The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
The Li-Ion Rechargeable Battery: A Perspective
Abstract
Each cell of a battery stores electrical energy as chemical energy in two electrodes, a reductant (anode) and an oxidant (cathode), separated by an electrolyte that transfers the ionic component of the chemical reaction inside the cell and forces the electronic component outside the battery. The output on discharge is an external electronic current I at a voltage V for a time Δt. The chemical reaction of a rechargeable battery must be reversible on the application of a charging I and V. Critical parameters of a rechargeable battery are safety, density of energy that can be stored at a specific power input and retrieved at a specific power output, cycle and shelf life, storage efficiency, and cost of fabrication. Conventional ambient-temperature rechargeable batteries have solid electrodes and a liquid electrolyte. The positive electrode (cathode) consists of a host framework into which the mobile (working) cation is inserted reversibly over a finite solid-solution range. The solid-solution range, which is reduced at higher current by the rate of transfer of the working ion across electrode/electrolyte interfaces and within a host, limits the amount of charge per electrode formula unit that can be transferred over the time Δt = Δt(I). Moreover, the difference between energies of the LUMO and the HOMO of the electrolyte, i.e., electrolyte window, determines the maximum voltage for a long shelf and cycle life. The maximum stable voltage with an aqueous electrolyte is 1.5 V; the Li-ion rechargeable battery uses an organic electrolyte with a larger window, which increase the density of stored energy for a given Δt. Anode or cathode electrochemical potentials outside the electrolyte window can increase V, but they require formation of a passivating surface layer that must be permeable to Li(+) and capable of adapting rapidly to the changing electrode surface area as the electrode changes volume during cycling. A passivating surface layer adds to the impedance of the Li(+) transfer across the electrode/electrolyte interface and lowers the cycle life of a battery cell. Moreover, formation of a passivation layer on the anode robs Li from the cathode irreversibly on an initial charge, further lowering the reversible Δt. These problems plus the cost of quality control of manufacturing plague development of Li-ion rechargeable batteries that can compete with the internal combustion engine for powering electric cars and that can provide the needed low-cost storage of electrical energy generated by renewable wind and/or solar energy. Chemists are contributing to incremental improvements of the conventional strategy by investigating and controlling electrode passivation layers, improving the rate of Li(+) transfer across electrode/electrolyte interfaces, identifying electrolytes with larger windows while retaining a Li(+) conductivity σ(Li) > 10(-3) S cm(-1), synthesizing electrode morphologies that reduce the size of the active particles while pinning them on current collectors of large surface area accessible by the electrolyte, lowering the cost of cell fabrication, designing displacement-reaction anodes of higher capacity that allow a safe, fast charge, and designing alternative cathode hosts. However, new strategies are needed for batteries that go beyond powering hand-held devices, such as using electrode hosts with two-electron redox centers; replacing the cathode hosts by materials that undergo displacement reactions (e.g. sulfur) by liquid cathodes that may contain flow-through redox molecules, or by catalysts for air cathodes; and developing a Li(+) solid electrolyte separator membrane that allows an organic and aqueous liquid electrolyte on the anode and cathode sides, respectively. Opportunities exist for the chemist to bring together oxide and polymer or graphene chemistry in imaginative morphologies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
Self-citationA Perovskite Oxide Optimized for Oxygen Evolution Catalysis from Molecular Orbital Principles
Suntivich, J., May, K. J., Gasteiger, H. A., Goodenough, J. B., & Shao-Horn, Y. (2011) · Science · doi:10.1126/science.1212858 · Cited by 5,441
Self-citationLixCoO2 (0<x<-1): A new cathode material for batteries of high energy density
Mizushima, K., Jones, P. C., Wiseman, P. J., & Goodenough, J. B. (1980) · Materials Research Bulletin · doi:10.1016/0025-5408(80)90012-4 · Cited by 3,856
Self-citationStability of polyatomic molecules in degenerate electronic states - I—Orbital degeneracy
Jahn, H. A., & Teller, E. (1937) · Proceedings of the Royal Society of London. Series A - Mathematical and Physical Sciences · doi:10.1098/rspa.1937.0142 · Cited by 3,215
Suntivich, J., Gasteiger, H. A., Yabuuchi, N., Nakanishi, H., Goodenough, J. B., & Shao-Horn, Y. (2011) · Nature Chemistry · doi:10.1038/nchem.1069 · Cited by 2,904
Self-citationPeled, E. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2128859 · Cited by 2,899
Challenges and Prospects of Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., & Su, Y.-S. (2013) · Accounts of Chemical Research · doi:10.1021/ar300179v · Cited by 2,380
Fast Na+-ion transport in skeleton structures
Goodenough, J. B., Hong, H. Y.-P., & Kafalas, J. A. (1976) · Materials Research Bulletin · doi:10.1016/0025-5408(76)90077-5 · Cited by 2,284
Self-citationScrosati, B., Magistris, A., Mari, C. M., & Mariotto, G. (1993) · Springer eBooks · doi:10.1007/978-94-011-1916-0 · Cited by 2,218
Electrical Energy Storage and Intercalation Chemistry
Whittingham, M. S. (1976) · Science · doi:10.1126/science.192.4244.1126 · Cited by 1,919
Cited by
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Liu, Y., Ai, K., & Lu, L. (2014) · Chemical Reviews · doi:10.1021/cr400407a · Cited by 4,794
Lithium battery chemistries enabled by solid-state electrolytes
Manthiram, A., Yu, X., & Wang, S. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.103 · Cited by 4,689
A solid future for battery development
Janek, J., & Zeier, W. G. (2016) · Nature Energy · doi:10.1038/nenergy.2016.141 · Cited by 3,979
Lithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
Mixed Transition‐Metal Oxides: Design, Synthesis, and Energy‐Related Applications
Yuan, C., Wu, H. B., Xie, Y., & Lou, X. W. (. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201303971 · Cited by 2,304
An, S. J., Li, J., Daniel, C., Mohanty, D., Nagpure, S., & Wood, D. L. (2016) · Carbon · doi:10.1016/j.carbon.2016.04.008 · Cited by 2,121
Review on recent progress of nanostructured anode materials for Li-ion batteries
Goriparti, S., Miele, E., De Angelis, F., Di Fabrizio, E., Proietti Zaccaria, R., & Capiglia, C. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.103 · Cited by 2,092
Zn/MnO2 Battery Chemistry With H+ and Zn2+ Coinsertion
Sun, W., Wang, F., Hou, S., Yang, C., Fan, X., Ma, Z., Gao, T., Han, F., Hu, R., Zhu, M., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b04471 · Cited by 1,897
Albertus, P., Babinec, S., Litzelman, S., & Newman, A. (2017) · Nature Energy · doi:10.1038/s41560-017-0047-2 · Cited by 1,888
An Outlook on Lithium Ion Battery Technology
Manthiram, A. (2017) · ACS Central Science · doi:10.1021/acscentsci.7b00288 · Cited by 1,771
Energy applications of ionic liquids
MacFarlane, D. R., Tachikawa, N., Forsyth, M., Pringle, J. M., Howlett, P. C., Elliott, G. D., Davis, J. H., Watanabe, M., Simon, P., & Angell, C. A. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42099j · Cited by 1,745
Review on modeling of the anode solid electrolyte interphase (SEI) for lithium-ion batteries
Wang, A., Kadam, S., Li, H., Shi, S., & Qi, Y. (2018) · npj Computational Materials · doi:10.1038/s41524-018-0064-0 · Cited by 1,639
A Novel Aluminum–Graphite Dual‐Ion Battery
Zhang, X., Tang, Y., Zhang, F., & Lee, C. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502588 · Cited by 1,604
Synthesis, Properties, and Applications of Hollow Micro-/Nanostructures
Wang, X., Feng, J., Bai, Y., Zhang, Q., & Yin, Y. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00731 · Cited by 1,456
Solution Combustion Synthesis of Nanoscale Materials
Varma, A., Mukasyan, A. S., Rogachev, A. S., & Manukyan, K. V. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00279 · Cited by 1,453
High‐Energy Lithium‐Ion Batteries: Recent Progress and a Promising Future in Applications
Xu, J., Cai, X., Cai, S., Shao, Y., Hu, C., Lu, S., & Ding, S. (2023) · ENERGY & ENVIRONMENTAL MATERIALS · doi:10.1002/eem2.12450 · Cited by 1,201
Understanding electrochemical potentials of cathode materials in rechargeable batteries
Liu, C., Neale, Z. G., & Cao, G. (2016) · Materials Today · doi:10.1016/j.mattod.2015.10.009 · Cited by 1,156
Islam, M. S., & Fisher, C. A. J. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60199d · Cited by 1,079
Prediction and Characterization of MXene Nanosheet Anodes for Non-Lithium-Ion Batteries
Xie, Y., Dall’Agnese, Y., Naguib, M., Gogotsi, Y., Barsoum, M. W., Zhuang, H. L., & Kent, P. R. C. (2014) · ACS Nano · doi:10.1021/nn503921j · Cited by 1,046
All solid-state polymer electrolytes for high-performance lithium ion batteries
Yue, L., Ma, J., Zhang, J., Zhao, J., Dong, S., Liu, Z., Cui, G., & Chen, L. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2016.07.003 · Cited by 1,020
Gel Polymer Electrolytes for Electrochemical Energy Storage
Cheng, X., Pan, J., Zhao, Y., Liao, M., & Peng, H. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702184 · Cited by 1,020
Defect Engineering on Electrode Materials for Rechargeable Batteries
Zhang, Y., Tao, L., Xie, C., Wang, D., Zou, Y., Chen, R., Wang, Y., Jia, C., & Wang, S. (2020) · Advanced Materials · doi:10.1002/adma.201905923 · Cited by 1,019
Rational material design for ultrafast rechargeable lithium-ion batteries
Tang, Y., Zhang, Y., Li, W., Ma, B., & Chen, X. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00442f · Cited by 987
Chen, H., Ling, M., Hencz, L., Ling, H. Y., Li, G., Lin, Z., Liu, G., & Zhang, S. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00241 · Cited by 958
Biomass-derived carbon: synthesis and applications in energy storage and conversion
Deng, J., Li, M., & Wang, Y. (2016) · Green Chemistry · doi:10.1039/c6gc01172a · Cited by 956
Understanding the Anchoring Effect of Two-Dimensional Layered Materials for Lithium–Sulfur Batteries
Zhang, Q., Wang, Y., Seh, Z. W., Fu, Z., Zhang, R., & Cui, Y. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00367 · Cited by 931
Li, H., Han, C., Huang, Y., Huang, Y., Zhu, M., Pei, Z., Xue, Q., Wang, Z., Liu, Z., Tang, Z., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03232c · Cited by 931
Smart Textiles for Electricity Generation
Chen, G., Li, Y., Bick, M., & Chen, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00821 · Cited by 931
An Overview on the Advances of LiCoO2 Cathodes for Lithium‐Ion Batteries
Lyu, Y., Wu, X., Wang, K., Feng, Z., Cheng, T., Liu, Y., Wang, M., Chen, R., Xu, L., Zhou, J., et al. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000982 · Cited by 890
Reversible planar gliding and microcracking in a single-crystalline Ni-rich cathode
Bi, Y., Tao, J., Wu, Y., Li, L., Xu, Y., Hu, E., Wu, B., Hu, J., Wang, C., Zhang, J.-G., et al. (2020) · Science · doi:10.1126/science.abc3167 · Cited by 889
Electrode Degradation in Lithium-Ion Batteries
Pender, J. P., Jha, G., Youn, D. H., Ziegler, J. M., Andoni, I., Choi, E. J., Heller, A., Dunn, B. S., Weiss, P. S., Penner, R. M., et al. (2020) · ACS Nano · doi:10.1021/acsnano.9b04365 · Cited by 873
Advances in Lithium–Sulfur Batteries: From Academic Research to Commercial Viability
Chen, Y., Wang, T., Tian, H., Su, D., Zhang, Q., & Wang, G. (2021) · Advanced Materials · doi:10.1002/adma.202003666 · Cited by 870
Phosphorus-Based Alloy Materials for Advanced Potassium-Ion Battery Anode
Zhang, W., Mao, J., Li, S., Chen, Z., & Guo, Z. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b12185 · Cited by 831
Recycling of spent lithium-ion batteries in view of lithium recovery: A critical review
Liu, C., Lin, J., Cao, H., Zhang, Y., & Sun, Z. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.04.304 · Cited by 789
Sodium‐Ion Batteries: From Academic Research to Practical Commercialization
Deng, J., Luo, W., Chou, S., Liu, H., & Dou, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701428 · Cited by 770
Kraft, M. A., Culver, S. P., Calderon, M., Böcher, F., Krauskopf, T., Senyshyn, A., Dietrich, C., Zevalkink, A., Janek, J., & Zeier, W. G. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b06327 · Cited by 760
Anode‐Free Rechargeable Lithium Metal Batteries
Qian, J., Adams, B. D., Zheng, J., Xu, W., Henderson, W. A., Wang, J., Bowden, M. E., Xu, S., Hu, J., & Zhang, J. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602353 · Cited by 746
Guan, B. Y., Yu, X. Y., Wu, H. B., & Lou, X. W. (. (2017) · Advanced Materials · doi:10.1002/adma.201703614 · Cited by 733
Electrochemical potential window of battery electrolytes: the HOMO–LUMO misconception
Peljo, P., & Girault, H. H. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01286e · Cited by 708
Eames, C., & Islam, M. S. (2014) · Journal of the American Chemical Society · doi:10.1021/ja508154e · Cited by 688
Pyrite FeS2for high-rate and long-life rechargeable sodium batteries
Hu, Z., Zhu, Z., Cheng, F., Zhang, K., Wang, J., Chen, C., & Chen, J. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03759f · Cited by 686
Free-Standing Copper Nanowire Network Current Collector for Improving Lithium Anode Performance
Lu, L.-L., Ge, J., Yang, J.-N., Chen, S.-M., Yao, H.-B., Zhou, F., & Yu, S.-H. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b01581 · Cited by 678
Dong, Y., Wu, Z.-S., Zheng, S., Wang, X., Qin, J., Wang, S., Shi, X., & Bao, X. (2017) · ACS Nano · doi:10.1021/acsnano.7b01165 · Cited by 656
Electrode–electrolyte interfaces in lithium-based batteries
Yu, X., & Manthiram, A. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02555f · Cited by 649
A High‐Energy Room‐Temperature Sodium‐Sulfur Battery
Xin, S., Yin, Y., Guo, Y., & Wan, L. (2014) · Advanced Materials · doi:10.1002/adma.201304126 · Cited by 632
MXene: an emerging two-dimensional material for future energy conversion and storage applications
Chaudhari, N. K., Jin, H., Kim, B., San Baek, D., Joo, S. H., & Lee, K. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta09094c · Cited by 630
Covalent–Organic Frameworks: Advanced Organic Electrode Materials for Rechargeable Batteries
Sun, T., Xie, J., Guo, W., Li, D., & Zhang, Q. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201904199 · Cited by 622
Ionic liquids and derived materials for lithium and sodium batteries
Yang, Q., Zhang, Z., Sun, X.-G., Hu, Y.-S., Xing, H., & Dai, S. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00464h · Cited by 601
Seh, Z. W., Yu, J. H., Li, W., Hsu, P.-C., Wang, H., Sun, Y., Yao, H., Zhang, Q., & Cui, Y. (2014) · Nature Communications · doi:10.1038/ncomms6017 · Cited by 600
Exploring competitive features of stationary sodium ion batteries for electrochemical energy storage
Liu, T., Zhang, Y., Jiang, Z., Zeng, X., Ji, J., Li, Z., Gao, X., Sun, M., Lin, Z., Ling, M., et al. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03727b · Cited by 592
Huang, S., Li, Z., Wang, B., Zhang, J., Peng, Z., Qi, R., Wang, J., & Zhao, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706294 · Cited by 585
Recent Progress on Zn Anodes for Advanced Aqueous Zinc‐Ion Batteries
Nie, C., Wang, G., Wang, D., Wang, M., Gao, X., Bai, Z., Wang, N., Yang, J., Xing, Z., & Dou, S. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202300606 · Cited by 561
Clément, R. J., Lun, Z., & Ceder, G. (2020) · Energy & Environmental Science · doi:10.1039/c9ee02803j · Cited by 560
Multifunctional Energy Storage and Conversion Devices
Huang, Y., Zhu, M., Huang, Y., Pei, Z., Li, H., Wang, Z., Xue, Q., & Zhi, C. (2016) · Advanced Materials · doi:10.1002/adma.201601928 · Cited by 544
Oxygen Release Degradation in Li‐Ion Battery Cathode Materials: Mechanisms and Mitigating Approaches
Sharifi‐Asl, S., Lu, J., Amine, K., & Shahbazian‐Yassar, R. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900551 · Cited by 532
Exploring Anomalous Charge Storage in Anode Materials for Next-Generation Li Rechargeable Batteries
Kim, H., Choi, W., Yoon, J., Um, J. H., Lee, W., Kim, J., Cabana, J., & Yoon, W.-S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00618 · Cited by 527
Carbon as catalyst and support for electrochemical energy conversion
Trogadas, P., Fuller, T. F., & Strasser, P. (2014) · Carbon · doi:10.1016/j.carbon.2014.04.005 · Cited by 522
Wu, K., Huang, J., Yi, J., Liu, X., Liu, Y., Wang, Y., Zhang, J., & Xia, Y. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903977 · Cited by 522
Black Phosphorus Rediscovered: From Bulk Material to Monolayers
Gusmão, R., Sofer, Z., & Pumera, M. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201610512 · Cited by 521
Applications of Phosphorene and Black Phosphorus in Energy Conversion and Storage Devices
Pang, J., Bachmatiuk, A., Yin, Y., Trzebicka, B., Zhao, L., Fu, L., Mendes, R. G., Gemming, T., Liu, Z., & Rummeli, M. H. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702093 · Cited by 518
Challenges and advances in wide-temperature rechargeable lithium batteries
Feng, Y., Zhou, L., Ma, H., Wu, Z., Zhao, Q., Li, H., Zhang, K., & Chen, J. (2022) · Energy & Environmental Science · doi:10.1039/d1ee03292e · Cited by 517
Exploring metal organic frameworks for energy storage in batteries and supercapacitors
Xu, G., Nie, P., Dou, H., Ding, B., Li, L., & Zhang, X. (2017) · Materials Today · doi:10.1016/j.mattod.2016.10.003 · Cited by 512
Progress in Mechanistic Understanding and Characterization Techniques of Li‐S Batteries
Xu, R., Lu, J., & Amine, K. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500408 · Cited by 507
Indra, A., Song, T., & Paik, U. (2018) · Advanced Materials · doi:10.1002/adma.201705146 · Cited by 507
Anodes for Rechargeable Lithium‐Sulfur Batteries
Cao, R., Xu, W., Lv, D., Xiao, J., & Zhang, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402273 · Cited by 502
Perspectives for Polymer Electrolytes: A View from Fundamentals of Ionic Conductivity
Bocharova, V., & Sokolov, A. P. (2020) · Macromolecules · doi:10.1021/acs.macromol.9b02742 · Cited by 499
Phosphorene and Phosphorene‐Based Materials – Prospects for Future Applications
Batmunkh, M., Bat‐Erdene, M., & Shapter, J. G. (2016) · Advanced Materials · doi:10.1002/adma.201602254 · Cited by 494
Zhai, H., Xu, P., Ning, M., Cheng, Q., Mandal, J., & Yang, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b00715 · Cited by 490
Dendrite-Free Li-Metal Battery Enabled by a Thin Asymmetric Solid Electrolyte with Engineered Layers
Duan, H., Yin, Y.-X., Shi, Y., Wang, P.-F., Zhang, X.-D., Yang, C.-P., Shi, J.-L., Wen, R., Guo, Y.-G., & Wan, L.-J. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b10864 · Cited by 482
MoS2‐Based Nanocomposites for Electrochemical Energy Storage
Wang, T., Chen, S., Pang, H., Xue, H., & Yu, Y. (2017) · Advanced Science · doi:10.1002/advs.201600289 · Cited by 481
Reverse Dual-Ion Battery via a ZnCl2 Water-in-Salt Electrolyte
Wu, X., Xu, Y., Zhang, C., Leonard, D. P., Markir, A., Lu, J., & Ji, X. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b00617 · Cited by 481
Scalable and safe synthetic organic electroreduction inspired by Li-ion battery chemistry
Peters, B. K., Rodriguez, K. X., Reisberg, S. H., Beil, S. B., Hickey, D. P., Kawamata, Y., Collins, M., Starr, J., Chen, L., Udyavara, S., et al. (2019) · Science · doi:10.1126/science.aav5606 · Cited by 478
Understanding undesirable anode lithium plating issues in lithium-ion batteries
Liu, Q., Du, C., Shen, B., Zuo, P., Cheng, X., Ma, Y., Yin, G., & Gao, Y. (2016) · RSC Advances · doi:10.1039/c6ra19482f · Cited by 473
Zhang, J.-N., Li, Q., Wang, Y., Zheng, J., Yu, X., & Li, H. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.02.016 · Cited by 473
A cyclic phosphate-based battery electrolyte for high voltage and safe operation
Zheng, Q., Yamada, Y., Shang, R., Ko, S., Lee, Y.-Y., Kim, K., Nakamura, E., & Yamada, A. (2020) · Nature Energy · doi:10.1038/s41560-020-0567-z · Cited by 469
Duan, H., Fan, M., Chen, W., Li, J., Wang, P., Wang, W., Shi, J., Yin, Y., Wan, L., & Guo, Y. (2019) · Advanced Materials · doi:10.1002/adma.201807789 · Cited by 466
Lin, D., Liu, Y., Chen, W., Zhou, G., Liu, K., Dunn, B., & Cui, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b01020 · Cited by 465
Research Progress on Negative Electrodes for Practical Li‐Ion Batteries: Beyond Carbonaceous Anodes
Aravindan, V., Lee, Y., & Madhavi, S. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402225 · Cited by 462
An Advanced Lithium-Ion Battery Based on a Graphene Anode and a Lithium Iron Phosphate Cathode
Hassoun, J., Bonaccorso, F., Agostini, M., Angelucci, M., Betti, M. G., Cingolani, R., Gemmi, M., Mariani, C., Panero, S., Pellegrini, V., et al. (2014) · Nano Letters · doi:10.1021/nl502429m · Cited by 461
Zeng, X.-X., Yin, Y.-X., Li, N.-W., Du, W.-C., Guo, Y.-G., & Wan, L.-J. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b10088 · Cited by 459
Zhao, Y., Ding, Y., Li, Y., Peng, L., Byon, H. R., Goodenough, J. B., & Yu, G. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00289c · Cited by 458
Self-citationAluminium-ion batteries: developments and challenges
Das, S. K., Mahapatra, S., & Lahan, H. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00228a · Cited by 458
Kuznetsov, D. A., Han, B., Yu, Y., Rao, R. R., Hwang, J., Román-Leshkov, Y., & Shao-Horn, Y. (2018) · Joule · doi:10.1016/j.joule.2017.11.014 · Cited by 452
Structural Engineering of 2D Nanomaterials for Energy Storage and Catalysis
Zhu, Y., Peng, L., Fang, Z., Yan, C., Zhang, X., & Yu, G. (2018) · Advanced Materials · doi:10.1002/adma.201706347 · Cited by 451
Advanced Materials for Printed Wearable Electrochemical Devices: A Review
Kim, J., Kumar, R., Bandodkar, A. J., & Wang, J. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201600260 · Cited by 452
Huang, J., Xie, Y., You, Y., Yuan, J., Xu, Q., Xie, H., & Chen, Y. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202213095 · Cited by 448
Wu, J., Liang, Q., Yu, X., Lü, Q., Ma, L., Qin, X., Chen, G., & Li, B. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202011102 · Cited by 447
Hollow Carbon-Nanotube/Carbon-Nanofiber Hybrid Anodes for Li-Ion Batteries
Chen, Y., Li, X., Park, K., Song, J., Hong, J., Zhou, L., Mai, Y.-W., Huang, H., & Goodenough, J. B. (2013) · Journal of the American Chemical Society · doi:10.1021/ja408421n · Cited by 444
Self-citationNanowires for Electrochemical Energy Storage
Zhou, G., Xu, L., Hu, G., Mai, L., & Cui, Y. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00326 · Cited by 439
Achievements, Challenges, and Prospects of Calcium Batteries
Arroyo-de Dompablo, M. E., Ponrouch, A., Johansson, P., & Palacín, M. R. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00339 · Cited by 429
Small things make a big difference: binder effects on the performance of Li and Na batteries
Chou, S.-L., Pan, Y., Wang, J.-Z., Liu, H.-K., & Dou, S.-X. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp02475c · Cited by 428
Leng, J., Wang, Z., Wang, J., Wu, H.-H., Yan, G., Li, X., Guo, H., Liu, Y., Zhang, Q., & Guo, Z. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00904j · Cited by 425
Critical Challenges in Rechargeable Aprotic Li–O2 Batteries
Feng, N., He, P., & Zhou, H. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502303 · Cited by 423
Tang, Y., Zhang, Y., Deng, J., Wei, J., Tam, H. L., Chandran, B. K., Dong, Z., Chen, Z., & Chen, X. (2014) · Advanced Materials · doi:10.1002/adma.201402000 · Cited by 422
Samadi, M., Sarikhani, N., Zirak, M., Zhang, H., Zhang, H.-L., & Moshfegh, A. Z. (2018) · Nanoscale Horizons · doi:10.1039/c7nh00137a · Cited by 408
Maleki Kheimeh Sari, H., & Li, X. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901597 · Cited by 403
Li, H., Wu, D., Wu, J., Dong, L., Zhu, Y., & Hu, X. (2017) · Advanced Materials · doi:10.1002/adma.201703548 · Cited by 401
Solution combustion synthesis of metal oxide nanomaterials for energy storage and conversion
Li, F.-T., Ran, J., Jaroniec, M., & Qiao, S. Z. (2015) · Nanoscale · doi:10.1039/c5nr05299h · Cited by 400
Metadata
- Authors
- Goodenough, J. B., & Park, K.-S.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-01-18
- Volume
- 135
- Issue
- 4
- Pages
- 1167-1176
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2021172010
- Cited by
- 9,962
- References
- 40
- FWCI
- 244.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.