The DOI matches its Crossref record; 54 of the 54 references it cites were found in a registry or an index.
Noninvasive In Situ NMR Study of “Dead Lithium” Formation and Lithium Corrosion in Full-Cell Lithium Metal Batteries
Open accessAbstract
Abstract Capacity retention in lithium metal batteries needs to be improved if they are to be commercially viable, the low cycling stability and Li corrosion during storage of lithium metal batteries being even more problematic when there is no excess lithium in the cell. Herein, we develop in situ NMR metrology to study “anode-free” lithium metal batteries where lithium is plated directly onto a bare copper current collector from a LiFePO4 cathode. The methodology allows inactive or “dead lithium” formation during plating and stripping of lithium in a full-cell lithium metal battery to be tracked: dead lithium and SEI formation can be quantified by NMR and their relative rates of formation are here compared in carbonate and ether-electrolytes. Little-to-no dead Li was observed when FEC is used as an additive. The bulk magnetic susceptibility effects arising from the paramagnetic lithium metal were used to distinguish between different surface coverages of lithium deposits. The amount of lithium metal was monitored during rest periods, and lithium metal dissolution (corrosion) was observed in all electrolytes, even during the periods when the battery is not in use, i.e., when no current is flowing, demonstrating that dissolution of lithium remains a critical issue for lithium metal batteries. The high rate of corrosion is attributed to SEI formation on both lithium metal and copper (and Cu+, Cu2+ reduction). Strategies to mitigate the corrosion are explored, the work demonstrating that both polymer coatings and the modification of the copper surface chemistry help to stabilize the lithium metal surface.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pathways for practical high-energy long-cycling lithium metal batteries
Liu, J., Bao, Z., Cui, Y., Dufek, E. J., Goodenough, J. B., Khalifah, P., Li, Q., Liaw, B. Y., Liu, P., Manthiram, A., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0338-x · Cited by 3,412
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Alloy Negative Electrodes for Li-Ion Batteries
Obrovac, M. N., & Chevrier, V. L. (2014) · Chemical Reviews · doi:10.1021/cr500207g · Cited by 2,175
Lin, D., Liu, Y., Liang, Z., Lee, H.-W., Sun, J., Wang, H., Yan, K., Xie, J., & Cui, Y. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.32 · Cited by 1,798
Nanoscale Nucleation and Growth of Electrodeposited Lithium Metal
Pei, A., Zheng, G., Shi, F., Li, Y., & Cui, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04755 · Cited by 1,726
Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries
Zhang, X., Cheng, X., Chen, X., Yan, C., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605989 · Cited by 1,699
Review on gel polymer electrolytes for lithium batteries
Manuel Stephan, A. (2006) · European Polymer Journal · doi:10.1016/j.eurpolymj.2005.09.017 · Cited by 1,422
Quantifying inactive lithium in lithium metal batteries
Fang, C., Li, J., Zhang, M., Zhang, Y., Yang, F., Lee, J. Z., Lee, M.-H., Alvarado, J., Schroeder, M. A., Yang, Y., et al. (2019) · Nature · doi:10.1038/s41586-019-1481-z · Cited by 1,413
Effect of Structure on the Fe3 + / Fe2 + Redox Couple in Iron Phosphates
Padhi, A. K., Nanjundaswamy, K. S., Masquelier, C., Okada, S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837649 · Cited by 1,295
A facile surface chemistry route to a stabilized lithium metal anode
Liang, X., Pang, Q., Kochetkov, I. R., Sempere, M. S., Huang, H., Sun, X., & Nazar, L. F. (2017) · Nature Energy · doi:10.1038/nenergy.2017.119 · Cited by 1,083
Cited by
Moving beyond 99.9% Coulombic efficiency for lithium anodes in liquid electrolytes
Hobold, G. M., Lopez, J., Guo, R., Minafra, N., Banerjee, A., Shirley Meng, Y., Shao-Horn, Y., & Gallant, B. M. (2021) · Nature Energy · doi:10.1038/s41560-021-00910-w · Cited by 547
Emerging electrolytes with fluorinated solvents for rechargeable lithium-based batteries
Wang, Y., Li, Z., Hou, Y., Hao, Z., Zhang, Q., Ni, Y., Lu, Y., Yan, Z., Zhang, K., Zhao, Q., et al. (2023) · Chemical Society Reviews · doi:10.1039/d2cs00873d · Cited by 390
Ding, J., Xu, R., Yao, N., Chen, X., Xiao, Y., Yao, Y., Yan, C., Xie, J., & Huang, J. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202101627 · Cited by 337
High entropy liquid electrolytes for lithium batteries
Wang, Q., Zhao, C., Wang, J., Yao, Z., Wang, S., Kumar, S. G. H., Ganapathy, S., Eustace, S., Bai, X., Li, B., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-36075-1 · Cited by 299
Anode‐Free Solid‐State Lithium Batteries: A Review
Huang, W., Zhao, C., Wu, P., Yuan, H., Feng, W., Liu, Z., Lu, Y., Sun, S., Fu, Z., Hu, J., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202201044 · Cited by 278
Wang, Y., Wang, T., Bu, S., Zhu, J., Wang, Y., Zhang, R., Hong, H., Zhang, W., Fan, J., & Zhi, C. (2023) · Nature Communications · doi:10.1038/s41467-023-37524-7 · Cited by 275
Dynamic spatial progression of isolated lithium during battery operations
Liu, F., Xu, R., Wu, Y., Boyle, D. T., Yang, A., Xu, J., Zhu, Y., Ye, Y., Yu, Z., Zhang, Z., et al. (2021) · Nature · doi:10.1038/s41586-021-04168-w · Cited by 267
Metadata
- Authors
- Gunnarsdóttir, A. B., Amanchukwu, C. V., Menkin, S., & Grey, C. P.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-11-23
- Volume
- 142
- Issue
- 49
- Pages
- 20814-20827
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W3107005462
- Cited by
- 326
- References
- 54
- FWCI
- 12.57
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.