The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Effects of Polymer Coatings on Electrodeposited Lithium Metal
Abstract
The electrodeposition of lithium metal is a key process in next-generation, high energy density storage devices. However, the high reactivity of the lithium metal causes short cycling lifetimes and dendrite growth that can pose a serious safety issue. Recently, a number of approaches have been pursued to stabilize the lithium metal-electrolyte interface, including soft polymeric coatings that have shown the ability to enable high-rate and high-capacity lithium metal cycling, but a clear understanding of how to design and modify these coatings has not yet been established. In this work, we studied the effects of several polymers with systematically varied chemical and mechanical properties as coatings on the lithium metal anode. By examining the early stages of lithium metal deposition, we determine that the morphology of the lithium particles is strongly influenced by the chemistry of the polymer coating. We have identified polymer dielectric constant and surface energy as two key descriptors of the lithium deposit size. Low surface energy polymers were found to promote larger deposits with smaller surface areas. This may be explained by a reduced interaction between the coating and the lithium surface and thus an increase in the interfacial energy. On the other hand, high dielectric constant polymers were found to increase the exchange current and gave larger lithium deposits due to the decreased overpotentials at a fixed current density. We also observed that the thickness of the polymer coating should be optimized for each individual polymer. Furthermore, polymer reactivity was found to strongly influence the Coulombic efficiency. Overall, this work offers new fundamental insights into lithium electrodeposition processes and provides direction for the design of new polymer coatings to better stabilize the lithium metal anode.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrochemical Methods: Fundamentals and Applications
de Rooij, D. M. R. (2003) · Anti-Corrosion Methods and Materials · doi:10.1108/acmm.2003.12850eae.001 · Cited by 13,009
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
The path towards sustainable energy
Chu, S., Cui, Y., & Liu, N. (2017) · Nature Materials · doi:10.1038/nmat4834 · Cited by 4,791
Self-citationLithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2016) · Nature Energy · doi:10.1038/nenergy.2016.132 · Cited by 2,167
Interconnected hollow carbon nanospheres for stable lithium metal anodes
Zheng, G., Lee, S. W., Liang, Z., Lee, H.-W., Yan, K., Yao, H., Wang, H., Li, W., Chu, S., & Cui, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.152 · Cited by 1,764
Self-citationNanoscale Nucleation and Growth of Electrodeposited Lithium Metal
Pei, A., Zheng, G., Shi, F., Li, Y., & Cui, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04755 · Cited by 1,726
Self-citation
Cited by
Designing solid-state electrolytes for safe, energy-dense batteries
Zhao, Q., Stalin, S., Zhao, C.-Z., & Archer, L. A. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0165-5 · Cited by 2,372
MXene chemistry, electrochemistry and energy storage applications
Li, X., Huang, Z., Shuck, C. E., Liang, G., Gogotsi, Y., & Zhi, C. (2022) · Nature Reviews Chemistry · doi:10.1038/s41570-022-00384-8 · Cited by 1,495
Designing polymers for advanced battery chemistries
Lopez, J., Mackanic, D. G., Cui, Y., & Bao, Z. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0103-6 · Cited by 894
Self-citationRecent Advances in Energy Chemistry between Solid-State Electrolyte and Safe Lithium-Metal Anodes
Cheng, X.-B., Zhao, C.-Z., Yao, Y.-X., Liu, H., & Zhang, Q. (2019) · Chem · doi:10.1016/j.chempr.2018.12.002 · Cited by 874
Ma, L., Li, Q., Ying, Y., Ma, F., Chen, S., Li, Y., Huang, H., & Zhi, C. (2021) · Advanced Materials · doi:10.1002/adma.202007406 · Cited by 739
Lithium Metal Anodes with Nonaqueous Electrolytes
Zhang, J.-G., Xu, W., Xiao, J., Cao, X., & Liu, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00275 · Cited by 730
Stabilizing metal battery anodes through the design of solid electrolyte interphases
Zhao, Q., Stalin, S., & Archer, L. A. (2021) · Joule · doi:10.1016/j.joule.2021.03.024 · Cited by 629
Self-smoothing anode for achieving high-energy lithium metal batteries under realistic conditions
Niu, C., Pan, H., Xu, W., Xiao, J., Zhang, J.-G., Luo, L., Wang, C., Mei, D., Meng, J., Wang, X., et al. (2019) · Nature Nanotechnology · doi:10.1038/s41565-019-0427-9 · Cited by 589
Homogeneous and Fast Ion Conduction of PEO‐Based Solid‐State Electrolyte at Low Temperature
Xu, S., Sun, Z., Sun, C., Li, F., Chen, K., Zhang, Z., Hou, G., Cheng, H., & Li, F. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202007172 · Cited by 549
Moving beyond 99.9% Coulombic efficiency for lithium anodes in liquid electrolytes
Hobold, G. M., Lopez, J., Guo, R., Minafra, N., Banerjee, A., Shirley Meng, Y., Shao-Horn, Y., & Gallant, B. M. (2021) · Nature Energy · doi:10.1038/s41560-021-00910-w · Cited by 547
Self-citationFiller‐Integrated Composite Polymer Electrolyte for Solid‐State Lithium Batteries
Liu, S., Liu, W., Ba, D., Zhao, Y., Ye, Y., Li, Y., & Liu, J. (2023) · Advanced Materials · doi:10.1002/adma.202110423 · Cited by 542
Liu, D.-H., Bai, Z., Li, M., Yu, A., Luo, D., Liu, W., Yang, L., Lu, J., Amine, K., & Chen, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00636b · Cited by 483
Zheng, J., Kim, M. S., Tu, Z., Choudhury, S., Tang, T., & Archer, L. A. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00883g · Cited by 466
The passivity of lithium electrodes in liquid electrolytes for secondary batteries
He, X., Bresser, D., Passerini, S., Baakes, F., Krewer, U., Lopez, J., Mallia, C. T., Shao-Horn, Y., Cekic-Laskovic, I., Wiemers-Meyer, S., et al. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00345-5 · Cited by 393
Self-citationZou, P., Sui, Y., Zhan, H., Wang, C., Xin, H. L., Cheng, H.-M., Kang, F., & Yang, C. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01100 · Cited by 368
Progress in Solid Polymer Electrolytes for Lithium‐Ion Batteries and Beyond
An, Y., Han, X., Liu, Y., Azhar, A., Na, J., Nanjundan, A. K., Wang, S., Yu, J., & Yamauchi, Y. (2022) · Small · doi:10.1002/smll.202103617 · Cited by 363
Piao, Z., Xiao, P., Luo, R., Ma, J., Gao, R., Li, C., Tan, J., Yu, K., Zhou, G., & Cheng, H. (2022) · Advanced Materials · doi:10.1002/adma.202108400 · Cited by 345
Gunnarsdóttir, A. B., Amanchukwu, C. V., Menkin, S., & Grey, C. P. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c10258 · Cited by 326
Two-Dimensional Polymers and Polymerizations
Evans, A. M., Strauss, M. J., Corcos, A. R., Hirani, Z., Ji, W., Hamachi, L. S., Aguilar-Enriquez, X., Chavez, A. D., Smith, B. J., & Dichtel, W. R. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01184 · Cited by 324
Understanding and suppression strategies toward stable Li metal anode for safe lithium batteries
Yasin, G., Arif, M., Mehtab, T., Lu, X., Yu, D., Muhammad, N., Nazir, M. T., & Song, H. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.09.020 · Cited by 317
An Autotransferable g‐C3N4 Li+‐Modulating Layer toward Stable Lithium Anodes
Guo, Y., Niu, P., Liu, Y., Ouyang, Y., Li, D., Zhai, T., Li, H., & Cui, Y. (2019) · Advanced Materials · doi:10.1002/adma.201900342 · Cited by 314
Self-citationStrategies towards enabling lithium metal in batteries: interphases and electrodes
Horstmann, B., Shi, J., Amine, R., Werres, M., He, X., Jia, H., Hausen, F., Cekic-Laskovic, I., Wiemers-Meyer, S., Lopez, J., et al. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00767j · Cited by 298
Self-citationDai, H., Xi, K., Liu, X., Lai, C., & Zhang, S. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b08963 · Cited by 283
Electroless Formation of a Fluorinated Li/Na Hybrid Interphase for Robust Lithium Anodes
Wang, Y., Liu, F., Fan, G., Qiu, X., Liu, J., Yan, Z., Zhang, K., Cheng, F., & Chen, J. (2021) · Journal of the American Chemical Society · doi:10.1021/jacs.0c12051 · Cited by 283
Boaretto, N., Garbayo, I., Valiyaveettil-SobhanRaj, S., Quintela, A., Li, C., Casas-Cabanas, M., & Aguesse, F. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229919 · Cited by 271
Guo, W., Zhang, W., Si, Y., Wang, D., Fu, Y., & Manthiram, A. (2021) · Nature Communications · doi:10.1038/s41467-021-23155-3 · Cited by 268
Zheng, Z.-J., Ye, H., & Guo, Z.-P. (2021) · Energy & Environmental Science · doi:10.1039/d0ee03181j · Cited by 263
Knocking down the kinetic barriers towards fast-charging and low-temperature sodium metal batteries
Zheng, X., Gu, Z., Fu, J., Wang, H., Ye, X., Huang, L., Liu, X., Wu, X., Luo, W., & Huang, Y. (2021) · Energy & Environmental Science · doi:10.1039/d1ee01404h · Cited by 256
A Dynamic, Electrolyte-Blocking, and Single-Ion-Conductive Network for Stable Lithium-Metal Anodes
Yu, Z., Mackanic, D. G., Michaels, W., Lee, M., Pei, A., Feng, D., Zhang, Q., Tsao, Y., Amanchukwu, C. V., Yan, X., et al. (2019) · Joule · doi:10.1016/j.joule.2019.07.025 · Cited by 253
Self-citationEzeigwe, E. R., Dong, L., Manjunatha, R., Tan, M., Yan, W., & Zhang, J. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.105907 · Cited by 87
Metadata
- Authors
- Lopez, J., Pei, A., Oh, J. Y., Wang, G.-J. N., Cui, Y., & Bao, Z.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-08-28
- Volume
- 140
- Issue
- 37
- Pages
- 11735-11744
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2888947507
- Cited by
- 452
- References
- 42
- FWCI
- 17.12
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.