Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 219

The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.

Fast Hydrothermal Liquefaction of Nannochloropsis sp. To Produce Biocrude

Open access
Faeth, Julia L., Valdez, Peter J., Savage, Phillip E.·2013·Energy & Fuels

Abstract

Abstract We investigated the fast hydrothermal liquefaction of green marine alga Nannochloropsis sp. at batch reaction times of 1, 3, and 5 min and set-point temperatures of 300–600 °C. We also performed conventional liquefaction for 60 min at the same temperatures. These experiments cover the broadest range of reaction conditions yet reported for algae liquefaction. The biocrude yield obtained for 1 min reaction times, which was only long enough to heat the reactor from room temperature to about half of the set-point temperature (in °C), increased with an increasing set-point temperature to 66 ± 11 wt % (dry and ash-free basis) at a set-point temperature of 600 °C. The biocrude obtained at this condition contains 84% of the carbon and 91 ± 14% of the heating value present in the dry algae feedstock. This biocrude yield and corresponding energy recovery are the highest reported for liquefaction of this alga. For a reaction time of 1 min, as the set-point temperature increases, light biocrude (e.g., hexane solubles) makes up less of the total biocrude. The biocrudes produced by fast liquefaction have carbon contents and higher heating values similar to biocrudes from the traditional isothermal liquefaction process, which involves treatment for tens of minutes. These results indicate that biocrudes of similar quality may be produced in higher yields and in a fraction of the time previously thought necessary. Such a decrease in the reaction time would greatly reduce the reactor volume required for continuous biocrude production, subsequently reducing the capital costs of such a process. We also show that the reaction ordinate is a useful parameter for interpreting results from algae liquefaction performed at different temperatures and reaction times.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/ef301925d

Cites

7 of 7 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 7 references

Cited by

Metadata

Authors
Faeth, J. L., Valdez, P. J., & Savage, P. E.
Venue
Energy & Fuels
Published
2013-03-12
Volume
27
Issue
3
Pages
1391-1398
ISSN
  • 0887-0624 (ISSN-L)
  • 1520-5029
OpenAlex
W1981689257
Cited by
219
References
7
FWCI
9.92
Type
journal article
Language
en
Open access
hybrid

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.