High Temperature Corrosion under Laboratory Conditions Simulating Biomass-Firing: A Comprehensive Characterization of Corrosion Products
Open accessThe DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Abstract
An austenitic stainless steel (TP 347H FG) was coated with a synthetic deposit and exposed, under laboratory conditions simulating straw-firing at 560 °C, for 1 week. Microscopic, diffraction, and spectroscopic techniques were employed for cross-sectional and plan view “top-down” microstructural characterization of the corrosion products. The corrosion products consisted of three layers: (i) the outermost layer consists of a mixed layer of K 2 SO 4 and Fe x O y on a partly molten layer of the initial deposit, (ii) the middle layer consists of spinel (FeCr 2 O 4 ) and Fe 2 O 3, and (iii) the innermost layer is a sponge-like Ni 3 S 2 -containing layer. At the corrosion front, Cl-rich protrusions were observed. Results indicate that selective corrosion of Fe and Cr by Cl, active oxidation, and sulfidation attack of Ni are possible corrosion mechanisms.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An overview of the chemical composition of biomass
Vassilev, S. V., Baxter, D., Andersen, L. K., & Vassileva, C. G. (2010) · Fuel · doi:10.1016/j.fuel.2009.10.022 · Cited by 2,519
Grabke, H. J., Reese, E., & Spiegel, M. (1995) · Corrosion Science · doi:10.1016/0010-938x(95)00011-8 · Cited by 537
Release of K, Cl, and S during pyrolysis and combustion of high-chlorine biomass
Johansen, J. M., Jakobsen, J. G., Frandsen, F. J., & Glarborg, P. (2011) · Energy & Fuels · doi:10.1021/ef201098n · Cited by 386
Self-citationDeposition and high temperature corrosion in a 10 MW straw fired boiler
Michelsen, H. P., Frandsen, F., Dam-Johansen, K., & Larsen, O. H. (1998) · Fuel Processing Technology · doi:10.1016/s0378-3820(97)00062-3 · Cited by 258 · cited 2×
“The ability of KCl to form low-melting eutectics with transition metal chlorides in the temperature range (200 – 500 oC) has been reported previously [17,39].”
BackgroundSelf-citationThe formation of submicron aerosol particles, HCl and SO2 in straw-fired boilers
Christensen, K. A., Stenholm, M., & Livbjerg, H. (1998) · Journal of Aerosol Science · doi:10.1016/s0021-8502(98)00013-5 · Cited by 196
Influence of deposit formation on corrosion at a straw-fired boiler
Hansen, L. A., Nielsen, H. P., Frandsen, F. J., Dam-Johansen, K., Hørlyck, S., & Karlsson, A. (2000) · Fuel Processing Technology · doi:10.1016/s0378-3820(00)00063-1 · Cited by 195 · cited 1×
“In a melt phase, the rate of sulphation is significantly enhanced and more Cl is generated, which is able to penetrate the porous oxide layer and induce further chlorination of alloying elements [32,33,46].”
BackgroundSelf-citationKCl Induced Corrosion of a 304-type Austenitic Stainless Steel at 600°C; The Role of Potassium
Pettersson, J., Asteman, H., Svensson, J. E., & Johansson, L. G. (2005) · Oxidation of Metals · doi:10.1007/s11085-005-5704-3 · Cited by 182 · cited 3×
“Moreover Cl plays a vital role in the catastrophic corrosion observed in heat exchangers (superheaters) in biomass-fired boilers, especially those utilizing straw [4,5].”
BackgroundSulfation of Potassium Chloride at Combustion Conditions
Iisa, K., Lu, Y., & Salmenoja, K. (1999) · Energy & Fuels · doi:10.1021/ef990057a · Cited by 169 · cited 1×
“The sulphation of KCl will proceed with the adsorption of SO2 on the KCl particles, forming the SO3 intermediate, according to a Langmuir adsorption model as proposed for NaCl sulphation [42,43].”
MethodAlkali Induced High Temperature Corrosion of Stainless Steel: The Influence of NaCl, KCl and CaCl2
Karlsson, S., Pettersson, J., Johansson, L. G., & Svensson, J. E. (2012) · Oxidation of Metals · doi:10.1007/s11085-012-9293-7 · Cited by 118
Pettersson, C., Pettersson, J., Asteman, H., Svensson, J.-E., & Johansson, L.-G. (2006) · Corrosion Science · doi:10.1016/j.corsci.2005.05.018 · Cited by 112
Cited by
Mlonka-Mędrala, A., Gołombek, K., Buk, P., Cieślik, E., & Nowak, W. (2019) · Energy · doi:10.1016/j.energy.2019.116062 · Cited by 46
Okoro, S. C., Kiamehr, S., Montgomery, M., Frandsen, F. J., & Pantleon, K. (2017) · Materials and Corrosion · doi:10.1002/maco.201609173 · Cited by 27
Self-citationOkoro, S. C., Montgomery, M., Frandsen, F. J., & Pantleon, K. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b01232 · Cited by 24
Self-citationDeposit Shedding in Biomass-Fired Boilers: Shear Adhesion Strength Measurements
Laxminarayan, Y., Jensen, P. A., Wu, H., Frandsen, F. J., Sander, B., & Glarborg, P. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b01312 · Cited by 23
“Several corrosion studies in literature indicate that the rate of corrosion decreases considerably over time [2, 5, 12].”
BackgroundSelf-citationKrumm, L., & Galetz, M. C. (2020) · Materials and Corrosion · doi:10.1002/maco.201911091 · Cited by 8
Metadata
- Authors
- Okoro, S. C., Montgomery, M., Frandsen, F. J., & Pantleon, K.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-10-08
- Volume
- 28
- Issue
- 10
- Pages
- 6447-6458
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2334629253
- Cited by
- 44
- References
- 15
- FWCI
- 7.34
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.