The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Amine-Modified SBA-15: Effect of Pore Structure on the Performance for CO2 Capture
Abstract
Several SBA-15 silica materials with different pore structures were synthesized and functionalized with poly(ethyleneimine) (PEI). The as-prepared materials were characterized by XRD, SEM, TG, FT-IR, and N 2 physisorption techniques followed by testing for CO 2 capture using a N 2 stream containing 15.1 v/v% CO 2 in the temperature range of 30−75 °C. The results showed that the CO 2 adsorption capacity linearly increased with the total pore volume of the SBA-15 phases in the tested temperature range ( R 2 > 0.94). Temperature also showed a strong influence on CO 2 adsorption capacity. SBA-15 material with the largest pore volume (1.14 cm 3 g −1 ) exhibited the largest CO 2 adsorption capacity (105.2 mg g −1 adsorbent) with 15.1 v/v% CO 2 in N 2 at 75 °C and atmospheric pressure. Pore size was found not to be the main factor influencing the CO 2 adsorption capacity of these PEI-modified SBA-15 materials. Adsorption−desorption cycles (12) revealed that the adsorbents with PEI loaded inside the pore channels were found to be quite stable, as they retained their CO 2 adsorption capacity with many cycles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Song, C. (2006) · Catalysis Today · doi:10.1016/j.cattod.2006.02.029 · Cited by 1,809
Xu, X., Song, C., Andresen, J. M., Miller, B. G., & Scaroni, A. W. (2002) · Energy & Fuels · doi:10.1021/ef020058u · Cited by 1,097
Amine-Grafted MCM-48 and Silica Xerogel as Superior Sorbents for Acidic Gas Removal from Natural Gas
Huang, H. Y., Yang, R. T., Chinn, D., & Munson, C. L. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie020440u · Cited by 713
Adsorptive removal of carbon dioxide using polyethyleneimine-loaded mesoporous silica materials
Son, W.-J., Choi, J.-S., & Ahn, W.-S. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2007.10.049 · Cited by 618
Adsorption characteristics of carbon dioxide on organically functionalized SBA-15
Hiyoshi, N., Yogo, K., & Yashima, T. (2005) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2005.06.010 · Cited by 588
Idem, R., Wilson, M., Tontiwachwuthikul, P., Chakma, A., Veawab, A., Aroonwilas, A., & Gelowitz, D. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie050569e · Cited by 587
Ravikovitch, P. I., & Neimark, A. V. (2001) · The Journal of Physical Chemistry B · doi:10.1021/jp010621u · Cited by 534
“Molecular Basket” Sorbents for Separation of CO2 and H2S from Various Gas Streams
Ma, X., Wang, X., & Song, C. (2009) · Journal of the American Chemical Society · doi:10.1021/ja8074105 · Cited by 532
CO2 Capture by As‐Prepared SBA‐15 with an Occluded Organic Template
Yue, M. B., Chun, Y., Cao, Y., Dong, X., & Zhu, J. H. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600427 · Cited by 424
Franchi, R. S., Harlick, P. J. E., & Sayari, A. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0504194 · Cited by 400
Amine-modified ordered mesoporous silica: Effect of pore size on carbon dioxide capture
Zeleňák, V., Badaničová, M., Halamová, D., Čejka, J., Zukal, A., Murafa, N., & Goerigk, G. (2008) · Chemical Engineering Journal · doi:10.1016/j.cej.2008.07.025 · Cited by 395
In-Situ Infrared Study of CO2 Adsorption on SBA-15 Grafted with γ-(Aminopropyl)triethoxysilane
Chang, A. C. C., Chuang, S. S. C., Gray, M., & Soong, Y. (2003) · Energy & Fuels · doi:10.1021/ef020176h · Cited by 389
Wang, X., Schwartz, V., Clark, J. C., Ma, X., Overbury, S. H., Xu, X., & Song, C. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp809946y · Cited by 381
Tailoring Pore Properties of MCM-48 Silica for Selective Adsorption of CO2
Kim, S., Ida, J., Guliants, V. V., & Lin, Y. S. (2005) · The Journal of Physical Chemistry B · doi:10.1021/jp045634x · Cited by 332
Aminopropyl-functionalized mesoporous silicas as CO2 adsorbents
Knowles, G. P., Graham, J. V., Delaney, S. W., & Chaffee, A. L. (2005) · Fuel Processing Technology · doi:10.1016/j.fuproc.2005.01.014 · Cited by 326
Zelenak, V., Halamova, D., Gaberova, L., Bloch, E., & Llewellyn, P. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2008.04.023 · Cited by 297
Ethylenediamine-Modified SBA-15 as Regenerable CO2 Sorbent
Zheng, F., Tran, D. N., Busche, B. J., Fryxell, G. E., Addleman, R. S., Zemanian, T. S., & Aardahl, C. L. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie049488t · Cited by 261
Improved immobilized carbon dioxide capture sorbents
Gray, M. L., Soong, Y., Champagne, K. J., Pennline, H., Baltrus, J. P., Stevens, R. W., Khatri, R., Chuang, S. S. C., & Filburn, T. (2005) · Fuel Processing Technology · doi:10.1016/j.fuproc.2005.01.005 · Cited by 250
Diethylenetriamine[propyl(silyl)]-Functionalized (DT) Mesoporous Silicas as CO2 Adsorbents
Knowles, G. P., Delaney, S. W., & Chaffee, A. L. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie050589g · Cited by 242
Bhagiyalakshmi, M., Yun, L. J., Anuradha, R., & Jang, H. T. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.10.097 · Cited by 236
Adsorption of CO2 onto amine-grafted mesoporous silicas
Chang, F.-Y., Chao, K.-J., Cheng, H.-H., & Tan, C.-S. (2009) · Separation and Purification Technology · doi:10.1016/j.seppur.2009.08.016 · Cited by 235
Functionalised micro-/mesoporous silica for the adsorption of carbon dioxide
Knöfel, C., Descarpentries, J., Benzaouia, A., Zeleňák, V., Mornet, S., Llewellyn, P. L., & Hornebecq, V. (2007) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2006.09.018 · Cited by 230
Khatri, R. A., Chuang, S. S. C., Soong, Y., & Gray, M. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie048997s · Cited by 220
Ordered mesoporous silica (OMS) as an adsorbent and membrane for separation of carbon dioxide (CO2)
Chew, T.-L., Ahmad, A. L., & Bhatia, S. (2010) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2009.12.001 · Cited by 218
Belmabkhout, Y., Serna-Guerrero, R., & Sayari, A. (2009) · Chemical Engineering Science · doi:10.1016/j.ces.2009.03.017 · Cited by 202
Fan, J., Yu, C., Wang, L., Tu, B., Zhao, D., Sakamoto, Y., & Terasaki, O. (2001) · Journal of the American Chemical Society · doi:10.1021/ja011564l · Cited by 181
Further investigations of CO2 capture using triamine-grafted pore-expanded mesoporous silica
Serna-Guerrero, R., Belmabkhout, Y., & Sayari, A. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.01.041 · Cited by 166
Tailoring properties of SBA-15 materials by controlling conditions of hydrothermal synthesis
Fulvio, P. F., Pikus, S., & Jaroniec, M. (2005) · Journal of Materials Chemistry · doi:10.1039/b511346f · Cited by 154
Highly siliceous MCM-48 from rice husk ash for CO2 adsorption
Jang, H. T., Park, Y., Ko, Y. S., Lee, J. Y., & Margandan, B. (2009) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2009.02.008 · Cited by 143
Liu, X., Zhou, L., Fu, X., Sun, Y. J., Su, W., & Zhou, Y. (2006) · Chemical Engineering Science · doi:10.1016/j.ces.2006.11.005 · Cited by 140
Adsorption of carbon dioxide on organically functionalized SBA-16
Wei, J., Shi, J., Pan, H., Zhao, W., Ye, Q., & Shi, Y. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2008.04.028 · Cited by 135
Rosenholm, J. M., Penninkangas, A., & Lindén, M. (2006) · Chemical Communications · doi:10.1039/b607886a · Cited by 124
Stepwise growth of melamine-based dendrimers into mesopores and their CO2 adsorption properties
Liang, Z., Fadhel, B. A., Schneider, C. J., & Chaffee, A. L. (2007) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2007.08.030 · Cited by 107
Araki, S., Doi, H., Sano, Y., et al. (2009) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2009.07.024 · Cited by 93
Highly Stable Amine-modified Mesoporous Silica Materials for Efficient CO2 Capture
Liu, S., Wu, C., Lee, H.-K., & Liu, S.-B. (2009) · Topics in Catalysis · doi:10.1007/s11244-009-9413-z · Cited by 81
CO2 adsorption by PAMAM dendrimers: Significant effect of impregnation into SBA-15
Fadhel, B. A., Hearn, M. T. W., & Chaffee, A. L. (2009) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2009.03.040 · Cited by 69
Cited by
Li, L., Zhao, N., Wei, W., & Sun, Y. (2013) · Fuel · doi:10.1016/j.fuel.2011.08.022 · Cited by 480
Amine-oxide hybrid materials for acid gas separations
Bollini, P., Didas, S. A., & Jones, C. W. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12522b · Cited by 397
CO2 capture adsorbents functionalized by amine – bearing polymers: A review
Varghese, A. M., & Karanikolos, G. N. (2020) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2020.103005 · Cited by 363
Development of hybrid amine-functionalized MCM-41 sorbents for CO2 capture
Wang, X., Chen, L., & Guo, Q. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.08.107 · Cited by 275
Chen, Z., Deng, S., Wei, H., Wang, B., Huang, J., & Yu, G. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am400661b · Cited by 263
Metadata
- Authors
- Yan, X., Zhang, L., Zhang, Y., Yang, G., & Yan, Z.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-02-15
- Volume
- 50
- Issue
- 6
- Pages
- 3220-3226
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2085720812
- Cited by
- 275
- References
- 37
- FWCI
- 38.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.