Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 623

The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.

Conformal Coating on Ultrahigh-Aspect-Ratio Nanopores of Anodic Alumina by Atomic Layer Deposition

Elam, J. W., Routkevitch, D., Mardilovich, P. P., George, S. M.·2003·Chemistry of Materials

Abstract

Anodic alumina (AA) membranes are composed of highly uniform, nanometer-scale pores arranged in a hexagonal close-packed array. Depositing conformal films inside the nanopores is extremely difficult because the nanopores have an ultrahigh aspect ratio of L / d ≈ 10 3 . Atomic layer deposition (ALD) is a thin film growth technique that can deposit highly uniform films on high-aspect-ratio substrates with monolayer thickness control. In this study, AA membranes were coated with Al 2 O 3 and ZnO ALD films and subsequently analyzed using cross-sectional scanning electron microscopy (SEM) and electron probe microanalysis (EPMA). SEM analysis of individual nanopores revealed that the AA membranes with nanopore diameters of d = 65 nm and lengths of L = 50 μm could be coated conformally by Al 2 O 3 ALD using sufficient reactant exposure times. Zn concentration profiles measured by EPMA following ZnO ALD showed the progressive infiltration of the ZnO ALD into the nanopores with increasing exposure times for aspect ratios as high as L / d ∼5000. Monte Carlo simulation of the experimental results assuming Knudsen diffusion accurately reproduced the experimental Zn concentration profiles and predicted the minimum ALD reactant exposures necessary to achieve conformal films. The Monte Carlo simulation also predicted that the diffusion-limited deposition will become reaction-limited given a sufficiently low ALD reaction probability. To test this idea, Fourier transform infrared absorption measurements were performed during the coating of the AA membranes by Al 2 O 3 and SiO 2 ALD. The surface reactions during Al 2 O 3 ALD have a relatively high reaction probability of ∼10 - 3 . In contrast, the surface reactions during SiO 2 ALD have a very low reaction probability of ∼10 - 8 . In agreement with the predictions, diffusion-limited behavior with a t 1/2 time dependence was observed during Al 2 O 3 ALD. Reaction-limited behavior with a t 1 time dependence was observed during SiO 2 ALD.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/cm0303080

Cites

15 of 15 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 15 references

Cited by

Metadata

Authors
Elam, J. W., Routkevitch, D., Mardilovich, P. P., & George, S. M.
Venue
Chemistry of Materials
Published
2003-08-14
Volume
15
Issue
18
Pages
3507-3517
ISSN
  • 0897-4756 (ISSN-L)
  • 1520-5002
OpenAlex
W1984962131
Cited by
623
References
15
FWCI
6.36
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.