The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Influence of Size on the Rate of Mesoporous Electrodes for Lithium Batteries
Abstract
High power rechargeable lithium batteries are a key target for transport and load leveling, in order to mitigate CO(2) emissions. It has already been demonstrated that mesoporous lithium intercalation compounds (composed of particles containing nanometer diameter pores separated by walls of similar size) can deliver high rate (power) and high stability on cycling. Here we investigate how the critical dimensions of pore size and wall thickness control the rate of intercalation (electrode reaction). By using mesoporous beta-MnO(2), the influence of these mesodimensions on lithium intercalation via single and two-phase intercalation processes has been studied in the same material enabling direct comparison. Pore size and wall thickness both influence the rate of single and two-phase intercalation mechanisms, but the latter is more sensitive than the former.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
Nanostructured materials for advanced energy conversion and storage devices
Aricò, A. S., Bruce, P., Scrosati, B., Tarascon, J.-M., & van Schalkwijk, W. (2005) · Nature Materials · doi:10.1038/nmat1368 · Cited by 8,826
Self-citationLithium Batteries and Cathode Materials
Whittingham, M. S. (2004) · Chemical Reviews · doi:10.1021/cr020731c · Cited by 6,267
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Nanomaterials for Rechargeable Lithium Batteries
Bruce, P. G., Scrosati, B., & Tarascon, J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702505 · Cited by 5,886
Self-citationBattery materials for ultrafast charging and discharging
Kang, B., & Ceder, G. (2009) · Nature · doi:10.1038/nature07853 · Cited by 3,480
Electronically conductive phospho-olivines as lithium storage electrodes
Chung, S.-Y., Bloking, J. T., & Chiang, Y.-M. (2002) · Nature Materials · doi:10.1038/nmat732 · Cited by 2,939
Taberna, P. L., Mitra, S., Poizot, P., Simon, P., & Tarascon, J.-M. (2006) · Nature Materials · doi:10.1038/nmat1672 · Cited by 2,010
A Neutral Templating Route to Mesoporous Molecular Sieves
Tanev, P. T., & Pinnavaia, T. J. (1995) · Science · doi:10.1126/science.267.5199.865 · Cited by 1,787
Kleitz, F., Hei Choi, S., & Ryoo, R. (2003) · Chemical Communications · doi:10.1039/b306504a · Cited by 1,455
Cited by
Xia, W., Mahmood, A., Zou, R., & Xu, Q. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00762c · Cited by 1,717
Functional Materials for Rechargeable Batteries
Cheng, F., Liang, J., Tao, Z., & Chen, J. (2011) · Advanced Materials · doi:10.1002/adma.201003587 · Cited by 1,609
Nanostructured metal oxide-based materials as advanced anodes for lithium-ion batteries
Wu, H. B., Chen, J. S., Hng, H. H., & Wen (David) Lou, X. (2012) · Nanoscale · doi:10.1039/c2nr11966h · Cited by 1,082
Alfaruqi, M. H., Mathew, V., Gim, J., Kim, S., Song, J., Baboo, J. P., Choi, S. H., & Kim, J. (2015) · Chemistry of Materials · doi:10.1021/cm504717p · Cited by 980
Ordered mesoporous metal oxides: synthesis and applications
Ren, Y., Ma, Z., & Bruce, P. G. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35086f · Cited by 768
Self-citationPorous electrode materials for lithium-ion batteries–how to prepare them and what makes them special
Vu, A., Qian, Y., & Stein, A. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200320 · Cited by 719
Nanowire Electrodes for Electrochemical Energy Storage Devices
Mai, L., Tian, X., Xu, X., Chang, L., & Xu, L. (2014) · Chemical Reviews · doi:10.1021/cr500177a · Cited by 700
Zhao, B., Ran, R., Liu, M., & Shao, Z. (2015) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2015.10.001 · Cited by 644
Mesoporous materials and electrochemistry
Walcarius, A. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35322a · Cited by 623
Synthesis of non-siliceous mesoporous oxides
Gu, D., & Schüth, F. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60155b · Cited by 584
Conversion Reaction‐Based Oxide Nanomaterials for Lithium Ion Battery Anodes
Yu, S., Lee, S. H., Lee, D. J., Sung, Y., & Hyeon, T. (2016) · Small · doi:10.1002/smll.201502299 · Cited by 499
Liu, H., Su, D., Zhou, R., Sun, B., Wang, G., & Qiao, S. Z. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200087 · Cited by 488
Li, J., Xiong, S., Li, X., & Qian, Y. (2013) · Nanoscale · doi:10.1039/c2nr33576j · Cited by 480
High “C” rate Li-S cathodes: sulfur imbibed bimodal porous carbons
He, G., Ji, X., & Nazar, L. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01219c · Cited by 475
Guo, J., Sun, A., Chen, X., Wang, C., & Manivannan, A. (2011) · Electrochimica Acta · doi:10.1016/j.electacta.2011.02.014 · Cited by 428
Holey two-dimensional transition metal oxide nanosheets for efficient energy storage
Peng, L., Xiong, P., Ma, L., Yuan, Y., Zhu, Y., Chen, D., Luo, X., Lu, J., Amine, K., & Yu, G. (2017) · Nature Communications · doi:10.1038/ncomms15139 · Cited by 425
Diffusion Mechanism of Lithium Ion through Basal Plane of Layered Graphene
Yao, F., Güneş, F., Ta, H. Q., Lee, S. M., Chae, S. J., Sheem, K. Y., Cojocaru, C. S., Xie, S. S., & Lee, Y. H. (2012) · Journal of the American Chemical Society · doi:10.1021/ja301586m · Cited by 401
Jayaramulu, K., Dubal, D. P., Nagar, B., Ranc, V., Tomanec, O., Petr, M., Datta, K. K. R., Zboril, R., Gómez‐Romero, P., & Fischer, R. A. (2018) · Advanced Materials · doi:10.1002/adma.201705789 · Cited by 394
Co3O4@graphene Composites as Anode Materials for High-Performance Lithium Ion Batteries
Li, B., Cao, H., Shao, J., Li, G., Qu, M., & Yin, G. (2011) · Inorganic Chemistry · doi:10.1021/ic1023086 · Cited by 374
Guo, B., Yu, X., Sun, X.-G., Chi, M., Qiao, Z.-A., Liu, J., Hu, Y.-S., Yang, X.-Q., Goodenough, J. B., & Dai, S. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00508b · Cited by 366
Lee, S. H., Yu, S.-H., Lee, J. E., Jin, A., Lee, D. J., Lee, N., Jo, H., Shin, K., Ahn, T.-Y., Kim, Y.-W., et al. (2013) · Nano Letters · doi:10.1021/nl401952h · Cited by 362
Revitalized interest in vanadium pentoxide as cathode material for lithium-ion batteries and beyond
Yao, J., Li, Y., Massé, R. C., Uchaker, E., & Cao, G. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.10.014 · Cited by 313
Mesoporous Prussian Blue Analogues: Template‐Free Synthesis and Sodium‐Ion Battery Applications
Yue, Y., Binder, A. J., Guo, B., Zhang, Z., Qiao, Z., Tian, C., & Dai, S. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201310679 · Cited by 296
Evaluating the performance of nanostructured materials as lithium-ion battery electrodes
Armstrong, M. J., O’Dwyer, C., Macklin, W. J., & Holmes, J. D. (2014) · Nano Research · doi:10.1007/s12274-013-0375-x · Cited by 285
Kang, E., Jung, Y. S., Kim, G., Chun, J., Wiesner, U., Dillon, A. C., Kim, J. K., & Lee, J. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201101123 · Cited by 276
Protocol for the Nanocasting Method: Preparation of Ordered Mesoporous Metal Oxides
Deng, X., Chen, K., & Tüysüz, H. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b02645 · Cited by 264
Metadata
- Authors
- Ren, Y., Armstrong, A. R., Jiao, F., & Bruce, P. G.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-12-29
- Volume
- 132
- Issue
- 3
- Pages
- 996-1004
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2010316566
- Cited by
- 282
- References
- 48
- FWCI
- 16.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.