Mitigation of Fireside Corrosion of Stainless Steel in Power Plants: A Laboratory Study of the Influences of SO2 and KCl on Initial Stages of Corrosion
The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Abstract
The effect of SO 2 (g) on the initial oxidation of the stainless-steel 304L, sprayed with 0.1 mg/cm 2 KCl and exposed in 5% O 2 and 40% H 2 O at 600 °C, was investigated. In the absence of SO 2 (g), KCl accelerates the corrosion attack by the formation of K 2 CrO 4 . The reaction with KCl depletes the oxide in chromium and converts it into an iron-rich, poorly protective oxide. When SO 2 (g) was introduced to the gas flow, KCl rapidly transformed into K 2 SO 4 . In contrast to KCl, K 2 SO 4 does not form K 2 CrO 4 . Hence, it does not accelerate the corrosion rate. Although the conversion of KCl to K 2 SO 4 is fast, the corrosion rate of KCl samples exposed in the presence of SO 2 (g) is higher than samples exposed in the presence of K 2 SO 4 . It is therefore suggested that small amounts of unreacted KCl react initially with the protective oxide, forming K 2 CrO 4, which depletes the oxide in chromium. However, because of the presence of SO 2 (g), K 2 CrO 4 immediately reacts with SO 2 (g) to form K 2 SO 4 . This study shows that the initial stages of the corrosion attack are of great importance. The initial complex interactions between the flue gas, deposit, and oxide scale affect the future corrosion resistance of the steel.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Grabke, H. J., Reese, E., & Spiegel, M. (1995) · Corrosion Science · doi:10.1016/0010-938x(95)00011-8 · Cited by 537
Asteman, H., Svensson, J.-E., Norell, M., & Johansson, L.-G. (2000) · Oxidation of Metals · doi:10.1023/a:1004642310974 · Cited by 325
Self-citationAsteman, H., Svensson, J.-E., Johansson, L.-G., & Norell, M. (1999) · Oxidation of Metals · doi:10.1023/a:1018875024306 · Cited by 304
Self-citationDeposition and high temperature corrosion in a 10 MW straw fired boiler
Michelsen, H. P., Frandsen, F., Dam-Johansen, K., & Larsen, O. H. (1998) · Fuel Processing Technology · doi:10.1016/s0378-3820(97)00062-3 · Cited by 258
KCl Induced Corrosion of a 304-type Austenitic Stainless Steel at 600°C; The Role of Potassium
Pettersson, J., Asteman, H., Svensson, J. E., & Johansson, L. G. (2005) · Oxidation of Metals · doi:10.1007/s11085-005-5704-3 · Cited by 182
Self-citationAlkali Induced High Temperature Corrosion of Stainless Steel: The Influence of NaCl, KCl and CaCl2
Karlsson, S., Pettersson, J., Johansson, L. G., & Svensson, J. E. (2012) · Oxidation of Metals · doi:10.1007/s11085-012-9293-7 · Cited by 118
Self-citationPettersson, J., Folkeson, N., Johansson, L.-G., & Svensson, J.-E. (2011) · Oxidation of Metals · doi:10.1007/s11085-011-9240-z · Cited by 117
Self-citationFolkeson, N., Jonsson, T., Halvarsson, M., Johansson, L. ‐., & Svensson, J. ‐. (2011) · Materials and Corrosion · doi:10.1002/maco.201005942 · Cited by 93
Self-citationReducing superheater corrosion in wood‐fired boilers
Henderson, P., Szakálos, P., Pettersson, R., Andersson, C., & Högberg, J. (2006) · Materials and Corrosion · doi:10.1002/maco.200503899 · Cited by 87
Jonsson, T., Froitzheim, J., Pettersson, J., Svensson, J.-E., Johansson, L.-G., & Halvarsson, M. (2009) · Oxidation of Metals · doi:10.1007/s11085-009-9156-z · Cited by 76
Self-citation
Cited by
Jonsson, T., Karlsson, S., Hooshyar, H., Sattari, M., Liske, J., Svensson, J.-E., & Johansson, L.-G. (2016) · Oxidation of Metals · doi:10.1007/s11085-016-9610-7 · Cited by 103
Self-citationOkoro, S. C., Kiamehr, S., Montgomery, M., Frandsen, F. J., & Pantleon, K. (2017) · Materials and Corrosion · doi:10.1002/maco.201609173 · Cited by 27
Okoro, S. C., Montgomery, M., Frandsen, F. J., & Pantleon, K. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b01232 · Cited by 24
Deposit Shedding in Biomass-Fired Boilers: Shear Adhesion Strength Measurements
Laxminarayan, Y., Jensen, P. A., Wu, H., Frandsen, F. J., Sander, B., & Glarborg, P. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b01312 · Cited by 23
“Several corrosion studies in literature indicate that the rate of corrosion decreases considerably over time [2, 5, 12].”
BackgroundPhother-Simon, J., Hanif, I., Jonsson, T., & Liske, J. (2024) · Fuel · doi:10.1016/j.fuel.2023.130012 · Cited by 21
Self-citationBreakdown mechanism of γ-Al2O3 on Ni2Al3 coatings exposed in a biomass fired power plant
Wu, D. L., Dahl, K. V., Grumsen, F. B., Christiansen, T. L., Montgomery, M., & Hald, J. (2020) · Corrosion Science · doi:10.1016/j.corsci.2020.108583 · Cited by 16
“The high temperature corrosion mechanisms resulting from the presence of potassium and chlorine have been extensively studied and described in the literature [2-10].”
Background
Metadata
- Authors
- Karlsson, S., Jonsson, T., Hall, J., Svensson, J.-E., & Liske, J.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-04-23
- Volume
- 28
- Issue
- 5
- Pages
- 3102-3109
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2089909356
- Cited by
- 41
- References
- 12
- FWCI
- 5.88
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.