ABA-Type Thermoplastic Elastomers Composed of Poly(ε-caprolactone-co-δ-valerolactone) Soft Midblock and Polymorphic Poly(lactic acid) Hard End blocks
The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
Abstract
A series of triblock copolymers consisting of the poly(ε-caprolactone- co -δ-valerolactone) (PCVL) soft midblock and poly(lactic acid) (PLA) hard end blocks were synthesized via the sequential ring-opening polymerization. PCVL random copolyester was prepared by the copolymerization of ε-caprolactone (εCL) and δ-valerolactone (δVL). PCVL has the lower crystallization temperature but comparable crystallizability with the poly(ε-caprolactone) homopolymer, indicating the isomorphic crystallization of εCL and δVL. Molecular weight and chemical composition of PLA–PCVL–PLAs were controlled by the feed ratio of lactide monomer to PCVL macroinitiator. PLA–PCVL–PLAs exhibit the typical characteristics of thermoplastic elastomer (TPE). Crystallization behavior, thermal, and mechanical properties of PLA–PCVL–PLAs are readily modulated by changing the length, tacticity, and stereostructure of PLA end blocks. PLA end blocks retard the crystallization of PCVL midblock in PLA–PCVL–PLAs. Stereocomplex crystallites of PLA are conclusively formed in the racemic blends of PLA–PCVL–PLAs, leading to the increased melting temperature and thermal stability. SAXS data indicates that the microphase-separated domain size of PLA–PCVL–PLAs enhances with increasing the PLA block length and the stereocomplexation impedes forming the ordered microphase-separated structure in the racemic blends. Tensile strength, Young’s modulus, and heat-resistant temperature of PLA–PCVL–PLA TPEs increase, whereas their strains at break and transparency decrease with the crystallization or stereocomplexation of PLA end blocks.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“However, tin-catalyzed systems 29 have shown limited mechanical strength, around 8 MPa, while magnesium-based catalysts 30 have enabled record toughness of 445 MJ m -3 .”
From Metal-Free Synthesis of Tough PLLA- b -PCVL- b -PLLA Triblock Polyester Thermoplastic Elastomers from Mixed Monomers (2026) · cites this paper as [29]
In the citing paper
“Previous studies based on metal-catalyzed systems 29,30 have demonstrated that both the sequence distribution and molecular weight control of CL/VL copolymers play a decisive role in determining the final mechanical performance of the materials.”
From Metal-Free Synthesis of Tough PLLA- b -PCVL- b -PLLA Triblock Polyester Thermoplastic Elastomers from Mixed Monomers (2026) · cites this paper as [29]
In the citing paper
“Collectively, these results confirm that the metal-free one-pot synthesis yields triblock copolymers with thermal resistance comparable to those prepared by conventional metal-catalyzed methods.[28][29][30]”
From Metal-Free Synthesis of Tough PLLA- b -PCVL- b -PLLA Triblock Polyester Thermoplastic Elastomers from Mixed Monomers (2026) · cites this paper as [29]
In the citing paper
“Notably, unlike the single melting transition (T m = 23.4°C) typically observed for PCVL synthesized via Sn(Oct) 2 /1,6hexanediol, 29 the PCVL segments here exhibit dual melting peaks at 36-43 °C, consistent with those reported for Mg(II)/ BDM-catalyzed PCVL.30”
From Metal-Free Synthesis of Tough PLLA- b -PCVL- b -PLLA Triblock Polyester Thermoplastic Elastomers from Mixed Monomers (2026) · cites this paper as [29]
Citations
Cites
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Poly(lactide) Stereocomplexes: Formation, Structure, Properties, Degradation, and Applications
Tsuji, H. (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200500062 · Cited by 1,366
Polylactide (PLA)-based nanocomposites
Raquez, J.-M., Habibi, Y., Murariu, M., & Dubois, P. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.014 · Cited by 1,209
Poly(lactide) Stereocomplexes: Formation, Structure, Properties, Degradation, and Applications
Tsuji, H. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200700275 · Cited by 1,021
Aliphatic Polyester Block Polymers: Renewable, Degradable, and Sustainable
Hillmyer, M. A., & Tolman, W. B. (2014) · Accounts of Chemical Research · doi:10.1021/ar500121d · Cited by 635
Polymorphism and isomorphism in biodegradable polyesters
Pan, P., & Inoue, Y. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.01.003 · Cited by 611
Self-citationTsuji, H., & Ikada, Y. (1999) · Polymer · doi:10.1016/s0032-3861(99)00004-x · Cited by 545
Crystallization assisted self-assembly of semicrystalline block copolymers
He, W.-N., & Xu, J.-T. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.05.002 · Cited by 378
Designing biodegradable multiblock PCL/PLA thermoplastic elastomers
Cohn, D., & Hotovely Salomon, A. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.07.052 · Cited by 355
Crystal structure of poly-ε-caprolactone
Bittiger, H., Marchessault, R. H., & Niegisch, W. D. (1970) · Acta Crystallographica Section B Structural Crystallography and Crystal Chemistry · doi:10.1107/s0567740870005198 · Cited by 340
Research works printed but not linked: 1
- 10.1016/S0032-3861(99)00004-X · DOI · Paper page
Cited by
Bio-based polyesters: Recent progress and future prospects
Zhang, Q., Song, M., Xu, Y., Wang, W., Wang, Z., & Zhang, L. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101430 · Cited by 433
Stereochemical enhancement of polymer properties
Worch, J. C., Prydderch, H., Jimaja, S., Bexis, P., Becker, M. L., & Dove, A. P. (2019) · Nature Reviews Chemistry · doi:10.1038/s41570-019-0117-z · Cited by 336
Strong, Resilient, and Sustainable Aliphatic Polyester Thermoplastic Elastomers
Watts, A., Kurokawa, N., & Hillmyer, M. A. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00283 · Cited by 188
Renewable, Degradable, and Chemically Recyclable Cross-Linked Elastomers
Brutman, J. P., De Hoe, G. X., Schneiderman, D. K., Le, T. N., & Hillmyer, M. A. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b02931 · Cited by 92
Multiblock Polyesters Demonstrating High Elasticity and Shape Memory Effects
Zhu, Y., Radlauer, M. R., Schneiderman, D. K., Shaffer, M. S. P., Hillmyer, M. A., & Williams, C. K. (2018) · Macromolecules · doi:10.1021/acs.macromol.7b02690 · Cited by 88
Liu, Z., Hu, D., Huang, L., Li, W., Tian, J., Lu, L., & Zhou, C. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.03.077 · Cited by 81
Yang, G., & Wu, G. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b05084 · Cited by 63
Zhou, C. Y., Wei, Z., Lei, X., & Li, Y. (2016) · RSC Advances · doi:10.1039/c6ra08689f · Cited by 58
Chen, C., Sun, X., Wu, P., Hou, Y., Liu, R., Jiang, X. Q., & Zhang, L. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b04192 · Cited by 58
Genovese, L., Soccio, M., Lotti, N., Gazzano, M., Siracusa, V., Salatelli, E., Balestra, F., & Munari, A. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.08.001 · Cited by 56
Wang, H., Yu, J., Fang, H., Wei, H., Wang, X., & Ding, Y. (2018) · Polymer · doi:10.1016/j.polymer.2017.12.067 · Cited by 56
Immobilized Graphene Oxide Nanosheets as Thin but Strong Nanointerfaces in Biocomposites
Xu, H., Xie, L., Wu, D., & Hakkarainen, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01703 · Cited by 55
Zheng, Y., Xu, S., Yu, C., & Pan, P. (2022) · Accounts of Materials Research · doi:10.1021/accountsmr.2c00208 · Cited by 53
Self-citationHan, L., Yu, C., Zhou, J., Shan, G., Bao, Y., Yun, X., Dong, T., & Pan, P. (2016) · Polymer · doi:10.1016/j.polymer.2016.09.073 · Cited by 53
Self-citationMulchandani, N., Masutani, K., Kumar, S., Yamane, H., Sakurai, S., Kimura, Y., & Katiyar, V. (2021) · Polymer Chemistry · doi:10.1039/d1py00429h · Cited by 49
Cederholm, L., Olsén, P., Hakkarainen, M., & Odelius, K. (2023) · Macromolecules · doi:10.1021/acs.macromol.3c00274 · Cited by 47
Zhou, C. Y., Wei, Z., Jin, C., Wang, Y., Yu, Y., Leng, X., & Li, Y. (2018) · Polymer · doi:10.1016/j.polymer.2018.01.045 · Cited by 46
Zhao, Y., Ma, Y., Xiong, Y., Qin, T., Zhu, Y., Deng, H., Qin, J., Shi, X., & Zhang, G. (2022) · Polymer · doi:10.1016/j.polymer.2022.125075 · Cited by 47
Recyclable bio‐based crosslinked polyurethanes with self‐healing ability
Gu, L., & Wu, Q. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.46272 · Cited by 41
Wu, Y., Li, L., Chen, S., Qin, J., Chen, X., Zhou, D., & Wu, H. K. (2020) · Scientific Reports · doi:10.1038/s41598-020-60458-9 · Cited by 43
de Almeida, A., Nébouy, M., & Baeza, G. P. (2019) · Macromolecules · doi:10.1021/acs.macromol.8b01689 · Cited by 40
Wang, W., Zhang, J., Jiang, F. D., Wang, X., & Wang, Z. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.8b00277 · Cited by 38
Jin, C., Wei, Z., Yu, Y., Sui, M., Leng, X., & Li, Y. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.03.018 · Cited by 39
Hejna, A., Klein, M., Saeb, M. R., & Formela, K. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.11.005 · Cited by 40
Wu, T., Wei, Z., Ren, Y., Yu, Y., Leng, X., & Li, Y. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2018.07.018 · Cited by 36
Isono, T., Nakahira, S., Hsieh, H., Katsuhara, S., Mamiya, H., Yamamoto, T., Chen, W., Borsali, R., Tajima, K., & Satoh, T. (2020) · Macromolecules · doi:10.1021/acs.macromol.0c00611 · Cited by 35
Xie, L., Sun, X., Tian, Y., Dong, F., He, M., Xiong, Y., & Zheng, Q. (2017) · RSC Advances · doi:10.1039/c6ra27643a · Cited by 36
Jing, Z., Shi, X., Zhang, G., & Gu, J. (2017) · Polymer · doi:10.1016/j.polymer.2017.06.019 · Cited by 32
Xie, L., Shan, B., Sun, X., Tian, Y., Xie, H., He, M., Xiong, Y., & Zheng, Q. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b03101 · Cited by 31
Zhou, C. Y., Wei, Z., Wang, Y., Yu, Y., Leng, X., & Li, Y. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.01.004 · Cited by 30
Stereocomplexed physical hydrogels with high strength and tunable crystallizability
Cao, H., Chang, X., Mao, H., Zhou, J., Wu, Z. L., Shan, G., Bao, Y., & Pan, P. (2017) · Soft Matter · doi:10.1039/c7sm01491k · Cited by 32
Self-citationShentu, Z., Zhang, Z., Zhao, J. H., Chen, C., Wu, Q., Wang, L., & Yan, X. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta02288a · Cited by 29
Dong, B., Xu, G., Yang, R., Guo, X., & Wang, Q. (2023) · Macromolecules · doi:10.1021/acs.macromol.3c01773 · Cited by 30
Miao, X., Han, R., Tian, J., Ma, Y., Müller, A. J., & Li, Z. (2025) · Angewandte Chemie International Edition · doi:10.1002/anie.202417627 · Cited by 27
Gorbunova, М. А., Anokhin, D. V., & Badamshina, E. R. (2020) · Polymer Science Series B · doi:10.1134/s1560090420050073 · Cited by 27
High‐Performance Recyclable Polyester Elastomers Through Transient Strain‐Stiffening
Gao, C., Poon, K. C., Concilio, M., Zinn, T., Gregory, G. L., & Williams, C. K. (2025) · Advanced Materials · doi:10.1002/adma.202416674 · Cited by 26
Sanchez, L. A. H., Woroch, C. P., Dumas, D. M., Waymouth, R. M., & Kanan, M. W. (2025) · Journal of the American Chemical Society · doi:10.1021/jacs.4c15697 · Cited by 27
Solvent‐free ring‐opening polymerization of lactones with hydrogen‐bonding bisurea catalyst
Du, F., Zheng, Y., Yuan, W., Shan, G., Bao, Y., Jie, S., & Pan, P. (2018) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.29268 · Cited by 28
Self-citationToward a greener future: Exploring sustainable thermoplastic elastomers
Jeon, J. H., Jung, J. H., & Choi, C. (2023) · Journal of Polymer Science · doi:10.1002/pol.20230293 · Cited by 26
Feng, Z., Xie, M., Lai, J., Wang, Z., & Xia, H. (2025) · Angewandte Chemie International Edition · doi:10.1002/anie.202423712 · Cited by 28
Jing, Z., Shi, X., & Zhang, G. (2017) · Polymer International · doi:10.1002/pi.5404 · Cited by 21
Zhang, B., Wei, Z., Zhao, Y., Che, R., Wang, Y., Leng, X., & Li, Y. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.12.010 · Cited by 21
Jing, Z., Li, J., Xiao, W., Xu, H., Hong, P., & Li, Y. (2019) · RSC Advances · doi:10.1039/c9ra04283k · Cited by 21
Liu, K., Cao, H., Yuan, W., Bao, Y., Shan, G., Wu, Z. L., & Pan, P. (2020) · Journal of Materials Chemistry B · doi:10.1039/d0tb01484b · Cited by 22
Self-citationDoğancı, M. D. (2021) · Journal of Polymer Research · doi:10.1007/s10965-020-02380-2 · Cited by 23
Jin, C., Leng, X., Zhang, M., Wang, Y., Wei, Z., & Li, Y. (2019) · Polymer International · doi:10.1002/pi.5958 · Cited by 17
Konwar, D. B., Sethy, S., Satapathy, B. K., & Jacob, J. (2017) · Polymer · doi:10.1016/j.polymer.2017.07.014 · Cited by 15
Wei, Z., Che, R., Shao, S., Wang, Y., Leng, X., & Li, Y. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106348 · Cited by 15
Park, M., Hong, S.-J., Kim, N., Shin, J., & Kim, Y. (2023) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.3c02166 · Cited by 13
Synthesis of thermoplastic elastomers with high biodegradability in seawater
Zahir, L., Kida, T., Tanaka, R., Nakayama, Y., Shiono, T., Kawasaki, N., Yamano, N., & Nakayama, A. (2020) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2020.109467 · Cited by 13
Jing, Z., Huang, X., Liu, X., Liao, M., & Li, Y. (2023) · Polymer International · doi:10.1002/pi.6445 · Cited by 11
Wang, Y., Leng, X., Wei, Z., Zhao, Y., Zheng, L., & Li, Y. (2020) · Journal of Materials Science · doi:10.1007/s10853-020-04679-3 · Cited by 11
“While entirely biodegradable midblocks such as poly(e-caprolactone) (PCL) [20] and its derivatives poly(6-methyl-e-caprolactone) (P6MCL) [21], poly(menthide) (PM) [22], poly(d-valerolactone) (PVL) [23, 24], poly(trimethylene carbonate) (PTMC) [25, 26], and their copolymers P(CL-GA) [27], P(TMCDXO) [28], P(CL-TMC) [29]…”
BackgroundGuo, Y., Peng, S., Wang, Q., Song, X., Li, C., Xia, L., Wu, H. K., & Guo, S. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c01328 · Cited by 13
Lin, C., Pan, P., Shan, G., & Du, M. (2022) · Langmuir · doi:10.1021/acs.langmuir.2c02613 · Cited by 10
Self-citationPan, R., Shanks, R. A., He, Y., & Su, Y. (2019) · Computational Materials Science · doi:10.1016/j.commatsci.2019.03.055 · Cited by 11
Improvement of mechanical properties of polylactide by equal channel multiple angular extrusion
Vozniak, I., Beloshenko, V. A., Савченко, Б., & Voznyak, A. V. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.49720 · Cited by 10
Zahir, L., Kida, T., Tanaka, R., Nakayama, Y., Shiono, T., Kawasaki, N., Yamano, N., & Nakayama, A. (2021) · Life · doi:10.3390/life11010043 · Cited by 11
“Huang and coworkers synthesized Poly(ε-caprolactone-co-δ-valerolactone) (PCVL) as a soft central block and reported that the mechanical property and thermal stability of PLA-b-PCVL-b-PLA TPEs were increased with the crystallization and stereocomplexation of PLA terminal blocks [12].”
BackgroundReinišová, L., & Hermanová, S. (2020) · RSC Advances · doi:10.1039/d0ra08087j · Cited by 10
Chen, Y., Zhang, J., Zhang, Y., Cao, W., Liu, X., Bao, J., Zhang, X., & Chen, W. (2023) · Journal of Polymer Science · doi:10.1002/pol.20230425 · Cited by 9
Soft, Formstable (Co)Polyester Blend Elastomers
Neffe, A., Izraylit, V., Hommes-Schattmann, P., & Lendlein, A. (2021) · Nanomaterials · doi:10.3390/nano11061472 · Cited by 9
“Such behavior was also observed for other stereo-complex-based TPEs [30,31].”
BackgroundKosloski-Oh, S. C., Manjarrez, Y., Boghossian, T. J., & Fieser, M. E. (2022) · Chemical Science · doi:10.1039/d2sc02265f · Cited by 9
Jing, Z., Huang, X., Li, G., Liao, M., Hong, P., Li, Y., & Shi, X. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111637 · Cited by 9
Nakayama, Y., Matsu-ura, T., Tanaka, R., Shiono, T., Hino, S., Kawasaki, N., Yamano, N., Nakayama, A., Tezuka, R., & Tanaka, K. (2024) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2024.110978 · Cited by 8
Petersen, S. R., Marzagão, D. K., Gregory, G. L., Huang, Y., Clifton, D. A., Williams, C. K., & Siviour, C. R. (2024) · Angewandte Chemie International Edition · doi:10.1002/anie.202411097 · Cited by 8
Self-citationSun, H., Wang, X., & Wang, Z. (2024) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2024.122777 · Cited by 9
Xie, Q. M., Han, L., Shan, G., Bao, Y., & Pan, P. (2019) · Polymer Crystallization · doi:10.1002/pcr2.10057 · Cited by 16
Self-citationNucleating agent‐containing P(LLA‐mb‐BSA) multi‐block copolymers with balanced mechanical properties
Wu, B., Zeng, X., Wu, L., & Li, B. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.44777 · Cited by 6
Triblock Azo copolymers: RAFT synthesis, properties, thin film self-assembly and applications
Zenati, A. (2021) · Polymer-Plastics Technology and Materials · doi:10.1080/25740881.2021.2015779 · Cited by 5
Feng, Z., Xie, M., Lai, J., Wang, Z., & Xia, H. (2025) · Angewandte Chemie · doi:10.1002/ange.202423712 · Cited by 4
A Facile Approach to Construct Novel Polyesters as Soft Midblock for Thermoplastic Elastomers
Xia, Y.-Y., Yang, X., Zhang, W., Fu, Y., Cai, Z., Cao, P. F., & Zhu, J. (2024) · Chemistry - A European Journal · doi:10.1002/chem.202401727 · Cited by 4
Huang, W., Wen, X., Zhou, J., & Zhang, X. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.09.241 · Cited by 4
Miao, X., Han, R., Tian, J., Ma, Y., Müller, A. J., & Li, Z. (2024) · Angewandte Chemie · doi:10.1002/ange.202417627 · Cited by 3
Pearcy, R. J., Berrow, S. R., & Platel, R. H. (2025) · Faraday Discussions · doi:10.1039/d5fd00055f · Cited by 3
Gravina, G., Tagoe, J. N. A., Girolamo, R. D., Gentile, M., Maio, L. D., & Pellecchia, C. (2026) · ACS Polymers Au · doi:10.1021/acspolymersau.5c00172 · Cited by 2
Designing and Synthesizing Materials with Appropriate Lifetimes
Scott, J. L., & Johns, M. A. (2019) · Springer eBooks · doi:10.1007/978-1-4939-9060-3_1016 · Cited by 2
Cichoń, K., Kost, B., Safandowska, M., Różański, A., & Baśko, M. (2025) · Polymer · doi:10.1016/j.polymer.2025.129501 · Cited by 1
Ye, Y.-C., Luo, Y.-H., Xie, M., Cao, Q., Cai, Z., & Zhu, J. (2026) · Polymer Chemistry · doi:10.1039/d6py00127k · Cited by 1
Petersen, S. R., Marzagão, D. K., Gregory, G. L., Huang, Y., Clifton, D. A., Williams, C. K., & Siviour, C. R. (2024) · Angewandte Chemie · doi:10.1002/ange.202411097 · Cited by 1
Self-citationLiu, J., Xu, J., & Hadjichristidis, N. (2026) · Macromolecules · doi:10.1021/acs.macromol.6c00358
Designing and Synthesizing Materials with Appropriate Lifetimes
Scott, J. L., & Johns, M. A. (2018) · Springer eBooks · doi:10.1007/978-1-4939-2493-6_1016-1
Deokar, M. D., Kulkarni, A., Garnaik, B., Lele, A. K., & Sivaram, S. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-821998-0.00010-7 · Cited by 1
Tвердофазна модифікація полілактиду із застосуванням рівноканальної багатокутової екструзії
Beloshenko, V. A., Voznyak, A. V., Vozniak, I. V., Vozniak, I. V., Dmitrenko, V. Y., & Savchenko, B. М. (2020) · Обробка матеріалів тиском · doi:10.37142/2076-2151/2020-1(50)198
Motokucho, S., Mito, Y., Sasai, M., Dao, A. T. N., & Nakatani, H. (2026) · Macromolecular Materials and Engineering · doi:10.1002/mame.202500425
Wang, X., Dong, C., Xu, Q., Zhu, L., & Wei, Y. (2026) · Chinese Journal of Polymer Science · doi:10.1007/s10118-026-3769-4
Pan, W., Liu, X., Jin, J., Wen, Y., Yang, Y., Zhang, H., Zeng, S., Xu, Y., Zeng, S., Lin, L., et al. (2026) · Green Chemistry · doi:10.1039/d6gc04052g
Kumler, M. S., & Hillmyer, M. A. (2026) · ACS Macro Letters · doi:10.1021/acsmacrolett.6c00423
Lamparelli, D. H., Gaeta, L., Gentile, M., Maio, L. D., & Pellecchia, C. (2026) · ACS Polymers Au · doi:10.1021/acspolymersau.6c00173
Metadata
- Authors
- Huang, Y., Chang, R., Han, L., Shan, G., Bao, Y., & Pan, P.
- Affiliations
- State Key Laboratory of Chemical Engineering (CN)
- Corresponding author
- Pan, Pengju
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-12-08
- Volume
- 4
- Issue
- 1
- Pages
- 121-128
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2331680982
- Cited by
- 87
- References
- 45
- Citations by year
- 2026: 8 · 2025: 6 · 2024: 7 · 2023: 5 · 2022: 7 · 2021: 8 · 2020: 11 · 2019: 8 · 2018: 14 · 2017: 9 · 2016: 4
- FWCI
- 3.26
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- ACS Sustainable Chemistry & Engineering (publishedVersion)
- Funders
- Ministry of Education of the People's Republic of China (2015XZZX004-08)
- National Natural Science Foundation of China (21274128, 21422406)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
- Keywords
- thermoplastic elastomers, polylactic acid, triblock copolymers, stereocomplexation, crystallization behavior, microphase separation, tacticity, stereostructure, random copolyesters, ring-opening polymerization, crystallization retardation, mechanical properties, thermal stability
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.