The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Effects of Surface Blocking Layer of Sb2S3 on Nanocrystalline TiO2 for CH3NH3PbI3 Perovskite Solar Cells
Abstract
Sb 2 S 3 layers were inserted at the interface between TiO 2 and CH 3 NH 3 PbI 3 perovskite to create CH 3 NH 3 PbI 3 solar cells using inorganic hole transporting material (CuSCN). The CH 3 NH 3 PbI 3 layer was spin-coated by a one-drop method onto the nanocrystalline TiO 2 layer. The photoenergy conversion efficiencies were improved with Sb 2 S 3 layers (the best efficiency: 5.24%). During the light exposure test without encapsulation, the CH 3 NH 3 PbI 3 solar cells without Sb 2 S 3 deteriorated to zero efficiency in 12 h and were completely changed from black to yellow because the perovskite CH 3 NH 3 PbI 3 was changed to hexagonal PbI 2 . With Sb 2 S 3, on the other hand, the CH 3 NH 3 PbI 3 solar cells became stable against light exposure without encapsulation, which did not change the crystal structure or the wavelength edges of absorption and IPCE. Therefore, it was believed that degradation can occur at the interface between TiO 2 and CH 3 NH 3 PbI 3 .
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Noh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
Liu, D., & Kelly, T. L. (2014) · Nature Photonics · doi:10.1038/nphoton.2013.342 · Cited by 2,663
Mesoscopic CH3NH3PbI3/TiO2Heterojunction Solar Cells
Etgar, L., Gao, P., Xue, Z., Peng, Q., Chandiran, A. K., Liu, B., Nazeeruddin, M. K., & Grätzel, M. (2012) · Journal of the American Chemical Society · doi:10.1021/ja307789s · Cited by 1,946
Dynamic disorder in methylammoniumtrihalogenoplumbates (II) observed by millimeter-wave spectroscopy
Poglitsch, A., & Weber, D. (1987) · The Journal of Chemical Physics · doi:10.1063/1.453467 · Cited by 1,625
Wang, J. T.-W., Ball, J. M., Barea, E. M., Abate, A., Alexander-Webber, J. A., Huang, J., Saliba, M., Mora-Sero, I., Bisquert, J., Snaith, H. J., et al. (2014) · Nano Letters · doi:10.1021/nl403997a · Cited by 1,072
First-Principles Modeling of Mixed Halide Organometal Perovskites for Photovoltaic Applications
Mosconi, E., Amat, A., Nazeeruddin, M. K., Grätzel, M., & De Angelis, F. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp4048659 · Cited by 976
Cation rotation in methylammonium lead halides
Wasylishen, R. E., Knop, O., & Macdonald, J. B. (1985) · Solid State Communications · doi:10.1016/0038-1098(85)90959-7 · Cited by 355
Cited by
High-Efficiency Perovskite Solar Cells
Kim, J. Y., Lee, J.-W., Jung, H. S., Shin, H., & Park, N.-G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00107 · Cited by 2,800
Challenges for commercializing perovskite solar cells
Rong, Y., Hu, Y., Mei, A., Tan, H., Saidaminov, M. I., Seok, S. I., McGehee, M. D., Sargent, E. H., & Han, H. (2018) · Science · doi:10.1126/science.aat8235 · Cited by 2,140
Review of recent progress in chemical stability of perovskite solar cells
Niu, G., Guo, X., & Wang, L. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04994b · Cited by 1,965
Organometal halide perovskite solar cells: degradation and stability
Berhe, T. A., Su, W.-N., Chen, C.-H., Pan, C.-J., Cheng, J.-H., Chen, H.-M., Tsai, M.-C., Chen, L.-Y., Dubale, A. A., & Hwang, B.-J. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02733k · Cited by 1,779
Formamidinium and Cesium Hybridization for Photo‐ and Moisture‐Stable Perovskite Solar Cell
Lee, J., Kim, D., Kim, H., Seo, S., Cho, S. M., & Park, N. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501310 · Cited by 1,663
Mesoporous materials for energy conversion and storage devices
Li, W., Liu, J., & Zhao, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.23 · Cited by 1,388
A Review of Perovskites Solar Cell Stability
Wang, R., Mujahid, M., Duan, Y., Wang, Z., Xue, J., & Yang, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808843 · Cited by 1,310
Colloidally prepared La-doped BaSnO 3 electrodes for efficient, photostable perovskite solar cells
Shin, S. S., Yeom, E. J., Yang, W. S., Hur, S., Kim, M. G., Im, J., Seo, J., Noh, J. H., & Seok, S. I. (2017) · Science · doi:10.1126/science.aam6620 · Cited by 1,163
Under the spotlight: The organic–inorganic hybrid halide perovskite for optoelectronic applications
Chen, Q., De Marco, N., Yang, Y. (., Song, T.-B., Chen, C.-C., Zhao, H., Hong, Z., Zhou, H., & Yang, Y. (2015) · Nano Today · doi:10.1016/j.nantod.2015.04.009 · Cited by 1,154
Lewis Acid–Base Adduct Approach for High Efficiency Perovskite Solar Cells
Lee, J.-W., Kim, H.-S., & Park, N.-G. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00440 · Cited by 1,067
Kim, H.-S., & Park, N.-G. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501392m · Cited by 1,065
Stability of perovskite solar cells
Wang, D., Wright, M., Elumalai, N. K., & Uddin, A. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.12.025 · Cited by 998
Light-activated photocurrent degradation and self-healing in perovskite solar cells
Nie, W., Blancon, J.-C., Neukirch, A. J., Appavoo, K., Tsai, H., Chhowalla, M., Alam, M. A., Sfeir, M. Y., Katan, C., Even, J., et al. (2016) · Nature Communications · doi:10.1038/ncomms11574 · Cited by 743
Long-term operating stability in perovskite photovoltaics
Zhu, H., Teale, S., Lintangpradipto, M. N., Mahesh, S., Chen, B., McGehee, M. D., Sargent, E. H., & Bakr, O. M. (2023) · Nature Reviews Materials · doi:10.1038/s41578-023-00582-w · Cited by 739
Wang, S., Jiang, Y., Juarez-Perez, E. J., Ono, L. K., & Qi, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2016.195 · Cited by 661
Review on the Application of SnO2 in Perovskite Solar Cells
Xiong, L., Guo, Y., Wen, J., Liu, H., Yang, G., Qin, P., & Fang, G. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201802757 · Cited by 653
Li, W., Zhang, W., Van Reenen, S., Sutton, R. J., Fan, J., Haghighirad, A. A., Johnston, M. B., Wang, L., & Snaith, H. J. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03522h · Cited by 615
Trapped charge-driven degradation of perovskite solar cells
Ahn, N., Kwak, K., Jang, M. S., Yoon, H., Lee, B. Y., Lee, J.-K., Pikhitsa, P. V., Byun, J., & Choi, M. (2016) · Nature Communications · doi:10.1038/ncomms13422 · Cited by 606
Stability of Perovskite Solar Cells: A Prospective on the Substitution of the A Cation and X Anion
Wang, Z., Shi, Z., Li, T., Chen, Y., & Huang, W. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201603694 · Cited by 595
Roy, P., Kumar Sinha, N., Tiwari, S., & Khare, A. (2020) · Solar Energy · doi:10.1016/j.solener.2020.01.080 · Cited by 541
Multifunctional Fullerene Derivative for Interface Engineering in Perovskite Solar Cells
Li, Y., Zhao, Y., Chen, Q., Yang, Y. (., Liu, Y., Hong, Z., Liu, Z., Hsieh, Y.-T., Meng, L., Li, Y., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b10614 · Cited by 539
Gas chromatography–mass spectrometry analyses of encapsulated stable perovskite solar cells
Shi, L., Bucknall, M. P., Young, T. L., Zhang, M., Hu, L., Bing, J., Lee, D. S., Kim, J., Wu, T., Takamure, N., et al. (2020) · Science · doi:10.1126/science.aba2412 · Cited by 488
Frontiers, opportunities, and challenges in perovskite solar cells: A critical review
Ansari, M. I. H., Qurashi, A., & Nazeeruddin, M. K. (2018) · Journal of Photochemistry and Photobiology C: Photochemistry Reviews · doi:10.1016/j.jphotochemrev.2017.11.002 · Cited by 485
Interface and Defect Engineering for Metal Halide Perovskite Optoelectronic Devices
Han, T., Tan, S., Xue, J., Meng, L., Lee, J., & Yang, Y. (2019) · Advanced Materials · doi:10.1002/adma.201803515 · Cited by 481
Beyond Efficiency: the Challenge of Stability in Mesoscopic Perovskite Solar Cells
Rong, Y., Liu, L., Mei, A., Li, X., & Han, H. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501066 · Cited by 473
Defect passivation strategies in perovskites for an enhanced photovoltaic performance
Fu, L., Li, H., Wang, L., Yin, R., Li, B., & Yin, L. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01767a · Cited by 463
Yu, Z., & Sun, L. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500213 · Cited by 462
Fully Printable Mesoscopic Perovskite Solar Cells with Organic Silane Self-Assembled Monolayer
Liu, L., Mei, A., Liu, T., Jiang, P., Sheng, Y., Zhang, L., & Han, H. (2015) · Journal of the American Chemical Society · doi:10.1021/ja5125594 · Cited by 460
Recent Progress on the Long‐Term Stability of Perovskite Solar Cells
Fu, Q., Tang, X., Huang, B., Hu, T., Tan, L., Chen, L., & Chen, Y. (2018) · Advanced Science · doi:10.1002/advs.201700387 · Cited by 454
Advances in hole transport materials engineering for stable and efficient perovskite solar cells
Bakr, Z. H., Wali, Q., Fakharuddin, A., Schmidt-Mende, L., Brown, T. M., & Jose, R. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.02.025 · Cited by 455
Dunfield, S. P., Bliss, L., Zhang, F., Luther, J. M., Zhu, K., van Hest, M. F. A. M., Reese, M. O., & Berry, J. J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201904054 · Cited by 435
Rajagopal, A., Yao, K., & Jen, A. K. ‐. (2018) · Advanced Materials · doi:10.1002/adma.201800455 · Cited by 429
Interfaces in Perovskite Solar Cells
Shi, J., Xu, X., Li, D., & Meng, Q. (2015) · Small · doi:10.1002/smll.201403534 · Cited by 395
Development of encapsulation strategies towards the commercialization of perovskite solar cells
Ma, S., Yuan, G., Zhang, Y., Yang, N., Li, Y., & Chen, Q. (2022) · Energy & Environmental Science · doi:10.1039/d1ee02882k · Cited by 395
UV Degradation and Recovery of Perovskite Solar Cells
Lee, S.-W., Kim, S., Bae, S., Cho, K., Chung, T., Mundt, L. E., Lee, S., Park, S., Park, H., Schubert, M. C., et al. (2016) · Scientific Reports · doi:10.1038/srep38150 · Cited by 387
Interfacial Assembly and Applications of Functional Mesoporous Materials
Duan, L., Wang, C., Zhang, W., Ma, B., Deng, Y., Li, W., & Zhao, D. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00236 · Cited by 368
Yeo, J.-S., Kang, R., Lee, S., Jeon, Y.-J., Myoung, N., Lee, C.-L., Kim, D.-Y., Yun, J.-M., Seo, Y.-H., Kim, S.-S., et al. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.12.022 · Cited by 358
Recent Advances in Improving the Stability of Perovskite Solar Cells
Tiep, N. H., Ku, Z., & Fan, H. J. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501420 · Cited by 356
Enhancing Stability of Perovskite Solar Cells to Moisture by the Facile Hydrophobic Passivation
Hwang, I., Jeong, I., Lee, J., Ko, M. J., & Yong, K. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b04490 · Cited by 351
Interfaces in Perovskite Solar Cells
Fakharuddin, A., Schmidt‐Mende, L., Garcia‐Belmonte, G., Jose, R., & Mora‐Sero, I. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700623 · Cited by 349
Tin Oxide Electron‐Selective Layers for Efficient, Stable, and Scalable Perovskite Solar Cells
Altinkaya, C., Aydin, E., Ugur, E., Isikgor, F. H., Subbiah, A. S., De Bastiani, M., Liu, J., Babayigit, A., Allen, T. G., Laquai, F., et al. (2021) · Advanced Materials · doi:10.1002/adma.202005504 · Cited by 348
Material and Device Stability in Perovskite Solar Cells
Kim, H., Seo, J., & Park, N. (2016) · ChemSusChem · doi:10.1002/cssc.201600915 · Cited by 346
Soe, C. M. M., Nie, W., Stoumpos, C. C., Tsai, H., Blancon, J., Liu, F., Even, J., Marks, T. J., Mohite, A. D., & Kanatzidis, M. G. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201700979 · Cited by 341
Dimensionality engineering of hybrid halide perovskite light absorbers
Gao, P., Bin Mohd Yusoff, A. R., & Nazeeruddin, M. K. (2018) · Nature Communications · doi:10.1038/s41467-018-07382-9 · Cited by 333
Fundamental Understanding of Photocurrent Hysteresis in Perovskite Solar Cells
Liu, P., Wang, W., Liu, S., Yang, H., & Shao, Z. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803017 · Cited by 321
Development of Dopant‐Free Organic Hole Transporting Materials for Perovskite Solar Cells
Pham, H. D., Yang, T. C., Jain, S. M., Wilson, G. J., & Sonar, P. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903326 · Cited by 301
A Review of Inorganic Hole Transport Materials for Perovskite Solar Cells
Kung, P., Li, M., Lin, P., Chiang, Y., Chan, C., Guo, T., & Chen, P. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201800882 · Cited by 293
Perovskites-Based Solar Cells: A Review of Recent Progress, Materials and Processing Methods
Shi, Z., & Jayatissa, A. H. (2018) · Materials · doi:10.3390/ma11050729 · Cited by 291
High-efficiency humidity-stable planar perovskite solar cells based on atomic layer architecture
Koushik, D., Verhees, W. J. H., Kuang, Y., Veenstra, S., Zhang, D., Verheijen, M. A., Creatore, M., & Schropp, R. E. I. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02687g · Cited by 285
Halide Perovskites: A New Era of Solution‐Processed Electronics
Younis, A., Lin, C., Guan, X., Shahrokhi, S., Huang, C., Wang, Y., He, T., Singh, S., Hu, L., Retamal, J. R. D., et al. (2021) · Advanced Materials · doi:10.1002/adma.202005000 · Cited by 282
Impact of Interfacial Layers in Perovskite Solar Cells
Cho, A., & Park, N. (2017) · ChemSusChem · doi:10.1002/cssc.201701095 · Cited by 281
Nanostructuring Mixed‐Dimensional Perovskites: A Route Toward Tunable, Efficient Photovoltaics
Koh, T. M., Shanmugam, V., Schlipf, J., Oesinghaus, L., Müller‐Buschbaum, P., Ramakrishnan, N., Swamy, V., Mathews, N., Boix, P. P., & Mhaisalkar, S. G. (2016) · Advanced Materials · doi:10.1002/adma.201506141 · Cited by 271
Zheng, H., Liu, G., Zhu, L., Ye, J., Zhang, X., Alsaedi, A., Hayat, T., Pan, X., & Dai, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800051 · Cited by 265
Fullerene derivative anchored SnO2 for high-performance perovskite solar cells
Liu, K., Chen, S., Wu, J., Zhang, H., Qin, M., Lu, X., Tu, Y., Meng, Q., & Zhan, X. (2018) · Energy & Environmental Science · doi:10.1039/c8ee02172d · Cited by 261
All-inorganic CsPbBr3 perovskite: a promising choice for photovoltaics
Ullah, S., Wang, J., Yang, P., Liu, L., Yang, S.-E., Xia, T., Guo, H., & Chen, Y. (2021) · Materials Advances · doi:10.1039/d0ma00866d · Cited by 261
Mechanisms and Suppression of Photoinduced Degradation in Perovskite Solar Cells
Wei, J., Wang, Q., Huo, J., Gao, F., Gan, Z., Zhao, Q., & Li, H. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202002326 · Cited by 260
Solution‐Processable Perovskite Solar Cells toward Commercialization: Progress and Challenges
Wang, P., Wu, Y., Cai, B., Ma, Q., Zheng, X., & Zhang, W. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201807661 · Cited by 255
Kosasih, F. U., & Ducati, C. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.02.055 · Cited by 86
Degradation of inverted architecture CH3NH3PbI3‐xC lx perovskite solar cells due to trapped moisture
Bracher, C., Freestone, B. G., Mohamad, D. K., Smith, J. A., & Lidzey, D. G. (2018) · Energy Science & Engineering · doi:10.1002/ese3.180 · Cited by 27
Metadata
- Authors
- Ito, S., Tanaka, S., Manabe, K., & Nishino, H.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-05-23
- Volume
- 118
- Issue
- 30
- Pages
- 16995-17000
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2321732853
- Cited by
- 585
- References
- 11
- FWCI
- 33.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.