The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Surface Grafted Sulfobetaine Polymers via Atom Transfer Radical Polymerization as Superlow Fouling Coatings
Abstract
One of the sulfobetaine methacrylate (SBMA) monomers, N-(3-sulfopropyl)-N-(methacryloxyethyl)-N,N-dimethylammonium betaine, was polymerized onto initiator-covered gold surfaces using atom transfer radical polymerization (ATRP) to form uniform polymer brushes. Self-assembled monolayers (SAMs) with ATRP initiators were characterized by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). The thickness of grafted poly(SBMA) films was measured by ellipsometry. Fibrinogen adsorption on poly(SBMA) grafted surfaces was measured with a surface plasmon resonance (SPR) sensor. Two approaches were compared to graft ATRP initiators onto gold surfaces for surface polymerization and subsequent protein adsorption on these polymer grafted surfaces. The first was to prepare a SAM from omega-mercaptoundecyl bromoisobutyrate onto a gold surface. Superlow fouling surfaces with well-controlled poly(SBMA) brushes were achieved using this approach (e.g., fibrinogen adsorption <0.3 ng/cm2). The second approach was to react bromoisobutyryl bromide with a hydroxyl-terminated SAM on a gold surface. Although protein adsorption decreased as the density of surface initiators increased, the surface prepared using the second approach was not able to achieve as low protein adsorption as the first approach. Key parameters to achieve superlow fouling surfaces were studied and discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Survey of Structure−Property Relationships of Surfaces that Resist the Adsorption of Protein
Ostuni, E., Chapman, R. G., Holmlin, R. E., Takayama, S., & Whitesides, G. M. (2001) · Langmuir · doi:10.1021/la010384m · Cited by 1,799
Luk, Y.-Y., Kato, M., & Mrksich, M. (2000) · Langmuir · doi:10.1021/la0004653 · Cited by 414
Cited by
Jiang, S., & Cao, Z. (2010) · Advanced Materials · doi:10.1002/adma.200901407 · Cited by 2,027
Self-citationBarbey, R., Lavanant, L., Paripovic, D., Schüwer, N., Sugnaux, C., Tugulu, S., & Klok, H.-A. (2009) · Chemical Reviews · doi:10.1021/cr900045a · Cited by 1,753
Polymeric materials with antimicrobial activity
Muñoz-Bonilla, A., & Fernández-García, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.08.005 · Cited by 1,221
Zoppe, J. O., Ataman, N. C., Mocny, P., Wang, J., Moraes, J., & Klok, H.-A. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00314 · Cited by 1,046
Zwitteration: Coating Surfaces with Zwitterionic Functionality to Reduce Nonspecific Adsorption
Schlenoff, J. B. (2014) · Langmuir · doi:10.1021/la500057j · Cited by 951
Nguyen, T., Roddick, F., & Fan, L. (2012) · Membranes · doi:10.3390/membranes2040804 · Cited by 802
Inhibition of bacterial adhesion and biofilm formation on zwitterionic surfaces
Cheng, G., Zhang, Z., Chen, S., Bryers, J. D., & Jiang, S. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.05.041 · Cited by 729
Self-citationTuson, H. H., & Weibel, D. B. (2013) · Soft Matter · doi:10.1039/c3sm27705d · Cited by 720
Biocompatible polymer materials: Role of protein–surface interactions
Chen, H., Yuan, L., Song, W., Wu, Z., & Li, D. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.07.006 · Cited by 706
Boyer, C., Corrigan, N. A., Jung, K., Nguyen, D., Nguyen, T.-K., Adnan, N. N. M., Oliver, S., Shanmugam, S., & Yeow, J. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00396 · Cited by 483
Blood compatibility of surfaces with superlow protein adsorption
Zhang, Z., Zhang, M., Chen, S., Horbett, T. A., Ratner, B. D., & Jiang, S. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.07.039 · Cited by 462
Self-citationStructures and Synthesis of Zwitterionic Polymers
Laschewsky, A. (2014) · Polymers · doi:10.3390/polym6051544 · Cited by 440
An New Avenue to Nonfouling Materials
Chen, S., & Jiang, S. (2008) · Advanced Materials · doi:10.1002/adma.200701164 · Cited by 406
Self-citationWu, J., Lin, W., Wang, Z., Chen, S., & Chang, Y. (2012) · Langmuir · doi:10.1021/la300394c · Cited by 388
Self-citationA Switchable Biocompatible Polymer Surface with Self‐Sterilizing and Nonfouling Capabilities
Cheng, G., Xue, H., Zhang, Z., Chen, S., & Jiang, S. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200803570 · Cited by 371
Self-citationBioactive surfaces and biomaterials via atom transfer radical polymerization
Xu, F. J., Neoh, K. G., & Kang, E. T. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.04.005 · Cited by 368
Chang, Y., Chang, W.-J., Shih, Y.-J., Wei, T.-C., & Hsiue, G.-H. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200055k · Cited by 325
Self-citationZhang, D., Chen, Q., Shi, C., Chen, M., Ma, K., Wan, J., & Liu, R. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202007226 · Cited by 303
Nonfouling Behavior of Polycarboxybetaine-Grafted Surfaces: Structural and Environmental Effects
Zhang, Z., Vaisocherová, H., Cheng, G., Yang, W., Xue, H., & Jiang, S. (2008) · Biomacromolecules · doi:10.1021/bm800407r · Cited by 303
Self-citationYue, W.-W., Li, H.-J., Xiang, T., Qin, H., Sun, S.-D., & Zhao, C.-S. (2013) · Journal of Membrane Science · doi:10.1016/j.memsci.2013.06.029 · Cited by 299
Probing the Surface Hydration of Nonfouling Zwitterionic and PEG Materials in Contact with Proteins
Leng, C., Hung, H.-C., Sun, S., Wang, D., Li, Y., Jiang, S., & Chen, Z. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b05627 · Cited by 291
Self-citationYang, Y.-F., Li, Y., Li, Q.-L., Wan, L.-S., & Xu, Z.-K. (2010) · Journal of Membrane Science · doi:10.1016/j.memsci.2010.06.048 · Cited by 289
Blood compatible materials: state of the art
Liu, X., Yuan, L., Li, D., Tang, Z., Wang, Y., Chen, G., Chen, H., & Brash, J. L. (2014) · J. Mater. Chem. B · doi:10.1039/c4tb00881b · Cited by 288
Yang, R., Xu, J., Ozaydin-Ince, G., Wong, S. Y., & Gleason, K. K. (2011) · Chemistry of Materials · doi:10.1021/cm1031392 · Cited by 276
Polysulfobetaine-Grafted Surfaces as Environmentally Benign Ultralow Fouling Marine Coatings
Zhang, Z., Finlay, J. A., Wang, L., Gao, Y., Callow, J. A., Callow, M. E., & Jiang, S. (2009) · Langmuir · doi:10.1021/la901957k · Cited by 274
Self-citationChiang, Y.-C., Chang, Y., Higuchi, A., Chen, W.-Y., & Ruaan, R.-C. (2009) · Journal of Membrane Science · doi:10.1016/j.memsci.2009.04.044 · Cited by 265
Self-citationYang, W., Chen, S., Cheng, G., Vaisocherová, H., Xue, H., Li, W., Zhang, J., & Jiang, S. (2008) · Langmuir · doi:10.1021/la801487f · Cited by 258
Self-citationZhao, J., Shi, Q., Luan, S., Song, L., Yang, H., Shi, H., Jin, J., Li, X., Yin, J., & Stagnaro, P. (2011) · Journal of Membrane Science · doi:10.1016/j.memsci.2010.10.046 · Cited by 208
Biomimetic Anchors for Antifouling and Antibacterial Polymer Brushes on Stainless Steel
Yang, W. J., Cai, T., Neoh, K.-G., Kang, E.-T., Dickinson, G. H., Teo, S. L.-M., & Rittschof, D. (2011) · Langmuir · doi:10.1021/la200620s · Cited by 202
Protein–polymer conjugation — moving beyond PEGylation
Qi, Y., & Chilkoti, A. (2015) · Current Opinion in Chemical Biology · doi:10.1016/j.cbpa.2015.08.009 · Cited by 176
Zhao, C., Li, L., & Zheng, J. (2010) · Langmuir · doi:10.1021/la103382j · Cited by 100
Wang, L., Xu, R., Meng, L., Zhang, Q., Qian, Z., Chen, J., & Pan, C. (2024) · Biomaterials Advances · doi:10.1016/j.bioadv.2024.213960 · Cited by 32
Antifouling zwitterionic pSBMA‐MSN particles for biomedical applications
Beltrán‐Osuna, Á. A., Ródenas‐Rochina, J., Gómez Ribelles, J. L., & Perilla, J. E. (2019) · Polymers for Advanced Technologies · doi:10.1002/pat.4505 · Cited by 14
Metadata
- Authors
- Zhang, Z., Chen, S., Chang, Y., & Jiang, S.
- Venue
- The Journal of Physical Chemistry B
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-05-12
- Volume
- 110
- Issue
- 22
- Pages
- 10799-10804
- ISSN
- 1520-5207 (ISSN-L)
- 1520-6106
- OpenAlex
- W2064636572
- Cited by
- 539
- References
- 2
- FWCI
- 10.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.