The DOI matches its Crossref record; 57 of the 57 references it cites were found in a registry or an index.
Quantitative Mapping of the Elastic Modulus of Soft Materials with HarmoniX and PeakForce QNM AFM Modes
Abstract
The modulus of elasticity of soft materials on the nanoscale is of interest when studying thin films, nanocomposites, and biomaterials. Two novel modes of atomic force microscopy (AFM) have been introduced recently: HarmoniX and PeakForce QNM. Both modes produce distribution maps of the elastic modulus over the sample surface. Here we investigate the question of how quantitative these maps are when studying soft materials. Three different polymers with a macroscopic Young's modulus of 0.6-0.7 GPa (polyurethanes) and 2.7 GPa (polystyrene) are analyzed using these new modes. The moduli obtained are compared to the data measured with the other commonly used techniques, dynamic mechanical analyzer (DMA), regular AFM, and nanoindenter. We show that the elastic modulus is overestimated in both the HarmoniX and PeakForce QNM modes when using regular sharp probes because of excessively overstressed material in the samples. We further demonstrate that both AFM modes can work in the linear stress-strain regime when using a relatively dull indentation probe (starting from ~210 nm). The analysis of the elasticity models to be used shows that the JKR model should be used for the samples considered here instead of the DMT model, which is currently implemented in HarmoniX and PeakForce QNM modes. Using the JKR model and ~240 nm AFM probe in the PeakForce QNM mode, we demonstrate that a quantitative mapping of the elastic modulus of polymeric materials is possible. A spatial resolution of ~50 nm and a minimum 2 to 3 nm indentation depth are achieved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Oliver, W. C., & Pharr, G. M. (2004) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2004.0002 · Cited by 8,190
Surface energy and the contact of elastic solids
Johnson, K. L., Kendall, K., & Roberts, A. D. (1971) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1971.0141 · Cited by 8,061
Effect of contact deformations on the adhesion of particles
Derjaguin, B. V., Muller, V. M., & Toporov, Y. P. (1975) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(75)90018-1 · Cited by 4,589
Calibration of atomic-force microscope tips
Hutter, J. L., & Bechhoefer, J. (1993) · Review of Scientific Instruments · doi:10.1063/1.1143970 · Cited by 4,194
Force measurements with the atomic force microscope: Technique, interpretation and applications
Butt, H.-J., Cappella, B., & Kappl, M. (2005) · Surface Science Reports · doi:10.1016/j.surfrep.2005.08.003 · Cited by 3,709
Dynamic atomic force microscopy methods
García, R. (2002) · Surface Science Reports · doi:10.1016/s0167-5729(02)00077-8 · Cited by 2,076
Nanomechanical analysis of cells from cancer patients
Cross, S. E., Jin, Y.-S., Rao, J., & Gimzewski, J. K. (2007) · Nature Nanotechnology · doi:10.1038/nnano.2007.388 · Cited by 1,908
Force-distance curves by atomic force microscopy
Cappella, B., & Dietler, G. (1999) · Surface Science Reports · doi:10.1016/s0167-5729(99)00003-5 · Cited by 1,694
Surface forces and surface interactions
Tabor, D. (1977) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(77)90366-6 · Cited by 1,265
Determination of Elastic Moduli of Thin Layers of Soft Material Using the Atomic Force Microscope
Dimitriadis, E. K., Horkay, F., Maresca, J., Kachar, B., & Chadwick, R. S. (2002) · Biophysical Journal · doi:10.1016/s0006-3495(02)75620-8 · Cited by 1,230
Length-scale-dependent deformation mechanisms in incoherent metallic multilayered composites
Misra, A., Hirth, J. P., & Hoagland, R. G. (2005) · Acta Materialia · doi:10.1016/j.actamat.2005.06.025 · Cited by 1,138
Measurement of mechanical properties by ultra-low load indentation
Pharr, G. M. (1998) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(98)00724-2 · Cited by 1,088
Scaling, dimensional analysis, and indentation measurements
Cheng, Y.-T., & Cheng, C.-M. (2004) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2004.05.001 · Cited by 1,061
Manufacturing Processes for Engineering Materials
Kalpakjian, S. (1984) · Cited by 900
Elastic analysis of some punch problems for a layered medium
King, R. B. (1987) · International Journal of Solids and Structures · doi:10.1016/0020-7683(87)90116-8 · Cited by 898
Manufacturing processes for engineering materials
SHAW, M. C. (1985) · International Journal of Machine Tool Design and Research · doi:10.1016/0020-7357(85)90061-7 · Cited by 794
Elasticity of normal and cancerous human bladder cells studied by scanning force microscopy
Lekka, M., Laidler, P., Gil, D., Lekki, J., Stachura, Z., & Hrynkiewicz, A. Z. (1999) · European Biophysics Journal · doi:10.1007/s002490050213 · Cited by 748
Introduction to Contact Mechanics
Fischer-Cripps, A. C. (2007) · Mechanical Engineering Series · doi:10.1007/978-0-387-68188-7 · Cited by 730
Interfacial toughness measurements for thin films on substrates
Volinsky, A. A., Moody, N. R., & Gerberich, W. W. (2002) · Acta Materialia · doi:10.1016/s1359-6454(01)00354-8 · Cited by 663
Measuring the Elastic Properties of Thin Polymer Films with the Atomic Force Microscope
Domke, J., & Radmacher, M. (1998) · Langmuir · doi:10.1021/la9713006 · Cited by 636
Relative Microelastic Mapping of Living Cells by Atomic Force Microscopy
A-Hassan, E., Heinz, W. F., Antonik, M. D., D’Costa, N. P., Nageswaran, S., Schoenenberger, C.-A., & Hoh, J. H. (1998) · Biophysical Journal · doi:10.1016/s0006-3495(98)77868-3 · Cited by 552
Measuring the elastic properties of anisotropic materials by means of indentation experiments
Vlassak, J. J., & Nix, W. D. (1994) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(94)90033-7 · Cited by 551
Nanoindentation of polymers: an overview
VanLandingham, M. R., Villarrubia, J. S., Guthrie, W. F., & Meyers, G. F. (2001) · Macromolecular Symposia · doi:10.1002/1521-3900(200103)167:1<15::aid-masy15>3.0.co;2-t · Cited by 509
An atomic force microscope tip designed to measure time-varying nanomechanical forces
Sahin, O., Magonov, S., Su, C., Quate, C. F., & Solgaard, O. (2007) · Nature Nanotechnology · doi:10.1038/nnano.2007.226 · Cited by 481
Biomechanics and biophysics of cancer cells☆
SURESH, S. (2007) · Acta Materialia · doi:10.1016/j.actamat.2007.04.022 · Cited by 467
Surface and Interfacial Forces
Butt, H., & Kappl, M. (2010) · Wiley eBooks · doi:10.1002/9783527629411 · Cited by 435
Mechanical strength of abalone nacre: Role of the soft organic layer
Meyers, M. A., Lin, A. Y.-M., Chen, P.-Y., & Muyco, J. (2008) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2007.03.001 · Cited by 427
Smart Nanocarrier Based on PEGylated Hyaluronic Acid for Cancer Therapy
Choi, K. Y., Yoon, H. Y., Kim, J.-H., Bae, S. M., Park, R.-W., Kang, Y. M., Kim, I.-S., Kwon, I. C., Choi, K., Jeong, S. Y., et al. (2011) · ACS Nano · doi:10.1021/nn202070n · Cited by 399
Lévy, R., & Maaloum, M. (2002) · Nanotechnology · doi:10.1088/0957-4484/13/1/307 · Cited by 366
Atomic force microscopy detects differences in the surface brush of normal and cancerous cells
Iyer, S., Gaikwad, R. M., Subba-Rao, V., Woodworth, C. D., & Sokolov, I. (2009) · Nature Nanotechnology · doi:10.1038/nnano.2009.77 · Cited by 352
Self-citationLin, D. C., Shreiber, D. I., Dimitriadis, E. K., & Horkay, F. (2009) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-008-0139-9 · Cited by 320
A review of analysis methods for sub-micron indentation testing
Fischer-Cripps, A. C. (2000) · Vacuum · doi:10.1016/s0042-207x(00)00377-8 · Cited by 319
Cho, H.-J., Yoon, I.-S., Yoon, H. Y., Koo, H., Jin, Y.-J., Ko, S.-H., Shim, J.-S., Kim, K., Kwon, I. C., & Kim, D.-D. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2011.10.064 · Cited by 267
Grierson, D. S., Flater, E. E., & Carpick, R. W. (2005) · Journal of Adhesion Science and Technology · doi:10.1163/1568561054352685 · Cited by 237
Quantitative mapping of elastic moduli at the nanoscale in phase separated polyurethanes by AFM
Schön, P., Bagdi, K., Molnár, K., Markus, P., Pukánszky, B., & Julius Vancso, G. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2010.09.029 · Cited by 220
Calibration of atomic force microscope
Masalska, A., Zawierucha, P., Woszczyna, M., Gotszalk, T. P., Ritz, Y., & Zschech, E. (2008) · Elektronika : konstrukcje, technologie, zastosowania · Cited by 211
Human epithelial cells increase their rigidity with ageing in vitro: direct measurements
Berdyyeva, T. K., Woodworth, C. D., & Sokolov, I. (2005) · Physics in Medicine and Biology · doi:10.1088/0031-9155/50/1/007 · Cited by 196
Self-citationCharacterization of application-specific probes for SPMs:
Tortonese, M., & Kirk, M. (1997) · SPIE Proceedings · doi:10.1117/12.271229 · Cited by 181
Clifford, C. A., & Seah, M. P. (2005) · Nanotechnology · doi:10.1088/0957-4484/16/9/044 · Cited by 181
Sweers, K., van der Werf, K., Bennink, M., & Subramaniam, V. (2011) · Nanoscale Research Letters · doi:10.1186/1556-276x-6-270 · Cited by 175
Clifford, C. A., & Seah, M. P. (2005) · Applied Surface Science · doi:10.1016/j.apsusc.2005.08.090 · Cited by 163
Lin, D. C., Dimitriadis, E. K., & Horkay, F. (2007) · Journal of Biomechanical Engineering · doi:10.1115/1.2800826 · Cited by 162
Dokukin, M. E., & Sokolov, I. (2012) · Macromolecules · doi:10.1021/ma202600b · Cited by 162
Self-citationTranchida, D., Piccarolo, S., & Soliman, M. (2006) · Macromolecules · doi:10.1021/ma052727j · Cited by 147
Targeted Luminescent Near-Infrared Polymer-Nanoprobes for In Vivo Imaging of Tumor Hypoxia
Napp, J., Behnke, T., Fischer, L. H., Würth, C., Wottawa, M., Katschinski, D. M., Alves, F., Resch‐Genger, U., & Schäferling, M. (2011) · Analytical Chemistry · doi:10.1021/ac201870b · Cited by 134
Jiang, X., Sha, X., Xin, H., Chen, L., Gao, X., Wang, X., Law, K., Gu, J., Chen, Y., Jiang, Y., et al. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.08.055 · Cited by 124
Damage-resistant alumina-based layer composites
An, L., Chan, H. M., Padture, N. P., et al. (1996) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.1996.0025 · Cited by 116
Godovsky, Y. K., & Magonov, S. (2000) · Langmuir · doi:10.1021/la990846k · Cited by 86
Nanomechanical measurements with AFM in the elastic limit
Withers, J. R., & Aston, D. E. (2006) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2006.03.002 · Cited by 73
Gates, R. S., & Reitsma, M. G. (2007) · Review of Scientific Instruments · doi:10.1063/1.2764372 · Cited by 70
Tranchida, D., Kiflie, Z., Acierno, S., & Piccarolo, S. (2009) · Measurement Science and Technology · doi:10.1088/0957-0233/20/9/095702 · Cited by 63
Tang, Y. W., Labow, R. S., Revenko, I., & Santerre, J. P. (2002) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856202320253965 · Cited by 60
Zhang, G., Liu, Y., Yuan, Q., Zong, C., Liu, J., & Lu, L. (2011) · Nanoscale · doi:10.1039/c1nr10736d · Cited by 60
AFM nanoindentation of viscoelastic materials with large end‐radius probes
Moeller, G. (2009) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21758 · Cited by 44
Tranchida, D., & Piccarolo, S. (2005) · Macromolecular Rapid Communications · doi:10.1002/marc.200500538 · Cited by 42
AFM Detection of GPI Protein Insertion into DOPC/DPPC Model Membranes
Milhiet, P., Giocondi, M., Baghdadi, O., Ronzon, F., Grimellec, C. L., & Roux, B. (2002) · Single Molecules · Cited by 30
El‐Sayed, A., Masuda, T., Akita, H., & Harashima, H. (2011) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.22807 · Cited by 17
Cited by
Bioinspired super-strong aqueous synthetic tissue adhesives
Li, Q., Song, W., Li, J., Ma, C., Zhao, X., Jiao, J., Mrowczynski, O., Webb, B. S., Rizk, E. B., Lu, D., et al. (2022) · Matter · doi:10.1016/j.matt.2021.12.018 · Cited by 58
Liu, W., Wang, Y., Xiang, S., & Liu, H. (2024) · Polymer · doi:10.1016/j.polymer.2024.126815 · Cited by 55
Ye, G., Yong, Q., Hu, L., Rosqvist, E., Peltonen, J., Hu, Y., Xu, W., & Xu, C. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.141371 · Cited by 9
Metadata
- Authors
- Dokukin, M. E., & Sokolov, I.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-11-12
- Volume
- 28
- Issue
- 46
- Pages
- 16060-16071
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2054245765
- Cited by
- 385
- References
- 57
- FWCI
- 8.64
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.