The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Surface Chemistry in Cobalt Phosphide-Stabilized Lithium–Sulfur Batteries
Abstract
Chemistry at the cathode/electrolyte interface plays an important role for lithium–sulfur batteries in which stable cycling of the sulfur cathode requires confinement of the lithium polysulfide intermediates and their fast electrochemical conversion on the electrode surface. While many materials have been found to be effective for confining polysulfides, the underlying chemical interactions remain poorly understood. We report a new and general lithium polysulfide-binding mechanism enabled by surface oxidation layers of transition-metal phosphide and chalcogenide materials. We for the first time find that CoP nanoparticles strongly adsorb polysulfides because their natural oxidation (forming Co–O–P-like species) activates the surface Co sites for binding polysulfides via strong Co–S bonding. With a surface oxidation layer capable of confining polysulfides and an inner core suitable for conducting electrons, the CoP nanoparticles are thus a desirable candidate for stabilizing and improving the performance of sulfur cathodes in lithium–sulfur batteries. We demonstrate that sulfur electrodes that hold a high mass loading of 7 mg cm –2 and a high areal capacity of 5.6 mAh cm –2 can be stably cycled for 200 cycles. We further reveal that this new surface oxidation-induced polysulfide-binding scheme applies to a series of transition-metal phosphide and chalcogenide materials and can explain their stabilizing effects for lithium–sulfur batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Lithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
Challenges and Prospects of Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., & Su, Y.-S. (2013) · Accounts of Chemical Research · doi:10.1021/ar300179v · Cited by 2,380
Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2016) · Nature Energy · doi:10.1038/nenergy.2016.132 · Cited by 2,167
Nanostructured sulfur cathodes
Yang, Y., Zheng, G., & Cui, Y. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35256g · Cited by 1,947
Powering Lithium–Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts
Yuan, Z., Peng, H.-J., Hou, T.-Z., Huang, J.-Q., Chen, C.-M., Wang, D.-W., Cheng, X.-B., Wei, F., & Zhang, Q. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04166 · Cited by 1,438
Pang, Q., Kundu, D., Cuisinier, M., & Nazar, L. F. (2014) · Nature Communications · doi:10.1038/ncomms5759 · Cited by 1,318
Molybdenum phosphide as an efficient electrocatalyst for the hydrogen evolution reaction
Xiao, P., Sk, M. A., Thia, L., Ge, X., Lim, R. J., Wang, J.-Y., Lim, K. H., & Wang, X. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00957f · Cited by 1,297
Cited by
Advances in Lithium–Sulfur Batteries: From Academic Research to Commercial Viability
Chen, Y., Wang, T., Tian, H., Su, D., Zhang, Q., & Wang, G. (2021) · Advanced Materials · doi:10.1002/adma.202003666 · Cited by 870
Lithium–Sulfur Batteries under Lean Electrolyte Conditions: Challenges and Opportunities
Zhao, M., Li, B., Peng, H., Yuan, H., Wei, J., & Huang, J. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201909339 · Cited by 663
Yuan, H., Peng, H., Li, B., Xie, J., Kong, L., Zhao, M., Chen, X., Huang, J., & Zhang, Q. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201802768 · Cited by 626
Current Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
Multifunctional Transition Metal‐Based Phosphides in Energy‐Related Electrocatalysis
Li, Y., Dong, Z., & Jiao, L. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902104 · Cited by 603
Deciphering the Modulation Essence of p Bands in Co-Based Compounds on Li-S Chemistry
Zhou, J., Liu, X., Zhu, L., Zhou, J., Guan, Y., Chen, L., Niu, S., Cai, J., Sun, D., Zhu, Y., et al. (2018) · Joule · doi:10.1016/j.joule.2018.08.010 · Cited by 548
A review on the status and challenges of electrocatalysts in lithium-sulfur batteries
He, J., & Manthiram, A. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.04.038 · Cited by 479
Emerging Catalysts to Promote Kinetics of Lithium–Sulfur Batteries
Wang, P., Xi, B., Huang, M., Chen, W., Feng, J., & Xiong, S. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202002893 · Cited by 451
Selective Catalysis Remedies Polysulfide Shuttling in Lithium‐Sulfur Batteries
Hua, W., Li, H., Pei, C., Xia, J., Sun, Y., Zhang, C., Lv, W., Tao, Y., Jiao, Y., Zhang, B., et al. (2021) · Advanced Materials · doi:10.1002/adma.202101006 · Cited by 449
Shi, Y., Li, M., Yu, Y., & Zhang, B. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02577a · Cited by 426
Structural Design of Lithium–Sulfur Batteries: From Fundamental Research to Practical Application
Yang, X., Li, X., Adair, K., Zhang, H., & Sun, X. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0010-3 · Cited by 411
Ng, S., Lau, M. Y. L., & Ong, W. (2021) · Advanced Materials · doi:10.1002/adma.202008654 · Cited by 404
Parra-Puerto, A., Ng, K. L., Fahy, K., Goode, A. E., Ryan, M. P., & Kucernak, A. (2019) · ACS Catalysis · doi:10.1021/acscatal.9b03359 · Cited by 391
2D MoN‐VN Heterostructure To Regulate Polysulfides for Highly Efficient Lithium‐Sulfur Batteries
Ye, C., Jiao, Y., Jin, H., Slattery, A. D., Davey, K., Wang, H., & Qiao, S. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201810579 · Cited by 385
Self-citationZhao, M., Peng, H., Zhang, Z., Li, B., Chen, X., Xie, J., Chen, X., Wei, J., Zhang, Q., & Huang, J. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201812062 · Cited by 364
Zhang, Z., Peng, H., Zhao, M., & Huang, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707536 · Cited by 357
Hao, H., Hutter, T., Boyce, B. L., Watt, J., Liu, P., & Mitlin, D. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00838 · Cited by 314
Wang, M., Fan, L., Sun, X., Guan, B., Jiang, B., Wu, X., Tian, D., Sun, K., Qiu, Y., Yin, X., et al. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01564 · Cited by 312
Lei, J., Fan, X.-X., Liu, T., Xu, P., Hou, Q., Li, K., Yuan, R.-M., Zheng, M.-S., Dong, Q.-F., & Chen, J.-J. (2022) · Nature Communications · doi:10.1038/s41467-021-27866-5 · Cited by 308
Huang, S., Lim, Y. V., Zhang, X., Wang, Y., Zheng, Y., Kong, D., Ding, M., Yang, S. A., & Yang, H. Y. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.06.052 · Cited by 303
Zhang, N., Li, Y., Xu, J., Li, J., Wei, B., Ding, Y., Amorim, I., Thomas, R., Thalluri, S. M., Liu, Y., et al. (2019) · ACS Nano · doi:10.1021/acsnano.9b04810 · Cited by 292
Redox Comediation with Organopolysulfides in Working Lithium-Sulfur Batteries
Zhao, M., Li, B.-Q., Chen, X., Xie, J., Yuan, H., & Huang, J.-Q. (2020) · Chem · doi:10.1016/j.chempr.2020.09.015 · Cited by 280
12 years roadmap of the sulfur cathode for lithium sulfur batteries (2009–2020)
Liu, T., Hu, H., Ding, X., Yuan, H., Jin, C., Nai, J., Liu, Y., Wang, Y., Wan, Y., & Tao, X. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.05.023 · Cited by 278
Shen, J., Xu, X., Liu, J., Liu, Z., Li, F., Hu, R., Liu, J., Hou, X., Feng, Y., Yu, Y., et al. (2019) · ACS Nano · doi:10.1021/acsnano.9b02903 · Cited by 271
Chen, Y., Zhang, W., Zhou, D., Tian, H., Su, D., Wang, C., Stockdale, D., Kang, F., Li, B., & Wang, G. (2019) · ACS Nano · doi:10.1021/acsnano.9b01079 · Cited by 257
Wang, J., Ji, Y., Yin, R., Li, Y., Shao, Q., & Huang, X. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta00598f · Cited by 174
Metadata
- Authors
- Zhong, Y., Yin, L., He, P., Liu, W., Wu, Z., & Wang, H.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-01-22
- Volume
- 140
- Issue
- 4
- Pages
- 1455-1459
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2782679756
- Cited by
- 458
- References
- 38
- FWCI
- 24.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.