The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Organic Radical-Assisted Electrochemical Exfoliation for the Scalable Production of High-Quality Graphene
Open accessAbstract
Despite the intensive research efforts devoted to graphene fabrication over the past decade, the production of high-quality graphene on a large scale, at an affordable cost, and in a reproducible manner still represents a great challenge. Here, we report a novel method based on the controlled electrochemical exfoliation of graphite in aqueous ammonium sulfate electrolyte to produce graphene in large quantities and with outstanding quality. Because the radicals (e.g., HO(•)) generated from water electrolysis are responsible for defect formation on graphene during electrochemical exfoliation, a series of reducing agents as additives (e.g., (2,2,6,6-tetramethylpiperidin-1-yl)oxyl (TEMPO), ascorbic acid, and sodium borohydride) have been investigated to eliminate these radicals and thus control the exfoliation process. Remarkably, TEMPO-assisted exfoliation results in large graphene sheets (5-10 μm on average), which exhibit outstanding hole mobilities (∼405 cm(2) V(-1) s(-1)), very low Raman I(D)/I(G) ratios (below 0.1), and extremely high carbon to oxygen (C/O) ratios (∼25.3). Moreover, the graphene ink prepared in dimethylformamide can exhibit concentrations as high as 6 mg mL(-1), thus qualifying this material for intriguing applications such as transparent conductive films and flexible supercapacitors. In general, this robust method for electrochemical exfoliation of graphite offers great promise for the preparation of graphene that can be utilized in industrial applications to create integrated nanocomposites, conductive or mechanical additives, as well as energy storage and conversion devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electric Field Effect in Atomically Thin Carbon Films
Novoselov, K. S., Geim, A. K., Morozov, S. V., Jiang, D., Zhang, Y., Dubonos, S. V., Grigorieva, I. V., & Firsov, A. A. (2004) · Science · doi:10.1126/science.1102896 · Cited by 66,834
The chemistry of graphene oxide
Dreyer, D. R., Park, S., Bielawski, C. W., & Ruoff, R. S. (2010) · Chem. Soc. Rev. · doi:10.1039/b917103g · Cited by 11,653
Processable aqueous dispersions of graphene nanosheets
Li, D., Müller, M. B., Gilje, S., Kaner, R. B., & Wallace, G. G. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.451 · Cited by 9,114
Roll-to-roll production of 30-inch graphene films for transparent electrodes
Bae, S., Kim, H., Lee, Y., Xu, X., Park, J.-S., Zheng, Y., Balakrishnan, J., Lei, T., Ri Kim, H., Song, Y. I., et al. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.132 · Cited by 8,136
High-yield production of graphene by liquid-phase exfoliation of graphite
Hernandez, Y., Nicolosi, V., Lotya, M., Blighe, F. M., Sun, Z., De, S., McGovern, I. T., Holland, B., Byrne, M., Gun'Ko, Y. K., et al. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2008.215 · Cited by 6,285
Perspectives on Carbon Nanotubes and Graphene Raman Spectroscopy
Dresselhaus, M. S., Jorio, A., Hofmann, M., Dresselhaus, G., & Saito, R. (2010) · Nano Letters · doi:10.1021/nl904286r · Cited by 3,254
Paton, K. R., Varrla, E., Backes, C., Smith, R. J., Khan, U., O’Neill, A., Boland, C., Lotya, M., Istrate, O. M., King, P., et al. (2014) · Nature Materials · doi:10.1038/nmat3944 · Cited by 2,401
Liquid Phase Production of Graphene by Exfoliation of Graphite in Surfactant/Water Solutions
Lotya, M., Hernandez, Y., King, P. J., Smith, R. J., Nicolosi, V., Karlsson, L. S., Blighe, F. M., De, S., Wang, Z., McGovern, I. T., et al. (2009) · Journal of the American Chemical Society · doi:10.1021/ja807449u · Cited by 2,282
Highly conducting graphene sheets and Langmuir–Blodgett films
Li, X., Zhang, G., Bai, X., Sun, X., Wang, X., Wang, E., & Dai, H. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2008.210 · Cited by 2,017
Exfoliation of Graphite into Graphene in Aqueous Solutions of Inorganic Salts
Parvez, K., Wu, Z.-S., Li, R., Liu, X., Graf, R., Feng, X., & Müllen, K. (2014) · Journal of the American Chemical Society · doi:10.1021/ja5017156 · Cited by 1,440
Self-citation
Cited by
Interface-Assisted Synthesis of 2D Materials: Trend and Challenges
Dong, R., Zhang, T., & Feng, X. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00056 · Cited by 710
Self-citationGreen synthesis of graphene oxide by seconds timescale water electrolytic oxidation
Pei, S., Wei, Q., Huang, K., Cheng, H.-M., & Ren, W. (2018) · Nature Communications · doi:10.1038/s41467-017-02479-z · Cited by 664
Kumar, R., Sahoo, S., Joanni, E., Singh, R. K., Tan, W. K., Kar, K. K., & Matsuda, A. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.100786 · Cited by 554
Graphene-based composites for electrochemical energy storage
Wang, B., Ruan, T., Chen, Y., Jin, F., Peng, L., Zhou, Y., Wang, D., & Dou, S. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.08.004 · Cited by 530
Zhang, P., Wang, F., Yu, M., Zhuang, X., & Feng, X. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00561c · Cited by 514
Self-citationLi, H., Hou, Y., Wang, F., Lohe, M. R., Zhuang, X., Niu, L., & Feng, X. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601847 · Cited by 512
Self-citationProduction and processing of graphene and related materials
Backes, C., Abdelkader, A. M., Alonso, C., Andrieux-Ledier, A., Arenal, R., Azpeitia, J., Balakrishnan, N., Banszerus, L., Barjon, J., Bartali, R., et al. (2020) · 2D Materials · doi:10.1088/2053-1583/ab1e0a · Cited by 501
Self-citationGraphene and its electrochemistry – an update
Ambrosi, A., Chua, C. K., Latiff, N. M., Loo, A. H., Wong, C. H. A., Eng, A. Y. S., Bonanni, A., & Pumera, M. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00136j · Cited by 469
Synthesis of graphene materials by electrochemical exfoliation: Recent progress and future potential
Liu, F., Wang, C., Sui, X., Riaz, M. A., Xu, M., Wei, L., & Chen, Y. (2019) · Carbon Energy · doi:10.1002/cey2.14 · Cited by 407
2D Materials in Flexible Electronics: Recent Advances and Future Prospectives
Katiyar, A. K., Hoang, A. T., Xu, D., Hong, J., Kim, B. J., Ji, S., & Ahn, J.-H. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00302 · Cited by 363
Top-down synthesis of graphene: A comprehensive review
Kumar, N., Salehiyan, R., Chauke, V., Joseph Botlhoko, O., Setshedi, K., Scriba, M., Masukume, M., & Sinha Ray, S. (2021) · FlatChem · doi:10.1016/j.flatc.2021.100224 · Cited by 336
Scalable Fabrication and Integration of Graphene Microsupercapacitors through Full Inkjet Printing
Li, J., Sollami Delekta, S., Zhang, P., Yang, S., Lohe, M. R., Zhuang, X., Feng, X., & Östling, M. (2017) · ACS Nano · doi:10.1021/acsnano.7b03354 · Cited by 334
Self-citationA Review on Graphene Fibers: Expectations, Advances, and Prospects
Fang, B., Chang, D., Xu, Z., & Gao, C. (2020) · Advanced Materials · doi:10.1002/adma.201902664 · Cited by 332
Precision synthesis versus bulk-scale fabrication of graphenes
Wang, X.-Y., Narita, A., & Müllen, K. (2017) · Nature Reviews Chemistry · doi:10.1038/s41570-017-0100 · Cited by 330
Self-citationHan, C., Zhang, N., & Xu, Y.-J. (2016) · Nano Today · doi:10.1016/j.nantod.2016.05.008 · Cited by 318
Scalable exfoliation and dispersion of two-dimensional materials – an update
Tao, H., Zhang, Y., Gao, Y., Sun, Z., Yan, C., & Texter, J. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp06813h · Cited by 317
New‐Generation Graphene from Electrochemical Approaches: Production and Applications
Yang, S., Lohe, M. R., Müllen, K., & Feng, X. (2016) · Advanced Materials · doi:10.1002/adma.201505326 · Cited by 313
Self-citationSu, P., Zhou, M., Lu, X., Yang, W., Ren, G., & Cai, J. (2019) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2018.12.075 · Cited by 313
Graphene-Based Nanomaterials for Catalysis
Hu, M., Yao, Z., & Wang, X. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b05048 · Cited by 295
Zhou, F., Huang, H., Xiao, C., Zheng, S., Shi, X., Qin, J., Fu, Q., Bao, X., Feng, X., Müllen, K., et al. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b03235 · Cited by 291
Self-citationRicciardulli, A. G., Yang, S., Wetzelaer, G. A. H., Feng, X., & Blom, P. W. M. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706010 · Cited by 267
Self-citationShi, G., Araby, S., Gibson, C. T., Meng, Q., Zhu, S., & Ma, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706705 · Cited by 267
Lv, H., Pan, Q., Song, Y., Liu, X.-X., & Liu, T. (2020) · Nano-Micro Letters · doi:10.1007/s40820-020-00451-z · Cited by 254
Synthesis of atomically thin sheets by the intercalation-based exfoliation of layered materials
Yang, R., Fan, Y., Mei, L., Shin, H. S., Voiry, D., Lu, Q., Li, J., & Zeng, Z. (2023) · Nature Synthesis · doi:10.1038/s44160-022-00232-z · Cited by 253
Díez-Pascual, A. M., Sainz-Urruela, C., Vallés, C., Vera-López, S., & San Andrés, M. P. (2020) · Nanomaterials · doi:10.3390/nano10020239 · Cited by 44
Metadata
- Authors
- Yang, S., Brüller, S., Wu, Z.-S., Liu, Z., Parvez, K., Dong, R., Richard, F., Samorì, P., Feng, X., & Müllen, K.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-10-22
- Volume
- 137
- Issue
- 43
- Pages
- 13927-13932
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2225317424
- Cited by
- 344
- References
- 33
- FWCI
- 13.46
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.