The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Electroless Formation of a Fluorinated Li/Na Hybrid Interphase for Robust Lithium Anodes
Abstract
Engineering a stable solid electrolyte interphase (SEI) is one of the critical maneuvers in improving the performance of a lithium anode for high-energy-density rechargeable lithium batteries. Herein, we build a fluorinated lithium/sodium hybrid interphase via a facile electroless electrolyte-soaking approach to stabilize the repeated plating/stripping of lithium metal. Jointed experimental and computational characterizations reveal that the fluorinated hybrid SEI mainly consisting of NaF, LiF, Li x PO y F z, and organic components features a mosaic polycrystalline structure with enriched grain boundaries and superior interfacial properties toward Li. This LiF/NaF hybrid SEI exhibits improved ionic conductivity and mechanical strength in comparison to the SEI without NaF. Remarkably, the fluorinated hybrid SEI enables an extended dendrite-free cycling of metallic Li over 1300 h at a high areal capacity of 10 mAh cm –2 in symmetrical cells. Furthermore, full cells based on the LiFePO 4 cathode and hybrid SEI-protected Li anode sustain long-term stability and good capacity retention (96.70% after 200 cycles) at 0.5 C. This work could provide a new avenue for designing robust multifunctional SEI to upgrade the metallic lithium anode.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Lee, C., Yang, W., & Parr, R. G. (1988) · Physical Review B · doi:10.1103/physrevb.37.785 · Cited by 100,874
Density-functional exchange-energy approximation with correct asymptotic behavior
Becke, A. D. (1988) · Physical Review A · doi:10.1103/physreva.38.3098 · Cited by 53,711
Marenich, A. V., Cramer, C. J., & Truhlar, D. G. (2009) · The Journal of Physical Chemistry B · doi:10.1021/jp810292n · Cited by 17,843
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
Pathways for practical high-energy long-cycling lithium metal batteries
Liu, J., Bao, Z., Cui, Y., Dufek, E. J., Goodenough, J. B., Khalifah, P., Li, Q., Liaw, B. Y., Liu, P., Manthiram, A., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0338-x · Cited by 3,412
Self-citationAurbach, D. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00431-6 · Cited by 2,130
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
Self-citationThe Impact of Elastic Deformation on Deposition Kinetics at Lithium/Polymer Interfaces
Monroe, C., & Newman, J. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1850854 · Cited by 1,701
Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries
Zhang, X., Cheng, X., Chen, X., Yan, C., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605989 · Cited by 1,699
A Highly Reversible Room-Temperature Sodium Metal Anode
Seh, Z. W., Sun, J., Sun, Y., & Cui, Y. (2015) · ACS Central Science · doi:10.1021/acscentsci.5b00328 · Cited by 979
Sodium Metal Anodes: Emerging Solutions to Dendrite Growth
Lee, B., Paek, E., Mitlin, D., & Lee, S. W. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00642 · Cited by 940
Xu, Y., Zhu, Y., Liu, Y., & Wang, C. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200346 · Cited by 847
Artificial Interphases for Highly Stable Lithium Metal Anode
Xu, R., Cheng, X.-B., Yan, C., Zhang, X.-Q., Xiao, Y., Zhao, C.-Z., Huang, J.-Q., & Zhang, Q. (2019) · Matter · doi:10.1016/j.matt.2019.05.016 · Cited by 721
Towards better Li metal anodes: Challenges and strategies
Zhang, Y., Zuo, T.-T., Popovic, J., Lim, K., Yin, Y.-X., Maier, J., & Guo, Y.-G. (2020) · Materials Today · doi:10.1016/j.mattod.2019.09.018 · Cited by 653
Yan, C., Yao, Y., Chen, X., Cheng, X., Zhang, X., Huang, J., & Zhang, Q. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201807034 · Cited by 635
Lithium salts for advanced lithium batteries: Li–metal, Li–O2, and Li–S
Younesi, R., Veith, G. M., Johansson, P., Edström, K., & Vegge, T. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01215e · Cited by 600
Thermodynamic Understanding of Li-Dendrite Formation
Gao, X., Zhou, Y.-N., Han, D., Zhou, J., Zhou, D., Tang, W., & Goodenough, J. B. (2020) · Joule · doi:10.1016/j.joule.2020.06.016 · Cited by 537
Implantable Solid Electrolyte Interphase in Lithium-Metal Batteries
Cheng, X.-B., Yan, C., Chen, X., Guan, C., Huang, J.-Q., Peng, H.-J., Zhang, R., Yang, S.-T., & Zhang, Q. (2017) · Chem · doi:10.1016/j.chempr.2017.01.003 · Cited by 524
Dendrite-Free Li-Metal Battery Enabled by a Thin Asymmetric Solid Electrolyte with Engineered Layers
Duan, H., Yin, Y.-X., Shi, Y., Wang, P.-F., Zhang, X.-D., Yang, C.-P., Shi, J.-L., Wen, R., Guo, Y.-G., & Wan, L.-J. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b10864 · Cited by 482
Uniform High Ionic Conducting Lithium Sulfide Protection Layer for Stable Lithium Metal Anode
Chen, H., Pei, A., Lin, D., Xie, J., Yang, A., Xu, J., Lin, K., Wang, J., Wang, H., Shi, F., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900858 · Cited by 472
Lin, D., Liu, Y., Chen, W., Zhou, G., Liu, K., Dunn, B., & Cui, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b01020 · Cited by 465
Stabilizing Lithium Metal Anodes by Uniform Li-Ion Flux Distribution in Nanochannel Confinement
Liu, W., Lin, D., Pei, A., & Cui, Y. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b08730 · Cited by 455
Fluorinated hybrid solid-electrolyte-interphase for dendrite-free lithium deposition
Pathak, R., Chen, K., Gurung, A., Reza, K. M., Bahrami, B., Pokharel, J., Baniya, A., He, W., Wu, F., Zhou, Y., et al. (2020) · Nature Communications · doi:10.1038/s41467-019-13774-2 · Cited by 455
Effects of Polymer Coatings on Electrodeposited Lithium Metal
Lopez, J., Pei, A., Oh, J. Y., Wang, G.-J. N., Cui, Y., & Bao, Z. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b06047 · Cited by 452
Jurng, S., Brown, Z. L., Kim, J., & Lucht, B. L. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00364e · Cited by 417
Solid–Solution-Based Metal Alloy Phase for Highly Reversible Lithium Metal Anode
Jin, S., Ye, Y., Niu, Y., Xu, Y., Jin, H., Wang, J., Sun, Z., Cao, A., Wu, X., Luo, Y., et al. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c01811 · Cited by 391
Modeling Insight into Battery Electrolyte Electrochemical Stability and Interfacial Structure
Borodin, O., Ren, X., Vatamanu, J., von Wald Cresce, A., Knap, J., & Xu, K. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.7b00486 · Cited by 380
Aurbach, D., Zaban, A., Schechter, A., Ein‐Eli, Y., Zinigrad, E., & Markovsky, B. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2048658 · Cited by 360
A Thermally Conductive Separator for Stable Li Metal Anodes
Luo, W., Zhou, L., Fu, K., Yang, Z., Wan, J., Manno, M., Yao, Y., Zhu, H., Yang, B., & Hu, L. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02432 · Cited by 356
Holoubek, J., Yu, M., Yu, S., Li, M., Wu, Z., Xia, D., Bhaladhare, P., Gonzalez, M. S., Pascal, T. A., Liu, P., et al. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c00643 · Cited by 351
Dendrite-free Li deposition using trace-amounts of water as an electrolyte additive
Qian, J., Xu, W., Bhattacharya, P., Engelhard, M., Henderson, W. A., Zhang, Y., & Zhang, J.-G. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.04.009 · Cited by 339
Xu, W., Pei, X., Diercks, C. S., Lyu, H., Ji, Z., & Yaghi, O. M. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b10418 · Cited by 337
High Interfacial-Energy Interphase Promoting Safe Lithium Metal Batteries
Liu, S., Ji, X., Yue, J., Hou, S., Wang, P., Cui, C., Chen, J., Shao, B., Li, J., Han, F., et al. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.9b11750 · Cited by 318
Self-citationYildirim, H., Kinaci, A., Chan, M. K. Y., & Greeley, J. P. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b02904 · Cited by 306
XPS Analysis of Lithium Surfaces Following Immersion in Various Solvents Containing LiBF4
Kanamura, K., Tamura, H., Shiraishi, S., & Takehara, Z. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2044000 · Cited by 267
Sulfurized solid electrolyte interphases with a rapid Li+ diffusion on dendrite-free Li metal anodes
Cheng, X.-B., Yan, C., Peng, H.-J., Huang, J.-Q., Yang, S.-T., & Zhang, Q. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.03.008 · Cited by 257
Zhao, Q., Tu, Z., Wei, S., Zhang, K., Choudhury, S., Liu, X., & Archer, L. A. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201711598 · Cited by 241
Self-citationTuning the Solid Electrolyte Interphase for Selective Li‐ and Na‐Ion Storage in Hard Carbon
Soto, F. A., Yan, P., Engelhard, M. H., Marzouk, A., Wang, C., Xu, G., Chen, Z., Amine, K., Liu, J., Sprenkle, V. L., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606860 · Cited by 234
Self-citationHuo, H., Li, X., Chen, Y., Liang, J., Deng, S., Gao, X., Doyle-Davis, K., Li, R., Guo, X., Shen, Y., et al. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.12.022 · Cited by 230
Ultrathin Bilayer of Graphite/SiO2 as Solid Interface for Reviving Li Metal Anode
Pathak, R., Chen, K., Gurung, A., Reza, K. M., Bahrami, B., Wu, F., Chaudhary, A., Ghimire, N., Zhou, B., Zhang, W., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901486 · Cited by 182
Duan, H., Zhang, J., Chen, X., Zhang, X.-D., Li, J.-Y., Huang, L.-B., Zhang, X., Shi, J.-L., Yin, Y.-X., Zhang, Q., et al. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b10488 · Cited by 158
Sanchez, A. J., Kazyak, E., Chen, Y., Chen, K., Pattison, E., & Dasgupta, N. P. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c00215 · Cited by 138
Liu, X., Deng, X., Liu, R., Yan, H., Guo, Y., Wang, D., & Wan, L. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am505847s · Cited by 120
The Use of UV/vis Absorption to Measure Diffusion Coefficients in LiPF[sub 6] Electrolytic Solutions
Stewart, S. G., & Newman, J. S. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2801378 · Cited by 119
Hu, Z., Zhang, S., Dong, S., Li, Q., Cui, G., & Chen, L. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b00722 · Cited by 102
Improving Lithium Metal Composite Anodes with Seeding and Pillaring Effects of Silicon Nanoparticles
Wang, H., Cao, X., Gu, H., Liu, Y., Li, Y., Zhang, Z., Huang, W., Wang, H., Wang, J., Xu, W., et al. (2020) · ACS Nano · doi:10.1021/acsnano.0c00184 · Cited by 78
Dendrite-Free Lithium Deposition for Lithium Metal Anodes with Interconnected Microsphere Protection
Lee, Y.-G., Ryu, S., Sugimoto, T., Yu, T.-H., Chang, W.-S., Yang, Y., Jung, C., Woo, J., Kang, S. G., Han, H. N., et al. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b01304 · Cited by 50
Huang, X. L., Feng, X., Zhang, B., Zhang, L., Zhang, S.-C., Gao, B., Chu, P. K.-H., & Huo, K. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b08438 · Cited by 50
Cited by
Wu, D., He, J., Liu, J., Wu, M., Qi, S., Wang, H., Huang, J., Li, F., Tang, D., & Ma, J. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202200337 · Cited by 319
Self-citationFluorine Chemistry in Rechargeable Batteries: Challenges, Progress, and Perspectives
Wang, Y., Yang, X., Meng, Y., Wen, Z., Han, R., Hu, X., Sun, B., Kang, F., Li, B., Zhou, D., et al. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00826 · Cited by 255
Self-citation
Metadata
- Authors
- Wang, Y., Liu, F., Fan, G., Qiu, X., Liu, J., Yan, Z., Zhang, K., Cheng, F., & Chen, J.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-02-15
- Volume
- 143
- Issue
- 7
- Pages
- 2829-2837
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W3132548319
- Cited by
- 283
- References
- 50
- FWCI
- 11.88
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.