The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Enhanced Photovoltaic Performance of CH3NH3PbI3Perovskite Solar Cells through Interfacial Engineering Using Self-Assembling Monolayer
Abstract
Morphology control is critical to achieve high efficiency CH3NH3PbI3 perovskite solar cells (PSC). The surface properties of the substrates on which crystalline perovskite thin films form are expected to affect greatly the crystallization and, thus, the resulting morphology. However, this topic is seldom examined in PSC. Here we developed a facile but efficient method of modifying the ZnO-coated substrates with 3-aminopropanioc acid (C3-SAM) to direct the crystalline evolution and achieve the optimal morphology of CH3NH3PbI3 perovskite film. With incorporation of the C3-SAM, highly crystalline CH3NH3PbI3 films were formed with reduced pin-holes and trap states density. In addition, the work function of the cathode was better aligned with the conduction band minimum of perovskite for efficient charge extraction and electronic coupling. As a result, the PSC performance remarkably increased from 9.81(±0.99)% (best 11.96%) to 14.25(±0.61)% (best 15.67%). We stress the importance of morphology control through substrate surface modification to obtain the optimal morphology and device performance of PSC, which should generate an impact on developing highly efficient PSC and future commercialization.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
The emergence of perovskite solar cells
Green, M. A., Ho-Baillie, A., & Snaith, H. J. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.134 · Cited by 7,432
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Liu, D., & Kelly, T. L. (2014) · Nature Photonics · doi:10.1038/nphoton.2013.342 · Cited by 2,663
Cited by
Self-assembled monolayers direct a LiF-rich interphase toward long-life lithium metal batteries
Liu, Y., Tao, X., Wang, Y., Jiang, C., Ma, C., Sheng, O., Lu, G., & Lou, X. W. (. (2022) · Science · doi:10.1126/science.abn1818 · Cited by 962
SnO2: A Wonderful Electron Transport Layer for Perovskite Solar Cells
Jiang, Q., Zhang, X., & You, J. (2018) · Small · doi:10.1002/smll.201801154 · Cited by 924
Polymer-modified halide perovskite films for efficient and stable planar heterojunction solar cells
Zuo, L., Guo, H., deQuilettes, D. W., Jariwala, S., De Marco, N., Dong, S., DeBlock, R., Ginger, D. S., Dunn, B., Wang, M., et al. (2017) · Science Advances · doi:10.1126/sciadv.1700106 · Cited by 749
Self-citationCauses and Solutions of Recombination in Perovskite Solar Cells
Chen, J., & Park, N. (2019) · Advanced Materials · doi:10.1002/adma.201803019 · Cited by 733
Defect and Contact Passivation for Perovskite Solar Cells
Aydin, E., De Bastiani, M., & De Wolf, S. (2019) · Advanced Materials · doi:10.1002/adma.201900428 · Cited by 681
Review on the Application of SnO2 in Perovskite Solar Cells
Xiong, L., Guo, Y., Wen, J., Liu, H., Yang, G., Qin, P., & Fang, G. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201802757 · Cited by 653
Guan, S., Li, Y., Xu, C., Yin, N., Xu, C., Wang, C., Wang, M., Xu, Y., Chen, Q., Wang, D., et al. (2024) · Advanced Materials · doi:10.1002/adma.202400342 · Cited by 650
Self-citationLi, M., Liu, M., Qi, F., Lin, F. R., & Jen, A. K.-Y. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00396 · Cited by 642
Recent progress in electron transport layers for efficient perovskite solar cells
Yang, G., Tao, H., Qin, P., Ke, W., & Fang, G. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09011c · Cited by 579
Defects engineering for high-performance perovskite solar cells
Wang, F., Bai, S., Tress, W., Hagfeldt, A., & Gao, F. (2018) · npj Flexible Electronics · doi:10.1038/s41528-018-0035-z · Cited by 568
Yoo, E. J., Lyu, M., Yun, J., Kang, C. J., Choi, Y. J., & Wang, L. (2015) · Advanced Materials · doi:10.1002/adma.201502889 · Cited by 567
Multifunctional Fullerene Derivative for Interface Engineering in Perovskite Solar Cells
Li, Y., Zhao, Y., Chen, Q., Yang, Y. (., Liu, Y., Hong, Z., Liu, Z., Hsieh, Y.-T., Meng, L., Li, Y., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b10614 · Cited by 539
Chen, J., Zhao, X., Kim, S., & Park, N. (2019) · Advanced Materials · doi:10.1002/adma.201902902 · Cited by 527
Materials and Methods for Interface Engineering toward Stable and Efficient Perovskite Solar Cells
Chen, J., & Park, N.-G. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01240 · Cited by 521
Planar heterojunction organometal halide perovskite solar cells: roles of interfacial layers
Kim, H., Lim, K.-G., & Lee, T.-W. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02194d · Cited by 507
Zhu, Z., Bai, Y., Liu, X., Chueh, C., Yang, S., & Jen, A. K. ‐. (2016) · Advanced Materials · doi:10.1002/adma.201600619 · Cited by 499
Huang, C., Fu, W., Li, C.-Z., Zhang, Z., Qiu, W., Shi, M., Heremans, P., Jen, A. K.-Y., & Chen, H. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b00039 · Cited by 489
Self-citationRecent advances in perovskite solar cells: efficiency, stability and lead-free perovskite
Yang, S., Fu, W., Zhang, Z., Chen, H., & Li, C.-Z. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00366h · Cited by 486
Self-citationThe Role of the Interfaces in Perovskite Solar Cells
Shao, S., & Loi, M. A. (2020) · Advanced Materials Interfaces · doi:10.1002/admi.201901469 · Cited by 477
Defect passivation strategies in perovskites for an enhanced photovoltaic performance
Fu, L., Li, H., Wang, L., Yin, R., Li, B., & Yin, L. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01767a · Cited by 463
Self-citationPerovskite Solar Cells with ZnO Electron‐Transporting Materials
Zhang, P., Wu, J., Zhang, T., Wang, Y., Liu, D., Chen, H., Ji, L., Liu, C., Ahmad, W., Chen, Z. D., et al. (2018) · Advanced Materials · doi:10.1002/adma.201703737 · Cited by 450
Self-citationCao, J., Wu, B., Chen, R., Wu, Y., Hui, Y., Mao, B., & Zheng, N. (2018) · Advanced Materials · doi:10.1002/adma.201705596 · Cited by 447
Yang, G., Wang, C., Lei, H., Zheng, X., Qin, P., Xiong, L., Zhao, X., Yan, Y., & Fang, G. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta08783c · Cited by 437
Rajagopal, A., Yao, K., & Jen, A. K. ‐. (2018) · Advanced Materials · doi:10.1002/adma.201800455 · Cited by 429
ZnO nanostructured materials for emerging solar cell applications
Wibowo, A., Marsudi, M. A., Amal, M. I., Ananda, M. B., Stephanie, R., Ardy, H., & Diguna, L. J. (2020) · RSC Advances · doi:10.1039/d0ra07689a · Cited by 417
Self‐Assembled Monolayers as Interface Engineering Nanomaterials in Perovskite Solar Cells
Kim, S. Y., Cho, S. J., Byeon, S. E., He, X., & Yoon, H. J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002606 · Cited by 404
Interfacial Dipole in Organic and Perovskite Solar Cells
Chen, Q., Wang, C., Li, Y., & Chen, L. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c07439 · Cited by 397
Long, R., Liu, J., & Prezhdo, O. V. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b00645 · Cited by 395
Zhang, X., Wu, G., Fu, W., Qin, M., Yang, W., Yan, J., Zhang, Z., Lu, X., & Chen, H. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702498 · Cited by 390
Self-citationKuang, C., Tang, G., Jiu, T., Yang, H., Liu, H., Li, B., Luo, W., Li, X., Zhang, W., Lu, F., et al. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00787 · Cited by 376
Tailoring the Interfacial Chemical Interaction for High-Efficiency Perovskite Solar Cells
Zuo, L., Chen, Q., De Marco, N., Hsieh, Y.-T., Chen, H., Sun, P., Chang, S.-Y., Zhao, H., Dong, S., & Yang, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04015 · Cited by 373
Self-citationBai, Y., Chen, H., Xiao, S., Xue, Q., Zhang, T., Zhu, Z., Li, Q., Hu, C., Yang, Y., Hu, Z., et al. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201505215 · Cited by 351
Self-citationChen, H., Wei, Z., He, H., Zheng, X., Wong, K. S., & Yang, S. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502087 · Cited by 348
Self-citationZhang, M., Chen, Q., Xue, R., Zhan, Y., Wang, C., Lai, J., Yang, J., Lin, H., Yao, J., Li, Y., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-12613-8 · Cited by 330
Cao, J., Jing, X., Yan, J., Hu, C., Chen, R., Yin, J., Li, J., & Zheng, N. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b04924 · Cited by 320
Han, J., Park, K., Tan, S., Vaynzof, Y., Xue, J., Diau, E. W.-G., Bawendi, M. G., Lee, J.-W., & Jeon, I. (2025) · Nature Reviews Methods Primers · doi:10.1038/s43586-024-00373-9 · Cited by 304
Chen, J., Seo, J., & Park, N. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702714 · Cited by 299
Ali, F., Roldán‐Carmona, C., Sohail, M., & Nazeeruddin, M. K. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002989 · Cited by 296
Metal Oxide Charge Transport Layers for Efficient and Stable Perovskite Solar Cells
Shin, S. S., Lee, S. J., & Seok, S. I. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900455 · Cited by 283
Impact of Interfacial Layers in Perovskite Solar Cells
Cho, A., & Park, N. (2017) · ChemSusChem · doi:10.1002/cssc.201701095 · Cited by 281
Zhang, H., Nazeeruddin, M. K., & Choy, W. C. H. (2019) · Advanced Materials · doi:10.1002/adma.201805702 · Cited by 275
Buried Interface Modification in Perovskite Solar Cells: A Materials Perspective
Gao, Z., Wang, Y., & Choy, W. C. H. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202104030 · Cited by 271
Chemical Pathways Connecting Lead(II) Iodide and Perovskite via Polymeric Plumbate(II) Fiber
Guo, Y., Shoyama, K., Sato, W., Matsuo, Y., Inoue, K., Harano, K., Liu, C., Tanaka, H., & Nakamura, E. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b10599 · Cited by 264
Solution-Processed Transparent Electrodes for Emerging Thin-Film Solar Cells
Zhang, Y., Ng, S.-W., Lu, X., & Zheng, Z. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00483 · Cited by 264
Cao, J., Liu, Y.-M., Jing, X., Yin, J., Li, J., Xu, B., Tan, Y.-Z., & Zheng, N. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06493 · Cited by 263
Fullerene derivative anchored SnO2 for high-performance perovskite solar cells
Liu, K., Chen, S., Wu, J., Zhang, H., Qin, M., Lu, X., Tu, Y., Meng, Q., & Zhan, X. (2018) · Energy & Environmental Science · doi:10.1039/c8ee02172d · Cited by 261
Mechanisms and Suppression of Photoinduced Degradation in Perovskite Solar Cells
Wei, J., Wang, Q., Huo, J., Gao, F., Gan, Z., Zhao, Q., & Li, H. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202002326 · Cited by 260
Self-citationVertically Oriented 2D Layered Perovskite Solar Cells with Enhanced Efficiency and Good Stability
Zhang, X., Wu, G., Yang, S., Fu, W., Zhang, Z., Chen, C., Liu, W., Yan, J., Yang, W., & Chen, H. (2017) · Small · doi:10.1002/smll.201700611 · Cited by 256
Self-citationChen, J., Kim, S., & Park, N. (2018) · Advanced Materials · doi:10.1002/adma.201801948 · Cited by 254
Wang, Q., Chueh, C., Zhao, T., Cheng, J., Eslamian, M., Choy, W. C. H., & Jen, A. K. ‐. (2017) · ChemSusChem · doi:10.1002/cssc.201701262 · Cited by 253
Mahmood, K., Swain, B. S., & Amassian, A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500568 · Cited by 252
Metadata
- Authors
- Zuo, L., Gu, Z., Ye, T., Fu, W., Wu, G., Li, H., & Chen, H.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-02-13
- Volume
- 137
- Issue
- 7
- Pages
- 2674-2679
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2328692830
- Cited by
- 676
- References
- 44
- FWCI
- 45.23
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.