The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Change of CO2Carrying Capacity of CaO in Isothermal Recarbonation−Decomposition Cycles
Abstract
The change of CO 2 carrying capacity of CaO sorbents prepared from different precursors has been studied using thermogravimetric analysis in a long series of isothermal recarbonation−decomposition cycles in the temperature range of 750−850 °C. The residual capacity of the CaO sorbents after a large number of cycles was found to depend on the precursor type, the experimental temperature, and the duration of the recarbonation stage. The residual capacities of the CaO derived from the powdered calcium carbonates were much higher than that of the CaO produced from the crystalline CaCO 3 . A simple tentative model has been suggested, according to which recarbonation−decomposition cycles result in formation of the interconnected CaO network that acts as a refractory support and determines sorption properties of the material. By using a new model, a simple synthesis procedure has been suggested that produces CaO sorbents with high residual CO 2 carrying capacities.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermochemical Data of Pure Substances
Barin, I. (1995) · doi:10.1002/9783527619825 · Cited by 4,241
Heterogeneous catalysis in practice
Satterfield, C. N. (1980) · McGraw-Hill eBooks · Cited by 1,012
CO2 Capture Capacity of CaO in Long Series of Carbonation/Calcination Cycles
Grasa, G. S., & Abanades, J. C. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0606946 · Cited by 757
Effect of the product layer on the kinetics of the CO2‐lime reaction
Bhatia, S. K., & Perlmutter, D. D. (1983) · AIChE Journal · doi:10.1002/aic.690290111 · Cited by 657
Review—calcination and carbonation of limestone during thermal cycling for CO2 sequestration
Stanmore, B. R., & Gilot, P. (2005) · Fuel Processing Technology · doi:10.1016/j.fuproc.2005.01.023 · Cited by 530
The reversibility of the reaction CaCO3 ⇄ CaO+CO2
Barker, R. (1973) · Journal of Applied Chemistry and Biotechnology · doi:10.1002/jctb.5020231005 · Cited by 508
Sorption‐enhanced reaction process for hydrogen production
Hufton, J. R., Mayorga, S., & Sircar, S. (1999) · AIChE Journal · doi:10.1002/aic.690450205 · Cited by 483
Determination of the Critical Product Layer Thickness in the Reaction of CaO with CO2
Alvarez, D., & Abanades, J. C. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie050305s · Cited by 401
Sintering of nascent calcium oxide
H. Borgwardt, R. (1989) · Chemical Engineering Science · doi:10.1016/0009-2509(89)85232-7 · Cited by 306
Production of hydrogen by cyclic sorption enhanced reaction process
Waldron, W. E., Hufton, J. R., & Sircar, S. (2001) · AIChE Journal · doi:10.1002/aic.690470623 · Cited by 109
Cited by
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
CO2 capture by solid adsorbents and their applications: current status and new trends
Wang, Q., Luo, J., Zhong, Z., & Borgna, A. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00064g · Cited by 1,611
The calcium looping cycle for large-scale CO2 capture
Blamey, J., Anthony, E. J., Wang, J., & Fennell, P. S. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.10.001 · Cited by 1,044
Review of recent advances in carbon dioxide separation and capture
Kenarsari, S. D., Yang, D., Jiang, G., Zhang, S., Wang, J., Russell, A. G., Wei, Q., & Fan, M. (2013) · RSC Advances · doi:10.1039/c3ra43965h · Cited by 784
Florin, N. H., & Harris, A. T. (2008) · Chemical Engineering Science · doi:10.1016/j.ces.2007.09.011 · Cited by 482
Thermal Activation of CaO-Based Sorbent and Self-Reactivation during CO2 Capture Looping Cycles
Manovic, V., & Anthony, E. J. (2008) · Environmental Science & Technology · doi:10.1021/es800152s · Cited by 418
Dean, C. C., Blamey, J., Florin, N. H., Al-Jeboori, M. J., & Fennell, P. S. (2011) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2010.10.013 · Cited by 375
Calcium looping sorbents for CO2 capture
Erans, M., Manovic, V., & Anthony, E. J. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.07.074 · Cited by 369
CaO‐Based CO2 Sorbents: From Fundamentals to the Development of New, Highly Effective Materials
Kierzkowska, A. M., Pacciani, R., & Müller, C. R. (2013) · ChemSusChem · doi:10.1002/cssc.201300178 · Cited by 351
Demonstration of steady state CO2 capture in a 1.7MWth calcium looping pilot
Arias, B., Diego, M. E., Abanades, J. C., Lorenzo, M., Diaz, L., Martínez, D., Alvarez, J., & Sánchez-Biezma, A. (2013) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2013.07.014 · Cited by 344
Shokrollahi Yancheshmeh, M., Radfarnia, H. R., & Iliuta, M. C. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.06.060 · Cited by 331
Hanak, D. P., Anthony, E. J., & Manovic, V. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01228g · Cited by 330
Performance Enhancement of Calcium Oxide Sorbents for Cyclic CO2 Capture—A Review
Liu, W., An, H., Qin, C., Yin, J., Wang, G., Feng, B., & Xu, M. (2012) · Energy & Fuels · doi:10.1021/ef300220x · Cited by 320
Recent developments and consideration issues in solid adsorbents for CO2 capture from flue gas
Nie, L., Mu, Y., Jin, J., Chen, J., & Mi, J. (2018) · Chinese Journal of Chemical Engineering · doi:10.1016/j.cjche.2018.07.012 · Cited by 122
Metadata
- Authors
- Lysikov, A. I., Salanov, A. N., & Okunev, A. G.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-05-15
- Volume
- 46
- Issue
- 13
- Pages
- 4633-4638
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2141510090
- Cited by
- 278
- References
- 12
- FWCI
- 38.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.