The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Synthetic Control of the Pore Dimension and Surface Area in Conjugated Microporous Polymer and Copolymer Networks
Abstract
A series of rigid microporous poly(aryleneethynylene) (PAE) networks was synthesized by Sonogashira-Hagihara coupling chemistry. PAEs with apparent Brunauer-Emmet-Teller surface areas of more than 1000 m(2)/g were produced. The materials were found to have very good chemical and thermal stability and retention of microporosity under a variety of conditions. It was shown that physical properties such as micropore size, surface area, and hydrogen uptake could be controlled in a "quantized" fashion by varying the monomer strut length, as for metal-organic and covalent organic frameworks, even though the networks were amorphous in nature. For the first time, it was demonstrated that these properties can also be fine-tuned in a continuous manner via statistical copolymerization of monomer struts with differing lengths. This provides an unprecedented degree of direct synthetic control over micropore properties in an organic network.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
Cited by
Design and Preparation of Porous Polymers
Wu, D., Xu, F., Sun, B., Fu, R., He, H., & Matyjaszewski, K. (2012) · Chemical Reviews · doi:10.1021/cr200440z · Cited by 1,748
Hypercrosslinked porous polymer materials: design, synthesis, and applications
Tan, L., & Tan, B. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00851h · Cited by 1,357
Porous Organic Materials: Strategic Design and Structure–Function Correlation
Das, S., Heasman, P., Ben, T., & Qiu, S. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00439 · Cited by 1,286
Acetylenic Polymers: Syntheses, Structures, and Functions
Liu, J., Lam, J. W. Y., & Tang, B. Z. (2009) · Chemical Reviews · doi:10.1021/cr900149d · Cited by 1,196
Nanoporous organic polymer networks
Dawson, R., Cooper, A. I., & Adams, D. J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.09.002 · Cited by 1,114
Self-citationWang, H., Zeng, Z., Xu, P., Li, L., Zeng, G., Xiao, R., Tang, Z., Huang, D., Tang, L., Lai, C., et al. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00376a · Cited by 804
Functional Materials: From Hard to Soft Porous Frameworks
Thomas, A. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201000167 · Cited by 780
Yu, X., Tang, Z., Sun, D., Ouyang, L., & Zhu, M. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.03.001 · Cited by 716
Microporous Polycarbazole with High Specific Surface Area for Gas Storage and Separation
Chen, Q., Luo, M., Hammershøj, P., Zhou, D., Han, Y., Laursen, B. W., Yan, C.-G., & Han, B.-H. (2012) · Journal of the American Chemical Society · doi:10.1021/ja300438w · Cited by 704
Li, B., Gong, R., Wang, W., Huang, X., Zhang, W., Li, H., Hu, C., & Tan, B. (2011) · Macromolecules · doi:10.1021/ma200630s · Cited by 632
Iodine capture in porous organic polymers and metal–organic frameworks materials
Xie, W., Cui, D., Zhang, S.-R., Xu, Y.-H., & Jiang, D.-L. (2019) · Materials Horizons · doi:10.1039/c8mh01656a · Cited by 622
Superhydrophobic conjugated microporous polymers for separation and adsorption
Li, A., Sun, H.-X., Tan, D.-Z., Fan, W.-J., Wen, S.-H., Qing, X.-J., Li, G.-X., Li, S.-Y., & Deng, W.-Q. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01092a · Cited by 601
Microporous organic polymers for carbon dioxide capture
Dawson, R., Stöckel, E., Holst, J. R., Adams, D. J., & Cooper, A. I. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01971f · Cited by 590
Self-citationPorous Polymer Networks: Synthesis, Porosity, and Applications in Gas Storage/Separation
Lu, W., Yuan, D., Zhao, D., Schilling, C. I., Plietzsch, O., Muller, T., Bräse, S., Guenther, J., Blümel, J., Krishna, R., et al. (2010) · Chemistry of Materials · doi:10.1021/cm1021068 · Cited by 577
Porous Polymers as Multifunctional Material Platforms toward Task‐Specific Applications
Wu, J., Xu, F., Li, S., Ma, P., Zhang, X., Liu, Q., Fu, R., & Wu, D. (2019) · Advanced Materials · doi:10.1002/adma.201802922 · Cited by 555
Recent advances in nanomaterials for water protection and monitoring
Das, R., Vecitis, C. D., Schulze, A., Cao, B., Ismail, A. F., Lu, X., Chen, J., & Ramakrishna, S. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00921b · Cited by 552
Rigid and microporous polymers for gas separation membranes
Kim, S., & Lee, Y. M. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.10.005 · Cited by 462
Nanoporous Polymers for Hydrogen Storage
Germain, J., Fréchet, J. M. J., & Svec, F. (2009) · Small · doi:10.1002/smll.200801762 · Cited by 432
Porous Organic Polymers for Post‐Combustion Carbon Capture
Zou, L., Sun, Y., Che, S., Yang, X., Wang, X., Bosch, M., Wang, Q., Li, H., Smith, M., Yuan, S., et al. (2017) · Advanced Materials · doi:10.1002/adma.201700229 · Cited by 432
A Salicylbisimine Cage Compound with High Surface Area and Selective CO2/CH4 Adsorption
Mastalerz, M., Schneider, M. W., Oppel, I. M., & Presly, O. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201005301 · Cited by 427
Conjugated porous polymers for energy applications
Vilela, F., Zhang, K., & Antonietti, M. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22002d · Cited by 422
Functionalized Conjugated Microporous Polymers
Dawson, R., Laybourn, A., Clowes, R., Khimyak, Y. Z., Adams, D. J., & Cooper, A. I. (2009) · Macromolecules · doi:10.1021/ma901801s · Cited by 375
Self-citationPorous covalent–organic materials: synthesis, clean energy application and design
Xiang, Z., & Cao, D. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00063f · Cited by 351
Harnessing Filler Materials for Enhancing Biogas Separation Membranes
Chuah, C. Y., Goh, K., Yang, Y., Gong, H., Li, W., Karahan, H. E., Guiver, M. D., Wang, R., & Bae, T.-H. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00091 · Cited by 339
Zhang, K., Kopetzki, D., Seeberger, P. H., Antonietti, M., & Vilela, F. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201207163 · Cited by 337
Metal–Organic Conjugated Microporous Polymers
Jiang, J., Wang, C., Laybourn, A., Hasell, T., Clowes, R., Khimyak, Y. Z., Xiao, J., Higgins, S. J., Adams, D. J., & Cooper, A. I. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201005864 · Cited by 334
Self-citationThomas, K. M. (2009) · Dalton Transactions · doi:10.1039/b815583f · Cited by 305
Gu, C., Huang, N., Gao, J., Xu, F., Xu, Y., & Jiang, D. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201402141 · Cited by 295
Chemical functionalization strategies for carbon dioxide capture in microporous organic polymers
Dawson, R., Cooper, A. I., & Adams, D. J. (2013) · Polymer International · doi:10.1002/pi.4407 · Cited by 284
Self-citationA Crystalline Polyimide Porous Organic Framework for Selective Adsorption of Acetylene over Ethylene
Jiang, L., Tian, Y., Sun, T., Zhu, Y., Ren, H., Zou, X., Ma, Y., Meihaus, K. R., Long, J. R., & Zhu, G. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b08174 · Cited by 282
Microporous Functionalized Triazine-Based Polyimides with High CO2 Capture Capacity
Liebl, M. R., & Senker, J. (2013) · Chemistry of Materials · doi:10.1021/cm4000894 · Cited by 269
Conjugated porous polymers: incredibly versatile materials with far-reaching applications
Taylor, D., Dalgarno, S. J., Xu, Z., & Vilela, F. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00315k · Cited by 259
Metadata
- Authors
- Jiang, J.-X., Su, F., Trewin, A., Wood, C. D., Niu, H., Jones, J. T. A., Khimyak, Y. Z., & Cooper, A. I.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-05-24
- Volume
- 130
- Issue
- 24
- Pages
- 7710-7720
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2058236705
- Cited by
- 879
- References
- 1
- FWCI
- 18.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.