CoChat

CO2 Capture from Flue Gas in an Existing Coal-Fired Power Plant by Two Successive Pilot-Scale VPSA Units

Wang, Lu, Yang, Ying, Shen, Wenlong, Kong, Xiangming, Li, Ping, Yu, Jianguo, Rodrigues, Alirio E. · 2013 · Industrial & Engineering Chemistry Research
Cited by 152

The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.

Abstract

CO 2 capture and storage (CCS) is an effective method for achieving CO 2 mitigation while simultaneously keeping energy supplies secure. To put CCS into practice, it is important to develop energy-efficient industrial technologies for CO 2 capture. In this work, a pilot-scale demonstration of carbon capture from flue gas by adsorption technology was performed in an existing coal-fired power plant in China, and the power energy consumption to capture 1 kg of CO 2 was measured onsite; furthermore, the feasibility and efficiency of adsorption technology for postcombustion CO 2 capture were investigated. The pilot-scale carbon capture plant consisted of two successive VPSA units coupled with a dehumidifying unit. In the dehumidifying unit, water vapor in the desulfurized flue gas was removed by alumina adsorption. Then, CO 2 in the dehumidified flue gas was captured by two successive VPSA units, where the three-bed eight-step VPSA process was employed in the first unit packed with zeolite 13X APG, and the second two-bed six-step VPSA unit was packed with pitched activated carbon beads. A roots blower was used to supply the desulfurized flue gas to the pilot-scale carbon capture plant at a controlled flow rate, and both a reciprocating pump and a diaphragm pump were employed to desorb adsorbents under vacuum pressure in the two-stage units and recover high-purity CO 2 for subsequent storage or utilization. Some key assessment parameters were measured onsite, including the flow rate of flue gas, CO 2 recovery from flue gas, CO 2 purity in the product gas, and power energy consumption to capture 1 kg of CO 2, and the experimental results were verified by numerical simulations using a multibed VPSA modeling framework. Based on the experimental and simulated results, CO 2 capture from flue gas in an existing coal-fired power plant by two successive VPSA units was evaluated.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/ie4009716

Cites

5 of 5 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 5 references

Cited by

Metadata

Authors
Wang, L., Yang, Y., Shen, W., Kong, X., Li, P., Yu, J., & Rodrigues, A. E.
Venue
Industrial & Engineering Chemistry Research
Published
2013-06-03
Volume
52
Issue
23
Pages
7947-7955
ISSN
  • 0888-5885 (ISSN-L)
  • 1520-5045
OpenAlex
W2088839959
Cited by
152
References
5
FWCI
14.61
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.