovely Salomon, A. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.07.052 · Cited by 355
Crystal structure of poly-ε-caprolactone
Bittiger, H., Marchessault, R. H., & Niegisch, W. D. (1970) · Acta Crystallographica Section B Structural Crystallography and Crystal Chemistry · doi:10.1107/s0567740870005198 · Cited by 340
Wei, X.-F., Bao, R.-Y., Cao, Z.-Q., Yang, W., Xie, B.-H., & Yang, M.-B. (2014) · Macromolecules · doi:10.1021/ma402653a · Cited by 324
Huang, M.-H., Li, S., & Vert, M. (2004) · Polymer · doi:10.1016/j.polymer.2004.10.054 · Cited by 222
Darensbourg, D. J., & Karroonnirun, O. (2010) · Macromolecules · doi:10.1021/ma101784y · Cited by 178
Zhang, Z., Grijpma, D. W., & Feijen, J. (2004) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200300184 · Cited by 151
Ceccorulli, G., Scandola, M., Kumar, A., Kalra, B., & Gross, R. A. (2005) · Biomacromolecules · doi:10.1021/bm0493279 · Cited by 142
Polylactide–Poly(6-methyl-ε-caprolactone)–Polylactide Thermoplastic Elastomers
Martello, M. T., & Hillmyer, M. A. (2011) · Macromolecules · doi:10.1021/ma201063t · Cited by 137
ε-Decalactone: A Thermoresilient and Toughening Comonomer to Poly(l-lactide)
Olsén, P., Borke, T., Odelius, K., & Albertsson, A.-C. (2013) · Biomacromolecules · doi:10.1021/bm400733e · Cited by 128
Novel FTIR method for determining the crystallinity of poly(?-caprolactone)
He, Y. Q., & Inoue, Y. (2000) · Polymer International · doi:10.1002/1097-0126(200006)49:6<623::aid-pi435>3.0.co;2-8 · Cited by 128
Ma, C., Pan, P., Shan, G., Bao, Y., Fujita, M., & Maeda, M. (2015) · Langmuir · doi:10.1021/la503869d · Cited by 125
Self-citationHirata, M., & Kimura, Y. (2008) · Polymer · doi:10.1016/j.polymer.2008.04.014 · Cited by 123
Characterization of Polylactide-b-polyisoprene-b-polylactide Thermoplastic Elastomers
Frick, E. M., Zalusky, A. S., & Hillmyer, M. A. (2003) · Biomacromolecules · doi:10.1021/bm025628b · Cited by 120
Sustainable Poly(lactide-b-butadiene) Multiblock Copolymers with Enhanced Mechanical Properties
Lee, I., Panthani, T. R., & Bates, F. S. (2013) · Macromolecules · doi:10.1021/ma401508b · Cited by 117
Wanamaker, C. L., Bluemle, M. J., Pitet, L. M., O’Leary, L. E., Tolman, W. B., & Hillmyer, M. A. (2009) · Biomacromolecules · doi:10.1021/bm900721p · Cited by 116
Sawai, D., Tsugane, Y., Tamada, M., Kanamoto, T., Sungil, M., & Hyon, S. (2007) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.21270 · Cited by 114
Ma, P., Shen, T., Xu, P., Dong, W., Lemstra, P. J., & Chen, M. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00208 · Cited by 108
Faÿ, F., Renard, E., Langlois, V., Linossier, I., & Vallée‐Rehel, K. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.07.045 · Cited by 98
Stridsberg, K., & Albertsson, A.-C. (2000) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/(sici)1099-0518(20000515)38:10<1774::aid-pola620>3.0.co;2-f · Cited by 79
Ba, C., Yang, J., Hao, Q., Liu, X., & Cao, A. (2003) · Biomacromolecules · doi:10.1021/bm034235p · Cited by 74
Chang, R., Huang, Y., Shan, G., Bao, Y., Yun, X., Dong, T., & Pan, P. (2015) · Polymer Chemistry · doi:10.1039/c5py00742a · Cited by 72
Self-citationPanthani, T. R., & Bates, F. S. (2015) · Macromolecules · doi:10.1021/acs.macromol.5b01029 · Cited by 70
Sipos, L., Zsuga, M., & Deák, G. (1995) · Macromolecular Rapid Communications · doi:10.1002/marc.1995.030161209 · Cited by 69
Synthesis and Characterization of Random Copolyesters of ε-Caprolactone and 2-Oxepane-1,5-dione
Latere Dwan'Isa, J.-P., Lecomte, P., Dubois, P., & Jérôme, R. (2003) · Macromolecules · doi:10.1021/ma025973t · Cited by 60
Cai, G., & Litt, M. H. (1996) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/(sici)1099-0518(19960930)34:13<2701::aid-pola14>3.0.co;2-g · Cited by 57
Lebarbé, T., Ibarboure, E., Gadenne, B., Alfos, C., & Cramail, H. (2013) · Polymer Chemistry · doi:10.1039/c3py00300k · Cited by 56
Synthesis of biodegradable thermoplastic elastomers from ε‐caprolactone and lactide
Nakayama, Y., Aihara, K., Yamanishi, H., Fukuoka, H., Tanaka, R., Cai, Z., & Shiono, T. (2015) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.27463 · Cited by 52
Structural Properties and Enzymatic Degradation Behavior of PLLA and Stereocomplexed PLA Nanofibers
Fundador, N. G. V., Takemura, A., & Iwata, T. (2010) · Macromolecular Materials and Engineering · doi:10.1002/mame.201000197 · Cited by 48
Storey, R. F., Herring, K. R., & Hoffman, D. C. (1991) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1991.080291209 · Cited by 46
Pan, P., Han, L., Shan, G., & Bao, Y. (2014) · Macromolecules · doi:10.1021/ma501956f · Cited by 41
Self-citationFuruhashi, Y., Sikorski, P., Atkins, E. D. T., Iwata, T., & Doi, Y. (2001) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.10024 · Cited by 41
Zhang, S., Hou, Z., & Gonsalves, K. E. (1996) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/(sici)1099-0518(19960930)34:13<2737::aid-pola18>3.0.co;2-d · Cited by 37
Ding, N., Shentu, B., Pan, P., Shan, G., Bao, Y., & Weng, Z. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie401958m · Cited by 35
Self-citationHirata, M., Masutani, K., & Kimura, Y. (2013) · Biomacromolecules · doi:10.1021/bm400228x · Cited by 34
Huang, Y., Pan, P., Shan, G., & Bao, Y. (2014) · RSC Advances · doi:10.1039/c4ra08612k · Cited by 34
Self-citationUozumi, T., Tian, G., Ahn, C., Jin, J., Tsubaki, S., Sano, T., & Soga, K. (2000) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/(sici)1099-0518(20000515)38:10<1705::aid-pola10>3.0.co;2-9 · Cited by 30
Enhanced impact properties of polylactide by poly(lactide-b-butadiene-b-lactide) triblock copolymer
Kim, N.-Y., Yun, Y. S., Lee, J., Choochottiros, C., Pyo, H.-R., Chin, I.-J., & Jin, H. (2011) · Macromolecular Research · doi:10.1007/s13233-011-0906-9 · Cited by 23
Fernández, J., Etxeberria, A., & Sarasua, J. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42534 · Cited by 16
Jiao, M., Yang, K., Zhang, W., Pan, W., Zhang, R., & Xie, S. (2011) · Journal of Macromolecular Science Part B · doi:10.1080/00222348.2011.557612 · Cited by 11
Research works printed but not linked: 1
- 10.1016/S0032-3861(99)00004-X · DOI · Paper page
Cited by
Bio-based polyesters: Recent progress and future prospects
Zhang, Q., Song, M., Xu, Y., Wang, W., Wang, Z., & Zhang, L. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101430 · Cited by 433
Stereochemical enhancement of polymer properties
Worch, J. C., Prydderch, H., Jimaja, S., Bexis, P., Becker, M. L., & Dove, A. P. (2019) · Nature Reviews Chemistry · doi:10.1038/s41570-019-0117-z · Cited by 336
Strong, Resilient, and Sustainable Aliphatic Polyester Thermoplastic Elastomers
Watts, A., Kurokawa, N., & Hillmyer, M. A. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00283 · Cited by 188
Renewable, Degradable, and Chemically Recyclable Cross-Linked Elastomers
Brutman, J. P., De Hoe, G. X., Schneiderman, D. K., Le, T. N., & Hillmyer, M. A. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b02931 · Cited by 92
Multiblock Polyesters Demonstrating High Elasticity and Shape Memory Effects
Zhu, Y., Radlauer, M. R., Schneiderman, D. K., Shaffer, M. S. P., Hillmyer, M. A., & Williams, C. K. (2018) · Macromolecules · doi:10.1021/acs.macromol.7b02690 · Cited by 88
Metadata
- Authors
- Huang, Y., Chang, R., Han, L., Shan, G., Bao, Y., & Pan, P.
- Affiliations
- State Key Laboratory of Chemical Engineering (CN)
- Corresponding author
- Pan, Pengju
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-12-08
- Volume
- 4
- Issue
- 1
- Pages
- 121-128
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2331680982
- Cited by
- 87
- References
- 45
- Citations by year
- 2026: 8 · 2025: 6 · 2024: 7 · 2023: 5 · 2022: 7 · 2021: 8 · 2020: 11 · 2019: 8 · 2018: 14 · 2017: 9 · 2016: 4
- FWCI
- 3.26
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- ACS Sustainable Chemistry & Engineering (publishedVersion)
- Funders
- Ministry of Education of the People's Republic of China (2015XZZX004-08)
- National Natural Science Foundation of China (21274128, 21422406)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
- Keywords
- thermoplastic elastomers, polylactic acid, triblock copolymers, stereocomplexation, crystallization behavior, microphase separation, tacticity, stereostructure, random copolyesters, ring-opening polymerization, crystallization retardation, mechanical properties, thermal stability
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.