The DOI matches its Crossref record; 54 of the 54 references it cites were found in a registry or an index.
Noninvasive In Situ NMR Study of “Dead Lithium” Formation and Lithium Corrosion in Full-Cell Lithium Metal Batteries
Open accessAbstract
Abstract Capacity retention in lithium metal batteries needs to be improved if they are to be commercially viable, the low cycling stability and Li corrosion during storage of lithium metal batteries being even more problematic when there is no excess lithium in the cell. Herein, we develop in situ NMR metrology to study “anode-free” lithium metal batteries where lithium is plated directly onto a bare copper current collector from a LiFePO4 cathode. The methodology allows inactive or “dead lithium” formation during plating and stripping of lithium in a full-cell lithium metal battery to be tracked: dead lithium and SEI formation can be quantified by NMR and their relative rates of formation are here compared in carbonate and ether-electrolytes. Little-to-no dead Li was observed when FEC is used as an additive. The bulk magnetic susceptibility effects arising from the paramagnetic lithium metal were used to distinguish between different surface coverages of lithium deposits. The amount of lithium metal was monitored during rest periods, and lithium metal dissolution (corrosion) was observed in all electrolytes, even during the periods when the battery is not in use, i.e., when no current is flowing, demonstrating that dissolution of lithium remains a critical issue for lithium metal batteries. The high rate of corrosion is attributed to SEI formation on both lithium metal and copper (and Cu+, Cu2+ reduction). Strategies to mitigate the corrosion are explored, the work demonstrating that both polymer coatings and the modification of the copper surface chemistry help to stabilize the lithium metal surface.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pathways for practical high-energy long-cycling lithium metal batteries
Liu, J., Bao, Z., Cui, Y., Dufek, E. J., Goodenough, J. B., Khalifah, P., Li, Q., Liaw, B. Y., Liu, P., Manthiram, A., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0338-x · Cited by 3,412
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Alloy Negative Electrodes for Li-Ion Batteries
Obrovac, M. N., & Chevrier, V. L. (2014) · Chemical Reviews · doi:10.1021/cr500207g · Cited by 2,175
Lin, D., Liu, Y., Liang, Z., Lee, H.-W., Sun, J., Wang, H., Yan, K., Xie, J., & Cui, Y. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.32 · Cited by 1,798
Nanoscale Nucleation and Growth of Electrodeposited Lithium Metal
Pei, A., Zheng, G., Shi, F., Li, Y., & Cui, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04755 · Cited by 1,726
Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries
Zhang, X., Cheng, X., Chen, X., Yan, C., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605989 · Cited by 1,699
Review on gel polymer electrolytes for lithium batteries
Manuel Stephan, A. (2006) · European Polymer Journal · doi:10.1016/j.eurpolymj.2005.09.017 · Cited by 1,422
Quantifying inactive lithium in lithium metal batteries
Fang, C., Li, J., Zhang, M., Zhang, Y., Yang, F., Lee, J. Z., Lee, M.-H., Alvarado, J., Schroeder, M. A., Yang, Y., et al. (2019) · Nature · doi:10.1038/s41586-019-1481-z · Cited by 1,413
Effect of Structure on the Fe3 + / Fe2 + Redox Couple in Iron Phosphates
Padhi, A. K., Nanjundaswamy, K. S., Masquelier, C., Okada, S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837649 · Cited by 1,295
A facile surface chemistry route to a stabilized lithium metal anode
Liang, X., Pang, Q., Kochetkov, I. R., Sempere, M. S., Huang, H., Sun, X., & Nazar, L. F. (2017) · Nature Energy · doi:10.1038/nenergy.2017.119 · Cited by 1,083
Understanding and applying coulombic efficiency in lithium metal batteries
Xiao, J., Li, Q., Bi, Y., Cai, M., Dunn, B., Glossmann, T., Liu, J., Osaka, T., Sugiura, R., Wu, B., et al. (2020) · Nature Energy · doi:10.1038/s41560-020-0648-z · Cited by 1,053
Dead lithium: mass transport effects on voltage, capacity, and failure of lithium metal anodes
Chen, K.-H., Wood, K. N., Kazyak, E., LePage, W. S., Davis, A. L., Sanchez, A. J., & Dasgupta, N. P. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00371d · Cited by 1,007
Weber, R., Genovese, M., Louli, A. J., Hames, S., Martin, C., Hill, I. G., & Dahn, J. R. (2019) · Nature Energy · doi:10.1038/s41560-019-0428-9 · Cited by 948
Wood, K. N., Kazyak, E., Chadwick, A. F., Chen, K.-H., Zhang, J.-G., Thornton, K., & Dasgupta, N. P. (2016) · ACS Central Science · doi:10.1021/acscentsci.6b00260 · Cited by 900
Next-Generation Lithium Metal Anode Engineering via Atomic Layer Deposition
Kozen, A. C., Lin, C.-F., Pearse, A. J., Schroeder, M. A., Han, X., Hu, L., Lee, S.-B., Rubloff, G. W., & Noked, M. (2015) · ACS Nano · doi:10.1021/acsnano.5b02166 · Cited by 816
In situ NMR observation of the formation of metallic lithium microstructures in lithium batteries
Bhattacharyya, R., Key, B., Chen, H., Best, A. S., Hollenkamp, A. F., & Grey, C. P. (2010) · Nature Materials · doi:10.1038/nmat2764 · Cited by 813
Self-citationAnode‐Free Rechargeable Lithium Metal Batteries
Qian, J., Adams, B. D., Zheng, J., Xu, W., Henderson, W. A., Wang, J., Bowden, M. E., Xu, S., Hu, J., & Zhang, J. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602353 · Cited by 746
Failure Mechanism for Fast‐Charged Lithium Metal Batteries with Liquid Electrolytes
Lu, D., Shao, Y., Lozano, T., Bennett, W. D., Graff, G. L., Polzin, B., Zhang, J., Engelhard, M. H., Saenz, N. T., Henderson, W. A., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201400993 · Cited by 740
Hagen, M., Hanselmann, D., Ahlbrecht, K., Maça, R., Gerber, D., & Tübke, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401986 · Cited by 636
Fast ion transport at solid–solid interfaces in hybrid battery anodes
Tu, Z., Choudhury, S., Zachman, M. J., Wei, S., Zhang, K., Kourkoutis, L. F., & Archer, L. A. (2018) · Nature Energy · doi:10.1038/s41560-018-0096-1 · Cited by 536
7Li MRI of Li batteries reveals location of microstructural lithium
Chandrashekar, S., Trease, N. M., Chang, H. J., Du, L.-S., Grey, C. P., & Jerschow, A. (2012) · Nature Materials · doi:10.1038/nmat3246 · Cited by 499
Self-citationKushima, A., So, K. P., Su, C., Bai, P., Kuriyama, N., Maebashi, T., Fujiwara, Y., Bazant, M. Z., & Li, J. (2017) · Nano Energy · doi:10.1016/j.nanoen.2016.12.001 · Cited by 492
Zheng, J., Kim, M. S., Tu, Z., Choudhury, S., Tang, T., & Archer, L. A. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00883g · Cited by 466
Li, Y., Huang, W., Li, Y., Pei, A., Boyle, D. T., & Cui, Y. (2018) · Joule · doi:10.1016/j.joule.2018.08.004 · Cited by 459
Key Issues Hindering a Practical Lithium-Metal Anode
Fang, C., Wang, X., & Meng, Y. S. (2019) · Trends in Chemistry · doi:10.1016/j.trechm.2019.02.015 · Cited by 459
Materials’ Methods: NMR in Battery Research
Pecher, O., Carretero-González, J., Griffith, K. J., & Grey, C. P. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b03183 · Cited by 452
Self-citationEffects of Polymer Coatings on Electrodeposited Lithium Metal
Lopez, J., Pei, A., Oh, J. Y., Wang, G.-J. N., Cui, Y., & Bao, Z. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b06047 · Cited by 452
Jurng, S., Brown, Z. L., Kim, J., & Lucht, B. L. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00364e · Cited by 417
Wang, X., Zhang, M., Alvarado, J., Wang, S., Sina, M., Lu, B., Bouwer, J., Xu, W., Xiao, J., Zhang, J.-G., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b03606 · Cited by 409
The intrinsic behavior of lithium fluoride in solid electrolyte interphases on lithium
He, M., Guo, R., Hobold, G. M., Gao, H., & Gallant, B. M. (2020) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1911017116 · Cited by 372
Fast galvanic lithium corrosion involving a Kirkendall-type mechanism
Lin, D., Liu, Y., Li, Y., Li, Y., Pei, A., Xie, J., Huang, W., & Cui, Y. (2019) · Nature Chemistry · doi:10.1038/s41557-018-0203-8 · Cited by 318
An In Vivo Formed Solid Electrolyte Surface Layer Enables Stable Plating of Li Metal
Pang, Q., Liang, X., Shyamsunder, A., & Nazar, L. F. (2017) · Joule · doi:10.1016/j.joule.2017.11.009 · Cited by 315
Assegie, A. A., Cheng, J.-H., Kuo, L.-M., Su, W.-N., & Hwang, B.-J. (2018) · Nanoscale · doi:10.1039/c7nr09058g · Cited by 309
Steiger, J., Kramer, D., & Mönig, R. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.05.120 · Cited by 284
Strong texturing of lithium metal in batteries
Shi, F., Pei, A., Vailionis, A., Xie, J., Liu, B., Zhao, J., Gong, Y., & Cui, Y. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1708224114 · Cited by 283
Design Principles of Artificial Solid Electrolyte Interphases for Lithium-Metal Anodes
Yu, Z., Cui, Y., & Bao, Z. (2020) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2020.100119 · Cited by 280
Lithium Electrode Morphology during Cycling in Lithium Cells
Yoshimatsu, I., Hirai, T., & Yamaki, J. (1988) · Journal of The Electrochemical Society · doi:10.1149/1.2095351 · Cited by 257
Physical electrochemistry: fundamentals, techniques and applications
(2011) · Choice Reviews Online · doi:10.5860/choice.49-0279 · Cited by 211
Chang, H. J., Trease, N. M., Ilott, A. J., Zeng, D., Du, L.-S., Jerschow, A., & Grey, C. P. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b03396 · Cited by 184
Self-citationElectroless Formation of Hybrid Lithium Anodes for Fast Interfacial Ion Transport
Choudhury, S., Tu, Z., Stalin, S., Vu, D., Fawole, K., Gunceler, D., Sundararaman, R., & Archer, L. A. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201707754 · Cited by 183
Galvanic Corrosion of Lithium‐Powder‐Based Electrodes
Kolesnikov, A., Kolek, M., Dohmann, J. F., Horsthemke, F., Börner, M., Bieker, P. M., Winter, M., & Stan, M. C. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000017 · Cited by 143
Sanchez, A. J., Kazyak, E., Chen, Y., Chen, K., Pattison, E., & Dasgupta, N. P. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c00215 · Cited by 138
Quantification of Dead Lithium via In Situ Nuclear Magnetic Resonance Spectroscopy
Hsieh, Y., Leißing, M., Nowak, S., Hwang, B., Winter, M., & Brunklaus, G. (2020) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2020.100139 · Cited by 135
Nonpolar Alkanes Modify Lithium‐Ion Solvation for Improved Lithium Deposition and Stripping
Amanchukwu, C. V., Kong, X., Qin, J., Cui, Y., & Bao, Z. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201902116 · Cited by 128
Self-citationBrown, Z. L., Jurng, S., Nguyen, C. C., & Lucht, B. L. (2018) · ACS Applied Energy Materials · doi:10.1021/acsaem.8b00705 · Cited by 125
Gunnarsdóttir, A. B., Vema, S., Menkin, S., Marbella, L. E., & Grey, C. P. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta05652a · Cited by 116
Self-citationHuang, W., Boyle, D. T., Li, Y., Li, Y., Pei, A., Chen, H., & Cui, Y. (2018) · ACS Nano · doi:10.1021/acsnano.8b08012 · Cited by 114
Highly Concentrated LiTFSI–EC Electrolytes for Lithium Metal Batteries
Nilsson, V., Kotronia, A., Lacey, M. J., Edström, K., & Johansson, P. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b01203 · Cited by 94
Visualizing skin effects in conductors with MRI: 7 Li MRI experiments and calculations
Ilott, A. J., Shekar, S. C., Klöckner, A., Chang, H. J., Trease, N. M., Grey, C. P., Greengard, L., & Jerschow, A. (2014) · Journal of Magnetic Resonance · doi:10.1016/j.jmr.2014.06.013 · Cited by 93
Self-citationCho, S., Yu, D.-E., Pollard, T. P., Moon, H., Jang, M., Borodin, O. A., & Lee, S. (2020) · iScience · doi:10.1016/j.isci.2020.100844 · Cited by 81
Klein, F., Pinedo, R., Hering, P., Polity, A., Janek, J., & Adelhelm, P. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b10642 · Cited by 77
CuO cathode in lithium cells—II. Reduction mechanism of CuO
Novák, P. (1985) · Electrochimica Acta · doi:10.1016/0013-4686(85)87015-8 · Cited by 70
In situ and operando magnetic resonance imaging of electrochemical cells: A perspective
Mohammadi, M., & Jerschow, A. (2019) · Journal of Magnetic Resonance · doi:10.1016/j.jmr.2019.106600 · Cited by 50
Chiappone, A., Jeremias, S., Bongiovanni, R. M., & Schönhoff, M. (2013) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.23371 · Cited by 18
Cited by
High entropy liquid electrolytes for lithium batteries
Wang, Q., Zhao, C., Wang, J., Yao, Z., Wang, S., Kumar, S. G. H., Ganapathy, S., Eustace, S., Bai, X., Li, B., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-36075-1 · Cited by 299
Dynamic spatial progression of isolated lithium during battery operations
Liu, F., Xu, R., Wu, Y., Boyle, D. T., Yang, A., Xu, J., Zhu, Y., Ye, Y., Yu, Z., Zhang, Z., et al. (2021) · Nature · doi:10.1038/s41586-021-04168-w · Cited by 267
Metadata
- Authors
- Gunnarsdóttir, A. B., Amanchukwu, C. V., Menkin, S., & Grey, C. P.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-11-23
- Volume
- 142
- Issue
- 49
- Pages
- 20814-20827
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W3107005462
- Cited by
- 326
- References
- 54
- FWCI
- 12.57
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.