The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
The Li-Ion Rechargeable Battery: A Perspective
Abstract
Each cell of a battery stores electrical energy as chemical energy in two electrodes, a reductant (anode) and an oxidant (cathode), separated by an electrolyte that transfers the ionic component of the chemical reaction inside the cell and forces the electronic component outside the battery. The output on discharge is an external electronic current I at a voltage V for a time Δt. The chemical reaction of a rechargeable battery must be reversible on the application of a charging I and V. Critical parameters of a rechargeable battery are safety, density of energy that can be stored at a specific power input and retrieved at a specific power output, cycle and shelf life, storage efficiency, and cost of fabrication. Conventional ambient-temperature rechargeable batteries have solid electrodes and a liquid electrolyte. The positive electrode (cathode) consists of a host framework into which the mobile (working) cation is inserted reversibly over a finite solid-solution range. The solid-solution range, which is reduced at higher current by the rate of transfer of the working ion across electrode/electrolyte interfaces and within a host, limits the amount of charge per electrode formula unit that can be transferred over the time Δt = Δt(I). Moreover, the difference between energies of the LUMO and the HOMO of the electrolyte, i.e., electrolyte window, determines the maximum voltage for a long shelf and cycle life. The maximum stable voltage with an aqueous electrolyte is 1.5 V; the Li-ion rechargeable battery uses an organic electrolyte with a larger window, which increase the density of stored energy for a given Δt. Anode or cathode electrochemical potentials outside the electrolyte window can increase V, but they require formation of a passivating surface layer that must be permeable to Li(+) and capable of adapting rapidly to the changing electrode surface area as the electrode changes volume during cycling. A passivating surface layer adds to the impedance of the Li(+) transfer across the electrode/electrolyte interface and lowers the cycle life of a battery cell. Moreover, formation of a passivation layer on the anode robs Li from the cathode irreversibly on an initial charge, further lowering the reversible Δt. These problems plus the cost of quality control of manufacturing plague development of Li-ion rechargeable batteries that can compete with the internal combustion engine for powering electric cars and that can provide the needed low-cost storage of electrical energy generated by renewable wind and/or solar energy. Chemists are contributing to incremental improvements of the conventional strategy by investigating and controlling electrode passivation layers, improving the rate of Li(+) transfer across electrode/electrolyte interfaces, identifying electrolytes with larger windows while retaining a Li(+) conductivity σ(Li) > 10(-3) S cm(-1), synthesizing electrode morphologies that reduce the size of the active particles while pinning them on current collectors of large surface area accessible by the electrolyte, lowering the cost of cell fabrication, designing displacement-reaction anodes of higher capacity that allow a safe, fast charge, and designing alternative cathode hosts. However, new strategies are needed for batteries that go beyond powering hand-held devices, such as using electrode hosts with two-electron redox centers; replacing the cathode hosts by materials that undergo displacement reactions (e.g. sulfur) by liquid cathodes that may contain flow-through redox molecules, or by catalysts for air cathodes; and developing a Li(+) solid electrolyte separator membrane that allows an organic and aqueous liquid electrolyte on the anode and cathode sides, respectively. Opportunities exist for the chemist to bring together oxide and polymer or graphene chemistry in imaginative morphologies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
Self-citationA Perovskite Oxide Optimized for Oxygen Evolution Catalysis from Molecular Orbital Principles
Suntivich, J., May, K. J., Gasteiger, H. A., Goodenough, J. B., & Shao-Horn, Y. (2011) · Science · doi:10.1126/science.1212858 · Cited by 5,441
Self-citationLixCoO2 (0<x<-1): A new cathode material for batteries of high energy density
Mizushima, K., Jones, P. C., Wiseman, P. J., & Goodenough, J. B. (1980) · Materials Research Bulletin · doi:10.1016/0025-5408(80)90012-4 · Cited by 3,856
Self-citationStability of polyatomic molecules in degenerate electronic states - I—Orbital degeneracy
Jahn, H. A., & Teller, E. (1937) · Proceedings of the Royal Society of London. Series A - Mathematical and Physical Sciences · doi:10.1098/rspa.1937.0142 · Cited by 3,215
Suntivich, J., Gasteiger, H. A., Yabuuchi, N., Nakanishi, H., Goodenough, J. B., & Shao-Horn, Y. (2011) · Nature Chemistry · doi:10.1038/nchem.1069 · Cited by 2,904
Self-citationPeled, E. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2128859 · Cited by 2,899
Challenges and Prospects of Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., & Su, Y.-S. (2013) · Accounts of Chemical Research · doi:10.1021/ar300179v · Cited by 2,380
Fast Na+-ion transport in skeleton structures
Goodenough, J. B., Hong, H. Y.-P., & Kafalas, J. A. (1976) · Materials Research Bulletin · doi:10.1016/0025-5408(76)90077-5 · Cited by 2,284
Self-citationScrosati, B., Magistris, A., Mari, C. M., & Mariotto, G. (1993) · Springer eBooks · doi:10.1007/978-94-011-1916-0 · Cited by 2,218
Electrical Energy Storage and Intercalation Chemistry
Whittingham, M. S. (1976) · Science · doi:10.1126/science.192.4244.1126 · Cited by 1,919
Lithium insertion into manganese spinels
Thackeray, M. M., David, W. I. F., Bruce, P. G., & Goodenough, J. B. (1983) · Materials Research Bulletin · doi:10.1016/0025-5408(83)90138-1 · Cited by 1,778
Self-citationStudies of Lithium Intercalation into Carbons Using Nonaqueous Electrochemical Cells
Fong, R., von Sacken, U., & Dahn, J. R. (1990) · Journal of The Electrochemical Society · doi:10.1149/1.2086855 · Cited by 1,452
Effect of Structure on the Fe3 + / Fe2 + Redox Couple in Iron Phosphates
Padhi, A. K., Nanjundaswamy, K. S., Masquelier, C., Okada, S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837649 · Cited by 1,295
Self-citationA Critical Review of Li/Air Batteries
Christensen, J., Albertus, P., Sanchez-Carrera, R. S., Lohmann, T., Kozinsky, B., Liedtke, R., Ahmed, J., & Kojic, A. (2011) · Journal of The Electrochemical Society · doi:10.1149/2.086202jes · Cited by 1,041
Electrochemical extraction of lithium from LiMn2O4
Thackeray, M. M., Johnson, P. J., de Picciotto, L. A., Bruce, P. G., & Goodenough, J. B. (1984) · Materials Research Bulletin · doi:10.1016/0025-5408(84)90088-6 · Cited by 947
Self-citationLu, Z., MacNeil, D. D., & Dahn, J. R. (2001) · Electrochemical and Solid-State Letters · doi:10.1149/1.1407994 · Cited by 941
Goodenough, J. B., & Loeb, A. L. (1955) · Physical Review · doi:10.1103/physrev.98.391 · Cited by 706
Self-citationDesign of electrolyte solutions for Li and Li-ion batteries: a review
Aurbach, D., Talyosef, Y., Markovsky, B., Markevich, E., Zinigrad, E., Asraf, L., Gnanaraj, J. S., & Kim, H.-J. (2004) · Electrochimica Acta · doi:10.1016/j.electacta.2004.01.090 · Cited by 682
Effect of fluoroethylene carbonate additive on interfacial properties of silicon thin-film electrode
Choi, N.-S., Yew, K. H., Lee, K. Y., Sung, M., Kim, H., & Kim, S.-S. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.05.049 · Cited by 654
A reversible graphite-lithium negative electrode for electrochemical generators
Yazami, R., & Touzain, P. (1983) · Journal of Power Sources · doi:10.1016/0378-7753(83)87040-2 · Cited by 624
A Lithium/Dissolved Sulfur Battery with an Organic Electrolyte
Rauh, R. D., Abraham, K. M., Pearson, G. F., Surprenant, J. K., & Brummer, S. B. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2129079 · Cited by 592
Conducting‐Polymer/Iron‐Redox‐ Couple Composite Cathodes for Lithium Secondary Batteries
Park, K., Schougaard, S. B., & Goodenough, J. B. (2007) · Advanced Materials · doi:10.1002/adma.200600369 · Cited by 410
Self-citationStructural characterization of the lithiated iron oxides LixFe3O4 and LixFe2O3 (0<x<2)
Thackeray, M. M., David, W. I. F., & Goodenough, J. B. (1982) · Materials Research Bulletin · doi:10.1016/0025-5408(82)90029-0 · Cited by 390
Self-citationSafe and fast-charging Li-ion battery with long shelf life for power applications
Zaghib, K., Dontigny, M., Guerfi, A., Charest, P., Rodrigues, I., Mauger, A., & Julien, C. M. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.11.093 · Cited by 363
Padhi, A. K., Nanjundaswamy, K. S., Masquelier, C., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837868 · Cited by 361
Self-citationElectrochemical and Infrared Studies of the Reduction of Organic Carbonates
Zhang, X., Kostecki, R., Richardson, T. J., Pugh, J. K., & Ross, P. N. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1415547 · Cited by 351
Electrochemical and physical properties of the LixNi1$minus;yCoyO2 phases
DELMAS, C. (1992) · Solid State Ionics · doi:10.1016/0167-2738(92)90402-b · Cited by 348
Bartlett, N. (1982) · Carbon · doi:10.1016/0008-6223(82)90423-7 · Cited by 338
Liu, J., & Manthiram, A. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp904276t · Cited by 291
Kiehne, H.-A. (2003) · CRC Press eBooks · doi:10.1201/9780203911853 · Cited by 271
Lithium ion batteries : fundamentals and performance
脇原, 将., & 山本, 治. (1998) · Medical Entomology and Zoology · Cited by 258
A Soft Chemistry Approach to Coating of LiFePO4 with a Conducting Polymer
Lepage, D., Michot, C., Liang, G., Gauthier, M., & Schougaard, S. B. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201101661 · Cited by 214
Improving Lithium Batteries by Tethering Carbon-Coated LiFePO[sub 4] to Polypyrrole
Huang, Y., Park, K.-S., & Goodenough, J. B. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2360769 · Cited by 180
Self-citationUnsupported claims of ultrafast charging of LiFePO4 Li-ion batteries
Zaghib, K., Goodenough, J. B., Mauger, A., et al. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.05.043 · Cited by 143
Self-citationChemical Extraction of Lithium from Layered LiCoO2
Gupta, R., & Manthiram, A. (1996) · Journal of Solid State Chemistry · doi:10.1006/jssc.1996.0067 · Cited by 115
Arunkumar, T., & Manthiram, A. (2005) · Electrochimica Acta · doi:10.1016/j.electacta.2005.03.033 · Cited by 104
Size and charge effects on the structural stability of LiMO2 (M = transition metal) compounds
Wu, E. J., Tepesch, P. D., & Ceder, G. (1998) · Philosophical Magazine B · doi:10.1080/13642819808206403 · Cited by 103
Enhanced Charge-Transfer Kinetics by Anion Surface Modification of LiFePO4
Park, K., Xiao, P., Kim, S.-Y., Dylla, A. G., Choi, Y.-M., Henkelman, G., Stevenson, K. J., & Goodenough, J. B. (2012) · Chemistry of Materials · doi:10.1021/cm301569m · Cited by 73
Self-citationEgashira, M., Takahashi, H., Okada, S., & Yamaki, J.-I. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00553-x · Cited by 70
Kim, Y., Park, K., Song, S. H., Han, J., & Goodenough, J. B. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3151856 · Cited by 54
Self-citation
Cited by
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Liu, Y., Ai, K., & Lu, L. (2014) · Chemical Reviews · doi:10.1021/cr400407a · Cited by 4,794
Lithium battery chemistries enabled by solid-state electrolytes
Manthiram, A., Yu, X., & Wang, S. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.103 · Cited by 4,689
A solid future for battery development
Janek, J., & Zeier, W. G. (2016) · Nature Energy · doi:10.1038/nenergy.2016.141 · Cited by 3,979
Lithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
Metadata
- Authors
- Goodenough, J. B., & Park, K.-S.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-01-18
- Volume
- 135
- Issue
- 4
- Pages
- 1167-1176
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2021172010
- Cited by
- 9,962
- References
- 40
- FWCI
- 244.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.